Rational Design Principles of Attenuated Cationic Lytic Peptides for Intracellular Delivery of Biomacromolecules

A small-molecule carrier for the intracellular delivery of a membrane-impermeable protein with retained bioactivity

Intracellular protein delivery has the potential to revolutionize cell-biological research and medicinal therapy, with broad applications in bioimaging, disease treatment, and genome editing. Herein, we demonstrate successful delivery of a functional protein, cytochrome c (CYC), by using a boron cluster anion as molecular carrier of the superchaotropic anion type (B12Br11OPr2-). CYC was delivered into lipid bilayer vesicles as well as living cells, with a cellular uptake ratio approaching 90%. Mechanistic studies showed that CYC was internalized into cells through a permeation pathway directly into the cytoplasm, bypassing endosomal entrapment. Upon carrier-assisted internalization, CYC retained its bioactivity, as reflected by an induced cell apoptosis rate of 25% at low dose (1 µM). This study furbishes a direct protein delivery method by a molecular carrier with high efficiency, confirming the potential of inorganic cluster ions as protein transport vehicles with an extensive range of future cell-biological or biomedical applications.

An approach for the intracellular delivery of IgG via enzymatic ligation with a cell-permeable attenuated cationic amphiphilic lytic peptide

Achieving effective intracellular delivery of therapeutic molecules such as antibodies (IgG) is a challenge in biomedical research and pharmaceutical development. Conjugation of IgG with a cell-penetrating peptide is a rational approach. Here, not only the efficacy of the conjugates in internalizing into cells, but also the physicochemical property of the conjugates allowing their solubilized states in solution without forming aggregates are critical. In this study, we have shown that the first requirement can be addressed using a cell-permeable attenuated cationic amphiphilic lytic (CP-ACAL) peptide, L17ER4. The second requirement can be addressed by ligation of IgG to L17ER4 using sortase A, where the use of a linker of appropriate chain length is also important. For evaluation, the intracellular delivery efficacy was studied using conjugate structures with different orientations and conjugation modes of L17ER4 in ligation to a model protein, green fluorescent protein fused to a nuclear localization signal (NLS-EGFP). The effect of tetraarginine positioning in the L17ER4 sequence was also investigated. Following these studies, an optimized peptide sequence containing L17ER4 was ligated to an anti-green fluorescent protein (GFP) IgG bearing a sortase A recognition sequence. Treatment of the cells with the conjugate of anti-GFP IgG and L17ER4 resulted in a high efficiency of cytosolic translocation of the conjugate and the binding to the target protein in the cell without significant aggregate formation. The feasibility of the d-form of L17ER4 as a CP-ACAL was also confirmed.

Finding ways into the cytosol: Peptide-mediated approaches for delivering proteins into cells

The delivery of functional proteins, including antibodies, into cells opens up many opportunities to regulate cellular events, with significant implications for studies in chemical biology and therapeutics. The inside of cells is isolated from the outside by the cell membrane. The hydrophilic nature of proteins prevents direct permeation of proteins through the cell membrane by passive diffusion. Therefore, delivery routes using endocytic uptake followed by endosomal escape have been explored. Alternatively, delivery concepts using transient permeabilization of cell membranes or effective promotion of endocytic uptake and endosomal escape using modified membrane-lytic peptides have been reported in recent years. Non-canonical protein delivery concepts, such as the use of liquid droplets or coacervates, have also been proposed. This review highlights some of the topics in peptide-mediated intracellular protein delivery.

