Bismuth Vacancy-Induced Efficient CO2 Photoreduction in BiOCl Directly from Natural Air: A Progressive Step toward Photosynthesis in Nature

The synergistic effect of Cl doping and Bi coupling to promote the carrier separation of BiOBr for efficient photocatalytic nitrogen reduction

Photocatalytic nitrogen reduction reaction (NRR) is a sustainable process for ammonia synthesis under mild conditions. However, photocatalytic NRR activity and are generally limited by inefficient carrier separation and transfer. Therefore, parallel engineering of bulk phase doping and surface coupling is critical to achieving the goal of efficient NRR. In this study, Cl doped BiOBr nanosheet assemblies (BiOBr/Cl) were constructed in delicately designed deep eutectic solvents (DESs), combined with ionothermal methods at low temperatures and Bi3+ exsolution reduction strategy at high temperatures. The unique liquid state and reducibility of DESs induce the reduction of Bi3+ and the in situ coupling of Bi quantum dots at the surface of BiOBr/Cl nanosheets along with the construction of Bi-BiOBr/Cl nanosheet assemblies. The experimental results show that Cl doping could reduce the exciton dissociation energy and promote its dissociation to free carriers. Bi quantum dots could form tightly coupled Schottky junction with BiOBr/Cl enabling the efficient and unidirectional transmission of photogenerated electrons from BiOBr/Cl to metal Bi. The formed electron deficient region at Schottky interface promotes the adsorption and activation of N2. The hierarchical structure of Bi-BiOBr/Cl nanosheet assembly benefits to providing more N2 adsorption active sites. The DFT calculation shows that the accumulation of high concentration of active hydrogen in Bi-BiOBr/Cl leads to a significant decrease of energy barrier of the first step hydrogenation of N2. Bi-BiOBr/Clis more inclined to adsorb nitrogen for NRR in comparison with H* for hydrogen production. The synergistic effect of Cl doping and Bi coupling result in a high NRR activity of Bi-BiOBr/Cl photocatalyst of 6.67 mmol·g-1·h-1, which was 11.3 times higher than that of initial BiOBr. This study provides a promising strategy for designing highly active NRR photocatalysts with high efficiency carrier dissociation and transport.

Active site-exposed Bi2WO6@BiOCl heterostructures for photocatalytic hydrogenation of nitroaromatic compounds

Constructing heterostructured photocatalysts with highly exposed active sites proves to be an efficient strategy to improve the photocatalytic performance of bismuth-based photocatalysts. In this work, active site-exposed Bi2WO6@BiOCl (BWO@BOC) heterostructure composites based on two bismuth-based materials were fabricated by an in situ growth method for improving the photocatalytic hydrogenation of 4-aniline (4-NA) to p-phenylenediamine (PPD). BWO@BOC exhibited enhanced photoactivity for 4-NA hydrogenation compared to pure BWO and BOC. The optimal BWO@BOC composites displayed the highest conversion rate of 4-NA to PPD up to 99.3% within 12 min, with an apparent reaction rate constant of 0.414 min-1, which is 3.3 times that of pure BOC. The photoactivity enhancement is mainly ascribed to the construction of a tight Z-scheme heterostructure with improved light harvesting properties and charge carrier transport efficiency, which were revealed by optical and photoelectrochemical characterization, respectively. Furthermore, the products of the hydrogenation process were monitored by in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) to gain a better insight into the 4-NA hydrogenation mechanism.

A surface reconstruction route for increasingly improved photocatalytic H2O2 production using Sr2Bi3Ta2O11Cl

Photocatalytic hydrogen peroxide (H2O2) generation is attractive for the chemical industry and energy production. However, photocatalysts generally deteriorate significantly during use to limit their application. Here we present highly active Sr2Bi3Ta2O11Cl single-crystal nanoplates for conversion of O2 to H2O2 using ambient air with a production rate of ∼3 mmol h-1 g-1 (maximum 17.5% photon conversion). Importantly, Sr2Bi3Ta2O11Cl is not only stable during 30 days of H2O2 production but also gets consistently activated to increase the H2O2 yield by >244%, unlike any other catalyst for H2O2 production. Multi-pronged characterization confirms that the synergistic increase in activity originates from in situ surface reconstruction by oxygen-deficient vacancy associate formation that improves (i) surface oxygen adsorption, (ii) sunlight harvesting, and (iii) charge-transfer from the low-valent metal atoms surrounding oxygen vacancies to reactants. The study establishes the prospects of rational defect engineering for realizing non-degrading photocatalysts for realistic H2O2 production.

M/BiOCl-(M = Pt, Pd, and Au) Boosted Selective Photocatalytic CO2 Reduction to C2 Hydrocarbons via *CHO Intermediate Manipulation

Selective CO2 photoreduction to C2 hydrocarbons is significant but limited by the inadequate adsorption strength of the reaction intermediates and low efficiency of proton transfer. Herein, an ameliorative *CO adsorption and H2O activation strategy is realized via decorating bismuth oxychloride (BiOCl) nanostructures with different metal (Pt, Pd, and Au) species. Experimental and theoretical calculation results reveal that distinct *CO binding energies and *H acquisition abilities of the metal cocatalysts mediate the CO2 reduction activity and hydrocarbon selectivity. The relatively moderate *CO adsorption and *H supply over Pd/BiOCl endows it with the lowest free energy to generate *CHO, leading to its highest activity of hydrocarbon production. Specifically, the Pt cocatalyst can efficiently participate in H2O dissociation to deliver more *H for facilitating the protonation of the *CHO and *CHOH, thereby favoring CH4 production with 76.51% selectivity. A lower *H supply over Pd/BiOCl and Au/BiOCl results in a large energy barrier for *CHO or *CHOH protonation and thus a more thermodynamically favored OC─CHO coupling pathway, which endows them with vastly increased C2 hydrocarbon selectivity of 81.21% and 92.81%, respectively. The understanding of efficient C2 hydrocarbon production in this study sheds light on how materials can be engineered for photocatalytic CO2 reduction.

