Coassembly of Linear Diblock Copolymer Chains and Homopolymer Brushes on Silica Particles: A Combined Computer Simulation and Experimental Study

Archimedean Spirals with Controllable Chirality: Disk Substrate-Mediated Solution Assembly of Rod-Coil Block Copolymers

Spirals are common in nature; however, they are rarely observed in polymer self-assembly systems, and the formation mechanism is not well understood. Herein, we report the formation of two-dimensional (2D) spiral patterns via microdisk substrate-mediated solution self-assembly of polypeptide-based rod-coil block copolymers. The spiral pattern consists of multiple strands assembled from the block copolymers, and two central points are observed. The spirals fit well with the Archimedean spiral model, and their chirality is dependent on the chirality of the polypeptide blocks. As revealed by a combination of experiments and theoretical simulations, these spirals are induced by an interplay of the parallel ordering tendency of the strands and circular confinement of the microdisks. This work presents the first example regarding substrate-mediated self-assembly of block copolymers into spirals. The gained information could not only enhance our understanding of natural spirals but also assist in both the controllable preparations and applications of spiral nanostructures.

Synthesis of Polymer Brushes on Tannic Acid-Coated Copper Particles and Surface Co-Assembly

The synthesis of polymer brushes on inorganic particles is an effective approach to surface modification. The polymer brushes on the surface endow the substrates with new surface properties. However, the lack of functional groups and the difficulty of surface modification have made it difficult to develop an effective method for the synthesis of polymer brushes on metal surfaces. Herein, a simple and versatile strategy for synthesizing polymer brushes on copper particles is reported. Tannic acid (TA) molecules are adsorbed onto the surfaces of copper particles, forming TA coatings. Quaternized poly(2-(dimethylamino)ethyl methacrylate)-block-polystyrene (qPDMAEMA-b-PS) block copolymer (BCP) chains are grafted on the TA coatings through hydrogen bonding and electrostatic interaction, and PS brushes are grafted on the copper particles. The effects of TA concentration on the adsorption of TA and PS brush synthesis are discussed. The PS brushes are able to form surface nanostructures on the copper particles through co-assembly with PDMAEMA-b-PS BCP chains. The effect of BCP concentration on the surface nanostructures is investigated. It is reasonable to expect that polymer brushes and surface nanostructures can be synthesized on different metal surfaces by using the TA-coating approach reported in this paper.

Polymer Brushes and Surface Nanostructures: Molecular Design, Precise Synthesis, and Self-Assembly

For over two decades, polymer brushes have found wide applications in industry and scientific research. Now, polymer brush research has been a significant research focus in the community of polymer science. In this review paper, we give an introduction to the synthesis, self-assembly, and applications of one-dimensional (1D) polymer brushes on polymer backbones, two-dimensional (2D) polymer brushes on flat surfaces, and three-dimensional (3D) polymer brushes on spherical particles. Examples of the synthesis of polymer brushes on different substrates are provided. Studies on the formation of the surface nanostructures on solid surfaces are also reviewed in this article. Multicomponent polymer brushes on solid surfaces are able to self-assemble into surface micelles (s-micelles). If the s-micelles are linked to the substrates through cleavable linkages, the s-micelles can be cleaved from the substrates, and the cleaved s-micelles are able to self-assemble into hierarchical structures. The formation of the surface nanostructures by coassembly of polymer brushes and "free" polymer chains (coassembly approach) or polymerization-induced surface self-assembly approach, is discussed. The applications of the polymer brushes in colloid and biomedical science are summarized. Finally, perspectives on the development of polymer brushes are offered in this article.

Swelling and Orientation Behavior of End-Grafted Polymer Chains by In Situ Attenuated Total Reflection Fourier Transform Infrared Spectroscopy Complementing In Situ Ellipsometry

The literature lacks established concrete parameters for assigning grafted chain regimes. In this context, dichroic in situ attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy and in situ ellipsometry were used complementarily, offering new opportunities for conformational analysis of end-grafted polymer chains. Especially polymer chain orientation was studied as a new parameter, among others, for proper chain regime assignment in this report. Alkyne-functionalized poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) with a molecular weight of 49.8 kg/mol and a contour length of around 80 nm was grafted to self-assembled monolayers bearing triazole end groups as reported. Different chain regimes were generated by using three different grafting densities. ATR-FTIR spectroscopy based on the ν(C═O) stretching vibration at around 1728 cm-1 provided a new direct approach to determine the GD of polymer chains. Significant shifts in the position of the ν(C═O) band comparing dry and wet states were observed, caused by increased hydrogen bonding interactions between PDMAEMA and water. Finally, the averaged orientation of PDMAEMA chains along the z-axis was determined using dichroic ATR-FTIR spectroscopy based on the dichroic ratios of the ν(C═O) band and molecular order parameters SZ,MOL calculated thereof. High SZ,MOL values were found for the wet state compared to the dry state, confirming that all GD PDMAEMA samples are in the brush regime in the swollen state.