E3MPH16: An efficient endosomolytic peptide for intracellular protein delivery

To facilitate the introduction of proteins, such as antibodies, into cells, a variety of delivery peptides have been engineered. These peptides are typically highly cationic and somewhat hydrophobic, enabling cytosolic protein delivery at the cost of causing cell damage by rupturing membranes. This balance between delivery effectiveness and cytotoxicity presents obstacles for their real-world use. To tackle this problem, we designed a new endosome-disruptive cytosolic delivery peptide, E3MPH16, inspired by mastoparan X (MP). E3MPH16 was engineered to incorporate three Glu (E3) and 16 His (H16) residues at the N- and C-termini of MP, respectively. The negative charges of E3 substantially mitigate the cell-surface damage induced by MP. The H16 segment is known to enhance cell-surface adsorption and endocytic uptake of the associated molecules. With these modifications, E3MPH16 was successfully trapped within endosomes. The acidification of endosomes is expected to protonate the side chains of E3 and H16, enabling E3MPH16 to rupture endosomal membranes. As a result, nearly 100% of cells achieved cytosolic delivery of a model biomacromolecule, Alexa Fluor 488-labeled dextran (10 kDa), via endosomal escape by co-incubation with E3MPH16. The delivery process also suggested the involvement of macropinocytosis and caveolae-mediated endocytosis. With the assistance of E3MPH16, Cre recombinase and anti-Ras-IgG delivered into HEK293 cells and HT1080 cells enabled gene recombination and inhibited cell proliferation, respectively. The potential for in vivo application of this intracellular delivery method was further validated by topically injecting the green fluorescent protein fused with a nuclear localization signal (NLS-GFP) along with E3MPH16 into Colon-26 tumor xenografts in mice.

Application of Peptides in Construction of Nonviral Vectors for Gene Delivery

Gene therapy, which aims to cure diseases by knocking out, editing, correcting or compensating abnormal genes, provides new strategies for the treatment of tumors, genetic diseases and other diseases that are closely related to human gene abnormalities. In order to deliver genes efficiently to abnormal sites in vivo to achieve therapeutic effects, a variety of gene vectors have been designed. Among them, peptide-based vectors show superior advantages because of their ease of design, perfect biocompatibility and safety. Rationally designed peptides can carry nucleic acids into cells to perform therapeutic effects by overcoming a series of biological barriers including cellular uptake, endosomal escape, nuclear entrance and so on. Moreover, peptides can also be incorporated into other delivery systems as functional segments. In this review, we referred to the biological barriers for gene delivery in vivo and discussed several kinds of peptide-based nonviral gene vectors developed for overcoming these barriers. These vectors can deliver different types of genetic materials into targeted cells/tissues individually or in combination by having specific structure-function relationships. Based on the general review of peptide-based gene delivery systems, the current challenges and future perspectives in development of peptidic nonviral vectors for clinical applications were also put forward, with the aim of providing guidance towards the rational design and development of such systems.

L17ER4: A cell-permeable attenuated cationic amphiphilic lytic peptide

We have developed a series of attenuated cationic amphiphilic lytic (ACAL) peptides that can efficiently bring immunoglobulin G (IgG) and other functional proteins into cells. Delivery is generally achieved through the coadministration of ACAL peptides with cargo proteins. However, conjugation of ACAL peptides with cargos may be a promising approach for in vivo application to link in vivo outcomes of ACAL peptides and cargos. This study describes the creation of a new cell-permeable ACAL peptide, L17ER4. L17E is an optimized prototype of ACAL peptides previously developed in our laboratory for efficient delivery of IgGs into cells. Delivery was improved by functionalizing L17E with a tetra-arginine (R4) tag. Compared to the use of R8, a representative cell-penetrating peptide with high intracellular delivery efficacy, conjugation with L17ER4 afforded approximately four-fold higher cellular uptake of model small-molecule cargos (fluorescein isothiocyanate and HiBiT peptide). L17ER4 was also able to deliver proteins to cells. Fused with L17ER4, Cre recombinase was delivered into cells. Intracerebroventricular injection of Cre-L17ER4 into green red reporter mice, R26GRR, led to significant in vivo gene recombination in ependymal cells, suggesting that L17ER4 may be used as a cell-penetrating peptide for delivering protein therapeutics into cells in vivo.

