Chromium Amino-bis(phenolate) Complexes as Catalysts for Ring-Opening Polymerization of Cyclohexene Oxide

Air-Stable Cobalt(III) and Chromium(III) Complexes as Single-Component Catalysts for the Activation of Carbon Dioxide and Epoxides

Cobalt(III) and chromium(III) salophen chloride complexes were synthesized and tested for the cycloaddition of carbon dioxide (CO2) with epoxides to obtain cyclic carbonates. The cat1, cat2, cat4, and cat5 complexes presented high catalytic activity without cocatalysts and are solvent-free at 100 °C, 8 bar, and 9 h. At these conditions, the terminal epoxides (1a-1k) were successfully converted into the corresponding cyclic carbonates with a maximum conversion of ∼99%. Moreover, cat5 was highlighted due to its capability of opening internal epoxides such as limonene oxide (1l) with a 36% conversion to limonene carbonate (2l), and from cyclohexene oxide (1m), cyclic trans-cyclohexene carbonate (2m) and poly(cyclohexene carbonate) were obtained with 15% and 85% selectivity, respectively. A study of the coupling reaction mechanism was proposed with the aid of electrospray ionization mass spectrometry (ESI-MS) analysis, confirming the single-component behavior of the complexes through their ionization due to epoxide coordination. In addition, crystallographic analysis of cat1 single crystals grown in a saturated solution of pyridine helped to demonstrate that the substitution of chloride ion by pyridine ligands to form an octahedral coordination occurs (Py-cat1), supporting the proposed mechanism. Also, a recyclability study was performed for cat5, and a total turnover number of 952 was obtained with only minor losses in catalytic activity after five cycles.

Ring-Opening Polymerization of Cyclohexene Oxide and Cycloaddition with CO2 Catalyzed by Amine Triphenolate Iron(III) Complexes

A series of novel amine triphenolate iron complexes were synthesized and characterized using UV, IR, elemental analysis, and high-resolution mass spectrometry. These complexes were applied to the ring-opening polymerization (ROP) of cyclohexene oxide (CHO), demonstrating excellent activity (TOF > 11050 h-1) in the absence of a co-catalyst. In addition, complex C1 maintained the dimer in the presence of the reaction substrate CHO, catalyzing the ring-opening polymerization of CHO to PCHO through bimetallic synergy. Furthermore, a two-component system consisting of iron complexes and TBAB displayed the ability to catalyze the reaction of CHO with CO2, resulting in the formation of cis-cyclic carbonate with high selectivity. Complex C4 exhibited the highest catalytic activity, achieving 80% conversion of CHO at a CHO/C4/TBAB molar ratio of 2000/1/8 and a CO2 pressure of 3 MPa for 16 h at 100 °C, while maintaining >99% selectivity of cis-cyclic carbonates, which demonstrated good conversion and selectivity.

Real-time monitoring polymerization degree of organic photovoltaic materials toward no batch-to-batch variations in device performance

Polymerization degree plays a vital role in material properties. Previous methodologies of molecular weight control generally cannot suppress or alleviate batch-to-batch variations in device performance, especially in polymer solar cells. Herein, we develop an in-situ photoluminescence system in tandem with a set of analysis and processing procedures to track and estimate the polymerization degree of organic photovoltaic materials. To support the development of this protocol, we introduce polymer acceptor PYT constructed by near-infrared Y-series small molecule acceptors via Stille polymerization, and shed light on the correlations between molecular weight, spectral parameters, and device efficiencies that enable the design of the optical setup and confirm its feasibility. The universality is verified in PYT derivatives with stereoregularity and fluoro-substitution as well as benzo[1,2-b:4,5-b']dithiophene-based polymers. Overall, our result provides a tool to tailor suitable conjugated oligomers applied to polymer solar cells and other organic electronics for industrial scalability and desired cost reduction.

