Intrinsic High Refractive Index Siloxane–Sulfide Polymer Networks Having High Thermostability and Transmittance via Thiol–Ene Cross-Linking Reaction

A Facile One-Step Conversion of Biobased Magnolol (Honokiol) toward High Refractive Materials

A series of polymers with both high refractive index and high Abbe number have been successfully synthesized through the photoclick thiol-ene reaction between the monomers derived from biobased magnolol (or honokiol) and commercial mercaptans and thiophenols. The polymer films not only exhibit a high refractive index and a high Abbe number but also display a transmittance of up to 90% in a range of wavelengths from 550 to 2000 nm and nearly 0% in the UV region. Moreover, these polymers also display low haze values in the visible-light region as well as exhibit good thermostability. These data indicate that they have potential applications for the fabrication of optical lenses and anti-UV coatings. In particular, this series of polymers are readily used for industrialization due to its excellent optical properties but low expense, simplicity, and efficiency of synthesis.

High-Refractive-Index Cross-Linked Cyclic Olefin Polymers with Excellent Transparency via Thiol-Ene Click Reaction

High-refractive-index polymers are important optical materials in optoelectronics. Conventional cyclic olefin polymers (COPs), possessing many excellent optical properties, are a class of highly promising optical materials; however, one of the greatest obstacles is their low refractive index of n = 1.52-1.54. Here, one efficient strategy of first incorporating high molar refraction groups, including carbazolyl and indolyl moieties, into unsaturated COPs via ring-opening metathesis polymerization (ROMP) and then introducing another high molar refraction sulfur atom by a subsequent thiol-ene click reaction is presented. The obtained cross-linked COPs bearing both an aromatic group and sulfur possess significantly higher refractive indices (n = 1.611-1.684 at 589 nm) and highly optical transparency (approximately 95%) in the range of vis-NIR. This provides a way toward potential applications of new-generation optical materials.

Recent Progress in Sulfur-Containing High Refractive Index Polymers for Optical Applications

The development in the field of high refractive index materials is a crucial factor for the advancement of optical devices with advanced features such as image sensors, optical data storage, antireflective coatings, light-emitting diodes, and nanoimprinting. Sulfur plays an important role in high refractive index applications owing to its high molar refraction compared to carbon. Sulfur exists in multiple oxidation states and can exhibit various stable functional groups. Over the last few decades, sulfur-containing polymers have attracted much attention owing to their wide array of applications governed by the functional group of sulfur present in the polymer repeat unit. The interplay of refractive index and various other polymer properties contributes to successfully implementing a specific polymer material in optical applications. The focus on developing optoelectronic devices induced an ever-increasing need to integrate different functional materials to achieve the devices' full potential. Several devices that see the potential use of sulfur in high refractive index materials are reviewed in the study. Like sulfur, selenium also exhibits high molar refraction and unique chemical properties, making it an essential field of study. This review covers the research and development in the field of sulfur and selenium in different forms of functionality, focusing on the chemistry of bonding and the optical properties of the polymers containing the heteroatoms mentioned above. The strategy and rationale behind incorporating heteroatoms in a polymer matrix to produce high-refractive-index materials are also described in the present review.

UV-curable thiol-ene system for broadband infrared transparent objects

Conventional infrared transparent materials, including inorganic ceramic, glass, and sulfur-rich organic materials, are usually processed through thermal or mechanical progress. Here, we report a photo-curable liquid material based on a specially designed thiol-ene strategy, where the multithiols and divinyl oligomers were designed to contain only C, H, and S atoms. This approach ensures transparency in a wide range spectrum from visible light to mid-wave infrared (MWIR), and to long-wave infrared (LWIR). The refractive index, thermal properties, and mechanical properties of samples prepared by this thiol-ene resin were characterized. Objects transparent to LWIR and MWIR were fabricated by molding and two-photon 3D printing techniques. We demonstrated the potential of our material in a range of applications, including the fabrication of IR optics with high imaging resolution and the construction of micro-reactors for temperature monitoring. This UV-curable thiol-ene system provides a fast and convenient alternative for the fabrication of thin IR transparent objects.

