Improved Transistor Performance of Isoindigo-Based Conjugated Polymers by Chemically Blending Strongly Electron-Deficient Units with Low Content To Optimize Crystal Structure

Organic Transistors Based on Highly Crystalline Donor-Acceptor π-Conjugated Polymer of Pentathiophene and Diketopyrrolopyrrole

Oligomers and polymers consisting of multiple thiophenes are widely used in organic electronics such as organic transistors and sensors because of their strong electron-donating ability. In this study, a solution to the problem of the poor solubility of polythiophene systems was developed. A novel π-conjugated polymer material, PDPP-5Th, was synthesized by adding the electron acceptor unit, DPP, to the polythiophene system with a long alkyl side chain, which facilitated the solution processing of the material for the preparation of devices. Meanwhile, the presence of the multicarbonyl groups within the DPP molecule facilitated donor-acceptor interactions in the internal chain, which further improved the hole-transport properties of the polythiophene-based material. The weak forces present within the molecules that promoted structural coplanarity were analyzed using theoretical simulations. Furthermore, the grazing incidence wide-angle X-ray scanning (GIWAXS) results indicated that PDPP-5Th features high crystallinity, which is favorable for efficient carrier migration within and between polymer chains. The material showed hole transport properties as high as 0.44 cm2 V-1 s-1 in conductivity testing. Our investigations demonstrate the great potential of this polymer material in the field of optoelectronics.

Incorporation of Diketopyrrolopyrrole into Polythiophene for the Preparation of Organic Polymer Transistors

Polythiophene, as a class of potential electron donor units, is widely used in organic electronics such as transistors. In this work, a novel polymeric material, PDPPTT-FT, was prepared by incorporating the electron acceptor unit into the polythiophene system. The incorporation of the DPP molecule assists in improving the solubility of the material and provides a convenient method for the preparation of field effect transistors via subsequent solution processing. The introduction of fluorine atoms forms a good intramolecular conformational lock, and theoretical calculations show that the structure displays excellent co-planarity and regularity. Grazing incidence wide-angle X-ray (GIWAXS) results indicate that the PDPPTT-FT is highly crystalline, which facilitates carrier migration within and between polymer chains. The hole mobility of this π-conjugated material is as high as 0.30 cm2 V-1 s-1 in organic transistor measurements, demonstrating the great potential of this polymer material in the field of optoelectronics.

Disordered Phase-Assisted Growth of Organic Semiconductor Crystals on Self-Assembled Monolayer Templates

Achieving high mobility and bias stability is a challenging obstacle in the advancement of organic thin-film transistors (OTFTs). To this end, the fabrication of high-quality organic semiconductor (OSC) thin films is critical for OTFTs. Self-assembled monolayers (SAMs) have been used as growth templates for high-crystalline OSC thin films. Despite significant research progress in the growth of OSC on SAMs, a detailed understanding of the growth mechanism of the OSC thin films on a SAM template is lacking, which has limited its use. In this study, the effects of the structure (thickness and molecular packing) of SAM on the nucleation and growth behavior of the OSC thin films were investigated. We found that disordered SAM molecules assisted in the surface diffusion of the OSC molecules and resulted in a small nucleation density and large grain size of the OSC thin films. Moreover, a thick SAM with disordered SAM molecules on the top was found to be beneficial for the high mobility and bias stability of the OTFTs.

Enhancing the Performance of Electret-Free Phototransistor Memory by Using All-Conjugated Block Copolymer

Conjugated polymers are of great interest owing to their potential in stretchable electronics to function under complex deformation conditions. To improve the performance of conjugated polymers, various structural designs have been proposed and these conjugated polymers are specially applied in exotic optoelectronics. In this work, a series of all-conjugated block copolymers (PII2T-b-PNDI2T) comprising poly(isoindigo-bithiophene) (PII2T) and poly(naphthalenediimide-bithiophene) (PNDI2T) are developed with varied compositions and applied to electret-free phototransistor memory. Accordingly, these memory devices present p-type transport capability and electrical-ON/photo-OFF memory behavior. The efficacy of the all-conjugated block copolymer design in improving the memory-photoresponse properties in phototransistor memory is revealed. By optimizing the composition of the block copolymer, the corresponding device achieves a wide memory window of 36 V and a high memory ratio of 7 × 10⁴ . Collectively, the results of this study indicate a new concept for designing electret-free phototransistor memory by using all-conjugated block copolymer heterojunctions to mitigate the phase separation of conjugated polymer blends. Meanwhile, the intrinsic optoelectronic properties of the constituent conjugated polymers can be well-maintained by using an all-conjugated block copolymer design.