Synthesis of Mono- and Dinuclear Aluminum Complexes Bearing Aromatic Amino-Phenolato Ligands: A Comparative Study in the Ring-Opening Polymerization of Cyclohexene Oxide

Dinuclear aluminum methyl complexes bearing aromatic diamine-bridged tetra(phenolato) ligands and the mononuclear aluminum methyl complex with the phenylamine-bridged bis(phenolato) ligand have been synthesized and characterized. Structure determination revealed that the Al-Al distances in these dinuclear aluminum complexes are tunable by the choice of the suitable aromatic backbone of the diamine-bridged tetra(phenolato) ligands. The catalytic behaviors of these mono- and dinuclear aluminum complexes for cyclohexene oxide (CHO) polymerization were investigated. The activities of these dinuclear Al complexes were observed to increase with the decrease of Al-Al distances, and the dinuclear Al complexes appeared to have better catalytic activity than the mononuclear Al complex, even if the Al-Al distance is as long as 9.401 Å. Dinuclear aluminum complex 2, with the shortest Al-Al distance (7.236 Å), showed the highest activity toward CHO polymerization with TOFs up to 6460 h-1 in neat CHO at 30 °C. Furthermore, comparative kinetic studies revealed that the polymerization is first-order for CHO concentration, and the reaction orders for initiator concentration are different for the mono- and dinuclear Al complexes. The polymerization mechanism study revealed that both the methyl and phenolate groups were involved in the initiation process.

Controlled synthesis of polycarbonate diols and their polylactide block copolymers using amino-bis(phenolate) chromium hydroxide complexes

A diamine-bis(phenolate) chromium(III) complex, CrOH[L] ([L] = dimethylaminoethylamino-N,N-bis(2-methylene-4,6-tert-butylphenolate)), 2, in the presence of tetrabutylammonium hydroxide effectively copolymerizes CO2 and cyclohexene oxide (CHO) into a polycarbonate diol. The resultant low molar mass (6.3 kg mol-1) diol is used to initiate ring-opening polymerization of rac-lactide with 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) giving ABA-type block copolymers with good molar mass control through varying rac-LA-to-diol loadings and with narrow dispersities. As the degree of rac-LA incorporation increases, the glass transition temperatures (Tg) are found to decrease, whereas decomposition temperatures (Td) increase. (Diphenylphosphonimido)triphenylphosphorane (Ph2P(O)NPPh3) was used as a neutral nucleophilic cocatalyst with 2, giving phosphorus-containing polycarbonates with an Mn value of 28.5 kg mol-1, a dispersity of 1.13, a Tg value of 110 °C and a Td value of over 300 °C. A related Cr(III) complex (4) having a methoxyethyl pendent group rather than a dimethylaminoethyl group was structurally characterized as a hydroxide-bridged dimer.

Dinuclear Nickel Complexes Using Hexadentate Benzothiazole-Based Diamine-Bisphenolate Ligands: Highly Active Catalysts for Copolymerization of Carbon Dioxide with Epoxides

We reported for the first time the utilization of hexadentate benzothiazole-based diamine-bisphenolate ligands to synthesize structurally well-characterized dinickel dicarboxylate complexes and studied their catalysis for copolymerization of carbon dioxide with epoxides. Dinickel carboxylate complexes having a 1,3-diamine-bridged backbone were demonstrated to be high-performance catalysts for alternating copolymerization of CO₂ and cyclohexene oxide (CHO) with high product selectivity. Particularly, acetate-supported nickel complex 2 enabled us to promote such CO₂-copolymerization of this kind with a maximum turnover frequency of up to 2600 h^-1 and gave good molecular weight controllability under high-pressure conditions. It is worth noting that bimetallic Ni catalyst 2 was also capable of mediating the catalytic CO₂-polymerization of alicyclic epoxides at atmospheric pressure. Kinetic investigations of CO₂/CHO copolymerization by 2 allowed us to determine the rate equation of -d[CHO]/dt = k_p[2]¹[CHO]¹, and such catalysis exhibited a first-order dependence on both dinickel complex and CHO concentrations.

Synthesis of N-Methyl-o-phenylenediamine-Bridged Bis(phenolato) Lanthanide Alkoxides and Their Catalytic Performance for the (Co)Polymerization of rac-Butyrolactone and l-Lactide