Tris(pentafluorophenyl)borane-catalyzed Hydride Transfer Reactions in Polysiloxane Chemistry-Piers-Rubinsztajn Reaction and Related Processes

Tris(pentafluorophenyl)borane (TPFPB) is a unique Lewis acid that catalyzes the condensation between hydrosilanes (Si-H) and alkoxysilanes (Si-OR), leading to the formation of siloxane bonds (Si-OSi) with the release of hydrocarbon (R-H) as a byproduct-the so-called Piers-Rubinsztajn reaction. The analogous reactions of hydrosilanes with silanols (Si-OH), alcohols (R-OH), ethers (R-OR') or water in the presence of TPFPB leads to the formation of a siloxane bond, alkoxysilane (Si-OR or Si-OR') or silanol (Si-OH), respectively. The above processes, often referred to as Piers-Rubinsztajn reactions, provide new synthetic tools for the controlled synthesis of siloxane materials under mild conditions with high yields. The common feature of these reactions is the TPFPB-mediated hydride transfer from silicon to carbon or hydrogen. This review presents a summary of 20 years of research efforts related to this field, with a focus on new synthetic methodologies leading to numerous previously difficult to synthesize well-defined siloxane oligomers, polymers and copolymers of a complex structure and potential applications of these new materials. In addition, the mechanistic aspects of the recently discovered reactions involving hydride transfer from silicon to silicon are discussed in more detail.

All-organic polymeric materials with high refractive index and excellent transparency

High refractive index polymers (HRIPs) have drawn attention for their optoelectronic applications and HRIPs with excellent transparency and facile preparation are highly demanded. Herein, sulfur-containing all organic HRIPs with refractive indices up to 1.8433 at 589 nm and excellent optical transparency even in one hundred micrometre scale in the visual and RI region as well as high weight-average molecular weights (up to 44500) are prepared by our developed organobase catalyzed polymerization of bromoalkynes and dithiophenols in yields up to 92%. Notably, the fabricated optical transmission waveguides using the resultant HRIP with the highest refractive index display a reduced propagation loss compared with that generated by the commercial material of SU-8. In addition, the tetraphenylethylene containing polymer not only exhibits a reduced propagation loss, but also is used to examine the uniformity and continuity of optical waveguides with naked eyes because of its aggregation-induced emission feature.

The Use of the Thiol-Ene Addition Click Reaction in the Chemistry of Organosilicon Compounds: An Alternative or a Supplement to the Classical Hydrosilylation?

This review presents the main achievements in the use of the thiol-ene reaction in the chemistry of silicones. Works are considered, starting from monomers and ending with materials.The main advantages and disadvantages of this reaction are demonstrated using various examples. A critical analysis of the use of this reaction is made in comparison with the hydrosilylation reaction.

The ultimate Lewis acid catalyst: using tris(pentafluorophenyl) borane to create bespoke siloxane architectures

The breadth of utility of a commercially available and stable strong Lewis acid catalyst, tris(pentafluorophenyl)borane, has been explored, highlighting its use towards a wide range of unique siloxane products and their corresponding applications. This article focuses on the variety of different outcomes that this impressive borane offers in controlled and selective manners by the variation of reaction conditions, precursor functionalities, reagent or catalyst loading, and the mechanistic considerations that contribute. With a predominant focus on the Piers-Rubinsztajn reaction and its modifications, tris(pentaflurophenyl)borane's utility is highlighted in the synthesis of linear, cyclic and macrocyclic siloxanes, aryl-/alkoxysiloxanes, and other bespoke products. The significance of the catalytic transformation within the field of siloxane chemistry is discussed alongside some of the challenges that arise from using the borane catalyst.

