From Nano to Macro: Thinking Bigger in Nanoparticle Assembly

Hierarchical Self-Assembly of Water-Soluble Fullerene Derivatives into Supramolecular Hydrogels

Controlling the self-assembly of nanoparticle building blocks into macroscale soft matter structures is an open question and of fundamental importance to fields as diverse as nanomedicine and next-generation energy storage. Within the vast library of nanoparticles, the fullerenes-a family of quasi-spherical carbon allotropes-are not explored beyond the most common, C60. Herein, a facile one-pot method is demonstrated for functionalizing fullerenes of different sizes (C60, C70, C84, and C90-92), yielding derivatives that self-assemble in aqueous solution into supramolecular hydrogels with distinct hierarchical structures. It is shown that the mechanical properties of these resultant structures vary drastically depending on the starting material. This work opens new avenues in the search for control of macroscale soft matter structures through tuning of nanoscale building blocks.

Oriented Linear Self-Assembly of Colloidal Nanocrystals through Regioselective Formation of Hydrogen-Bonded Supramolecular Bridges

The linear assembly of nanocrystals (NCs) with orientational order presents a significant challenge in the field of colloidal assembly. This study presents an efficient strategy for assembling oleic acid (OAH)-capped, faceted rare earth NCs─such as nanorods, nanoplates, and nanodumbbells─into flexible chain-like superstructures. Remarkably, these NC chains exhibit a high degree of particle orientation even with an interparticle distance reaching up to 15 nm. Central to this oriented assembly method is the facet-selective adsorption of low-molecular-weight polyethylene glycol (PEG), such as PEG-400 (Mn = 400), onto specific facets of NCs. This regioselectivity is achieved by exploiting the lower binding affinity of OAH ligands on the (100) facets of rare earth NCs, enabling facet-specific ligand displacement and subsequent PEG attachment. By adjusting the solvent polarity, the linear assembly of NCs is induced by the solvophobic effect, which simultaneously promotes the formation of hydrogen-bonded PEG supramolecular bridges. These supramolecular bridges effectively connect NCs and exhibit sufficient robustness to maintain the structural integrity of the chains, despite the large interparticle spacing. Notably, even when coassembling different types of NCs, the resulting multicomponent chains still feature highly selective facet-to-facet connections. This work not only introduces a versatile method for fabricating well-aligned linear superstructures but also provides valuable insights into the fundamental principles governing the facet-selective assembly of NCs in solution.

Fabrication of Enzyme-Responsive Prodrug Self-Assembly Based on Fluazinam for Reducing Toxicity to Aquatic Organisms

Prodrug-based nanodrug delivery systems were drug formulations by covalently conjugating drugs with inversely polar groups via a cleavable bond to self-assemble into nanoparticles for efficient drug delivery. To improve the utilization efficiency of fluazinam (FZN), enzyme-responsive prodrugs were prepared by conjugating FZN with different alkyl aliphatic acids through a nucleophilic substitution reaction and subsequently self-assembled into nanoparticles (FZNP NPs) without using any harmful adjuvant. The obtained FZNP NPs exhibited excellent efficacies against Sclerotinia sclerotiorum as a result of improved physicochemical properties, including low surface tension, high retention, and enhanced photostability. The LC50 values of FZNP NPs toward zebrafish were 3-8 times that of FZN, which illustrated that the FZNP NPs reduced the detriments of FZN to the aquatic organisms while retaining good biological activity. Therefore, prodrug self-assembly technology would offer a potential method for improving the utilization efficiency of pesticides and lowering the risks to the ecological environment.

Scalable Synthesis of Dodecanethiol-Capped Bismuth Nanoparticles by a Solvent-Free Solid-State Grinding Method for Reduction of 4-Nitrophenol to 4-Aminophenol

Thiol-capped metal nanoparticles have two constituents: an inorganic metal and an organic molecule as a shell. Both characters are inbuilt in the structure of the metal thiolate. Herein, we have investigated bismuth dodecanethiolate as a precursor for the synthesis of dodecanethiol-capped bismuth nanoparticles (Bi NPs) by a solid-state grinding method. By using sodium borohydride and bismuth dodecanethiolate, crystalline bismuth nanoparticles are synthesized in a solvent-free environment at room temperature (24 ± 4 °C). Bi NPs are tested for catalytic activity by reducing 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) with an excess of NaBH4. Dodecanethiol-capped bismuth nanoparticles exhibit an efficient reduction of 4-NP to 4-AP within 12 min. Additionally, these nanoparticles remain catalytically active for up to three cycles.