Glycan shields for penetrating peptides

We here describe the synthesis and biological evaluation of glycan shields for cell penetrating peptides. A new benzyl alkoxyamine connector was employed for the coupling of two saccharides units in the lateral side chain of individual amino acids in a peptide sequence. The oxyme bond formation with the corresponding glycan aldehydes allowed the preparation of highly glycosylated penetrating peptides with a minimal synthetic effort. Surprisingly, it was found that a four to six saccharide substitution did not decrease uptake efficiency in cells, whereas it significantly improved the toxicity profile of the penetrating peptide. In particular, glucose substitution was confirmed as an optimal glycan shield that showed an excellent in vitro uptake and intracellular localization as well as a superior in vivo biodistribution.

Functional Peptides That Target Biomembranes: Design and Modes of Action

Biomembranes are important targets in molecular design. Our laboratory has been exploring the design of functional peptides that modulate membrane barrier function, lipid packing, and structure. Evaluation of the results obtained and analyses of cellular mechanisms have yielded peptides with more refined designs and functions. This review highlights the progress made in our laboratory towards the development of unique peptides that modulate membrane properties.

Liquid Droplet Formation and Facile Cytosolic Translocation of IgG in the Presence of Attenuated Cationic Amphiphilic Lytic Peptides

Fc region binding peptide conjugated with attenuated cationic amphiphilic lytic peptide L17E trimer [FcB(L17E)₃ ] was designed for immunoglobulin G (IgG) delivery into cells. Particle-like liquid droplets were generated by mixing Alexa Fluor 488 labeled IgG (Alexa488-IgG) with FcB(L17E)₃ . Droplet contact with the cellular membrane led to spontaneous influx and distribution of Alexa488-IgG throughout cells in serum containing medium. Involvement of cellular machinery accompanied by actin polymerization and membrane ruffling was suggested for the translocation. Alexa488-IgG negative charges were crucial in liquid droplet formation with positively charged FcB(L17E)₃ . Binding of IgG to FcB(L17E)₃ may not be necessary. Successful intracellular delivery of Alexa Fluor 594-labeled anti-nuclear pore complex antibody and anti-mCherry-nanobody tagged with supernegatively charged green fluorescence protein allowed binding to cellular targets in the presence of FcB(L17E)₃ .

Non-viral nanoparticles for RNA interference: Principles of design and practical guidelines

Ribonucleic acid interference (RNAi) is an innovative treatment strategy for a myriad of indications. Non-viral synthetic nanoparticles (NPs) have drawn extensive attention as vectors for RNAi due to their potential advantages, including improved safety, high delivery efficiency and economic feasibility. However, the complex natural process of RNAi and the susceptible nature of oligonucleotides render the NPs subject to particular design principles and requirements for practical fabrication. Here, we summarize the requirements and obstacles for fabricating non-viral nano-vectors for efficient RNAi. To address the delivery challenges, we discuss practical guidelines for materials selection and NP synthesis in order to maximize RNA encapsulation efficiency and protection against degradation, and to facilitate the cytosolic release of oligonucleotides. The current status of clinical translation of RNAi-based therapies and further perspectives for reducing the potential side effects are also reviewed.

Potentiating the Membrane Interaction of an Attenuated Cationic Amphiphilic Lytic Peptide for Intracellular Protein Delivery by Anchoring with Pyrene Moiety

We previously reported an approach for intracellular protein delivery by attenuating membrane-lytic activity of cationic amphiphilic peptides on cell surfaces. HAad is one such peptides that cytosolically delivers proteins of interest, including antibodies, by stimulating their endosomal escape. Additionally, HAad elicits ruffling of cell membrane, accompanied by transient membrane permeabilization, allowing for the efficient cytosolic translocation of proteins. In this study, we prepared a conjugate of HAad with pyrenebutyric acid as a membrane-anchoring unit (pBu-HAad). pBu-HAad demonstrated protein delivery into cells with only 1/20 concentration of HAad. However, the conjugates with cholesteryl hemisuccinate and aliphatic fatty acids (C = 3, 6, and 10) did not yield such marked effects. The results of time-course and inhibitor studies suggest that the membrane anchoring of HAad by a pyrene moiety leads to enhanced peptide-membrane interaction and to loosen lipid packing, thus facilitating cytosolic translocation through membranes.