High Refractive Index Diphenyl Sulfide Photopolymers for Solar Cell Antireflection Coatings

The anti-reflection film can effectively reduce the surface reflectivity of solar photovoltaics, increase the transmittance of light, and improve the photoelectric conversion efficiency. The high refractive index coating is an important part of the anti-reflection film. However, the traditional metal oxide coating has poor stability and complicated processes. To address this issue, we prepared two organic high refractive index (HRI) photopolymers by modifying epoxy acrylic acid with 4,4′-thiodibenzenethiol, which can be surface patterned by nanoimprinting to prepare antireflection coatings. As a result, two modified photopolymers with high refractive index (n > 1.63), high optical transmittance (T > 95%), and thermal stability (Tg > 100 °C) are obtained after curing. In particular, the diphenyl sulfide photopolymer modified by ethyl isocyanate acrylate has a refractive index up to 1.667 cured by UV light. Our work confirms that the organic HRI photopolymer can be obtained by introducing high molar refractive index groups, with potential to be applied as a PV cell power conversion efficiency material.

Foldable Bulk Anti-adhesive Polyacrylic Intraocular Lens Material Design and Fabrication for Posterior Capsule Opacification Prevention

Posterior capsular opacification (PCO) is a primary complication after phacoemulsification combined with intraocular lens (IOL) implantation, which is attributed to adhesion, proliferation, and migration of residual lens epithelial cells on IOL. Although surface hydrophilic coating is considered to be a powerful way to inhibit PCO incidence after surgery, it requires complex post-production processes, thus limiting their applicability. In comparison, bulk modification is a stable, effective, and facile IOL synthesis method for PCO prevention. Herein, a new anti-adhesive IOL material was designed and successfully synthesized by radical copolymerization of ethylene glycol phenyl ether methacrylate (EGPEMA) and 2-(2-ethoxyethoxy) ethyl acrylate (EA). The physicochemical properties of P(EGPEMA-co-EA) copolymer materials, including chemical structure, mechanical, thermal, surface, and optical properties, were analyzed by using ¹H NMR spectroscopy, FT-IR spectroscopy, tensile test, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), water contact angle measurement, and UV-vis spectroscopy. The elongation at break and the modulus of elasticity of the copolymer were tunable through the change of the composition of monomers. Compared to other components, the tensile results showed that P(EGPEMA-co-EA) materials (70% EGPEMA in mass ratio, F7) are suitable for the preparation of foldable intraocular lens with lower elastic modulus and higher elongation at break. TGA and DSC showed that the material has high thermal stability, and the glass transition temperature of F7 material is 16.1 °C. The water contact angle measurement results showed that the introduction of EA improved the hydrophilicity of the material. The percentage of transmittance of all copolymers at 400-800 nm is above 85%. Then, the biocompatibility of the materials was evaluated by in vitro assay and subcutaneous implantation. Both in vitro results and subcutaneous implantation experiments showed that the designed IOL materials exhibited a good anti-adhesion effect and no cytotoxicity. Finally, phacoemulsification and IOL intraocular implantation were performed, and the in vivo results confirmed the good PCO prevention ability as well as the biocompatibility of the new IOL materials.

Synthesis of Colorless and High-Refractive-Index Sulfoxide-Containing Polymers via the Oxidation of Poly(phenylene sulfide) Derivatives

Highly refractive, thermostable, and transparent poly(phenylene sulfide) (PPS) derivatives partially including S=O bonds were reported. The polymers were prepared via m-chloroperbenzoic acid (mCPBA) oxidation of the corresponding PPS derivatives, affording...

Use of Piers-Rubinsztajn Chemistry to Access Unique and Challenging Silicon Phthalocyanines