Surface Coassembly of Binary Mixed Polymer Brushes and Linear Block Copolymer Chains

Binary mixed polymer brushes (BMPBs) are two different homopolymer chains that are covalently anchored to the solid surfaces at high grafting densities. One feature of the BMPBs is the unique ability to make surface phase separation under external stimuli. In this research, we demonstrate that different surface nanostructures can be fabricated by surface coassembly of BMPBs and free block copolymer (BCP) chains. Polystyrene/poly(2-(dimethylamino)ethyl methacrylate) (PS/PDMAEMA) BMPBs on silica particles (PS-PDMAEMA-SiO₂) are synthesized by a two-step "grafting to" approach. PDMAEMA-b-PS block copolymer (BCP) chains and PS-PDMAEMA-SiO₂ make surface self-assembly and a variety of surface nanostructures are formed in methanol. The grafting densities of PS and PDMAEMA brushes, solvent, and the BCP structures all exert significant influences on the surface morphology. With an increase in PDMAEMA grafting density, the surface structures change from perforated layers, to rods, and to spherical surface micelles (s-micelles). The PS grafting density also exerts an effect on the formation of the surface nanostructures. At low PS grafting density, sparsely distributed s-micelles are produced, and at high density, densely distributed s-micelles are observed. Based on transmission electron microscopy and scanning electron microscopy results, a surface phase diagram is constructed, which provides a guide to the surface morphology control.

Polymer brush-based nanostructures: from surface self-assembly to surface co-assembly

Surface structures play an important role in the practical applications of materials. The synthesis of polymer brushes on a solid surface has emerged as an effective tool for tuning surface properties. The fabrication of polymer brush-based surface nanostructures has greatly facilitated the development of materials with unique surface properties. In this review article, synthetic methods used in the synthesis of polymer brushes, and self-assembly approaches applied in the fabrication of surface nanostructures including self-assembly of polymer brushes, co-assembly of polymer brushes and "free" block copolymer chains, and polymerization induced surface self-assembly, are reviewed. It is demonstrated that polymer brush-based surface nanostructures, including spherical surface micelles, wormlike surface structures, layered structures and surface vesicles, can be fabricated. Meanwhile, the challenges in the synthesis and applications of the surface nanostructures are discussed. This review is expected to be helpful for understanding the principles, methods and applications of polymer brush-based surface nanostructures.

Janus Surface Micelles on Silica Particles: Synthesis and Application in Enzyme Immobilization

In these years, synthesis and applications of Janus structures have aroused great interest for large-scale applications in chemistry and materials science. Up to now, Janus particles with different morphologies and different functionalities have been synthesized in solutions, but the synthesis of Janus particles on solid surfaces has not been touched. In this research, Janus surface micelles (JSMs) are fabricated on the surfaces of silica particles by polymerization induced surface self-assembly (PISSA) approach, and the JSMs are used for enzyme immobilization. Usually, enzyme immobilization should be able to optimize the performance of the immobilized enzymes, and an ideal immobilization system must offer protection to the immobilized enzyme with retained bioactivity. Herein, it is demonstrated that JSMs on silica particles can be used as an ideal platform for the immobilization of enzymes. To prepare JSMs, poly(2-(dimethylamino) ethyl methacrylate) macro chain transfer agent (PDMAEMA-CTA) brushes on silica particles and poly(di(ethylene glycol) methyl ether methacrylate) macro CTA (PDEGMA-CTA) are employed in reversible addition-fragmentation chain transfer dispersion polymerization of styrene. After polymerization, JSMs with polystyrene cores and PDMAEMA/PDEGMA patches on the surfaces are prepared on silica particles. After quaternization reaction, the quaternized PDMAEMA patches are used for the immobilization of enzymes. Experimental results turn out that enhanced bioactivities of the immobilized enzymes are achieved and the enzyme molecules are well protected by surface Janus structures.

