In-Situ Surface Reconstruction of InN Nanosheets for Efficient CO2 Electroreduction into Formate

Indium Nitride Nanowires: Low Redox Potential Anodes for Lithium-Ion Batteries

Advanced lithium-ion batteries (LIBs) are crucial to portable devices and electric vehicles. However, it is still challenging to further develop the current anodic materials such as graphite due to the intrinsic limited capacity and sluggish Li-ion diffusion. Indium nitride (InN), which is a new type of anodic material with low redox potential (<0.7 V vs Li/Li+) and narrow bandgap (0.69 eV), may serve as a new high-energy density anode material for LIBs. Here, the growth of 1D single crystalline InN nanowires is reported on Au-decorated carbon fibers (InN/Au-CFs) via chemical vapor deposition, possessing a high aspect ratio of 400. The binder-free Au-CFs with high conductivity can provide abundant sites and enhance binding force for the dense growth of InN nanowires, displaying shortened Li ion diffusion paths, high structural stability, and fast Li+ kinetics. The InN/Au-CFs can offer stable and high-rate Li delithiation/lithiation without Li deposition, and achieve a remarkable capacity of 632.5 mAh g-1 at 0.1 A g-1 after 450 cycles and 416 mAh g-1 at a high rate of 30 A g-1. The InN nanowires as battery anodes shall hold substantial promise for fulfilling superior long-term cycling performance and high-rate capability for advanced LIBs.

Reconstructed Bismuth Oxide through in situ Carbonation by Carbonate-containing Electrolyte for Highly Active Electrocatalytic CO2 Reduction to Formate

The catalyst-reconstruction makes it challenging to clarify the practical active sites and unveil the actual reaction mechanism during the CO2 electroreduction reaction (CO2 RR). However, currently the impact of the electrolyte microenvironment in which the electrolyte is in contact with the catalyst is overlooked and might induce a chemical evolution, thus confusing the reconstruction process and mechanism. In this work, the carbonate adsorption properties of metal oxides were investigated, and the mechanism of how the electrolyte carbonate affect the chemical evolution of catalysts were discussed. Notably, Bi2 O3 with weak carbonate adsorption underwent a chemical reconstruction to form the Bi2 O2 CO3 /Bi2 O3 heterostructure. Furthermore, in situ and ex situ characterizations unveiled the formation mechanism of the heterostructure. The in situ formed Bi2 O2 CO3 /Bi2 O3 heterostructure with strong electron interaction served as the highly active structure for CO2 RR, achieving a formate Faradaic efficiency of 98.1 % at -0.8 Vvs RHE . Theoretical calculations demonstrate that the significantly tuned p-orbit electrons of the Bi sites in Bi2 O2 CO3 /Bi2 O3 optimized the adsorption of the intermediate and lowered the energy barrier for the formation of *OCHO. This work elucidates the mechanism of electrolyte microenvironment for affecting catalyst reconstruction, which contributes to the understanding of reconstruction process and clarification of the actual catalytic structure.

Stability Issues in Electrochemical CO2 Reduction: Recent Advances in Fundamental Understanding and Design Strategies

Electrochemical CO2 reduction reaction (CO2 RR) offers a promising approach to close the anthropogenic carbon cycle and store intermittent renewable energy in fuels or chemicals. On the path to commercializing this technology, achieving the long-term operation stability is a central requirement but still confronts challenges. This motivates to organize the present review to systematically discuss the stability issue of CO2 RR. This review starts from the fundamental understanding on the destabilization mechanisms of CO2 RR, with focus on the degradation of electrocatalyst and change of reaction microenvironment during continuous electrolysis. Subsequently, recent efforts on catalyst design to stabilize the active sites are summarized, where increasing atomic binding strength to resist surface reconstruction is highlighted. Next, the optimization of electrolysis system to enhance the operation stability by maintaining reaction microenvironment especially mitigating flooding and carbonate problems is demonstrated. The manipulation on operation conditions also enables to prolong CO2 RR lifespan through recovering catalytically active sites and mass transport process. This review finally ends up by indicating the challenges and future opportunities.

