Scallion-Inspired Graphene Scaffold Enabled High Rate Lithium Metal Battery

Engineering High-Performance Li Metal Batteries through Dual-Gradient Porous Cu-CuZn Host

Porous copper (Cu) current collectors show promise in stabilizing Li metal anodes (LMAs). However, insufficient lithiophilicity of pure Cu and limited porosity in three-dimensional (3D) porous Cu structures led to an inefficient Li-Cu composite preparation and poor electrochemical performance of Li-Cu composite anodes. Herein, we propose a porous Cu-CuZn (DG-CCZ) host for Li composite anodes to tackle these issues. This architecture features a pore size distribution and lithiophilic-lithiophobic characteristics designed in a gradient distribution from the inside to the outside of the anode structure. This dual-gradient porous Cu-CuZn exhibits exceptional capillary wettability to molten Li and provides a high porosity of up to 66.05%. This design promotes preferential Li deposition in the interior of the porous structure during battery operation, effectively inhibiting Li dendrite formation. Consequently, all cell systems achieve significantly improved cycling stability, including Li half-cells, Li-Li symmetric cells, and Li-LFP full cells. When paired synergistically with the double-coated LiFePO4 cathode, the pouch cell configured with multiple electrodes demonstrates an impressive discharge capacity of 159.3 mAh g-1 at 1C. We believe this study can inspire the design of future 3D Li anodes with enhanced Li utilization efficiency and facilitate the development of future high-energy Li metal batteries.

In situ fluoro-oxygen codoped graphene layer for high-performance lithium metal anode

Because traditional lithium-ion batteries have been unable to meet the energy density requirements of various emerging fields, lithium-metal batteries (LMBs), known for their high energy density, are considered promising next-generation energy storage batteries. However, a series of problems, including low coulombic efficiency and low safety caused by dendrites, limit the application of lithium metal batteries. Herein, fluoro-oxygen codoped graphene (FGO) was used to modify the copper current collector (FGO@Cu). FGO-coated current collector provides more even nucleation sites to reduce the local effective current density. FGO is partly reduced during cycling and helps form stable LiF-rich SEI. Moreover, graphene's oxygen and fluorine functional groups reconstruct the current density distribution, promoting uniform lithium plating. The FGO@Cu current collector demonstrates superior properties than commercial Cu foil. The FGO@Cu delivers a 97% high CE for over 250 cycles at 1 mA cm-2. The FGO@Cu symmetrical battery cycled at 1 mA cm-2 for over 650 h. LiFePO4 fuel cell with a lithium-plated FGO@Cu collector as an anode exhibits superior cycling stability.

High Rate and Low-Temperature Stable Lithium Metal Batteries Enabled by Lithiophilic 3D Cu-CuSn Porous Framework

Lithium (Li) metal is regarded as the "Holy Grail" of anodes for high-energy rechargeable lithium batteries by virtue of its ultrahigh theoretical specific capacity and the lowest redox potential. However, the Li dendrite impedes the practical application of Li metal anodes. Herein, lithiophilic three-dimensional Cu-CuSn porous framework (3D Cu-CuSn) was fabricated by a vapor phase dealloying strategy via the difference in saturated vapor pressure between different metals and the Kirkendall effect. CuSn alloy sites were converted into LiSn alloy sites through the molten Li infusion method, and composite Li metal anodes (3D Cu-LiSn-Li) are achieved. Alloyed tin, as the bridge between the porous copper substrate and metallic Li, plays a critical role in optimizing Li nucleation and enhancing the fast lithium migration kinetics. This work demonstrates that lithiophilic binary copper alloys are an effective way to achieve room-temperature high rate performance and satisfied low-temperature cycling stability for Li metal batteries.

Self-Purifying Primary Solvation Sheath Enables Stable Electrode-Electrolyte Interfaces for Nickel-Rich Cathodes

Herein, we optimize the primary solvation sheath to investigate the fundamental correlation between battery performance and electrode-electrolyte interfacial properties through electrolyte solvation chemistry. Experimental and theoretical analyses reveal that the primary solvation sheath with a self-purifying feature can "positively" scavenge both the HF and PF5 (hydrolysis of ion-paired LiPF6), stabilize the PF6 anion-derived electrode-electrolyte interfaces, and thus boost the cycling performances. Being attributed with these superiorities, the NCM811//Li Li metal battery (LMB) with the electrolyte containing the optimized solvation sheath delivers 99.9% capacity retention at 2.5 C after 250 cycles. To circumvent the impact of excess Li content of Li metal on the performance of NCM811 cathode, the as-fabricated NCM811//graphite Li ion battery (LIB) also delivers a high-capacity retention of 90.1% from the 5th to the 100th cycle at 1 C. This work sheds light on the strong ability of the primary solvation sheath to regulate cathode interfacial properties.

