Control of Ligand-Binding Specificity Using Photocleavable Linkers in AFM Force Spectroscopy

Treatment of flexibility of protein backbone in simulations of protein-ligand interactions using steered molecular dynamics

To ensure that an external force can break the interaction between a protein and a ligand, the steered molecular dynamics simulation requires a harmonic restrained potential applied to the protein backbone. A usual practice is that all or a certain number of protein's heavy atoms or Cα atoms are fixed, being restrained by a small force. This present study reveals that while fixing both either all heavy atoms and or all Cα atoms is not a good approach, while fixing a too small number of few atoms sometimes cannot prevent the protein from rotating under the influence of the bulk water layer, and the pulled molecule may smack into the wall of the active site. We found that restraining the Cα atoms under certain conditions is more relevant. Thus, we would propose an alternative solution in which only the Cα atoms of the protein at a distance larger than 1.2 nm from the ligand are restrained. A more flexible, but not too flexible, protein will be expected to lead to a more natural release of the ligand.

Biophysical investigations using atomic force microscopy can elucidate the link between mouthfeel and flavour perception

Food texture, along with taste and odour, is an important factor in determining food flavour. However, the physiological properties of oral texture perception require greater examination and definition. Here we explore recent trends and perspectives related to mouthfeel and its relevance in food flavour perception, with an emphasis on the biophysical point of view and methods. We propose that atomic force microscopy, combined with other biophysical techniques and more traditional food science approaches, offers a unique opportunity to study the mechanisms of mouthfeel at cellular and molecular levels. With this knowledge, food composition could be modified to develop healthier products by limiting salt, sugar, fat and calories while maintaining sensory qualities and consumer acceptance.

Atomic Force Microscopy: An Introduction

Imaging of nano-sized particles and sample features is crucial in a variety of research fields, for instance, in biological sciences, where it is paramount to investigate structures at the single particle level. Often, two-dimensional images are not sufficient, and further information such as topography and mechanical properties are required. Furthermore, to increase the biological relevance, it is desired to perform the imaging in close to physiological environments. Atomic force microscopy (AFM) meets these demands in an all-in-one instrument. It provides high-resolution images including surface height information leading to three-dimensional information on sample morphology. AFM can be operated both in air and in buffer solutions. Moreover, it has the capacity to determine protein and membrane material properties via the force spectroscopy mode. Here we discuss the principles of AFM operation and provide examples of how biomolecules can be studied. New developments in AFM are discussed, and by including approaches such as bimodal AFM and high-speed AFM (HS-AFM), we show how AFM can be used to study a variety of static and dynamic single biomolecules and biomolecular assemblies.

Discrimination between cyclic nucleotides in a cyclic nucleotide-gated ion channel

Cyclic nucleotide-gated ion channels are crucial in many physiological processes such as vision and pacemaking in the heart. SthK is a prokaryotic homolog with high sequence and structure similarities to hyperpolarization-activated and cyclic nucleotide-modulated and cyclic nucleotide-gated channels, especially at the level of the cyclic nucleotide binding domains (CNBDs). Functional measurements showed that cyclic adenosine monophosphate (cAMP) is a channel activator while cyclic guanosine monophosphate (cGMP) barely leads to pore opening. Here, using atomic force microscopy single-molecule force spectroscopy and force probe molecular dynamics simulations, we unravel quantitatively and at the atomic level how CNBDs discriminate between cyclic nucleotides. We find that cAMP binds to the SthK CNBD slightly stronger than cGMP and accesses a deep-bound state that a cGMP-bound CNBD cannot reach. We propose that the deep binding of cAMP is the discriminatory state that is essential for cAMP-dependent channel activation.

Recent advances in sensing the inter-biomolecular interactions at the nanoscale - A comprehensive review of AFM-based force spectroscopy

Biomolecular interactions underpin most processes inside the cell. Hence, a precise and quantitative understanding of molecular association and dissociation events is crucial, not only from a fundamental perspective, but also for the rational design of biomolecular platforms for state-of-the-art biomedical and industrial applications. In this context, atomic force microscopy (AFM) appears as an invaluable experimental technique, allowing the measurement of the mechanical strength of biomolecular complexes to provide a quantitative characterization of their interaction properties from a single molecule perspective. In the present review, the most recent methodological advances in this field are presented with special focus on bioconjugation, immobilization and AFM tip functionalization, dynamic force spectroscopy measurements, molecular recognition imaging and theoretical modeling. We expect this work to significantly aid in grasping the principles of AFM-based force spectroscopy (AFM-FS) technique and provide the necessary tools to acquaint the type of data that can be achieved from this type of experiments. Furthermore, a critical assessment is done with other nanotechnology techniques to better visualize the future prospects of AFM-FS.