Enriching Metal-Oxygen Species and Phosphate Modulating of Active Sites for Robust Electrocatalytical CO2 Reduction

Direct electrochemical reduction of CO2 (CO2 RR) into value-added chemicals is a promising solution to reduce carbon emissions. The activity of CO2 RR is influenced deeply by the reaction microenvironment and electronic properties of the catalysts. Herein, the surface PO4 3- anions are tuned to modulate the local microenvironment and the electronic properties of the indium-based catalyst with abundant metal-oxygen species enabling efficient electrochemical conversion of CO2 to HCOO- . Indium nanoparticles coupled with PO4 3- anions (PO4 3- -In NPs) achieve a high selectivity of HCOO- up to 91.4% at a low potential of -0.98 V versus reversible hydrogen electrode (versus RHE) and a high HCOO- partial current density of 279.3 mA cm-2 at -1.1 V versus RHE in the electrochemical flow cell. In situ and ex situ characterizations confirm the PO4 3- anions keep stable on the surface of indium during CO2 RR, accelerating the generation of OCHO* intermediate. From density functional theory calculations, PO4 3- anions enrich the metal-oxygen species on the substrate to optimize the electronic structure of the catalysts and induce a local microenvironment with massive K+ ions on the interface, thus reducing the activation energy barrier of CO2 RR.

Indium Cyanamide for Industrial-Grade CO2 Electroreduction to Formic Acid

Developing industrial-grade electroreduction of CO2 to produce formate (HCOO-)/formic acid (HCOOH) depends on highly active electrocatalysts. However, structural changes due to the inevitable self-reduction of catalysts result in severe long-term stability issues at industrial-grade current density. Herein, linear cyanamide anion ([NCN]2-)-constructed indium cyanamide nanoparticles (InNCN) were investigated for CO2 reduction to HCOO- with a Faradaic efficiency of up to 96% under a partial current density (jformate) of 250 mA cm-2. Bulk electrolysis at a jformate of 400 mA cm-2 requires only -0.72 VRHE applied potential with iR correction. It also achieves continuous production of pure HCOOH at ∼125 mA cm-2 for 160 h. The excellent activity and stability of InNCN are attributed to its unique structural features, including strongly σ-donating [NCN]2- ligands, the potential structural transformation of [N═C═N]2- and [N≡C-N]2-, and the open framework structure. This study affirms metal cyanamides as promising novel materials for electrocatalytic CO2 reduction, broadening the variety of CO2 reduction catalysts and the understanding of structure-activity relationships.

Recent Progress in Electrocatalytic Reduction of CO2

A stable life support system in the spacecraft can greatly promote long-duration, far-distance, and multicrew manned space flight. Therefore, controlling the concentration of CO2 in the spacecraft is the main task in the regeneration system. The electrocatalytic CO2 reduction can effectively treat the CO2 generated by human metabolism. This technology has potential application value and good development prospect in the utilization of CO2 in the space station. In this paper, recent research progress for the electrocatalytic reduction of CO2 was reviewed. Although numerous promising accomplishments have been achieved in this field, substantial advances in electrocatalyst, electrolyte, and reactor design are yet needed for CO2 utilization via an electrochemical conversion route. Here, we summarize the related works in the fields to address the challenge technology that can help to promote the electrocatalytic CO2 reduction. Finally, we present the prospective opinions in the areas of the electrocatalytic CO2 reduction, especially for the space station and spacecraft life support system.

Bi2S3 nanorods grown on multiwalled carbon nanotubes as highly active catalysts for CO2 electroreduction to formate

Bi-based materials are promising electrocatalysts for CO₂ reduction but one of the key technological hurdles is the design of stable, active and affordable Bi-based catalysts over a wide potential range. Herein, Bi₂S₃/CNTs nanocomposites are constructed by anchoring bismuth sulfide (Bi₂S₃) nanorods onto the multiwalled carbon nanotubes (CNTs) and utilizing them in electrocatalytic CO₂ reduction. CNTs, as a support, not only guarantee the conductivity and dispersibility of Bi₂S₃ nanorods but also improve the electrolyte infiltration and optimize the electronic structure of the Bi₂S₃. As expected, the Bi₂S₃/CNTs nanocomposite exhibits a faradaic efficiency for HCOO^- (FE_HCOO-) of 99.3% with a current density of -20.3 mA cm^-2 at -0.91 V vs. RHE. The FE_HCOO- is stably maintained at over > 91% in a wide potential window from -0.71 V to -1.31 V. Theoretical calculation analyses reveal that the strong interaction between Bi₂S₃ and CNTs is conductive to decreasing the energy barrier of *OCHO, stabilizing the intermediate *OCHO, and inhibiting the hydrogen evolution reaction. The current study provides an insightful understanding of the mechanism of the CO₂ electroreduction reaction, and paves a new way for developing superior and affordable electrocatalysts.