Use of homoarginine to obtain attenuated cationic membrane lytic peptides

Our research group has been studying the design of intracellular delivery peptides based on cationic lytic peptides. By placing negatively charged amino acids on potentially hydrophobic faces of the peptides, membrane lytic activity is attenuated on the cell surface, whereas it recovers in endosomes, enabling cytosolic delivery of proteins including antibodies. These lytic peptides generally contain multiple lysines, facilitating cell surface interaction and membrane perturbation. This study evaluated the effect of lysine-to-homoarginine substitution using HAad as a model delivery peptide. The resulting peptide had a comparable or better delivery efficacy for Cre recombinase, antibodies, and the Cas9/sgRNA complex with one-quarter of the concentration of HAad, implying that a subtle structural difference can affect delivery activity.

Advances in peptide-mediated cytosolic delivery of proteins

The number of protein-based drugs is exponentially increasing. However, development of protein therapeutics against intracellular targets is hampered by the lack of efficient cytosolic delivery strategies. In recent years, the use of cell-penetrating peptides has been proposed as a strategy to promote protein internalization. In this article, we provide the reader with a succinct update on the strategies exploited to enable peptide-mediated cytosolic delivery of proteins. First, we analyse the various methods available for delivery. We then describe the most popular and the in vitro assays designed to assess the intracellular distribution of protein cargo.

Multivalent dextran hybrids for efficient cytosolic delivery of biomolecular cargoes

The development of novel biotherapeutics based on peptides and proteins is often limited to extracellular targets, because these molecules are not able to reach the cytosol. In recent years, several approaches were proposed to overcome this limitation. A plethora of cell-penetrating peptides (CPPs) was developed for cytoplasmic delivery of cell-impermeable cargo molecules. For many CPPs, multimerization or multicopy arrangement on a scaffold resulted in improved delivery but also higher cytotoxicity. Recently, we introduced dextran as multivalent, hydrophilic polysaccharide scaffold for multimerization of cell-targeting cargoes. Here, we investigated covalent conjugation of a CPP to dextran in multiple copies and assessed the ability of resulted molecular hybrid to enter the cytoplasm of mammalian cells without largely compromising cell viability. As a CPP, we used a novel, low-toxic cationic amphiphilic peptide L17E derived from M-lycotoxin. Here, we show that cell-penetrating properties of L17E are retained upon multivalent covalent linkage to dextran. Dextran-L17E efficiently mediated cytoplasmic translocation of an attached functional peptide and a peptide nucleic acid (PNA). Moreover, a synthetic route was established to mask the lysine side chains of L17E with a photolabile protecting group thus opening avenues for light-triggered activation of cellular uptake.

Harnessing SLE Autoantibodies for Intracellular Delivery of Biologic Therapeutics

Intracellular delivery of therapeutic antibodies is highly desirable but remains a challenge for biomedical research and the pharmaceutical industry. Approximately two-thirds of disease-associated targets are found inside the cell. Difficulty blocking these targets with available drugs creates a need for technology to deliver highly specific therapeutic antibodies intracellularly. Historically, antibodies have not been believed to traverse the cell membrane and neutralize intracellular targets. Emerging evidence has revealed that anti-DNA autoantibodies found in systemic lupus erythematosus (SLE) patients can penetrate inside the cell. Harnessing this technology has the potential to accelerate the development of drugs against intracellular targets. Here, we dissect the mechanisms of the intracellular localization of SLE antibodies and discuss how to apply these insights to engineer successful cell-penetrating antibody drugs.