Modified Release and Improved Stability of Unstable BCS II Drug by Using Cyclodextrin Complex as Carrier To Remotely Load Drug into Niosomes

Advances in Nanotechnology for Enhancing the Solubility and Bioavailability of Poorly Soluble Drugs

This manuscript offers a comprehensive overview of nanotechnology's impact on the solubility and bioavailability of poorly soluble drugs, with a focus on BCS Class II and IV drugs. We explore various nanoscale drug delivery systems (NDDSs), including lipid-based, polymer-based, nanoemulsions, nanogels, and inorganic carriers. These systems offer improved drug efficacy, targeting, and reduced side effects. Emphasizing the crucial role of nanoparticle size and surface modifications, the review discusses the advancements in NDDSs for enhanced therapeutic outcomes. Challenges such as production cost and safety are acknowledged, yet the potential of NDDSs in transforming drug delivery methods is highlighted. This contribution underscores the importance of nanotechnology in pharmaceutical engineering, suggesting it as a significant advancement for medical applications and patient care.

Physicochemical and Stability Evaluation of Topical Niosomal Encapsulating Fosinopril/γ-Cyclodextrin Complex for Ocular Delivery

This study aimed to develop a chemically stable niosomal eye drop containing fosinopril (FOS) for lowering intraocular pressure. The effects of cyclodextrin (CD), surfactant types and membrane stabilizer/charged inducers on physiochemical and chemical properties of niosome were evaluated. The pH value, average particle size, size distribution and zeta potentials were within the acceptable range. All niosomal formulations were shown to be slightly hypertonic with low viscosity. Span® 60/dicetyl phosphate niosomes in the presence and absence of γCD were selected as the optimum formulations according to their high %entrapment efficiency and negative zeta potential values as well as controlled release profile. According to ex vivo permeation study, the obtained lowest flux and apparent permeability coefficient values confirmed that FOS/γCD complex was encapsulated within the inner aqueous core of niosome and could be able to protect FOS from its hydrolytic degradation. The in vitro cytotoxicity revealed that niosome entrapped FOS or FOS/γCD formulations were moderate irritation to the eyes. Furthermore, FOS-loaded niosomal preparations exhibited good physical and chemical stabilities especially of those in the presence of γCD, for at least three months under the storage condition of 2–8 °C.

The Role of Hydrogen Bonding in Paracetamol-Solvent and Paracetamol-Hydrogel Matrix Interactions

The photophysical and photochemical properties of antipyretic drug - paracetamol (PAR) and its two analogs with different substituents (acetanilide (ACT) and N-ethylaniline (NEA)) in 14 solvents of different polarity were investigated by the use of steady-state spectroscopic technique and quantum-chemical calculations. As expected, the results show that the spectroscopic behavior of PAR, ACT, and NEA is highly dependent on the nature of the solute-solvent interactions (non-specific (dipole-dipole) and specific (hydrogen bonding)). To characterize these interactions, the multiparameter regression analysis proposed by Catalán was used. In order to obtain a deeper insight into the electronic and optical properties of the studied molecules, the difference of the dipole moments of a molecule in the ground and excited state were determined using the theory proposed by Lippert, Mataga, McRae, Bakhshiev, Bilot, and Kawski. Additionally, the influence of the solute polarizability on the determined dipole moments was discussed. The results of the solvatochromic studies were related to the observations of the release kinetics of PAR, ACT, and NEA from polyurethane hydrogels. The release kinetics was analyzed using the Korsmayer-Peppas and Hopfenberg models. Finally, the influence of the functional groups of the investigated compounds on the release time from the hydrogel matrix was analyzed.

In silico modeling of functionalized poly(methylvinyl ether/maleic acid) for controlled drug release in the ocular milieu

Controlling structurally defined properties of drug-bound macromolecules such as surface adhesion and interaction with endogenous proteins in the surrounding environment using prior data from computer-assisted simulation can be of great use in designing controlled release macromolecular therapeutic systems. In this paper, we describe experimental correlation of real-time properties of a polymer with pendant drug molecules, with predicted values obtained from studying in silico molecular interactions of this polymer with ocular surface proteins (mucin) for formulating an ophthalmic in situ gel. Mucoretention of the drug (norfloxacin) within the eye sac is closely associated with binding interactions occurring on the ocular surface, and covalent association of the drug with the mucoadhesive polymer, poly(methylvinyl ether/maleic acid), can largely reduce dosing frequency eliciting prolonged antibacterial action much required in treating conjunctival infections. The physicochemical properties and 3D conformation of the drug-polymer conjugate were predicted by computational studies. Molecular docking of the drug-polymer conjugate with ocular surface mucin (MUC-1) suggested that amino acid residues Arg1095, Asn1091, and Gln1070 of mucin are involved in hydrogen bonding with carboxyl residues in the polymer structure. The orientation of the drug-polymer conjugate in solution profoundly depends on the properties of the drug. The studies further reveal that molecular interactions of MUC-1 with the drug in the drug-polymer conjugate influence the binding orientation of the drug-polymer to mucin. Computationally predicted solvation energies revealed a significant difference in energy values between drug molecule alone (- 113.04 kcal/mol) and the drug-polymer (- 492.44 kcal/mol) suggesting higher aqueous solvation of the drug-polymer conjugate compared with less-soluble drug, and that interactions between polymer chains and ocular aqueous environment dictate the drug-polymer conjugate's free energy. Our results demonstrate the fabrication of a macromolecular therapeutic gel using drug-polymer with controlled release properties and mucoadhesion guided by information predicted from computational software. Notably, in silico studies reveal that even small variations in molecular composition, in this case, an antibacterial drug that contributes less than half of the entire molecular weight can considerably change the drug's presentation to the ocular environment. Graphical abstract Table of contents graphic.