Metal-Decorated InN Monolayer Senses N2 against CO2

Poor selectivity is a common problem faced by gas sensors. In particular, the contribution of each gas cannot be reasonably distributed when a binary mixture gas is co-adsorbed. In this paper, taking CO₂ and N₂ as an example, density functional theory is used to reveal the mechanism of selective adsorption of a transition metal (Fe, Co, Ni, and Cu)-decorated InN monolayer. The results show that Ni decoration can improve the conductivity of the InN monolayer while at the same time demonstrating an unexpected affinity for binding N₂ instead of CO₂. Compared with the pristine InN monolayer, the adsorption energies of N₂ and CO₂ on the Ni-decorated InN are dramatically increased from -0.1 to -1.93 eV and from -0.2 to -0.66 eV, respectively. Interestingly, for the first time, the density of states demonstrates that the Ni-decorated InN monolayer achieves a single electrical response to N₂, eliminating the interference of CO₂. Furthermore, the d-band center theory explains the advantage of Ni decorated in gas adsorption over Fe, Co, and Cu atoms. We also highlight the necessity of thermodynamic calculations in evaluating practical applications. Our theoretical results provide new insights and opportunities for exploring N₂-sensitive materials with high selectivity.

In Situ Surface Reconstruction of Catalysts for Enhanced Hydrogen Evolution

The in situ surface reconstitution of a catalyst for hydrogen evolution refers to its structure evolution induced by strong interactions with reaction intermediates during the hydrogen evolution reaction (HER), which eventually leads to the self-optimization of active sites. In consideration of the superior performance that can be achieved by in situ surface reconstitution, more and more attention has been paid to the relationship between active site structure evolution and the self-optimization of HER activity. More and more in situ and/or operando techniques have been explored to track the dynamic structural evolution of HER catalysts in order to clarify the underlying mechanism. This review summarizes recent advances in various types of reconstruction such as the reconfiguration of crystallinity, morphological evolution, chemical composition evolution, phase transition refactoring, surface defects, and interface refactoring in the HER process. Finally, different perspectives and outlooks are offered to guide future investigations. This review is expected to provide some new clues for a deeper understanding of in situ surface reconfiguration in hydrogen evolution reactions and the targeted design of catalysts with desirable structures.

Structural Reconstruction of Catalysts in Electroreduction Reaction: Identifying, Understanding, and Manipulating

Electroreduction transformation of small molecules (CO₂ , N₂ , and H₂ O) into chemical feedstocks offers a promising approach to eliminate carbon emissions and harness renewable energy. Most cathodic catalysts often undergo structural transformation under operating electroreduction conditions. These structural reconstructions are reflected in changes in their catalytic activity. In-depth understanding of the change of active sites and influence parameters of reconstruction behaviors is an essential precondition for the design of highly efficient catalysts. Despite the previous achievements, comprehensive insight toward the structural evolution mechanism in cathodic catalysts, compared to anode ones, under reaction conditions is still lacking. Herein, an overview of structural reconstruction for cathodic catalysts in terms of fundamental mechanisms, reconstruction process, advanced characterizations, and influencing parameters is provided. On this basis, the typical strategies for manipulating the structural reconfiguration of catalysts are also explicitly discussed from the catalyst structure and working environment. By delivering the mechanism, strategies, insights, and techniques, this review will provide a comprehensive understanding of the structural reconstruction of cathodic catalysts in electroreduction reactions and future guidelines for their rational development.

Surface Structure Engineering of PdAg Alloys with Boosted CO2 Electrochemical Reduction Performance

Converting carbon dioxide into high-value-added formic acid as a basic raw material for the chemical industry via an electrochemical process under ambient conditions not only alleviates greenhouse gas effects but also contributes to effective carbon cycles. Unfortunately, the most commonly used Pd-based catalysts can be easily poisoned by the in situ formed minor byproduct CO during the carbon dioxide reduction reaction (CRR) process. Herein, we report a facile method to synthesize highly uniformed PdAg alloys with tunable morphologies and electrocatalytic performance via a simple liquid synthesis approach. By tuning the molar ratio of the Ag⁺ and Pd²⁺ precursors, the morphologies, composition, and electrocatalytic activities of the obtained materials were well-regulated, which was characterized by TEM, XPS, XRD, as well as electrocatalytic measurements. The CRR results showed that the as-obtained Pd₃Ag exhibited the highest performance among the five samples, with a faradic efficient (FE) of 96% for formic acid at -0.2 V (vs. reference hydrogen electrode (RHE)) and superior stability without current density decrease. The enhanced ability to adsorb and activate CO₂ molecules, higher resistance to CO, and a faster electronic transfer speed resulting from the alloyed PdAg nanostructure worked together to make great contributions to the improvement of the CRR performance. These findings may provide a new feasible route toward the rational design and synthesis of alloy catalysts with high stability and selectivity for clean energy storage and conversion in the future.

