Reloadable Silk-Hydrogel Hybrid Scaffolds for Sustained and Targeted Delivery of Molecules

Piezoelectric Hydrogels: Hybrid Material Design, Properties, and Biomedical Applications

Hydrogels show great potential in biomedical applications due to their inherent biocompatibility, high water content, and resemblance to the extracellular matrix. However, they lack self-powering capabilities and often necessitate external stimulation to initiate cell regenerative processes. In contrast, piezoelectric materials offer self-powering potential but tend to compromise flexibility. To address this, creating a novel hybrid biomaterial of piezoelectric hydrogels (PHs), which combines the advantageous properties of both materials, offers a systematic solution to the challenges faced by these materials when employed separately. Such innovative material system is expected to broaden the horizons of biomedical applications, such as piezocatalytic medicinal and health monitoring applications, showcasing its adaptability by endowing hydrogels with piezoelectric properties. Unique functionalities, like enabling self-powered capabilities and inducing electrical stimulation that mimics endogenous bioelectricity, can be achieved while retaining hydrogel matrix advantages. Given the limited reported literature on PHs, here recent strategies concerning material design and fabrication, essential properties, and distinctive applications are systematically discussed. The review is concluded by providing perspectives on the remaining challenges and the future outlook for PHs in the biomedical field. As PHs emerge as a rising star, a comprehensive exploration of their potential offers insights into the new hybrid biomaterials.

Synthesis and Characterization of Photo-Cross-Linkable Silk Fibroin Methacryloyl Hydrogel for Biomedical Applications

Photo-cross-linkable hydrogels have recently gained increased interest in the field of biomedical applications. In this study, silk fibroin was derivatized with methacrylic anhydride (MA) to obtain silk fibroin methacryloyl (SFMA), forming hydrogel under UV light exposure in 1 min. The SFMA sol-gel transition did not involve significant structural change at the early stage. Then, the formation of the irreversible β-sheet was confirmed after 24 h. The resulting SFMA hydrogel showed a homogeneous porous structure with pore sizes ranging from 400 to 700 μm, depending on the content. In addition, these hydrogels demonstrated a lower swelling capacity, higher rheological properties and compressive modulus, and slow degradation behavior at higher content, likely due to the higher degree of cross-linking. An experiment with cells indicated the good cell compatibility of these hydrogels, as revealed by Cell Counting Kit-8 (CCK-8) assays. As a tissue-engineered material, this photo-cross-linkable SFMA is expected to have a wide range of applications in the biomedical field.

3D bioprinting of photo-crosslinkable silk methacrylate (SilMA)-polyethylene glycol diacrylate (PEGDA) bioink for cartilage tissue engineering

Articular cartilage damage poses huge burden on healthcare sector globally due to its extremely weak inherent regenerative ability. Three-dimensional (3D) bioprinting for development of cartilage mimic constructs using composite bioinks serves as an emerging perspective. However, difficulty in development of suitable bioink and chemical crosslinking associated inherent toxicity hamper widespread adoption of this technique. To circumvent this, a photo-polymerizable hydrogel-based bioink which helps in recapitulation of the complex cartilage microenvironment is pertinent. Herein, a photo-crosslinkable bioink containing different concentrations of silk methacrylate (SilMA) and polyethylene glycol diacrylate (PEGDA) was mixed with chondrocytes for biofabrication of 3D bioprinted cartilage constructs. The rheological properties, printability of bioink and physico-chemical characterization of printed hydrogel constructs were examined along with cartilaginous tissue formation. The printed SilMA-PEGDA hydrogel constructs possessed proper internal porous structure and demonstrated most reliable rheological properties, printability along with good mechanical, and degradation properties suitable for cartilage regeneration. Live/dead staining showed cytocompatibility of the 3D-bioprinted SilMA-PEGDA constructs. Moreover, a marked increase in cell number and DNA content was observed within the cartilaginous tissue as indicated by cell viability and DNA content quantitation. Biochemical evaluation confirmed the neocartilage formation within SilMA-PEGDA bioprinted constructs as revealed by enhanced deposition of cartilage specific extracellular matrix-sulphated GAG (sGAG) and collagen type II (>2-fold increase, p < 0.001) with time. Finally, immunohistochemical analysis indicated expression of collagen type II and aggrecan which corroborated with cartilaginous tissue formation. Taken together, we conclude that SilMA-PEGDA bioink could be suitable candidate for bioprinting chondrocytes to support cartilage tissue repair and regeneration.