Ultrasmooth and Dense Lithium Deposition Toward High-Performance Lithium-Metal Batteries

Lithium (Li)-metal batteries (LMBs) with stable solid electrolyte interphase (SEI) and dendrite-free formation have great potential in next-generation energy storage devices. Here, vertically aligned 3D Cu₂ S nanosheet arrays are fabricated on the surface of commercial Cu foils, which in situ generate ultrathin Cu nanosheet arrays to reduce local current density and Li₂ S layers on the surfaces to work as an excellent artificial SEI. It is found that Li presents a 3D-to-planar deposition model, and Li₂ S layers are reversibly movable between the 3D nanosheet surface and 2D planar surface of Li during long-term cycling. This enables ultrasmooth and dense Li deposition at 1 mA cm^-2 , presenting an average thickness of ≈53.0 µm at 10 mAh cm^-2 , which is close to the theoretical Li foil thickness and is highly reversible at different cycles. Thus, 1150 stable cycles with high Coulombic efficiency (CE, 99.1%) at ether-based electrolytes and 300 stable cycles with high CE (98.8%) at carbonate electrolytes are realized in half-cell with a capacity of 1 mAh cm^-2 at 1 mA cm^-2 . When coupled with commercial cathodes (LiFePO₄ or LiNi_0.8 Co_0.1 Mn_0.1 O₂ ), the full cells present substantially enhanced cyclability under high cathode loading, limited (or zero) Li excess, and lean electrolyte conditions, even at -20 °C.

Prestrain Programmable 4D Printing of Nanoceramic Composites with Bioinspired Microstructure

Four-dimensional (4D) printing enables programmable, predictable, and precise shape change of responsive materials to achieve desirable behaviors beyond conventional three-dimensional (3D) printing. However, applying 4D printing to ceramics remains challenging due to their intrinsic brittleness and inadequate stimuli-responsive ability. Here, this work proposes a conceptional combination of bioinspired microstructure design and a programmable prestrain approach for 4D printing of nanoceramics. To overcome the flexibility limitation, the bioinspired concentric cylinder structure in the struts of 3D printed lattices are replicated to develop origami nanoceramic composites with high inorganic content (95 wt%). Furthermore, 4D printing is achieved by applying a programmed prestrain to the printed lattices, enabling the desired deformation when the prestrain is released. Due to the bioinspired concentric cylinder microstructures, the printed flexible nanoceramic composites exhibit superior mechanical performance and anisotropic thermal management capability. Further, by introducing oxygen vacancies to the ceramic nanosheets, conductive nanoceramic composites are prepared with a unique sensing capability for various sensing applications. Hence, this research breaks through the limitation of ceramics in 4D printing and achieves high-performance shape morphing materials for applications under extreme conditions, such as space exploration and high-temperature systems.

Pomegranate-Inspired Graphene Parcel Enables High-Performance Dendrite-Free Lithium Metal Anodes

Uncontrolled lithium dendrites seriously hinder the commercialization of lithium metal batteries in comparison to the durable lithium-ion batteries. Herein, inspired by squashy pomegranate structure, a novel loading strategy of metallic lithium (Li) is introduced to construct dendrite-free Li metal anodes through porous reduced graphene oxide/Au (PRGO/Au) composite microrods (MRs) as unique storage parcels. The abundant internal voids and robust host structure are capable of achieving high mass loading of Li metal and effectively alleviating the conceivable volume change during cycling, accompanied by the preferential selective plating/stripping of Li inside the graphene-based MRs with the embedded Au nanonuclei. As a result, the obtained PRGO/Au-Li anodes deliver a long-lifespan stable cycling up to 600 h with a high specific capacity of ≈2140 mA h g^-1 and voltage hysteresis as low as 20 mV in the absence of dendrites. The assembled full cells exhibit excellent rate capability and cycling stability. This work provides an alternative strategy to construct advanced high-energy-density lithium batteries via the unique 1D bioinspired graphene-based packaging strategy.