Effects of the Catalyst Dynamic Changes and Influence of the Reaction Environment on the Performance of Electrochemical CO2 Reduction

Electrochemical reduction of carbon dioxide (CO₂ ) is substantially researched due to its potential for storing intermittent renewable electricity and simultaneously helping mitigating the pressing CO₂ emission concerns. The major challenge of electrochemical CO₂ reduction lies on having good controls of this reaction due to its complicated reaction networks and its unusual sensitivity to the dynamic changes of the catalyst structure (chemical states, compositions, facets and morphology, etc.), and to the non-catalyst components at the electrode/electrolyte interface, in another word the reaction environments. To date, a comprehensive analysis on the interplays between the above catalyst-dynamic-changes/reaction environments and the CO₂ reduction performance is rare, if not none. In this review, the catalyst dynamic changes observed during the catalysis are discussed based on the recent reports of electrochemical CO₂ reduction. Then, the above dynamic changes are correlated to their effects on the catalytic performance. The influences of the reaction environments on the performance of CO₂ reduction are also discussed. Finally, some perspectives on future investigations are offered with the aim of understanding the origins of the effects from the catalyst dynamic changes and the reaction environments, which will allow one to better control the CO₂ reduction toward the desired products.

Facet-Defined Strain-Free Spinel Oxide for Oxygen Reduction

Exposing facet and surface strain are critical factors affecting catalytic performance but unraveling the composition-dependent activity on specific facets under strain-controlled environment is still challenging due to the synthetic difficulties. Herein, we achieved a (001) facet-defined Co-Mn spinel oxide surface with different surface compositions using epitaxial growth on Co₃O₄ nanocube template. We adopted composition gradient synthesis to relieve the strain layer by layer, minimizing the surface strain effect on catalytic activity. In this system, experimental and calculational analyses of model oxygen reduction reaction (ORR) activity reveals a volcano-like trend with Mn/Co ratios because of an adequate charge transfer from octahedral-Mn to neighboring Co. Co_0.5Mn_0.5 as an optimized Mn/Co ratio exhibits both outstanding ORR activity (0.894 V vs RHE in 1 M KOH) and stability (2% activity loss against chronoamperometry). By controlling facet and strain, this study provides a well-defined platform for investigating composition-structure-activity relationships in electrocatalytic processes.

In-situ generation of In2O3 nanoparticles inside In[Co(CN)6] quasi-metal-organic-framework nanocubes for efficient electroreduction of CO2 to formate

Three-dimensional (3D) network structure of metal-organic framework (MOF) can accommodate outstanding electrocatalysis performances, but always collapse during the conversion to active materials or applications process. How to maintain the 3D network when producing active species is of great importance for full application of MOF. Herein, a new MOF material, In[Co(CN)₆] (In-Co PBA) nanocubes, are firstly synthesized. Through a controlled low-temperature deligandation process, the In-Co PBA nanocubes are transformed to a novel In₂O₃@In-Co PBA quasi-MOF nanocubes, which basically retain the 3D porous structure of PBA but with in situ generated In₂O₃ nanoparticles inside. When used as CO₂RR electrocatalyst, such a novel cubic composite structure exhibits excellent performances with faradaic efficiency of 85% for formate at a potential of -0.96 V and with current density of 31.5 mA·cm^-2 at -1.32 V, surpassing most of the reported indium-based catalysts. The excellent performance can be attributed to the special composite structure, which provides not only active sites by In₂O₃ nanoparticles to catalyze CO₂RR, but also the 3D porous framework by quasi-MOF to accelerate gaseous exchange and electrolyte permeation and prevent the electrode choking. This work offers a new strategy for the design of post-transition metal catalysts and the structure design of quasi-MOF.