Exploring the impact of PEGylation on the cell-nanomicelle interactions by AFM-based single-molecule force spectroscopy and force tracing

PEGylation has been considered the gold standard method for the modification of various drug delivery systems since the last century. However, the impact of PEGylation on the dynamic interaction between drug carriers and cell membranes has not been quantitatively clarified. Herein, the cellular binding and receptor-mediated endocytosis of a model PEGylated polypeptide nanomicelle were systematically investigated at the single-particle level using AFM-based single-molecule force spectroscopy (SMFS) and force tracing. A self-assembled elastin-like polypeptide (ELP) nanomicelle, which is capable of cross-linking, gastrin-releasing peptide (GRP) modification, and PEGylation was prepared. The cross-linked ELP-based nanomicelles exhibited outstanding stability in a broad temperature range of 4-40 °C, which facilitate the drug loading, as well as our cell-nanomicelle study at the single particle level. The unbinding force between the cross-linked ELP-based nanomicelles and the GRP receptor (GRPR)-containing cell (PC-3) membranes was quantitatively measured by AFM-SMFS. It is found that the PEGylated GRP-displaying nanomicelles exhibit the highest unbinding force, indicating the enhanced specific binding effect of PEGylation. Furthermore, the receptor-mediated endocytosis of the cross-linked ELP-based nanomicelles was monitored with the help of force tracing based on AFM-SMFS. Our results show that PEGylation decreases the endocytic force, duration, and engulfment depth of the PEGylated GRP-displaying nanomicelles, but increases their endocytic velocity, which results from the elimination of non-specific interactions during endocytosis. These observations demonstrate the diverse and complex roles of PEGylation on the interaction of polypeptide nanomicelles to cell membranes and may shed light on the rational design of organic polymer-based drug delivery systems aiming for active and passive targeting strategies. STATEMENT OF SIGNIFICANCE: A self-assembled elastin-like polypeptide (ELP) nanomicelle, which can be easily cross-linked, gastrin-releasing peptide (GRP) modified, and PEGylated, is designed. The AFM-SMFS experiment shows that PEGylation can enhance specific binding of the nanomicelles to the receptors on cell membranes. The force tracing experiment indicates that PEGylation decreases the endocytic force as well as engulfment depth of the nanomicelles through the elimination of non-specific interactions. PEGylation can benefit the drug delivery systems aiming at active targeting, while might not be an ideal modification for drug carriers designed for passive targeting, whose cellular uptake mainly depends on non-specific interactions.

Force Mapping Reveals the Spatial Distribution of Individual Proteins in a Neuron

Conventional methods for studying the spatial distribution and expression level of proteins within neurons have primarily relied on immunolabeling and/or signal amplification. Here, we present an atomic force microscopy (AFM)-based nanoscale force mapping method, where Anti-LIMK1-tethered AFM probes were used to visualize individual LIMK1 proteins in cultured neurons directly through force measurements. We observed that the number density of LIMK1 decreased in neuronal somas after the cells were depolarized. We also elucidated the spatial distribution of LIMK1 in single spine areas and found that the protein predominantly locates at heads of spines rather than dendritic shafts. The study demonstrates that our method enables unveiling of the abundance and spatial distribution of a protein of interest in neurons without signal amplification or labeling. We expected that this approach should facilitate the studies of protein expression phenomena in depth in a wide range of biological systems.

Atomic force microscopy applied to interrogate nanoscale cellular chemistry and supramolecular bond dynamics for biomedical applications

Understanding biological interactions at a molecular level grants valuable information relevant to improving medical treatments and outcomes. Among the suite of technologies available, Atomic Force Microscopy (AFM) is unique in its ability to quantitatively probe forces and receptor-ligand interactions in real-time. The ability to assess the formation of supramolecular bonds and intermediates in real-time on surfaces and living cells generates important information relevant to understanding biological phenomena. Combining AFM with fluorescence-based techniques allows for an unprecedented level of insight not only concerning the formation and rupture of bonds, but understanding medically relevant interactions at a molecular level. As the ability of AFM to probe cells and more complex models improves, being able to assess binding kinetics, chemical topographies, and garner spectroscopic information will likely become key to developing further improvements in fields such as cancer, nanomaterials, and virology. The rapid response to the COVID-19 crisis, producing information regarding not just receptor affinities, but also strain-dependent efficacy of neutralizing nanobodies, demonstrates just how viable and integral to the pre-clinical development of information AFM techniques are in this era of medicine.