Nanoparticle Self-Assembly: From Design Principles to Complex Matter to Functional Materials

The creation of matter with varying degrees of complexities and desired functions is one of the ultimate targets of self-assembly. The ability to regulate the complex interactions between the individual components is essential in achieving this target. In this direction, the initial success of controlling the pathways and final thermodynamic states of a self-assembly process is promising. Despite the progress made in the field, there has been a growing interest in pushing the limits of self-assembly processes. The main inception of this interest is that the intended self-assembled state, with varying complexities, may not be "at equilibrium (or at global minimum)", rendering free energy minimization unsuitable to form the desired product. Thus, we believe that a thorough understanding of the design principles as well as the ability to predict the outcome of a self-assembly process is essential to form a collection of the next generation of complex matter. The present review highlights the potent role of finely tuned interparticle interactions in nanomaterials to achieve the preferred self-assembled structures with the desired properties. We believe that bringing the design and prediction to nanoparticle self-assembly processes will have a similar effect as retrosynthesis had on the logic of chemical synthesis. Along with the guiding principles, the review gives a summary of the different types of products created from nanoparticle assemblies and the functional properties emerging from them. Finally, we highlight the reasonable expectations from the field and the challenges lying ahead in the creation of complex and evolvable matter.

Perspective and Prospects for Ordered Functional Materials

Many functional materials are approaching their performance limits due to inherent trade-offs between essential physical properties. Such trade-offs can be overcome by engineering a material that has an ordered arrangement of structural units, including constituent components/phases, grains, and domains. By rationally manipulating the ordering with abundant structural units at multiple length scales, the structural ordering opens up unprecedented opportunities to create transformative functional materials, as amplified properties or disruptive functionalities can be realized. In this perspective article, a brief overview of recent advances in the emerging ordered functional materials across catalytic, thermoelectric, and magnetic materials regarding the fabrication, structure, and property is presented. Then the possibility of applying this structural ordering strategy to highly efficient neuromorphic computing devices and durable battery materials is discussed. Finally, remaining scientific challenges are highlighted, and the prospects for ordered functional materials are made. This perspective aims to draw the attention of the scientific community to the emerging ordered functional materials and trigger intense studies on this topic.

Quantitatively controlled electrophoretic deposition of nanocrystal films from non-aqueous suspensions

This study presents a novel method to correlate the mass and charge transfer kinetics during the electrophoretic deposition of nanocrystal films by using a purpose-built double quartz crystal microbalance combined with simultaneous current-measurement. Our data support a multistep process for film formation: generation of charged nanocrystal flux, charge transfer at the electrode, and polarization of neutral nanocrystals near the electrode surface. The polarized particles are then subject to dielectrophoretic forces that reduce diffusion away from the interface, generating a sufficiently high neutral particle concentration at the interface to form a film. The correlation of mass and charge transfer enables quantification of the nanocrystal charge, the fraction of charged nanocrystals, and the initial sticking coefficient of the particles. These quantities permit calculation of the film thickness, providing a theoretical basis for using concentration and voltage as process parameters to grow films of targeted thicknesses.

Aero-manufacture of nanobulges for an in-place anticoronaviral on air filters

The interest in removing contagious viruses from indoor air using ventilation and filtration systems is increasing rapidly because people spend most of the day indoors. The development of an effective platform to regenerate the antiviral function of air filters during use and safe abrogation of used filters containing infectious viruses is a challenging task, because an on-demand safe-by-design manufacture system is essential for in-place antiviral coatings, but it has been rarely investigated. With these considerations, an electrically operable dispenser was prepared for decorating continuous ultrafine Fe-Zn, Fe-Ag, or Fe-Cu particles (<5 nm) onto SiO₂ nanobeads (ca. 130 nm) to form nanobulges (i.e., nanoroughness for engaging coronavirus spikes) in the aerosol state for 3 min direct deposition on the air filter surfaces. The resulting nanobulges were exposed to human coronaviruses (HCoV; surrogates of SARS-CoV-2) to assess antiviral function. The results were compared with similar-sized individual Zn, Ag, and Cu particles. The nanobulges exhibited comparable antiviral activity to Zn, Ag, and Cu particles while retaining biosafety in both in vitro and in vivo models because of the significantly smaller metallic fractions. This suggests that the bimetallic bulge structures generate reactive oxygen species and Fenton-mediated hydroxyl radicals for inactivating HCoV.

Nanocrystal phononics

Colloidal nanocrystals are successfully used as nanoscale building blocks for creating hierarchical solids with structures that range from amorphous networks to sophisticated periodic superlattices. Recently, it has been observed that these superlattices exhibit collective vibrations, which stem from the correlated motion of the nanocrystals, with their surface-bound ligands acting as molecular linkers. In this Perspective, we describe the work so far on collective vibrations in nanocrystal solids and their as-of-yet untapped potential for phononic applications. With the ability to engineer vibrations in the hypersonic regime through the choice of nanocrystal and linker composition, as well as by controlling their size, shape and chemical interactions, such superstructures offer new opportunities for phononic crystals, acoustic metamaterials and optomechanical systems.

