Self-Seeding of Block Copolymers with a π-Conjugated Oligo(p-phenylenevinylene) Segment: A Versatile Route toward Monodisperse Fiber-like Nanostructures

Preparation and cellular uptake behaviors of uniform fiber-like micelles with length controllability and high colloidal stability in aqueous media

Fragmentation/disassembly of fiber-like micelles generated by living crystalline-driven self-assembly (CDSA) is usually encountered in aqueous media, which hinders the applications of micelles. Herein, we report the generation of uniform fiber-like micelles consisting of a π-conjugated oligo(p-phenylenevinylene) core and a cross-linking silica shell with grafted poly(ethylene glycol) (PEG) chains by the combination of living CDSA, silica chemistry and surface grafting-onto strategy. Owing to the presence of crosslinking silica shell and the outmost PEG chains, the resulting micelles exhibit excellent dispersity and colloidal stability in PBS buffer, BSA aqueous solution and upon heating at 80 °C for 2 h without micellar fragmentation/disassembly. The micelles also show negligible cytotoxicity toward both HeLa cervical cancer and HEK239T human embryonic kidney cell lines. Interestingly, micelles with L n of 156 nm show the "stealth" property with no significant uptake by HeLa cells, whereas some certain amounts of micelles with L n of 535 nm can penetrate into HeLa cells, showing length-dependent cellular uptake behaviors. These results provide a route to prepare uniform, colloidally stable fiber-like nanostructures with tunable length and functions derived for biomedical applications.

Self-Assembly of Copolymers Containing Crystallizable Blocks: Strategies and Applications

The self-assembly of copolymers containing crystallizable block in solution has received increasing attentions in the past few years. Various strategies including crystallization-driven self-assembly (CDSA) and polymerization-induced CDSA (PI-CDSA) have been widely developed. Abundant self-assembly morphologies were captured and advanced applications have been attempted. In this review, the synthetic strategies including the mechanisms and characteristics are highlighted, the survey on the advanced applications of crystalline nano-assemblies are collected. This review is hoped to depict a comprehensive outline for self-assembly of copolymers containing crystallizable block in recent years and to prompt the development of the self-assembly technology in interdisciplinary field. This article is protected by copyright. All rights reserved.

Bottlebrush Polymers Based on RAFT and the "C1" Polymerization Method: Controlled Synthesis and Application in Anticancer Drug Delivery

In this work, we reported a strategy to synthesize well-defined bottlebrush polymers. Diazoacetate macromonomers of polystyrene (1-PS_n) with controlled molecular weights were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. The diazo can tolerate the RAFT polymerization conditions and remained on the chain end of the yielded PS macromonomer. The terminal diazo groups of the macromonomer were polymerized by the allyl PdCl/L catalyst to afford well-defined bottlebrush polymers ((1-PS_n)_ms) carrying a side chain on each backbone atom. Meanwhile, an amphiphilic bottlebrush polymer containing brush-shaped PS and polyethylene glycol (PEG) was synthesized by polymerization of the diazoacetate macromonomer of PEG (2-PEG) using Pd(II)-terminated (1-PS_n)_m as the macroinitiator. The yielded amphiphilic (1-PS₃₀)₅₀-b-(2-PEG)₁₀₀ could self assemble into a well-defined core-shell micelle in aqueous solutions. The hydrodynamic diameter of the micelle was ca. 146 nm and had good biocompatibility. These results indicate the micelles have great potential in drug delivery.

π-Conjugated-polymer-based nanofibers through living crystallization-driven self-assembly: preparation, properties and applications

π-Conjugated-polymer-based nanofibers (CPNFs) of controlled length, composition and morphology are promising for a broad range of emerging applications in optoelectronics, biomedicine and catalysis, owing to the morphological merits of fiber-like nanostructures and structural attributes of π-conjugated polymers. Living crystallization-driven self-assembly (CDSA) of π-conjugated-polymer-containing block copolymers (BCPs) has emerged as an efficient strategy to prepare CPNFs with precise dimensional and structural controllability by taking advantage of the crystallinity of π-conjugated polymers. In this review, recent advances in the generation of CPNFs have been highlighted. The influence of the structure of π-conjugated-polymer-containing BCPs and experimental conditions on the CDSA behaviors, especially seeded growth and self-seeding processes of living CDSA, has been discussed in detail, aiming to provide an in-depth overview of living CDSA of π-conjugated-polymer-containing BCPs. In addition, the properties of CPNFs as well as their potential applications have been illustrated. Finally, we put forward the current challenges and research directions in the field of CPNFs.