Biophysical Approaches for Applying and Measuring Biological Forces

Over the past decades, increasing evidence has indicated that mechanical loads can regulate the morphogenesis, proliferation, migration, and apoptosis of living cells. Investigations of how cells sense mechanical stimuli or the mechanotransduction mechanism is an active field of biomaterials and biophysics. Gaining a further understanding of mechanical regulation and depicting the mechanotransduction network inside cells require advanced experimental techniques and new theories. In this review, the fundamental principles of various experimental approaches that have been developed to characterize various types and magnitudes of forces experienced at the cellular and subcellular levels are summarized. The broad applications of these techniques are introduced with an emphasis on the difficulties in implementing these techniques in special biological systems. The advantages and disadvantages of each technique are discussed, which can guide readers to choose the most suitable technique for their questions. A perspective on future directions in this field is also provided. It is anticipated that technical advancement can be a driving force for the development of mechanobiology.

Modified cytosines versus cytosine in a DNA polymerase: retrieving thermodynamic and kinetic constants at the single molecule level

DNA methylation plays key roles in various areas, such as gene expression, regulation, epigenetics, and cancers. Since 5-methylcytosine (5mC) is commonly present in methylated DNA, characterizing the binding kinetics and thermodynamics of the nucleotide to the enzymatic pocket can help to understand the DNA replication process. Furthermore, 5-carboxycytosine (5caC) is a form that appears through the iterative oxidation of 5mC, and its effect on the DNA replication process is still not well known. Here, we immobilized a DNA polymerase (DNAP) with an orientation control on a tip of an atomic force microscope (AFM), and observed the interaction between the immobilized deoxyguanosine triphosphate (dGTP) on the surface and the DNAP in the presence of a DNA duplex. The interaction probability increased as the concentration of the DNA strand, and the affinity constant between the DNAP and DNA was obtained by fitting the change. Increasing the concentration of dGTP in solution diminished the interaction probability, and a fitting allowed us to retrieve the affinity constant between dGTP and the DNAP holding the DNA in the reaction pocket. Because the dissociation constant could be obtained through the loading rate dependence of the unbinding force value, both affinity and kinetic constants for cytosine (C), 5mC, and 5caC in the DNAP were compared in the light of the steric and electronic effect of the substituents at 5-position of cytosine.

Quantifying molecular- to cellular-level forces in living cells

Mechanical cues have been suggested to play an important role in cell functions and cell fate determination, however, such physical quantities are challenging to directly measure in living cells with single molecule sensitivity and resolution. In this review, we focus on two main technologies that are promising in probing forces at the single molecule level. We review their theoretical fundamentals, recent technical advancements, and future directions, tailored specifically for interrogating mechanosensitive molecules in live cells.

Transforming de novo protein α3D into a mechanically stable protein by zinc binding

α₃D is a de novo designed three-helix bundle protein. Like most naturally occurring helical proteins, it is mechanically labile with an unfolding force of <15 pN, revealed by atomic force microscopy-based single-molecule force spectroscopy (AFM-SMFS). This protein has been further designed with a tri-cysteine metal-binding site, named α₃DIV, which can bind heavy transition metals. Here, we demonstrate that incorporating such a metal-binding site can transform this mechanically labile protein into a stable one. We show that zinc binds to the tri-cysteine site and increases the unfolding force to ∼160 pN. This force is one order of magnitude higher than that of the apo-protein (<15 pN). Moreover, the unfolding mechanism of Zn-α₃DIV indicates the correct zinc binding with the tri-cysteine site, forming three mechanostable Zn-thiolate bonds. Thus, α₃DIV could be a potential α-helical structure-based building block for synthesizing biomaterials with tunable mechanical properties.