Recent progress in silk fibroin-based flexible electronics

With the rapid development of the Internet of Things (IoT) and the emergence of 5G, traditional silicon-based electronics no longer fully meet market demands such as nonplanar application scenarios due to mechanical mismatch. This provides unprecedented opportunities for flexible electronics that bypass the physical rigidity through the introduction of flexible materials. In recent decades, biological materials with outstanding biocompatibility and biodegradability, which are considered some of the most promising candidates for next-generation flexible electronics, have received increasing attention, e.g., silk fibroin, cellulose, pectin, chitosan, and melanin. Among them, silk fibroin presents greater superiorities in biocompatibility and biodegradability, and moreover, it also possesses a variety of attractive properties, such as adjustable water solubility, remarkable optical transmittance, high mechanical robustness, light weight, and ease of processing, which are partially or even completely lacking in other biological materials. Therefore, silk fibroin has been widely used as fundamental components for the construction of biocompatible flexible electronics, particularly for wearable and implantable devices. Furthermore, in recent years, more attention has been paid to the investigation of the functional characteristics of silk fibroin, such as the dielectric properties, piezoelectric properties, strong ability to lose electrons, and sensitivity to environmental variables. Here, this paper not only reviews the preparation technologies for various forms of silk fibroin and the recent progress in the use of silk fibroin as a fundamental material but also focuses on the recent advanced works in which silk fibroin serves as functional components. Additionally, the challenges and future development of silk fibroin-based flexible electronics are summarized. (1) This review focuses on silk fibroin serving as active functional components to construct flexible electronics. (2) Recent representative reports on flexible electronic devices that applied silk fibroin as fundamental supporting components are summarized. (3) This review summarizes the current typical silk fibroin-based materials and the corresponding advanced preparation technologies. (4) The current challenges and future development of silk fibroin-based flexible electronic devices are analyzed.

Injectable Ultrasonication-Induced Silk Fibroin Hydrogel for Cartilage Repair and Regeneration

Articular cartilage lacks both a nutrient supply and progenitor cells. Once damaged, it has limited self-repair capability. Cartilage tissue engineering provides a promising strategy for regeneration, and the use of injectable hydrogels as scaffolds has recently attracted much attention. Silk fibroin (SF) is an advanced natural material used to construct injectable hydrogels that are nontoxic and can be used efficiently in crosslinking applications. The objective of the present work was to develop an injectable hydrogel using SF in a novel one-step ultrasonication crosslinking method. Gelation kinetics and the characteristics of ultrasonication-induced SF (US-SF) hydrogels were systematically evaluated. The cytocompatibility of US-SF hydrogels was evaluated using rabbit chondrocytes, the Cell Counting Kit-8 testing, and immunofluorescence staining. Furthermore, the in vivo cartilage regenerative ability of US-SF hydrogels was confirmed following subcutaneous administration in nude mice and in situ injections in rabbit osteochondral defect models. These results suggest that US-SF hydrogels could be potential candidates for cartilage repair and regeneration.

Bioactive three-dimensional silk composite in vitro tumoroid model for high throughput screening of anticancer drugs

HYPOTHESIS

Modeling three-dimensional (3D) in vitro culture systems recapitulating spatiotemporal characteristics of native tumor-mass has shown tremendous potential as a pre-clinical tool for drug screening. However, their applications in clinical settings are still limited due to inappropriate recapitulation of tumor topography, culture instability, and poor durability of niche support.