Complex systems that incorporate cyclodextrins to get materials for some specific applications

Cyclodextrins (CDs) are a family of biodegradable cyclic hydrocarbons composed of α-(1,4) linked glucopyranose subunits, the more common containing 6, 7 or 8 glucose units are named α, β and γ-cyclodextrins respectively. Since the discovery of CDs, they have attracted interest among scientists and the first studies were about the properties of the native compounds and in particular their use as catalysts of organic reactions. Characteristics features of different types of cyclodextrins stimulated investigation in different areas of research, due to its non-toxic and non-inmunogenic properties and also to the development of an improved industrial production. In this way, many materials with important properties have been developed. This mini-review will focus on chemical systems that use cyclodextrins, whatever linked covalently or mediated by the non covalent interactions, to build complex systems developed mainly during the last five years.

Cerivastatin Nanoliposome as a Potential Disease Modifying Approach for the Treatment of Pulmonary Arterial Hypertension

In this study we investigated nanoliposome as an approach to tailoring the pharmacology of cerivastatin as a disease-modifying drug for pulmonary arterial hypertension (PAH). Cerivastatin encapsulated liposomes with an average diameter of 98 ± 27 nm were generated by a thin film and freeze-thaw process. The nanoliposomes demonstrated sustained drug-release kinetics in vitro and inhibited proliferation of pulmonary artery (PA) smooth muscle cells with significantly less cellular cytotoxicity as compared with free cerivastatin. When delivered by inhalation to a rat model of monocrotaline-induced PAH, cerivastatin significantly reduced PA pressure from 55.13 ± 9.82 to 35.56 ± 6.59 mm Hg (P < 0.001) and diminished PA wall thickening. Echocardiography showed that cerivastatin significantly reduced right ventricle thickening (monocrotaline: 0.34 ± 0.02 cm vs. cerivastatin: 0.26 ± 0.02 cm; P < 0.001) and increased PA acceleration time (monocrotaline: 13.98 ± 1.14 milliseconds vs. cerivastatin: 21.07 ± 2.80 milliseconds; P < 0.001). Nanoliposomal cerivastatin was equally effective or slightly better than cerivastatin in reducing PA pressure (monocrotaline: 67.06 ± 13.64 mm Hg; cerivastatin: 46.31 ± 7.64 mm Hg vs. liposomal cerivastatin: 37.32 ± 9.50 mm Hg) and improving parameters of right ventricular function as measured by increasing PA acceleration time (monocrotaline: 24.68 ± 3.92 milliseconds; cerivastatin: 32.59 ± 6.10 milliseconds vs. liposomal cerivastatin: 34.96 ± 7.51 milliseconds). More importantly, the rate and magnitude of toxic cerivastatin metabolite lactone generation from the intratracheally administered nanoliposomes was significantly lower as compared with intravenously administered free cerivastatin. These studies show that nanoliposome encapsulation improved in vitro and in vivo pharmacologic and safety profile of cerivastatin and may represent a safer approach as a disease-modifying therapy for PAH.

Nanoparticles as safe and effective delivery systems of antifungal agents: Achievements and challenges

Invasive fungal infections are becoming a major health concern in several groups of patients leading to severe morbidity and mortality. Moreover, cutaneous fungal infections are a major cause of visits to outpatient dermatology clinics. Despite the availability of several effective agents in the antifungal drug arena, their therapeutic outcome is less than optimal due to limitations related to drug physicochemical properties and toxicity. For instance, poor aqueous solubility limits the formulation options and efficacy of several azole antifungal drugs while toxicity limits the benefits of many other drugs. Nanoparticles hold great promise to overcome these limitations due to their ability to enhance drug aqueous solubility, bioavailability and antifungal efficacy. Further, drug incorporation into nanoparticles could greatly reduce its toxicity. Despite these interesting nanoparticle features, there are only few marketed nanoparticle-based antifungal drug formulations. This review sheds light on different classes of nanoparticles used in antifungal drug delivery, such as lipid-based vesicles, polymeric micelles, solid lipid nanoparticles, nanostructured lipid carriers, nanoemulsions and dendrimers with emphasis on their advantages and limitations. Translation of these nanoformulations from the lab to the clinic could be facilitated by focusing the research on overcoming problems related to nanoparticle stability, drug loading and high cost of production and standardization.