Low-Power and Tunable-Performance Biomemristor Based on Silk Fibroin

Biomemristors have attracted significant attention because of their potential applications in logic operations, nonvolatile memory, and synaptic emulators, thus leading to the urgent need to improve memristive performance. In this work, a silk fibroin (SF)-based memristor, integrated with both low power and low operating current simultaneously, has been reported. Doping the SF with Ag and an ethanol-based post-treatment promote microcrystal formation in the bulk of the SF. This induces carrier transport along fixed, short paths and results in a low set voltage, low operating current, and high memristive stability. Such performances can greatly reduce power consumption and heat generation, beneficial for the accuracy and durability of memristor devices. The memristive mechanism of SF-based memristors with different Ag contents is the space-charge-limited conduction (SCLC) mechanism. In addition, the nonlinear transmission property of SF-based memristors suggests useful applications in bioelectronics.

Direct formation of nano-objects via in situ self-assembly of conjugated polymers

The development of the polymer self-assembly method “in situ nanoparticlization of conjugated polymers” is discussed in this Perspective.

Preparation of Poly(MTZ) n -(DMAEMA) m Micelles and Study on Their Antibacterial Property

Bacterial infections are the most common type of clinical infection. The abuse of clinical antibiotics has led to the frequent appearance of drug-resistant strains and even some super bacteria. In this study, we synthesized Poly(MTZ) _n -(DMAEMA) _m polymer micelles with cations on the surface. The synthesis of this novel polymer comes in two steps. First, Poly(MTZ) _n was synthesized with metronidazole (MTZ) referred as the macromolecular chain transfer agent and v-501 as the initiator for initiating the polymerization of 4-cyanopentanoic acid dithiobenzoate. Then, novel polymer micelles were synthesized with Poly(MTZ) _n referred as the macromolecular chain transfer agent and v-501 as the initiator for initiating the polymerization of the monomer 2-(dimethylamino) ethyl methacrylate, which could adsorb to the negatively charged bacterial surface via electrostatic interaction and enhance bactericidal activity. Scanning electron microscopy showed that the micelles could be accurately targeted to the surface of bacteria, and the zone of inhibition assay confirmed that the micelles could enhance the sensitivity of bacteria to drugs. Hence, Poly(MTZ) _n -(DMAEMA) _m polymer micelles will have potential use for the clinical treatment of anaerobic infections in the future.

Rapid formation and real-time observation of micron-sized conjugated nanofibers with tunable lengths and widths in 20 minutes by living crystallization-driven self-assembly

Preparing well-defined semiconducting nanostructures from conjugated polymers is of paramount interest for organic optoelectronic devices. Several studies have demonstrated excellent structural and size control from block copolymers (BCPs) containing non-conjugated blocks via crystallization-driven self-assembly (CDSA); however, the precise control of their size and shape remains a challenge due to their poor solubility, causing rapid and uncontrolled aggregation. This study presents a new type of fully conjugated BCP comprising two polyacetylene derivatives termed poly(cyclopentenylene-vinylene) to prepare semiconducting 1D nanofibers. Interestingly, the widths of nanofibers were tuned from 12 to 32 nm based on the contour lengths of their crystalline core blocks. Their lengths could also be controlled from 48 nm to 4.7 μm using the living CDSA. Monitoring of the growth kinetics of the living CDSA revealed the formation of micron-sized 1D nanofibers in less than 20 min. The rapid CDSA enabled us to watch real-time growth using confocal fluorescence microscopy.