Biosurfaces Fabricated by Polymerization-Induced Surface Self-Assembly

Surface biofunctionalization provides an approach to the fabrication of surfaces with improved biological and clinical performances. Biosurfaces have found increasing applications in many areas such as sensing, cell growth, and disease detection. Efficient synthesis of biosurfaces without damages to the structures and functionalities of biomolecules is a great challenge. Polymerization-induced surface self-assembly (PISSA) provides an effective approach to the synthesis of surface nanostructures with different compositions, morphologies, and properties. In this research, application of PISSA in the fabrication of biosurfaces is investigated. Two different reversible addition-fragmentation chain transfer (RAFT) agents, RAFT chain transfer agent (CTA) on silica particles (SiO₂-CTA) and CTA on bovine serum albumin (BSA-CTA), were employed in RAFT dispersion polymerization of N-isopropylacrylamide (NIPAM) in water at a temperature above the lower critical solution temperature (LCST) of poly-(isopropylacrylamide) (PNIPAM). After polymerization, PNIPAM layers with BSA on the top surfaces are fabricated on the surfaces of silica particles. Transmission electron microscopy results show that the average PNIPAM layer thickness increases with monomer conversion. Kinetics study indicates that there is a turn point on a plot of ln([M]₀/[M]_t) versus polymerization time. After the critical point, surface coassembly of PNIPAM brushes and BSA-PNIPAM bioconjugates is performed on the silica particles. The secondary structure and the activity of BSA immobilized on top of the PNIPAM layers are basically kept unchanged in the PISSA process. To prepare permanently immobilized protein surfaces, PNIPAM layers on silica particles are cross-linked. BSA on the top surfaces presents a reversible "on-off" switching property. At a temperature below the LCST of PNIPAM, the activity of the immobilized BSA is retained; however, the BSA activity decreases significantly at a temperature above the LCST because of the hydrophobic interaction between PNIPAM and BSA. Based on this approach, many different biosurfaces can be fabricated and the materials will find applications in many fields, such as enzyme immobilization, drug delivery, and tissue engineering.

Electrostatic assisted fabrication and dissociation of multi-component proteinosomes

Self-assembly of proteins into well-organized proteinosomes has attracted great interest due to the potential medical and biological applications of the structures. Herein, a new concept of electrostatic assisted fabrication of proteinosomes is proposed. The self-assembly is performed by using multi-step dialysis approach, where negatively charged bovine serum albumin-poly(N-isopropylacrylamide) (BSA-PNIPAM) bioconjugate and positively charged enzyme (lysozyme or trypsin) are initially dissolved in phosphate buffer (PB) solution at a high salt concentration, and subsequently the protein solution is dialyzed against PB solutions at low salt concentrations, resulting in the formation of biofunctional proteinosomes. Transmission electron microscopy (TEM), cryo-TEM and light scattering results all demonstrate the formation of hollow structures. The wall of a proteinosome is composed of BSA and enzyme (lysozyme or trypsin), and PNIPAM chains of the bioconjugate are in the corona stabilizing the structure. In comparison with the native enzymes, the enzyme molecules in the assemblies basically retain their bioactivities. The proteinosomes formed by BSA-PNIPAM and lysozyme can be dissociated in the presence of trypsin, and those self-assembled by BSA-PNIPAM and trypsin are able to be self-hydrolyzed, resulting in the dissociation of the structures in aqueous solution. The size and morphology changes of the proteinosomes in the hydrolysis are studied.

Ordered Surface Nanostructures Self-Assembled from Rod-Coil Block Copolymers on Microspheres

An ordered surface nanostructure endows materials advanced functions. However, fabricating ordered surface-patterned particles via the polymer self-assembly approach is a challenge. Here we report that poly(γ-benzyl-l-glutamate)-block-poly(ethylene glycol) rod-coil block copolymers are able to form uniform-surface micelles on polystyrene microspheres through a solution self-assembly approach. The size of the surface micelles can be varied by the molecular weight of the block copolymers. These surface micelles are arranged in a manner consistent with the Euler theorem. Most of the micelles are six-fold coordinated, and the number difference between the five-fold and the seven-fold coordination is 12. Simulations on model systems qualitatively reproduced the experimental findings and provided direct observations for the surface-patterned particles, including the polymer chain packing manner in surface micelles at the molecular level and the array feature of the surface micelles through 2D projections of the surface patterns.

