Topology Affecting Block Copolymer Nanoassemblies: Linear Block Copolymers versus Star Block Copolymers under PISA Conditions

Aqueous RAFT Dispersion Polymerization Mediated by an ω,ω-Macromolecular Chain Transfer Monomer: An Efficient Approach for Amphiphilic Branched Block Copolymers and the Assemblies

Herein, an ω,ω-macromolecular chain transfer monomer (macro-CTM) containing a RAFT (reversible addition-fragmentation chain transfer) group and a methacryloyl group was synthesized and used to mediate photoinitiated RAFT dispersion polymerization of hydroxypropyl methacrylate (HPMA) in water. The macro-CTM undergoes a self-condensing vinyl polymerization (SCVP) mechanism under RAFT dispersion polymerization conditions, leading to the formation of amphiphilic branched block copolymers and the assemblies. Compared with RAFT solution polymerization, it was found that the SCVP process was promoted under RAFT dispersion polymerization conditions. Morphologies of branched block copolymer assemblies could be controlled by varying the monomer concentration and the [HPMA]/[macro-CTM] ratio. The branched block copolymer vesicles could be used as seeds for seeded RAFT emulsion polymerization, and framboidal vesicles were successfully obtained. Finally, degrees of branching of branched block copolymers could be further controlled by using a binary mixture of the macro-CTM and a linear macro-RAFT agent or a small molecule CTM. We believe that this study not only provides a versatile strategy for the preparation of branched block copolymer assemblies but also offers important insights into polymer synthesis via heterogeneous RAFT polymerization.

By Introducing Multiple Hydrogen Bonds Endows MOF Electrodes with an Enhanced Structural Stability

Recently, metal-organic frameworks (MOFs) have attracted great interest in energy storage areas. However, the poor structural stability of MOFs derived from weak coordination bonds limits their applications. Here, quadruple hydrogen bonds (H-bonds) were introduced onto the MOFs to enhance their structural stability. Cross-linked networks could be formed between molecules owing to multiple H-bonds, strengthening the framework stability. Moreover, the dynamic reversibility of H-bonds could endow MOFs with self-healing ability. Furthermore, due to lower binding energy compared to coordination bonds, H-bonds break preferentially when subjected to internal stress, thus protecting the MOFs. Consequently, the as-prepared self-healing hybrid (SHH-Cu-MOF@Ti3C2TX) exhibited high capacitance retention (89.4%) after 5000 cycles at 1 A g-1, while that hybrid without dynamic H-bonds (H-Cu-MOF@Ti3C2TX) presented a 79.9% retention, delivering an enhancement in cycling stability. Moreover, an asymmetric supercapacitor (ASC) was fabricated by employing SHH-Cu-MOF@Ti3C2TX and activated carbon (AC) as the electrodes. The ASC delivered a specific capacitance (47.4 F g-1 at 1 A g-1), an energy density (16.9 Wh kg-1), and a power density (800 W kg-1) as well as good rate ability (retains 81% of its initial capacitance from 0.2 A g-1 to 5 A g-1).

Efficient Synthesis of μ-A(BC)C Miktoarm Star Polymer Assemblies via Aqueous Photoinitiated Polymerization-Induced Self-Assembly

In this study, green light-activated photoiniferter reversible addition-fragmentation chain transfer (RAFT) polymerization of glycerol methacrylate was performed using an ω,ω-heterodifunctional macro-RAFT agent. Because of the different RAFT controllability of two RAFT groups toward methacrylic monomers, only one RAFT group was activated under green light irradiation, leading to the formation of a diblock copolymer macro-RAFT agent with one RAFT group located at the chain end and the other RAFT group located between two blocks. The obtained diblock copolymer macro-RAFT agent was then used to mediate aqueous photoinitiated RAFT dispersion polymerization of diacetone acrylamide (DAAM), which formed μ-A(BC)C miktoarm star polymer assemblies with a diverse set of morphologies. Comparing with the ABC triblock copolymer, it was found that the architecture of the μ-A(BC)C miktoarm star polymer facilitated the formation of higher-order morphologies. Kinetic studies indicated that the aqueous photoinitiated RAFT dispersion polymerization exhibited ultrafast polymerization behavior, with quantitative monomer conversion being achieved within 5 min. Size exclusion chromatography analysis confirmed that good RAFT control was maintained during the polymerization. A morphological phase diagram for μ-A(BC)C miktoarm star polymer assemblies was constructed by varying the monomer concentration and the [DAAM]/[Macro-RAFT] ratio. We expect that this study not only develops an approach for the preparation of miktoarm star polymer assemblies but also provides mechanistic insights into the polymerization-induced self-assembly of nonlinear polymers.

