Unique Hydrophobization and Hybridization via Direct Phase Transfer of ZrO2 Nanoparticles from Water to Toluene Producing Highly Transparent Polystyrene and Poly(methyl methacrylate) Hybrid Bulk Materials

Development of Novel Triazine-Based Poly(phenylene sulfide)s with High Refractive Index and Low Birefringence

High-refractive-index (high-n) polymers with a high optical transparency and low birefringence (Δn) have been desired in progressive optoelectronic devices. However, the trade-off between high-n and low-Δn remains a challenge at present. Here, the development of a novel array of high-n, high-sulfur-containing, highly transparent, colorless poly(phenylene sulfide) (PPS) polymers bearing triazine units in the main chains is reported. Six new triazine monomers T1-T6 with various pendant groups via different linkers (-O- and -NH-) could be prepared for developing PPSs with high-n and low Δn values. These PPSs (P1-P6) were obtained by the polycondensation of T1-T6 with commercial aromatic dithiol, 4,4'-thiobisbenzenethiol, respectively, which showed very high-n values (n av: 1.6902-1.7169 at 633 nm), high optical transparency (T % > 90% @ 400 nm), and low birefringence (Δn = 0.0015-0.0042). All the PPSs displayed high n ∞ values (1.6340-1.6654), providing valuable information for the development of high-n triazine-based PPS materials for application not only in the visible region but also in the near-infrared region.

Surface Modifier-Free Organic-Inorganic Hybridization To Produce Optically Transparent and Highly Refractive Bulk Materials Composed of Epoxy Resins and ZrO2 Nanoparticles

Surface modifier-free hybridization of ZrO₂ nanoparticles (NPs) with epoxy-based polymers is demonstrated for the first time to afford highly transparent and refractive bulk materials. This is achieved by a unique and versatile hybridization via the one-pot direct phase transfer of ZrO₂ NPs from water to epoxy monomers without any aggregation followed by curing with anhydride. Three types of representative epoxy monomers, bisphenol A diglycidyl ether (BADGE), 3,4-epoxycyclohexylmethyl-3',4'-epoxycyclohexane carboxylate (CEL), and 1,3,5-tris(3-(oxiran-2-yl)propyl)-1,3,5-triazinane-2,4,6-trione (TEPIC), are used to produce transparent viscous dispersions. The resulting ZrO₂ NPs are thoroughly characterized using dynamic light scattering (DLS), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR), and solid-state ¹³C CP/MAS NMR measurements. The results from DLS and TEM analyses indicate nanodispersion of ZrO₂ into epoxy monomers as a continuous medium. A surface modification mechanism and the binding fashion during phase transfer are proposed based on the FT-IR and solid-state ¹³C CP/MAS NMR measurements. Epoxy-based hybrid materials with high transparency and refractive index are successfully fabricated by heat curing or polymerizing a mixture of monomers containing epoxy-functionalized ZrO₂ NPs and methylhexahydrophthalic anhydride in the presence of a phosphoric catalyst. The TEM and small-angle X-ray scattering measurements of the hybrids show a nanodispersion of ZrO₂ in the epoxy networks. The refractive index at 594 nm ( n₅₉₄) increases up to 1.765 for BADGE-based hybrids, 1.667 for CEL-based hybrids, and 1.693 for TEPIC-based hybrids. Their refractive indices and Abbe's numbers are quantitatively described by the Lorentz-Lorenz effective medium expansion theory. Their transmissivity is also reasonably explained using Fresnel refraction, Rayleigh scattering, and the Lambert-Beer theories. This surface modifier-free hybridization provides a versatile, fascinating, and promising method for synthesizing a variety of epoxy-based hybrid materials.