Anion Concentration Gradient-Assisted Construction of a Solid-Electrolyte Interphase for a Stable Zinc Metal Anode at High Rates

Coulombic efficiency (CE) and cycle life of metal anodes (lithium, sodium, zinc) are limited by dendritic growth and side reactions in rechargeable metal batteries. Here, we proposed a concept for constructing an anion concentration gradient (ACG)-assisted solid-electrolyte interphase (SEI) for ultrahigh ionic conductivity on metal anodes, in which the SEI layer is fabricated through an in situ chemical reaction of the sulfonic acid polymer and zinc (Zn) metal. Owing to the driving force of the sulfonate concentration gradient and high bulky sulfonate concentration, a promoted Zn²⁺ ionic conductivity and inhibited anion diffusion in the SEI layer are realized, resulting in a significant suppression of dendrite growth and side reaction. The presence of ACG-SEI on the Zn metal enables stable Zn plating/stripping over 2000 h at a high current density of 20 mA cm^-2 and a capacity of 5 mAh cm^-2 in Zn/Zn symmetric cells, and moreover an improved cycling stability is also observed in Zn/MnO₂ full cells and Zn/AC supercapacitors. The SEI layer containing anion concentration gradients for stable cycling of a metal anode sheds a new light on the fundamental understanding of cation plating/stripping on metal electrodes and technical advances of rechargeable metal batteries with remarkable performance under practical conditions.

Thermally Conductive AlN-Network Shield for Separators to Achieve Dendrite-Free Plating and Fast Li-Ion Transport toward Durable and High-Rate Lithium-Metal Anodes

Lithium-metal anodes suffer from inadequate rate and cycling performances for practical application mainly due to the harmful dendrite growth, especially at high currents. Herein a facile construction of the porous and robust network with thermally conductive AlN nanowires onto the commercial polypropylene separator by convenient vacuum filtration is reported. The so-constructed AlN-network shield provides a uniform thermal distribution to realize homogeneous Li deposition, super electrolyte-philic channels to enhance Li-ion transport, and also a physical barrier to resist dendrite piercing as the last fence. Consequently, the symmetric Li|Li cell presents an ultralong lifetime over 8000 h (20 mA cm^-2 , 3 mAh cm^-2 ) and over 1000 h even at an unprecedented high rate (80 mA cm^-2 , 80 mAh cm^-2 ), which is far surpassing the corresponding performances reported to date. The corresponding Li|LiFePO₄ cell delivers a high specific capacity of 84.3 mAh g^-1 at 10 C. This study demonstrates an efficient approach with great application potential toward durable and high-power Li-metal batteries and even beyond.

Bamboo Weaving Inspired Design of a Carbonaceous Electrode with Exceptionally High Volumetric Capacity

A highly densified electrode material is desirable to achieve large volumetric capacity. However, pores acting as ion transport channels are critical for high utilization of active material. Achieving a balance between high volume density and pore utilization remains a challenge particularly for hollow materials. Herein, capillary force is employed to convert hollow fibers to a bamboo-weaving-like flexible electrode (BWFE), in which the shrinkage of hollow space results in high compactness of the electrode. The volume of the electrode can be decreased by 96% without sacrificing the gravimetric capacity. Importantly, the conductivity of BWFE after thermal treatment can reach up to 50,500 S/m which exceeds that for most other carbon materials. Detailed mechanical analysis reveals that, due to the strong interaction between nanoribbons, Young's modulus of the electrode increases by 105 times. After SnO₂ active materials is impregnated, the BWFE/SnO₂ electrode exhibits an exceptionally ultrahigh volumetric capacity of 2000 mAh/cm³.

Identifying the positive role of lithium hydride in stabilizing Li metal anodes

Lithium hydride has been widely identified as the major component of the solid-electrolyte interphase of Li metal batteries (LMBs), but is often regarded as being detrimental to the stabilization of LMBs. Here, we identify the positive and important role of LiH in promoting fast diffusion of Li ions by building a unique three-dimensional (3D) Li metal anode composed of LiMg alloys uniformly confined into graphene-supported LiH nanoparticles. The built-in electric field at the interface between LiH with high Li ion conductivity and LiMg alloys effectively boosts Li diffusion kinetics toward favorable Li plating into lithiophilic LiMg alloys through the surface of LiH. Therefore, the diffusion coefficient of Li ions of the thus-formed 3D structured Li metal anode is 10 times higher than the identical anode without the presence of LiH, and it exhibits a long cycle life of over 1200 hours at 3 mA cm^-2 under 5 mA hour cm^-2.