One-pot asymmetric living copolymerization-induced chiral self-assemblies and circularly polarized luminescence

Controlled synthesis of conjugated block polymers enables the optimization of their self-assembly and may lead to distinct optical properties and functionalities. Herein, we report a direct chain extension of one-handed helical poly(acyl methane) with 1-ethynyl-4-iodo-2,5-bis(octyloxy)benzene, affording well-defined π-conjugated poly(acyl methane)-b-poly(phenylene ethynylene) copolymers. Although the distinct monomers are polymerized via different mechanisms, the one-pot copolymerization follows a living polymerization manner, giving the desired optically active block copolymers with controllable molar mass and low distribution. The block copolymerization induced chiral self-assembly simultaneously due to the one-handed helicity of the poly(acyl methane) block, giving spherical nanoparticles, one-handed helices, and chiral micelles with controlled dimensions regarding the composition of the generated copolymers. Interestingly, the chiral assemblies exhibit clear circularly polarized luminescence with tunable handedness and a high dissymmetric factor.

Polymerisation-Induced Self-Assembly of Graft Copolymers

We report the polymerisation-induced self-assembly of poly(lauryl methacrylate)-graft-poly(benzyl methacrylate) copolymers during reversible addition-fragmentation chain transfer (RAFT) grafting from polymerisation in a backbone-selective solvent. Electron microscopy images suggest the phase separation of grafts to result in a network of spherical particles, due to the ability of the branched architecture to freeze chain entanglements and to bridge core domains. Small-angle X-ray scattering data suggest the architecture promotes the formation of multicore micelles, the core morphology of which transitions from spheres to worms, vesicles, and inverted micelles with increasing volume fraction of the grafts. A time-resolved SAXS study is presented to illustrate the formation of the inverted phase during a polymerisation. The grafted architecture gives access to unusual morphologies and provides exciting new handles for controlling the polymer structure and material properties.

The Effect of Topology on Block Copolymer Nanoparticles: Linear versus Star Block Copolymers in Toluene

Linear and star block copolymer (BCP) nanoparticles of (polystyrene-block-poly(4-vinylpyridine))_n (PS-b-P4VP)_n with arm numbers of 1, 2, 3, and 4 were prepared by two methods of polymerization-induced self-assembly (PISA) and general self-assembly of block copolymers in the low-polar organic solvent, toluene. The effect of the arm number on the size and/or morphology of the (PS-b-P4VP)_n nanoassemblies synthesized by the two methods in toluene and on the polymerization kinetics was investigated in detail. Our results show that in toluene, a low-polar solvent, the topology not only affected the morphology of the BCP nanoparticles prepared by PISA, but also influenced the BCP nanoparticles synthesized through general self-assembly.

RAFT-mediated polymerization-induced self-assembly (RAFT-PISA): current status and future directions

Polymerization-induced self-assembly (PISA) combines polymerization and self-assembly in a single step with distinct efficiency that has set it apart from the conventional solution self-assembly processes. PISA holds great promise for large-scale production, not only because of its efficient process for producing nano/micro-particles with high solid content, but also thanks to the facile control over the particle size and morphology. Since its invention, many research groups around the world have developed new and creative approaches to broaden the scope of PISA initiations, morphologies and applications, etc. The growing interest in PISA is certainly reflected in the increasing number of publications over the past few years, and in this review, we aim to summarize these recent advances in the emerging aspects of RAFT-mediated PISA. These include (1) non-thermal initiation processes, such as photo-, enzyme-, redox- and ultrasound-initiation; the achievements of (2) high-order structures, (3) hybrid materials and (4) stimuli-responsive nano-objects by design and adopting new monomers and new processes; (5) the efforts in the realization of upscale production by utilization of high throughput technologies, and finally the (6) applications of current PISA nano-objects in different fields and (7) its future directions.