New fully conjugated block copolymers formed semiconducting 1D nanofibers with excellent structural and size control. The rapid living CDSA enabled us to watch the real-time video of the whole self-assembly process.

Smart azobenzene-containing tubular polymersomes: fabrication and multiple morphological tuning

A fundamental challenge in nanomaterial science is to facilely fabricate nonspherical polymersomes. Here, several kinds of novel tubular polymersomes were fabricated via self-assembly of amphiphilic azobenzene-containing block copolymers. Besides, their shape could be tuned by multiple approaches including changes in the chemical structure, self-assembly conditions and external stimuli.

Solvent effects leading to a variety of different 2D structures in the self-assembly of a crystalline-coil block copolymer with an amphiphilic corona-forming block

We describe a polyferrocenyldimethylsilane (PFS) block copolymer (BCP), PFS27-b-P(TDMA65-ran-OEGMA69) (the subscripts refer to the mean degrees of polymerization), in which the corona-forming block is a random brush copolymer of hydrophobic tetradecyl methacrylate (TDMA) and hydrophilic oligo(ethylene glycol) methyl ether methacrylate (OEGMA). Thus, the corona is amphiphilic. This BCP generates a remarkable series of different structures when subjected to crystallization-driven self-assembly (CDSA) in solvents of different polarity. Long ribbon-like micelles formed in isopropanol, and their lengths could be controlled using both self-seeding and seeded growth protocols. In hexanol, the BCP formed more complex structures. These objects consisted of oval platelets connected to long fiber-like micelles that were uniform in width but polydisperse in length. In octane, relatively uniform rectangular platelets formed. Finally, a distinct morphology formed in a mixture of octane/hexanol, namely uniform oval structures, whose height corresponded to the fully extended PFS block. Both long and short axes of these ovals increased with the initial annealing temperature and with the BCP concentration. The self-seeding protocol also afforded uniform two-dimensional structures. Seeded growth experiments, in which a solution of the BCP in THF was added to a colloidal solution of the oval micelles led to a linear increase in area while maintaining the aspect ratio of the ovals. These experiments demonstrate the powerful effect of the amphiphilic corona chains on the CDSA of a core crystalline BCP in solvents of different hydrophilicity.

Why Do Elastin-Like Polypeptides Possibly Have Different Solvation Behaviors in Water-Ethanol and Water-Urea Mixtures?

The solvent quality determines the collapsed or the expanded state of a polymer. For example, a polymer dissolved in a poor solvent collapses, whereas in a good solvent it opens up. While this standard understanding is generally valid, there are examples when a polymer collapses even in a mixture of two good solvents. This phenomenon, commonly known as co-non-solvency, is usually associated with a wide range of synthetic (smart) polymers. Moreover, recent experiments have shown that some biopolymers, such as elastin-like polypeptides (ELPs) that exhibit lower critical solution behavior T l in pure water, show co-non-solvency behavior in aqueous ethanol mixtures. In this study, we investigate the phase behavior of elastin-like polypeptides (ELPs) in aqueous binary mixtures using molecular dynamics simulations of all-atom and complementary explicit solvent generic models. The model is parameterized by mapping the solvation free energy obtained from the all-atom simulations onto the generic interaction parameters. For this purpose, we derive segment-based (monomer level) generic parameters for four different peptides, namely proline (P), valine (V), glycine (G), and alanine (A), where the first three constitute the basic building blocks of ELPs. Here, we compare the conformational behavior of two ELP sequences, namely -(VPGGG)- and -(VPGVG)-, in aqueous ethanol and -urea mixtures. Consistent with recent experiments, we find that ELPs show co-non-solvency in aqueous ethanol mixtures. Ethanol molecules have preferential binding with all ELP residues, with an interaction contrast of 6-8 k B T, and thus driving the coil-to-globule transition. On the contrary, ELP conformations show a weak variation in aqueous urea mixtures. Our simulations suggest that the glycine residues dictate the overall behavior of ELPs in aqueous urea, where urea molecules have a rather weak preferential binding with glycine as observed from the all atom simulations, i.e., less than k B T. This weak interaction dilutes the overall effect of other neighboring residues and thus ELPs exhibit a different conformational behavior in aqueous urea in comparison to aqueous ethanol mixtures. While the validation of the latter findings will require a more detailed experimental investigation, the results presented here may provide a new twist to the present understanding of cosolvent interactions with peptides and proteins.