EXPERIMENTS

Here, we have fabricated a bio-active silk composite scaffold assimilating tunable silk from Bombyx mori and - arginine-glycine-aspartate (RGD) rich silk from Antheraea assama to provide a better 3D-matrix for breast (MCF 7) and liver (HepG2) tumoroids. Cellular mechanisms underlying physiological adaptations in 3D constructs and subsequent drug responses were compared with conventional monolayer and multicellular spheroid culture.

FINDINGS

Silk composite matrix assists prolonged growth and high metabolic activity (Cytochrome P450 reductase) in breast and liver 3D-tumoroids. Enhanced stemness expression (Cell surface adhesion receptor; CD44, Aldehyde dehydrogenase 1) and epithelial-mesenchymal-transition markers (E-cadherin, Vimentin) at transcript and protein levels demonstrate that bio-active matrix-assisted 3D environment augmenting metastatic potential in tumoroids. Together, enhanced secretion of Transforming growth factor β (TGFβ), anchorage-independency, and colony-forming potential of cells in the 3D-tumoroids further corroborates the aggressive behavior of cells. Moreover, the multilayered 3D-tumoroids exhibit decreased sensitivity to some known anticancer drugs (Doxorubicin and Paclitaxel). In conclusion, the bio-active silk composite matrix offers an advantage in developing robust and sustainable 3D tumoroids for a high-throughput drug screening platform.

Electrosprayed naringin-loaded microsphere/SAIB hybrid depots enhance bone formation in a mouse calvarial defect model

The burst release of active osteogenic factors, which is not beneficial to osteogenesis, is commonly encountered in bone tissue engineering. The aims of this study were to prepare naringin-loaded microsphere/sucrose acetate isobutyrate (Ng-m-SAIB) hybrid depots, reduce the burst release of naringin (Ng), and improve osteogenesis. The morphology and size distributions of electrosprayed Ng-microspheres were characterized by scanning electron microscopy (SEM). The Ng-microspheres and Ng-m-SAIB depots were characterized by Fourier transform infrared spectroscopy (FTIR) and in vitro release studies. In vitro osteoblast-microsphere interactions and in vivo osteogenesis were assessed after implantation of Ng-m-SAIB depots. The addition of sucrose acetate isobutyrate (SAIB) to monodisperse Ng-microspheres did not cause a change in the chemical structure. The performances of the microspheres in osteoblast-microsphere interactions were better when the naringin content was 4% than when it was at 2% and 6%. On the first day following the loading of Ng-microspheres (2%, 4%, and 6%) into SAIB depots, the burst release was reduced dramatically from 70.9% to 6.3%, 73.1% to 7.2%, and 73.9% to 9.9%, respectively. In addition, after 8 weeks, the new bone formation rate in the calvarial defects of SD rats receiving Ng-m-SAIB was 53.1% compared to 21.2% for the control group and 16.1% for the microsphere-SAIB group. These results demonstrated that Ng-m-SAIB hybrid depots may have promise in bone regeneration applications.

Modulatory effect of simultaneously released magnesium, strontium, and silicon ions on injectable silk hydrogels for bone regeneration

Injectable silk hydrogels are ideal carriers of therapeutic agents due to their biocompatibility and low immunogenicity. Injectable silk hydrogels for bone regeneration have been previously developed but often utilize expensive biologics. In this study, we have developed an injectable silk composite incorporated with a triphasic ceramic called MSM-10 (54 Mg₂SiO₄, 36 Si₃Sr₅ and 10 MgO (wt%)) capable of simultaneously releasing magnesium, silicon, and strontium ions into its environment. These ions have been previously reported to possess therapeutic effects for bone regeneration. MSM-10 particles were incorporated into the silk hydrogels at various weight percentages [0.1 (SMH-0.1), 0.6 (SMH-0.6), 1 (SMH-1) and 2 (SMH-2)]. The effects of the released ions on the physicochemical and biological properties of the silk hydrogel were comprehensively evaluated. Increased MSM-10 loading was found to hinder the gelation kinetics of the silk hydrogel through the reduction of beta-sheet phase formation, which in turn affected the required sonication time for gelation, compressive strength, force of injection, microstructure and in vitro degradation rate. Primary human osteoblasts seeded on SMH-0.6 demonstrated increased proliferation and early alkaline phosphatase activity, as well as enhanced osteogenic gene expression compared to pure silk hydrogel and SMH-0.1. In vivo results in subcutaneous mouse models showed both decreased fibrous capsule formation and increased number of new blood vessels around the injected SMH-0.1 and SMH-0.6 implants compared to pure silk hydrogels. The results in this study indicate that the ions released from MSM-10 is able to influence the physicochemical and biological properties of silk hydrogels, and SMH-0.6 in particular shows promising properties for bone regeneration.