Simultaneous Synthesis and Self-Assembly of Bottlebrush Block Copolymers at Room Temperature via Photoinitiated RAFT Dispersion Polymerization

Bottlebrush polymers exhibiting unique properties have attracted considerable attention for applications in many research areas. Herein, we report the first simultaneous synthesis and self-assembly of bottlebrush block copolymers at room temperature via photoinitiated polymerization-induced self-assembly (photo-PISA) using multifunctional macromolecular chain transfer agents (macro-CTAs). Compare with linear block copolymers, the bottlebrush block copolymers could promote the formation of higher-order morphologies (e.g. vesicles) when targeting similar degrees of polymerization (DPs). Moreover, a higher polymerization rate was observed in the case of bottlebrush block copolymers. Gel permeation chromatography (GPC) analysis showed that good polymerization control was maintained when synthesizing bottlebrush block copolymers by photo-PISA. Finally, the obtained bottlebrush block copolymer vesicles were used as seeds for further chain extension and multicomponent nanoparticles with a sponge internal structure were formed. We expect this study will not only expand polymer architectures employed in PISA, but also provides a new strategy to synthesize polymer nanoparticles with unique structures. This article is protected by copyright. All rights reserved.

Synthesis of Cross-Linked Block Copolymer Nano-Assemblies and their Coating Application

Since the discovery of polymerization-induced self-assembly (PISA), convenient synthesis of concentrated block copolymer nano-assemblies dispersed in solvent has been achieved. Now, application of block copolymer nano-assemblies should be paid more attention. In this study, corona-cross-linked block copolymer nanoparticles of poly[dimethylacrylamide-co-(diacetone acrylamide)]-b-polystyrene [P(DMA-co-DAAM)-b-PS] containing the poly(DAAM) segment in the hydrophilic P(DMA-co-DAAM) block are synthesized initially by PISA following dispersion RAFT polymerization and then by covalent intraparticle cross-linking through the poly(DAAM) segment and adipic acid dihydrazide (ADH). Coating application of the corona-cross-linked block copolymer nano-assemblies is tried, and much higher water resistance of the corona-cross-linked block copolymer nano-assemblies than that of the linear block copolymer nano-assemblies is demonstrated. This article is protected by copyright. All rights reserved.

In Situ Supramolecular Polymerization of Micellar Nanoobjects Induced by Polymerization

Supramolecular polymerization offers a fascinating opportunity to develop dynamic soft materials by associating monomeric building blocks via noncovalent interactions. We report that polymerization can spontaneously drive the supramolecular polymerization of nanoscale micellar objects. We constructed the patchy micelles via two-step polymerization-induced self-assembly. A horizontal association between the patches results in a 1D supermicellar chain in situ by minimizing the enthalpic penalty of exposing the growing chains to solvent. Its length grows with increasing degree of polymerization, confirming that the supramolecular polymerization was triggered and controlled by polymerization. Our results highlight the observation that (1) the entire self-assembly process of forming, compartmentalizing, and associating the micelles can be driven by polymerization in a concerted manner and that (2) polymerization-induced self-assembly now can use compartmentalized nanoobjects as substrates beyond block copolymer chains. Polymerization-induced supramolecular polymerization could be useful for the autonomous preparation of hierarchical nanostructures.

Exploration of the modification-induced self-assembly (MISA) technique and the preparation of nano-objects with a functional poly(acrylic acid) core

The hydrolysis-based post-polymerization modification method was introduced into the self-assembly process and a modification-induced self-assembly (MISA) technique was presented.

A3B-type miktoarm star polymer nanoassemblies prepared by reversible addition–fragmentation chain transfer (RAFT) dispersion polymerization

The investigation on a series of A3B-type miktoarm star polymer assemblies by RAFT PISA has revealed the role of A3B architecture in delaying morphological transitions, and the formation of larger vesicles as well as other interesting morphologies.

Pickering Emulsions Stabilized by Diblock Copolymer Worms Prepared via Reversible Addition-Fragmentation Chain Transfer Aqueous Dispersion Polymerization: How Does the Stimulus Sensitivity Affect the Rate of Demulsification?