Chiral gold-PPA nanocomposites with tunable helical sense and morphology

A novel type of stimuli-responsive dynamic helical polymer-metal nanoparticle nanocomposite formed by a helical poly(phenylacetylene) (PPA) combined with gold nanoparticles (AuNPs) is described. Thus, several PPA copolymers containing the ethynyl-4-benzamide of (S)-phenylglycine methyl ester (M1) to dictate the helical structure/sense of the copolymer, and the ethynyl-4-benzamide of the 11-((2-(2-(2-aminoethoxy)ethoxy)ethyl)amino)undecane-1-thiol (M2) to link the copolymer to the AuNPs are prepared. Different morphologies of these nanocomposites were obtained by considering the thiol ratio and the self-assembly properties of the PPA, which generates from dispersed AuNPs to fibre-like structures. All these nanocomposites show a dynamic chiral behaviour, it being possible to manipulate their helical sense by the action of external stimuli. Moreover, it is possible to control the aggregation of these nanocomposites into macroscopically chiral nanospheres with low polydispersity by using Ba2+ as a crosslinking agent.

Continuous and Segmented Semiconducting Fiber-like Nanostructures with Spatially Selective Functionalization by Living Crystallization-Driven Self-Assembly

Fiber-like π-conjugated nanostructures are important components of flexible organic electronic and optoelectronic devices. To broaden the range of potential applications, one needs to control not only the length of these nanostructures, but the introduction of diverse functionality with spatially selective control. Here we report the synthesis of a crystalline-coil block copolymer of oligo(p-phenylenevinylene)-b-poly(2-vinylpyridine) (OPV₅ -b-P2VP₄₄ ), in which the basicity and coordinating/chelating ability of the P2VP segment provide a landscape for the incorporation of a variety of functional inorganic NPs. Through a self-seeding strategy, we were able to prepare monodisperse fiber-like micelles of OPV₅ -b-P2VP₄₄ with lengths ranging from 50 to 800 nm. Significantly, the exposed two ends of OPV core of these fiber-like micelles remained active toward further epitaxial deposition of OPV₅ -b-PNIPAM₄₉ and OPV₅ -b-P2VP₄₄ to generate uniform A-B-A and B-A-B-A-B segmented block comicelles with tunable lengths for each block. The P2VP domains in these (co-)micelles can be selectively decorated with inorganic and polymeric nanoparticles as well as metal oxide coatings, to afford hybrid fiber-like nanostructures. This work provides a versatile strategy toward the fabrication of narrow length dispersity continuous and segmented π-conjugated OPV-containing fiber-like micelles with the capacity to be decorated in a spatially selective way with varying functionalities.

Inky flower-like supermicelles assembled from π-conjugated block copolymers

Conjugated block copolymers PPV₇-b-P2VP_n are utilized as building blocks to construct inky flower-like hierarchical supermicelles. The assembly process is tracked and the control of morphology is successfully realized.

Uncontrolled polymerization that occurred during photoinitiated RAFT dispersion polymerization of acrylic monomers promotes the formation of uniform raspberry-like polymer particles

Uniform raspberry-like polymer particles are prepared by a different type of photoinitiated RAFT dispersion polymerization.

Ultralow Self-Cross-Linked Poly(N-isopropylacrylamide) Microgels Prepared by Solvent Exchange

We found that the poly(N-isopropylacrylamide) (PNIPAm) synthesized by free-radical polymerization in organic phase could also form stable microgels in water through solvent exchange without chemical cross-linkers. Dynamic light scattering and transmission electron microscopy showed the larger swelling ratio and higher deformability of these microgels. Nuclear magnetic resonance and infrared spectroscopy indicated that the self-cross-linking structures in these microgels were attributed to the hydrogen atom abstraction both from the isopropyl tert-carbon atoms and the vinyl tert-carbon atoms in PNIPAm chains and the organic solvents were important assistants in the hydrogen abstraction behavior. Our discovery revealed that the self-cross-linking of PNIPAm chains is a common phenomenon within their free-radical polymerization process, whether in aqueous phase or in organic phase. Besides, the addition of second monomers will not affect the cross-linkage of the PNIPAm portion, which may be of great significance for the synthesis of various functional ultralow cross-linking PNIPAm microgels.