A series of lanthanide alkoxo complexes supported by ONNO salalen ligands were synthesized and characterized. A one-pot reaction of LH₂ (L = (2-O-C₆H₂-^tBu₂-3,5)CH═N-C₆H₄-N(CH₃)CH₂(2-O-C₆H₂-^tBu₂-3,5)) with LnCp₃(THF) in a 1:1 molar ratio followed by the addition of 1 equiv of ROH (R = Bn, ⁱPr, and CF₃CH₂), afforded the dimeric lanthanide alkoxo complexes [LLn(μ-OCH₂Ph)]₂ [Ln = Lu (1), Yb (2), Sm (3), Nd (4)], [L²Yb(μ-OⁱPr)]₂ (5), and [L²Yb(μ-OCH₂CF₃)]₂ (6) in good isolated yields. All these lanthanide complexes were characterized by elemental analysis and FT-IR spectroscopy. In addition, complex 1 has been characterized by NMR spectroscopy. Single-crystal X-ray diffraction analysis of complexes 1, 2, 5, and 6 showed that these lanthanide alkoxo complexes are dimeric in the solid state. Complexes 1-6 showed good activity toward the homopolymerization of rac-butyrolactone (rac-BBL) to give atactic PHB, and ionic radii of central metals have profound influence on the polymerization. The polymerization behavior of l-lactide (l-LA) initiated by complex 2 was also explored. The kinetic study revealed that the polymerizations of rac-BBL and l-LA initiated by salalen lanthanide akoxide are first order for both the monomer and the initiator concentrations. Furthermore, it was found that complexes 1 and 2 showed good activity in the copolymerization of l-LA and rac-BBL, affording gradient copolymers.

Chromium Diamino-bis(phenolate) Complexes as Catalysts for the Ring-Opening Copolymerization of Cyclohexene Oxide and Carbon Dioxide

Chromium diamino-bis(phenolate) complexes, CrXL [where L = 6,6'-((1,4-diazepane-1,4-diyl)bis(methylene))bis(2,4-dimethylphenolato) and X = Cl^- (1), OH^- (2), and N₃^- (3)], were prepared and characterized by MALDI-TOF MS and single-crystal X-ray diffraction. Complex 1 crystallized as two linkage isomers, specifically a green chloride-bridged dimer (1) and a pink asymmetrically bridged isomer exhibiting one chloride bridging atom and one bridging phenolate oxygen (1'). Adventitious moisture during sample handling causes the formation of hydroxide-containing complex 2. The reaction of 1 with PPNN₃ (where PPN = bis(triphenylphosphine)iminium) permits the isolation of a crystalline chromium azide complex, 3, which was structurally authenticated. Complex 1 showed good activity toward the ring-opening copolymerization of cyclohexene oxide and carbon dioxide with an added chloride, azide, or 4-(dimethylamino)pyridine (DMAP) cocatalyst to give a completely alternating polycarbonate with a narrow molecular weight dispersity.

A Novel [OSSO]-Type Chromium(III) Complex as a Versatile Catalyst for Copolymerization of Carbon Dioxide with Epoxides

A new chromium(III) complex, bearing a bis-thioether-diphenolate [OSSO]-type ligand, was found to be an efficient catalyst in the copolymerization of CO₂ and epoxides to achieve poly(propylene carbonate), poly(cyclohexene carbonate), poly(hexene carbonate) and poly(styrene carbonate), as well as poly(propylene carbonate)(cyclohexene carbonate) and poly(propylene carbonate)(hexene carbonate) terpolymers.

Visualization of Atom Transfer Radical Polymerization by Aggregation-Induced Emission Technology

Aggregation-induced emission (AIE) technology has been demonstrated to be a facile approach for in-situ monitoring atom transfer radical polymerization (ATRP). A series of tertraphenyl ethylene (TPE)-containing α-bromo compounds were synthesized and applied as ATRP initiators. The photoluminescent (PL) emission of the polymerization system is proved to be sensitive to the local viscosity owing to the AIE characteristics of TPE. Linear relationships between the resulting molecular weight M_n and PL intensity were observed in several polymerization systems with different monomers, indicating the variability of this technique. Compared to physical blending, the chemical bonding of the TPE group in the chain end has higher sensitivity and accuracy to the polymer segments and the surrounding environment. This work promoted the combination of the AIE technique and controlled living radical polymerization, and introduced such an optical research platform to the ATRP polymerization process.

Ring-opening copolymerization of cyclic epoxide and anhydride using a five-coordinate chromium complex with a sterically demanding amino triphenolate ligand

This work describes polyester synthesis via alternating ring-opening copolymerization of epoxides and anhydrides using a trigonal bipyramidal chromium complex containing a sterically demanding ligand.