Recent Structural Engineering of Polymer Semiconductors Incorporating Hydrogen Bonds

Highly planar, extended π-electron organic conjugated polymers have been increasingly attractive for achieving high-mobility organic semiconductors. In addition to the conventional strategy to construct rigid backbone by covalent bonds, hydrogen bond has been employed extensively to increase the planarity and rigidity of polymer via intramolecular noncovalent interactions. This review provides a general summary of high-mobility semiconducting polymers incorporating hydrogen bonds in field-effect transistors over recent years. The structural engineering of the hydrogen bond-containing building blocks and the discussion of theoretical simulation, microstructural characterization, and device performance are covered. Additionally, the effects of the introduction of hydrogen bond on self-healing, stretchability, chemical sensitivity, and mechanical properties are also discussed. The review aims to help and inspire design of new high-mobility conjugated polymers with superiority of mechanical flexibility by incorporation of hydrogen bond for the application in flexible electronics.

Thickness Dependence of Electronic Structure and Optical Properties of F8BT Thin Films

Electronic devices based on polymer thin films have experienced a tremendous increase in their efficiency in the last two decades. One of the critical factors that affects the efficiency of polymer solar cells or light emitting devices is the presence of structural defects that controls non-radiative recombination. The purpose of this report is to demonstrate a non-trivial thickness dependence of optoelectronic properties and structure (dis)order in thin conductive poly(9,9-dioctyfluorene-alt-benzothiadiazole), F8BT, polymer films. The UV-Vis absorption spectra exhibited blue shift and peak broadening; significant changes in 0–0 and 0–1 radiative transition intensity was found in photoluminescence emission spectra. The density of state (DOS) was directly mapped by energy resolved-electrochemical impedance spectroscopy (ER-EIS). Satellite states 0.5 eV below the lowest unoccupied molecular orbital (LUMO) band were revealed for the thinner polymer films. Moreover, the decreasing of the deep states density in the band gap manifested an increment in the material structural ordering with increasing thickness. Changes in the ratio between crystalline phases with face-on and edge-on orientation of F8BT chains were identified in the films by grazing-incidence wide angle X-ray scattering technique. A thickness threshold in all investigated aspects of the films at a thickness of about 100 nm was observed that can be attributed to the development of J-H aggregation in the film structure and mutual interplay between these two modes. Although a specific structure–property relationship thickness threshold value may be expected for thin films prepared from various polymers, solvents and under different process conditions, the value of about 100 nm can be generally considered as the characteristic length scale of this phenomenon.

Recent advances in the application of isoindigo derivatives in materials chemistry

In this review, the data on the application of isoindigo derivatives in the chemistry of functional materials are analyzed and summarized. These bisheterocycles can be used in the creation of organic solar cells, sensors, lithium ion batteries as well as in OFET and OLED technologies. The potentials of the use of polymer structures based on isoindigo as photoactive component in the photoelectrochemical reduction of water, as matrix for MALDI spectrometry and in photothermal cancer therapy are also shown. Data published over the past 5 years, including works published at the beginning of 2021, are given.

Backbone Engineering of Diketopyrrolopyrrole-Based Conjugated Polymers through Random Terpolymerization for Improved Mobility-Stretchability Property