Responsive Pickering emulsions exhibit promising application in industry owing to the integration of the high storage stability with on-demand demulsification. In this study, stimuli-responsive Pickering emulsions stabilized by poly[oligo(ethylene glycol) methyl ether methacrylate]₁₅-b-poly(diacetone acrylamide)₁₂₀ (E₁₅D₁₂₀) worms were indicated, in which E₁₅D₁₂₀ worms were prepared via reversible addition-fragmentation chain transfer-based aqueous dispersion polymerization using thermo-sensitive POEGMA₁₅ as both the stabilizer block and macro-chain transfer agent. The factors influencing the morphologies of copolymers during polymerization-induced self assembly have been investigated. A series of different morphological polymer nanoparticles including spheres, worms, and vesicles could be produced through rational synthesis. E₁₅D₁₂₀ worms demonstrated excellent emulsifying performances and could be used as emulsifiers to form n-dodecane-in-water Pickering emulsions at a low content. The formed n-dodecane-in-water Pickering emulsions revealed a slow demulsification at pH 10 or 70 °C or pH 10/70 °C combinations, and several hours were needed for the demulsification of Pickering emulsions. However, n-dodecane-in-water Pickering emulsions displayed a rapid demulsification (∼10 min) at an elevated temperature, such as 90 °C. The different demulsification rates were attributed to different sensitivities of E₁₅D₁₂₀ worms to external stimuli. Pickering emulsions integrating a rapid responsive demulsification with a slow one would be well satisfactory on different occasions.

Expanding the Scope of Polymerization-Induced Self-Assembly: Recent Advances and New Horizons

Over the past decade or so, polymerization-induced self-assembly (PISA) has become a versatile method for rational preparation of concentrated block copolymer nanoparticles with a diverse set of morphologies. Much of the PISA literature has focused on the preparation of well-defined linear block copolymers by using linear macromolecular chain transfer agents (macro-CTAs) with high chain transfer constants. In this review, a recent process is highlighted from an unusual angle that has expanded the scope of PISA including i) synthesis of block copolymers with nonlinear architectures (e.g., star block copolymer, branched block copolymer) by PISA, ii) in situ synthesis of blends of polymers by PISA, and iii) utilization of macro-CTAs with low chain transfer constants in PISA. By highlighting these important examples, new insights into the research of PISA and future impact these methods will have on polymer and colloid synthesis are provided.

Functionalization and metathesis polymerization induced self-assembly of an alternating copolymer into giant vesicles

A facile fabrication of spherical vesicles and micelles by acyclic diene metathesis (ADMET) polymerization and alternative metathesis polymerization (ALTMET) was investigated. We utilize fluorine (FL) and perylene diimide-based (PDI) α,ω-dienes and α,ω-diacrylates to provide a series of homopolymers and alternating copolymers. When using α,ω-dienes as model monomers, TEM measurement indicates that the aromatic FL and PDI building block induced polymers to generate medium-sized (30-50 nm and 90-120 nm, respectively) micelles and vesicles. It was amazing that alternating copolymers derived from PDI α,ω-dienes and FL α,ω-diacrylates spontaneously form giant vesicles with sizes in the range of 0.7 μm to 2.5 μm. The controlled self-assembly of the organic polymer mediated by ADMET and ALTMET techniques avoided extremely annoying post treatment. Therefore, this work establishes a new, versatile synthetic strategy to create nanoparticles having tunable morphologies with potential application as molecular payload delivery vehicles.

Hierarchical self-assembly of miktoarm star copolymers with pathway complexity

The self-assembly of amphiphilic miktoarm star copolymers shows hierarchical pathway complexity from molecular building blocks to miktoarm stars to micellar nano-objects to complex hierarchical assemblies.