Axial functionalization is one mode that enables the solubility of silicon phthalocyanines (SiPcs). Our group observed that the use of typical axial functionalization methodologies on reaction of Cl₂SiPc with the chlorotriphenyl silane reagent unexpectedly resulted in the equal formation of triphenyl silyloxy silicon tetrabenzotriazacorrole ((3PS)-SiTbc) and the desired bis(tri-phenyl siloxy)-silicon phthalocyanine ((3PS)₂-SiPc). The formation of a (3PS)-SiTbc was unexpected, and the separation of (3PS)-SiTbc and (3PS)₂-SiPc was difficult. Therefore, in this study, we investigated the use of Piers-Rubinsztajn (PR) chemistry as an alternative method to functionalize the axial position of a SiPc to avoid the generation of a Tbc derivative. PR chemistry is a novel method to form a Si-O bond starting with a Si-H-based reactant and a -OH-based nucleophile enabled by tris(pentafluorophenyl)borane as a catalyst. The PR chemistry was screened on several fronts on how it can be applied to SiPcs. It was found that the process needs to be run in nitrobenzene at a molar ratio and at a particular temperature. To this end, the triphenylsiloxy derivative (3PS)₂-SiPc was produced and fully characterized, without the production of a Tbc derivative. In addition, we explored and outlined that the PR chemistry method can enable the formation of other SiPc derivatives that are inaccessible utilizing other established axial substitution chemistry methods such as (TM₃)₂-SiPc and (MDM)₂-SiPc. These additional materials were also physically characterized. The main conclusion is that the PR chemistry method can be applied to SiPcs and yield several alternative derivatives and has the potential to apply to additional macrocyclic compounds for unique derivative formation.

Photoclick Chemistry: A Bright Idea

At its basic conceptualization, photoclick chemistry embodies a collection of click reactions that are performed via the application of light. The emergence of this concept has had diverse impact over a broad range of chemical and biological research due to the spatiotemporal control, high selectivity, and excellent product yields afforded by the combination of light and click chemistry. While the reactions designated as "photoclick" have many important features in common, each has its own particular combination of advantages and shortcomings. A more extensive realization of the potential of this chemistry requires a broader understanding of the physical and chemical characteristics of the specific reactions. This review discusses the features of the most frequently employed photoclick reactions reported in the literature: photomediated azide-alkyne cycloadditions, other 1,3-dipolarcycloadditions, Diels-Alder and inverse electron demand Diels-Alder additions, radical alternating addition chain transfer additions, and nucleophilic additions. Applications of these reactions in a variety of chemical syntheses, materials chemistry, and biological contexts are surveyed, with particular attention paid to the respective strengths and limitations of each reaction and how that reaction benefits from its combination with light. Finally, challenges to broader employment of these reactions are discussed, along with strategies and opportunities to mitigate such obstacles.

High Refractive Index Photopolymers by Thiol-Yne "Click" Polymerization

A scalable synthesis of high refractive index, optically transparent photopolymers from a family of low-viscosity multifunctional thiol and alkyne monomers via thiol-yne "click" is described herein. The monomers designed to incorporate high refractive index cores consisting of aryl and sulfide groups with high intrinsic molar refraction were synthesized starting from commercially available low-cost raw materials. The low-viscosity (<500 cP) thiol-yne resins formulated with these new multifunctional monomers and a phosphine oxide photoinitiator underwent efficient thiol-yne polymerizations upon exposure to 405 nm light at 30 mW/cm². In contrast to the previously reported thiol-ene systems, the kinetic profile of these photopolymerizations showed significant dependence on the nature of the thiol and alkyne monomers. However, the ability of the thiol-yne reaction to introduce a large number of sulfide linkages compared to that of thiol-ene systems yielded cross-linked high optical quality photopolymers with a polymer refractive index that exceeds 1.68 (n_D/20 °C). Interestingly, the photopolymer formed from the least sterically hindered alkynyl thioether monomer 2b with flexible thioether core and the dithiol 1a exhibited unprecedented difference in the polymer refractive index as compared to that of the resin with polymerization-induced changes reaching up to 0.08. Furthermore, the implementation of these low-viscosity thiol-yne resins was demonstrated by preparing two-stage photopolymeric holographic materials with a dynamic range of ∼0.02 and haze < 1.5% in two-dimensional high refractive index structures.

An effective strategy for the preparation of intrinsic low-k and ultralow-loss dielectric polysiloxanes at high frequency by introducing trifluoromethyl groups into the polymers

Two new CF₃-containing polysiloxanes with low dielectric constant (D_k) and dielectric loss (D_f ) at a high frequency of 5 GHz were reported. The sample with two −CF₃ groups exhibits better dielectric properties with D_k of 2.53 and ultralow D_f of 1.66 × 10⁻³.