Conjugated polymers synthesized through random terpolymerization have recently attracted great research interest due to the synergetic effect on the polymer's crystallinity and semiconducting properties. Several studies have demonstrated the efficacy of random terpolymerization in fine-tuning the aggregation behavior and optoelectronic property of conjugated polymers to yield enhanced device performance. However, as an influential approach of backbone engineering, its efficacy in modulating the mobility-stretchability property of high-performance conjugated polymers has not been fuller explored to date. Herein, a series of random terpolymers based on the diketopyrrolopyrrole-bithiophene (DPP-2T) backbone incorporating different amounts of isoindigo (IID) unit are synthesized, and their structure-mobility-stretchability correlation is thoroughly investigated. Our results reveal that random terpolymers containing a low IID content (DPP95 and DPP90) show enhanced interchain packing and solid-state aggregation to result in improved charge-transporting performance (can reach 4 order higher) compared to the parent polymer DPP100. In addition, owing to the enriched amorphous feature, DPP95 and DPP90 deliver an improved orthogonal mobility (μ_h) of >0.01 cm² V^-1 s^-1 under a 100% strain, higher than the value (∼0.002 cm² V^-1 s^-1) of DPP100. Moreover, DPP95 even yields 20% enhanced orthogonal μ_h retention after 800 stretching-releasing cycles with 60% strain. As concluded from a series of analyses, the improved mobility-stretchability property exerted by random terpolymerization arises from the enriched amorphous feature and enhanced aggregation behavior imposed by the geometry mismatch between different acceptors (DPP and IID). This study demonstrates that backbone engineering through rational random terpolymerization not only enhances the mobility-stretchability of a conjugated polymer but also realizes a better mechanical endurance, providing a new perspective for the design of high-performance stretchable conjugated polymers.

Air-Stable and High-Performance Unipolar n-Type Conjugated Semiconducting Polymers Prepared by a "Strong Acceptor-Weak Donor" Strategy

Unipolar n-type conjugated polymer materials with long-term stable electron transport upon direct exposure to the air atmosphere are very challenging to prepare. In this study, three unipolar n-type donor-acceptor (D-A) conjugated polymer semiconductors (abbreviated as PNVB, PBABDFV, and PBAIDV) were successfully developed through a "strong acceptor-weak donor" strategy. The weak electron donation of the donor units in all three polymers successfully lowered the molecular energy levels by the acceptor units that strongly attracted electrons. Cyclic voltammetry demonstrated that all three polymers had low highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels near -6.0 and -4.0 eV, respectively. These results were consistent with the density functional theory calculations. The as-prepared polymers were then used to manufacture organic field-effect transistor (OFET) devices in bottom-gate/top-contact (BG/TC) configuration without any packaging protection. As expected, all devices exhibited unipolar electron transport properties. PBABDFV-based devices showed excellent field-effect performance and air stability, beneficial for straight-line molecular chain and closest π-π stacking distance to prevent water vapor and oxygen from diffusion into the active layer. This led to a maximum electron mobility (μ_e,max) of 0.79 cm² V^-1 s^-1 under air conditions. In addition, 0.50 cm² V^-1 s^-1 was still maintained after 27 days of storage in ambient environment. The near-ideal transfer curve of the PBABDFV-based OFET device in BG/TC configuration under vacuum was obtained with average mobility reliability factor (r_ave) reaching 88%.

Asymmetric Side-Chain Engineering of Isoindigo-Based Polymers for Improved Stretchability and Applications in Field-Effect Transistors

Thus far, there is still no study systematically investigating the influence of asymmetric side-chain design on a polymer's stretchability and its associated stretchable device applications. Herein, three kinds of asymmetric side chains consisting of carbosilane side chain (Si-C8), siloxane-terminated side chain (SiO-C8), and decyltetradecane side chain (DT) are engineered in isoindigo-bithiophene (PII2T, P1-P3) and isoindigo-difluorobithiophene (PII2TF, P4-P6) conjugated polymers, and their structure-stretchability correlation is explored in field-effect transistor characterization. It is revealed that owing to the geometric difference between the side chains, different asymmetric side-chain combinations impose distinct influences on the molecular stacking and orientation of the derived polymers. Surprisingly, the combination of asymmetric side chains and backbone fluorination is shown to deliver the best stretchability and mechanical durability of the derived polymer. Consequently, P6 consisting of asymmetric Si-C8/DT side chains and fluorinated backbone possesses the best mobility preservation of 81% at 100% strain with the stretching force perpendicular to the charge-transporting direction. Moreover, it presents 90% mobility retention after 400 stretching-releasing cycles with 60% strain, greatly exceeding the value (36%) of the non-fluorinated counterpart (P3). Our results suggest that the rational design of asymmetric side chains and backbone fluorination provides an efficient way to enhance the intrinsic stretchability of conjugated polymers.