Self-Assembled Helical and Twisted Nanostructures of a Preferred Handedness from Achiral π-Conjugated Oligo( p-phenylenevinylene) Derivatives

The formation of chiral nanostructures from the self-assembly of achiral building blocks without external symmetry breaking inducing factors is believed to associate with the origin of chirality. Herein, we reported the synthesis and self-assembly of oligo( p-phenylenevinylene)- b-poly(ethylene glycol) (OPV₃- b-PEG₁₇, the subscripts represent the number of repeat unit of each block) in solution. We systematically examined the influence of solvent, heating temperature, and concentration of OPV₃- b-PEG₁₇ on the self-assembly of OPV₃- b-PEG₁₇ by UV/vis absorption and fluorescence spectrometry, circular dichroism technique, and transmission electron and atomic force microscopy. Interestingly, helical and twisted nanoribbons and nanotubes of a preferred handedness can be formed from achiral OPV₃- b-PEG₁₇ in the mixture of water/ethanol (v/v = 1/1) and the solution showed an obvious exciton-coupled bisignated signal, which indicated that symmetry breaking occurred during the formation of these nanostructures without external inducing factors. Our results showed that the occurrence of symmetry breaking is subtle to the experimental factors including solvent, heating temperature, and concentration of OPV₃- b-PEG₁₇. The directional π-π stacking along with steric repulsion between PEG domains should be the driving force for the formation of these chiral nanostructures. The occurrence of statistical fluctuations in the initial stage of self-assembly led to an accidental excess of helical or/and twisted structures, that is, symmetry breaking. Subsequently, the autocatalysis effect resulted in the formation of helical or/and twisted nanoribbons with a preferred handedness.

Synergistic self-seeding in one-dimension: a route to patchy and block comicelles with uniform and controllable length

By manipulating both the dissolution sequence of polymer crystallites and the growth rate of polymer unimers, patchy comicelles and block comicelles with uniform and controllable length can be obtained.

Self-seeding is a process unique to polymer crystals, which consist of regions of different chain packing order and different crystallinity. Here we report the synergistic self-seeding behaviour of pairs of core-crystalline block copolymer (BCP) micelle fragments and show how this strategy can be employed to control the morphology of these BCP comicelles. Each micelle fragment has a critical dissolution temperature (T_c), and unimers of each BCP have a characteristic epitaxial growth rate. The T_c value affects the dissolution sequence of the fragments upon heating, while the unimer growth rate affects the growth sequence upon cooling. By carefully choosing micelle fragments having different T_c values as well as growth rates, we could prepare patchy comicelles and block comicelles with uniform and controllable length. This synergistic self-seeding strategy is a simple yet effective route to control both length and morphology of core-crystalline comicelles

Synthesis and self-seeding behavior of oligo(p-phenylene vinylene)-b-poly(N-(2-hydroxypropyl)methacrylamide)

This article reports the preparation of uniform fiber- and ribbon-like nanostructures via the self-seeding of OPV₅-b-PHPMA diblock copolymers.

Melamine-mediated supramolecular assembly of nucleobase-modified poly(l-lysine)

Melamine (M) was used to drive the supramolecular assembly of thymine (T)-modified poly(l-lysine) into fibers or spherical micelles through simply adjusting the substitution degree of T and the concentration of M.

Solution self-assembly of ABC triblock terpolymers with a central crystallizable poly(ferrocenyldimethylsilane) core-forming segment

The synthesis and solution self-assembly behavior of a range of linear ABC triblock terpolymers with a central crystallizable poly(ferrocenyldimethylsilane) core-forming segment have been explored.