Eco-friendly Approach for Creation of Resonant Silicon Nanoparticle Colloids

The commercial application of Mie-resonant nanophotonic technologies currently used in various laboratory studies, from biosensing to quantum optics, appears to be challenging. Development of colloidal-based fabrication approaches is a solution to face the issue. In our research, we studied the fabrication of resonant Si nanoparticle (NP) arrays on a surface with controlled wettability. First, we use nanosecond (ns) laser ablation in water and subsequent density gradient separation to obtain colloids of resonant spherical crystalline silicon NPs with a low polydispersity index. Then, the same industrial ns laser is applied to create a wetting gradient on the steel substrate to initiate a self-assembly of the NPs deposited by drop casting. Thus, we use a single commercial ns laser for producing both the NPs and the hydrophilic wetting gradient. We apply an easily operating size separation technique and only non-toxic media. This research contributes to the large-scale fabrication of various optical devices based on resonant high-refractive index nanostructures by ecologically friendly self-assembly techniques.

Plasmonic/magnetic nanoarchitectures: From controllable design to biosensing and bioelectronic interfaces

Controllable design of the nanocrystal-assembled plasmonic/magnetic nanoarchitectures (P/MNAs) inspires abundant methodologies to enhance light-matter interactions and control magnetic-induced effects by means of fine-tuning the morphology and ordered packing of noble metallic or magnetic building blocks. The burgeoning development of multifunctional nanoarchitectures has opened up broad range of interdisciplinary applications including biosensing, in vitro diagnostic devices, point-of-care (POC) platforms, and soft bioelectronics. By taking advantage of their customizability and efficient conjugation with capping biomolecules, various nanoarchitectures have been integrated into high-performance biosensors with remarkable sensitivity and versatility, enabling key features that combined multiplexed detection, ease-of-use and miniaturization. In this review, we provide an overview of the representative developments of nanoarchitectures that being built by plasmonic and magnetic nanoparticles over recent decades. The design principles and key mechanisms for signal amplification and quantitative sensitivity have been explored. We highlight the structure-function programmability and prospects of addressing the main limitations for conventional biosensing strategies in terms of accurate selectivity, sensitivity, throughput, and optoelectronic integration. State-of-the-art strategies to achieve affordable and field-deployable POC devices for early multiplexed detection of infectious diseases such as COVID-19 has been covered in this review. Finally, we discuss the urgent yet challenging issues in nanoarchitectures design and related biosensing application, such as large-scale fabrication and integration with portable devices, and provide perspectives and suggestions on developing smart biosensors that connecting the materials science and biomedical engineering for personal health monitoring.

Reversible assembly of nanoparticles: theory, strategies and computational simulations

The significant advances in synthesis and functionalization have enabled the preparation of high-quality nanoparticles that have found a plethora of successful applications. The unique physicochemical properties of nanoparticles can be manipulated through the control of size, shape, composition, and surface chemistry, but their technological application possibilities can be further expanded by exploiting the properties that emerge from their assembly. The ability to control the assembly of nanoparticles not only is required for many real technological applications, but allows the combination of the intrinsic properties of nanoparticles and opens the way to the exploitation of their complex interplay, giving access to collective properties. Significant advances and knowledge gained over the past few decades on nanoparticle assembly have made it possible to implement a growing number of strategies for reversible assembly of nanoparticles. In addition to being of interest for basic studies, such advances further broaden the range of applications and the possibility of developing innovative devices using nanoparticles. This review focuses on the reversible assembly of nanoparticles and includes the theoretical aspects related to the concept of reversibility, an up-to-date assessment of the experimental approaches applied to this field and the advanced computational schemes that offer key insights into the assembly mechanisms. We aim to provide readers with a comprehensive guide to address the challenges in assembling reversible nanoparticles and promote their applications.

Macroscopic Gradient Ordered α-Fe/Pr2Fe14B Nanocomposites with Ultrahigh Energy Density

Nanoparticle self-assembly enables the generation of complex ordered nanostructures with enhanced properties or new functionalities. However, the ordering is often limited to the micrometer scale with chemical strategies due to the relative weak supramolecular interactions that govern the self-assembly process. Here a physical strategy via temperature-gradient-assisted self-assembly is reported to create three-dimensional (3D) macroscopic ordered nanocomposites with different gradient variations in grain size, constituent content, and crystal orientation. The resulting α-Fe/Pr₂Fe₁₄B ordered nanostructure with reverse gradients in both the grain size and α-Fe content exhibits a record-high energy density of about 25 MGOe for isotropic α-Fe/Pr₂Fe₁₄B systems, approximately 130% higher than that of its disordered counterpart. Both experiments and micromagnetic simulations demonstrate that creating ordered nanostructures is an alternative approach to develop high-performance permanent-magnet materials. Our findings make a significant step toward creating 3D macroscopic ordered nanostructures and will stimulate the development of ordered nanomaterials.