Deciphering Single-Bacterium Adhesion Behavior Modulated by Extracellular Electron Transfer

For bacterial adhesion and biofilm formation, a thorough understanding of the mechanism and effective modulating is lacking due to the complex extracellular electron transfer (EET) at bacteria-surface interfaces. Here, we explore the adhesion behavior of a model electroactive bacteria under various metabolic conditions by an integrated electrochemical single-cell force microscopy system. A nonlinear model between bacterial adhesion force and electric field intensity is established, which provides a theoretical foundation for precise tuning of bacterial adhesion strength by the surface potential and the direction and flux of electron flow. In particular, based on quantitative analyses with equivalent charge distribution modeling and wormlike chain numerical simulations, it is demonstrated that the chain conformation and unfolding events of outer membrane appendages are dominantly impacted by the dynamic bacterial EET processes. This reveals how the anisotropy of bacterial conductive structure can translate into the desired adhesion behavior in different scenarios.

DNA building blocks for AFM tip functionalization: An easy, fast and stable strategy

Biosensing atomic force microscopy (AFM) offers the unique feature to determine the energy landscape of a bimolecular interaction at the real single molecule level. Furthermore, simultaneous and label-free mapping of molecular recognition and the determination of sample topography at the nanoscale gets possible. A prerequisite and one of the major parts in biosensing AFM are the bio-functionalized AFM tips. In the past decades, different approaches for tip functionalization have been developed. Using these functionalization strategies, several biological highly relevant interactions at the single molecule level have been explored. For the most common approach, the use of a heterobifunctional poly(ethylenglycol) crosslinker, a broad range of linkers for different chemical coupling strategies is available. Nonetheless, the time consuming functionalization protocol as well as the broad distribution of rupture length reduces the possibility of automation and may reduce the accuracy of the results. Here we present a stable and fast forward approach based on tetra-functional DNA tetrahedra. A fast functionalization and a sharp defined distribution of rupture length gets possible with low effort and high success rate. We tested the performance on the classical avidin biotin system by using tetrahedra with three disulfide legs for stable and site directed coupling to gold coated tips and a biotinylated end at the fourth vertex. A special advantage appears when working with a DNA aptamer as sensing molecule. In this case, the fourth strand can be extended by a certain DNA sequence complementary to the linkage part of an aptamer. This AFM tip functionalization protocol was applied on thrombin using DNA aptamers directed against the fibrinogen binding side of human thrombin.

Visible-to-NIR-Light Activated Release: From Small Molecules to Nanomaterials

Photoactivatable (alternatively, photoremovable, photoreleasable, or photocleavable) protecting groups (PPGs), also known as caged or photocaged compounds, are used to enable non-invasive spatiotemporal photochemical control over the release of species of interest. Recent years have seen the development of PPGs activatable by biologically and chemically benign visible and near-infrared (NIR) light. These long-wavelength-absorbing moieties expand the applicability of this powerful method and its accessibility to non-specialist users. This review comprehensively covers organic and transition metal-containing photoactivatable compounds (complexes) that absorb in the visible- and NIR-range to release various leaving groups and gasotransmitters (carbon monoxide, nitric oxide, and hydrogen sulfide). The text also covers visible- and NIR-light-induced photosensitized release using molecular sensitizers, quantum dots, and upconversion and second-harmonic nanoparticles, as well as release via photodynamic (photooxygenation by singlet oxygen) and photothermal effects. Release from photoactivatable polymers, micelles, vesicles, and photoswitches, along with the related emerging field of photopharmacology, is discussed at the end of the review.

Atomic Force Microscopy-Based Force Spectroscopy and Multiparametric Imaging of Biomolecular and Cellular Systems

During the last three decades, a series of key technological improvements turned atomic force microscopy (AFM) into a nanoscopic laboratory to directly observe and chemically characterize molecular and cell biological systems under physiological conditions. Here, we review key technological improvements that have established AFM as an analytical tool to observe and quantify native biological systems from the micro- to the nanoscale. Native biological systems include living tissues, cells, and cellular components such as single or complexed proteins, nucleic acids, lipids, or sugars. We showcase the procedures to customize nanoscopic chemical laboratories by functionalizing AFM tips and outline the advantages and limitations in applying different AFM modes to chemically image, sense, and manipulate biosystems at (sub)nanometer spatial and millisecond temporal resolution. We further discuss theoretical approaches to extract the kinetic and thermodynamic parameters of specific biomolecular interactions detected by AFM for single bonds and extend the discussion to multiple bonds. Finally, we highlight the potential of combining AFM with optical microscopy and spectroscopy to address the full complexity of biological systems and to tackle fundamental challenges in life sciences.