Injectable hydrogels: a new paradigm for osteochondral tissue engineering

Osteochondral tissue engineering has become a promising strategy for repairing focal chondral lesions and early osteoarthritis (OA), which account for progressive joint pain and disability in millions of people worldwide. Towards improving osteochondral tissue repair, injectable hydrogels have emerged as promising matrices due to their wider range of properties such as their high water content and porous framework, similarity to the natural extracellular matrix (ECM), ability to encapsulate cells within the matrix and ability to provide biological cues for cellular differentiation. Further, their properties such as those that facilitate minimally invasive deployment or delivery, and their ability to repair geometrically complex irregular defects have been critical for their success. In this review, we provide an overview of innovative approaches to engineer injectable hydrogels towards improved osteochondral tissue repair. Herein, we focus on understanding the biology of osteochondral tissue and osteoarthritis along with the need for injectable hydrogels in osteochondral tissue engineering. Furthermore, we discuss in detail different biomaterials (natural and synthetic) and various advanced fabrication methods being employed for the development of injectable hydrogels in osteochondral repair. In addition, in vitro and in vivo applications of developed injectable hydrogels for osteochondral tissue engineering are also reviewed. Finally, conclusions and future perspectives of using injectable hydrogels in osteochondral tissue engineering are provided.

A Reloadable Self-Healing Hydrogel Enabling Diffusive Transport of C-Dots Across Gel-Gel Interface for Scavenging Reactive Oxygen Species

While reloadable drug delivery platforms are highly prized for the treatment of a broad spectrum of diseases, the gel-gel interface between hydrogels hinders the intergel diffusive transport of drugs and thus limits the application of hydrogels as reloadable depots. Here, this study reports the circumvention of this barrier by employing a self-healing hydrogel prepared from N-carboxyethyl chitosan and sodium alginate dialdehyde, which are cross-linked via a reversible Schiff base linkage. The injectable and bioadhesive hydrogel shows a rapid gelation time of 47 s. The dynamic self-healing process enables the efficient diffusive transport of carbon quantum dots (C-dots) into an adjacent hydrogel, and thus, the C-dots can be used to scavenge reactive oxygen species from a remote inflammation site. Specifically, the diffusive transport of the C-dots in the self-healing hydrogel after three sequential reloading steps is sevenfold greater than that in the non-self-healing counterpart. In vivo, hematoxylin and eosin staining of the murine skin at the injection site shows no apparent symptoms of inflammation in the group treated with the reloadable self-healing hydrogel. The current strategy represents a promising and straightforward route for the design of a reloadable drug delivery system for future use in clinical application.

Design of Salecan-containing semi-IPN hydrogel for amoxicillin delivery

Salecan is a new linear extracellular β-glucan. The unique structure and beneficial properties of Salecan makes it an appealing material in biomedical applications. In this work, novel drug devices based on Salecan in a hydrogel matrix of poly(N-(3-dimethylaminopropyl)acrylamide-co-acrylamide) (Salecan/PDA) were fabricated via free radical polymerization for controlled release of amoxicillin. It was demonstrated that amoxicillin was efficiently encapsulated into the developed hydrogels and released in a Salecan dose-dependent and pH-sensitive manner. Furthermore, cell toxicity and adhesion assays confirmed that these drug carriers were biocompatible. Altogether, this study opens a new avenue to fabricate hydrogel devices for controlled delivery of drug.