Intensive study on structure transformation of muscovite single crystal under high-dose γ-ray irradiation and mechanism speculation

Intensive study on structure transformation of muscovite single crystal under high-dose γ-ray irradiation is essential for its use in irradiation detection and also beneficial for mechanism cognition on defect formation within a matrix of clay used in the disposal of high-level radioactive waste (HLRW). In this work, muscovite single crystal was irradiated with Co-60 γ ray in air at a dose rate of 54 Gy min-1 with doses of 0-1000 kGy. Then, structure transformation and mechanism were explored by Raman spectrum, Fourier-transform infrared spectrum, X-ray diffraction, thermogravimetric analysis, CA, scanning electron microscope and atomic force microscopy. The main results show that variations in the chemical/crystalline structure are dose-dependent. Low-dose irradiation sufficiently destroyed the structure, removing Si-OH, thus declining hydrophilicity. With dose increase up to 100 kGy, CA increased from 20° to 40°. Except for hydrophilicity variation, shrink occurred in the (004) lattice plane which later recovered; the variation range at 500 kGy irradiation was 0.5% close to 0.02 Å. The main mechanisms involved were framework break and H2O radiolysis. Framework break results in Si-OH removal and H2O radiolysis results in extra OH introduction. The extra introduced OH probably results in Si-OH bond regeneration, lattice plane shrink and recovered surface hydrophilicity. The importance of framework break and H2O radiolysis on structure transformation is dose-dependence. At low doses, framework break seems more important while at high doses H2O radiolysis is important. Generally, variations in the chemical structure and surface property are nonlinear and less at high doses. This indicates using the chemical structure or surface property variation to describe irradiation is correct at low doses but not at high doses. This finding is meaningful for realizing whether muscovite is suitable for detecting high-dose irradiation or not, and mechanism exploration is efficient for identifying the procedure for defect formation within the matrix of clay used in disposal HLRW in practice.

Surface Reconstruction by a Coassembly Approach

Materials with switchable surfaces, capable of changing surface properties under external stimuli, are playing a pivotal role in many applications, such as tissue engineering, biosensors, and drug/protein delivery. In this research silica particles with patterned and switchable surfaces are fabricated. Surface micelles on silica particles are formed by coassembly of polymer brushes and "free" block copolymer chains in a selective solvent. The cores of the surface micelles are crosslinked by anthracene photodimerization. After quaternization of the coronae, amphiphilic surface micelles are prepared. The surface micelles are able to rearrange in different media. After treatment with an organic solvent, the surfaces of silica particles are occupied by hydrophobic polymer components; in aqueous solution, the positively charged polymer chains are on the surfaces. The switching of the surface micelles results in changes in surface composition and wetting behaviors.

Intensive evaluation of radiation stability of phlogopite single crystals under high doses of γ-ray irradiation

The evaluation of radiation stability of clay is important for the disposal of high-level radioactive waste (HLRW). In this study, phlogopite single crystals were irradiated by Co-60 γ-rays in air at a dose rate of 3.254 kGy h⁻¹ with doses up to 1000 kGy. Subsequently, the radiation stability and mechanism of radiation damage were explored by RS, FT-ATR, XRD, TGA, CA, and SEM techniques. In general, phlogopite single crystals show worthwhile radiation resistance toward their chemical structure but poor radiation stability toward their crystalline structure. Upon irradiation, their chemical structure changed slightly, while their crystalline structure varied obviously. For the 1000 kGy-irradiated sample, the interlayer space d of the (001) lattice plane increased by more than 1% with a value close to 0.13 Å, showing expansion. This could be mainly ascribed to H₂O radiolysis and framework breakage: the former seems more important. These variations had a considerable impact on surface hydrophilicity, while they had marginal impacts on thermal stability and morphology: the effect on surface hydrophilicity is dose-dependent. A lower dose of irradiation sufficiently reduced the hydrophilicity, while a higher dose recovered the hydrophilicity. For instance, the CA increased from 14° to 28° with dose increases from 0 kGy to 200 kGy and then decreased to approximately 20° as the dose continued to increase to 1000 kGy. In general, the crystalline structure is more sensitive toward γ-ray irradiation and phlogopites could be regarded as poorly radiation-resistant. In this procedure, H₂O radiolysis occupies a crucial role and seems to be the dominant factor. This finding is meaningful to evaluate the radiation stability of clay matrixes and to understand the microscopic property variations in clays used in practice when they are under irradiation.

Upon irradiation, the framework underwent breakage, H₂O underwent radiolysis, and the radiolysis products reacted with the framework, expanding the lattice plane.