Bias-Adaptable CO2-to-CO Conversion via Tuning the Binding of Competing Intermediates

CO₂ electroreduction powered by renewable electricity represents a promising method to enclose anthropogenic carbon cycle. Current catalysts display high selectivity toward the desired product only over a narrow potential window due primarily to unoptimized intermediate binding. Here, we report a functional ligand modification strategy in which palladium nanoparticles are encapsulated inside metal-organic frameworks with 2,2'-bipyridine organic linkers to tune intermediate binding and thus to sustain a highly selective CO₂-to-CO conversion over widened potential window. The catalyst exhibits CO faradaic efficiency in excess of 80% over a potential window from -0.3 to -1.2 V and reaches the maxima of 98.2% at -0.8 V. Mechanistic studies show that the 2,2'-bipyridine on Pd surface reduces the binding strength of both *H and *CO, a too strong binding of which leads to competing formate production and CO poison, respectively, and thus enhances the selectivity and stability of CO product.

Hybrid Metal-Boron Diatomic Site Embedded in C2 N Monolayer Promotes C-C Coupling in CO2 Electroreduction

Double-atom catalyst (DAC) has gained much interest for its versatile tuning and synergistic effect of dual-atom active sites. Metal (M)-metal (M) diatomic sites, either homo- or heteronuclear, are typically researched. Hybrid metal-non-metal combined sites have rarely been studied and even the viability of such active sites are unknown. Herein, CO₂ electroreduction (CO₂ RR) is explored on M@X-C₂ N (M = Fe, Co, Ni, and Cu; X = S, P, and B) which renders naturally generated M-X diatomic site. Using spin-polarized density functional theory coupled with computational hydrogen electrode model, it is demonstrated that the functionality of hybrid M-B dual-atom center is superior over that of a single- or double-M center in driving CO₂ RR especially C-C coupling. Among metal-boron DACs studies, Fe@B-C₂ N (μ = 2μ_B ) exhibits the lowest free energy barrier of 0.17 eV in C-C coupling whereas Ni@B-C₂ N (μ = 0μ_B ) mainly produces CH₄ with the lowest barrier of 0.42 eV. Hence, the electronic spin state of M can be particularly important in modulating selectivity and C-C coupling barrier in CO₂ RR. Fe@B-C₂ N is predicted as the promising catalyst for CO₂ RR towards C₂₊ products owing partially to its enhanced spin state. The findings can enrich the design strategy of electrocatalysts normally running at ambient conditions.

Recent advances in activating surface reconstruction for the high-efficiency oxygen evolution reaction

A climax in the development of cost-effective and high-efficiency transition metal-based electrocatalysts has been witnessed recently for sustainable energy and related conversion technologies. In this regard, structure-activity relationships based on several descriptors have already been proposed to rationally design electrocatalysts. However, the dynamic reconstruction of the surface structures and compositions of catalysts during electrocatalytic water oxidation, especially during the anodic oxygen evolution reaction (OER), complicate the streamlined prediction of the catalytic activity. With the achievements in operando and in situ techniques, it has been found that electrocatalysts undergo surface reconstruction to form the actual active species in situ accompanied with an increase in their oxidation state during OER in alkaline solution. Accordingly, a thorough understanding of the surface reconstruction process plays a critical role in establishing unambiguous structure-composition-property relationships in pursuit of high-efficiency electrocatalysts. However, several issues still need to be explored before high electrocatalytic activities can be realized, as follows: (1) the identification of initiators and pathways for surface reconstruction, (2) establishing the relationships between structure, composition, and electrocatalytic activity, and (3) the rational manipulation of in situ catalyst surface reconstruction. In this review, the recent progress in the surface reconstruction of transition metal-based OER catalysts including oxides, non-oxides, hydroxides and alloys is summarized, emphasizing the fundamental understanding of reconstruction behavior from the original precatalysts to the actual catalysts based on operando analysis and theoretical calculations. The state-of-the-art strategies to tailor the surface reconstruction such as substituting/doping with metals, introducing anions, incorporating oxygen vacancies, tuning morphologies and exploiting plasmonic/thermal/photothermal effects are then introduced. Notably, comprehensive operando/in situ characterization together with computational calculations are responsible for unveiling the improvement mechanism for OER. By delivering the progress, strategies, insights, techniques, and perspectives, this review will provide a comprehensive understanding of the surface reconstruction in transition metal-based OER catalysts and future guidelines for their rational development.