Light-intensity switch enabled nonsynchronous growth of fluorinated raspberry-like nanoparticles

Raspberry-like (RB) nanoparticles hold potential for diverse applications due to their hierarchical morphology. Here we developed a novel tandem synthetic approach of nonsynchronous growth based on photo-mediated reversible-deactivation radical polymerization, enabling simple, efficient and bottom-up synthesis of RB nanoparticles of uniform sizes at quantitative conversions of fluorinated monomers. Chain transfer agents of different chain lengths, concentrations and chemical compositions were varied to tune the diameter of RB particles. Importantly, fluorinated RB nanoparticles obtained with this method allow facile post modifications via both covalent bond formation and intermolecular physical interactions without disrupting the RB morphology. The facile nature of this method and versatility of the obtained fluorinated RB materials open new opportunities for the development of functional materials using nanoparticles.

Thermoresponsive Block Copolymer Vesicles by Visible Light-Initiated Seeded Polymerization-Induced Self-Assembly for Temperature-Regulated Enzymatic Nanoreactors

Block copolymer vesicles loaded with active compounds have been employed as decent candidates to mimic complex biological systems that attract considerable interest in different research communities. We herein report a visible light-initiated seeded reversible addition-fragmentation chain transfer (RAFT)-mediated polymerization-induced self-assembly (PISA) for in situ preparation of enzyme-loaded cross-linked block copolymer vesicles without compromising the bioactivity. Permeability of the vesicular membrane can be regulated through changing the solution temperature, allowing further control over the enzymatic reaction rate of enzyme-loaded vesicles. Finally, non-cross-linked thermoresponsive block copolymer vesicles that can transform into worm-like micelles at low temperature are also prepared by this method, allowing the release of bimacromolecules from the vesicles under mild conditions.

CO2-Responsive Nano-Objects with Assembly-Related Aggregation-Induced Emission and Tunable Morphologies

CO₂-responsive polymeric nano-objects with assembly-related aggregation-induced emission (AIE) are obtained via polymerization-induced self-assembly (PISA) of 2-(dimethylamino)ethyl methacrylate (DMAEMA), 2-(4-formylphenoxy)ethyl methacrylate (MAEBA), and 4-(1,2,2-triphenylvinyl)phenyl methacrylate (TPEMA). These nano-objects exhibit, depending on the feed of MAEBA, a morphology evolution process from spherical micelles to vesicles. Due to the presence of DMAEMA units, CO₂ promotes morphology transformation of the nano-objects from spheres to a mixture of "jellyfish" and vesicles and vesicles to complex vesicles. Moreover, TPEMA endows the AIE feature to these nano-objects, offering a strategy to monitor the morphology evolution process in real time. Thus, this approach is significant for exploring the assembly mechanism of copolymer in polymerization-induced self-assembly and designing multistimuli-responsive polymeric nanomaterials with tunable morphologies and sizes.

Synthesis and direct assembly of linear–dendritic copolymers via CuAAC click polymerization-induced self-assembly (CPISA)

A one-pot method was developed for in situ preparation of linear–dendritic copolymer assemblies via click polymerization-induced self-assembly (CPISA).

Star amphiphilic block copolymers: synthesis via polymerization-induced self-assembly and crosslinking within nanoparticles, and solution and interfacial properties

The star amphiphilic block copolymer of star s-PNIPAM-b-PS is synthesized and it shows characteristics significantly different from those of the linear block copolymer counterpart.

Scalable preparation of alternating block copolymer particles with inverse bicontinuous mesophases

Block copolymer particles with controlled morphologies are of great significance in nanomaterials and nanotechnology. However, ordered inverse morphologies are difficult to achieve due to complex mechanism and formation conditions. Here we report scalable preparation of amphiphilic alternating block copolymer particles with inverse bicontinuous mesophases via polymerization-induced self-assembly (PISA). Concentrated dispersion copolymerizations (up to 40% solid content) of styrene (St) and pentafluorostyrene (PFS) employing a short poly(N,N-dimethylacrylamide) (PDMA29) stabilizer block lead to the formation of well-defined, highly asymmetric PDMA29-b-P(St-alt-PFS)x block copolymers with precise compositions and various morphologies, from simple spheres to ordered inverse cubosome mesophases. The particle morphology is affected by the molecular weight, solid content, and nature of the cosolvents. The cubosome structure is confirmed by electron microscopies and small angle X-ray scattering spectroscopy. This scalable PISA approach offers facile access to ordered inverse mesophases, significantly expanding the PISA morphology scope and enabling its applicability to the materials science fields.