Comprehensive Understandings into Complete Reconstruction of Precatalysts: Synthesis, Applications, and Characterizations

Reconstruction induced by external environment (such as applied voltage bias and test electrolytes) changes catalyst component and catalytic behaviors. Investigations of complete reconstruction in energy conversion recently receive intensive attention, which promote the targeted design of top-performance materials with maximum component utilization and good stability. However, the advantages of complete reconstruction, its design strategies, and extensive applications have not achieved the profound understandings and summaries it deserves. Here, this review systematically summarizes several important advances in complete reconstruction for the first time, which includes 1) fundamental understandings of complete reconstruction, the characteristics and advantages of completely reconstructed catalysts, and their design principles, 2) types of reconstruction-involved precatalysts for oxygen evolution reaction catalysis in wide pH solution, and origins of limited reconstruction degree as well as design strategies/principles toward complete reconstruction, 3) complete reconstruction for novel material synthesis and other electrocatalysis fields, and 4) advanced in situ/operando or multiangle/level characterization techniques to capture the dynamic reconstruction processes and real catalytic contributors. Finally, the existing major challenges and unexplored/unsolved issues on studying the reconstruction chemistry are summarized, and an outlook for the further development of complete reconstruction is briefly proposed. This review will arouse the attention on complete reconstruction materials and their applications in diverse fields.

The Controllable Reconstruction of Bi-MOFs for Electrochemical CO2 Reduction through Electrolyte and Potential Mediation

Monitoring and controlling the reconstruction of materials under working conditions is crucial for the precise identification of active sites, elucidation of reaction mechanisms, and rational design of advanced catalysts. Herein, a Bi-based metal-organic framework (Bi-MOF) for electrochemical CO₂ reduction is selected as a case study. In situ Raman spectra combined with ex situ electron microscopy reveal that the intricate reconstruction of the Bi-MOF can be controlled using two steps: 1) electrolyte-mediated dissociation and conversion of Bi-MOF to Bi₂ O₂ CO₃ , and 2) potential-mediated reduction of Bi₂ O₂ CO₃ to Bi. The intentionally reconstructed Bi catalyst exhibits excellent activity, selectivity, and durability for formate production, and the unsaturated surface Bi atoms formed during reconstruction become the active sites. This work emphasizes the significant impact of pre-catalyst reconstruction under working conditions and provides insight into the design of highly active and stable electrocatalysts through the regulation of these processes.

Atomic-level engineering of two-dimensional electrocatalysts for CO2 reduction

Carbon dioxide (CO₂) from the excessive consumption of fossil fuels has exhibited a huge threat to the planet's ecosystem. Electrocatalytic CO₂ reduction into value-added chemicals has been regarded as a promising strategy in CO₂ utilization and needs the development of advanced electrocatalysts for lowering the activation energy and enhancing selectivity in CO₂ reduction. Two-dimensional (2D) materials, benefiting from their unique geometrical structures, have been extensively studied in the electrocatalytic CO₂ reduction reaction (CO₂RR). In this review, we systematically overview atomic-level engineering strategies in 2D electrocatalysts for the CO₂RR, including thickness control, elemental doping, vacancy engineering, heterostructure construction, and single-atom loading. Meanwhile, we analyze the relationship between structures and activity in electrocatalysis, and present the future challenges and opportunities in the electrocatalytic CO₂RR, and we hope that this review will offer helpful guidance for developing electrocatalysts for the CO₂RR.

Towards the Large-Scale Electrochemical Reduction of Carbon Dioxide

The severe increase in the CO2 concentration is a causative factor of global warming, which accelerates the destruction of ecosystems. The massive utilization of CO2 for value-added chemical production is a key to commercialization to guarantee both economic feasibility and negative carbon emission. Although the electrochemical reduction of CO2 is one of the most promising technologies, there are remaining challenges for large-scale production. Herein, an overview of these limitations is provided in terms of devices, processes, and catalysts. Further, the economic feasibility of the technology is described in terms of individual processes such as reactions and separation. Additionally, for the practical implementation of the electrochemical CO2 conversion technology, stable electrocatalytic performances need to be addressed in terms of current density, Faradaic efficiency, and overpotential. Hence, the present review also covers the known degradation behaviors and mechanisms of electrocatalysts and electrodes during electrolysis. Furthermore, strategic approaches for overcoming the stability issues are introduced based on recent reports from various research areas involved in the electrocatalytic conversion.