Contact-electro-catalytic CO2 reduction from ambient air

Traditional catalytic techniques often encounter obstacles in the search for sustainable solutions for converting CO2 into value-added products because of their high energy consumption and expensive catalysts. Here, we introduce a contact-electro-catalysis approach for CO2 reduction reaction, achieving a CO Faradaic efficiency of 96.24%. The contact-electro-catalysis is driven by a triboelectric nanogenerator consisting of electrospun polyvinylidene fluoride loaded with single Cu atoms-anchored polymeric carbon nitride (Cu-PCN) catalysts and quaternized cellulose nanofibers (CNF). Mechanistic investigation reveals that the single Cu atoms on Cu-PCN can effectively enrich electrons during contact electrification, facilitating electron transfer upon their contact with CO2 adsorbed on quaternized CNF. Furthermore, the strong adsorption of CO2 on quaternized CNF allows efficient CO2 capture at low concentrations, thus enabling the CO2 reduction reaction in the ambient air. Compared to the state-of-the-art air-based CO2 reduction technologies, contact-electro-catalysis achieves a superior CO yield of 33 μmol g-1 h-1. This technique provides a solution for reducing airborne CO2 emissions while advancing chemical sustainability strategy.

Modulation of Photocatalytic CO2 Reduction by n-p Codoping Engineering of Single-Atom Catalysts

Transition metal (TM) single-atom catalysts (SACs) have been widely applied in photocatalytic CO2 reduction. In this work, n-p codoping engineering is introduced to account for the modulation of photocatalytic CO2 reduction on a two-dimensional (2D) bismuth-oxyhalide-based cathode by using first-principles calculation. n-p codoping is established via the Coulomb interactions between the negatively charged TM SACs and the positively charged Cl vacancy (VCl) in the dopant-defect pairs. Based on the formation energy of charged defects, neutral dopant-defect pairs for the Fe, Co, and Ni SACs (PTM0) and the -1e charge state of the Cu SAC-based pair (PCu-1) are stable. The electrostatic attraction of the n-p codoping strengthens the stability and solubility of TM SACs by neutralizing the oppositely charged VCl defect and TM dopant. The n-p codoping stabilizes the electron accumulation around the TM SACs. Accumulated electrons modify the d-orbital alignment and shift the d-band center toward the Fermi level, enhancing the reducing capacity of TM SACs based on the d-band theory. Besides the electrostatic attraction of the n-p codoping, the PCu-1 also accumulates additional electrons surrounding Cu SACs and forms a half-occupied dx2-y2 state, which further upshifts the d-band center and improves photocatalytic CO2 reduction. The metastability of Cl multivacancies limits the concentration of the n-p pairs with Cl multivacancies (PTM@nCl (n > 1)). Positively charged centers around the PTM@nCl (n > 1) hinders the CO2 reduction by shielding the charge transfer to the CO2 molecule.

Defect Engineering in Bi-Based Photo/Electrocatalysts for Nitrogen Reduction to Ammonia

Main group Bi-based materials have gained popularity as N2 reduction reaction (NRR) photo/electrocatalysts due to their ability to inhibit competitive H2 evolution reactions (HER) and the unique N2 adsorption activities. The introduction of defects in Bi-based catalysts represents a highly effective strategy for enhancing light absorption, promoting efficient separation of photogenerated carriers, optimizing the activity of free radicals, regulating electronic structure, and improving catalytic performance. In this review, we outline the various applications of state of the defect engineering in Bi-based catalysts and elucidate the impact of vacancies on NRR performance. In particular, the types of defects, methods of defects tailoring, advanced characterization techniques, as well as the Bi-based catalysts with abundant defects and their corresponding catalytic behavior in NRR were elucidated in detail. Finally, the main challenges and opportunities for future development of defective Bi-based NRR catalysts are discussed, which provides a comprehensive theoretical guidance for this field.

Enhancing photocatalytic CO2 reduction with TiO2-based materials: Strategies, mechanisms, challenges, and perspectives

The concentration of atmospheric CO2 has exceeded 400 ppm, surpassing its natural variability and raising concerns about uncontrollable shifts in the carbon cycle, leading to significant climate and environmental impacts. A promising method to balance carbon levels and mitigate atmospheric CO2 rise is through photocatalytic CO2 reduction. Titanium dioxide (TiO2), renowned for its affordability, stability, availability, and eco-friendliness, stands out as an exemplary catalyst in photocatalytic CO2 reduction. Various strategies have been proposed to modify TiO2 for photocatalytic CO2 reduction and improve catalytic activity and product selectivity. However, few studies have systematically summarized these strategies and analyzed their advantages, disadvantages, and current progress. Here, we comprehensively review recent advancements in TiO2 engineering, focusing on crystal engineering, interface design, and reactive site construction to enhance photocatalytic efficiency and product selectivity. We discuss how modifications in TiO2's optical characteristics, carrier migration, and active site design have led to varied and selective CO2 reduction products. These enhancements are thoroughly analyzed through experimental data and theoretical calculations. Additionally, we identify current challenges and suggest future research directions, emphasizing the role of TiO2-based materials in understanding photocatalytic CO2 reduction mechanisms and in designing effective catalysts. This review is expected to contribute to the global pursuit of carbon neutrality by providing foundational insights into the mechanisms of photocatalytic CO2 reduction with TiO2-based materials and guiding the development of efficient photocatalysts.

CO2 Photoreduction over Semiconducting 2D Materials with Supported Single Atoms: Recent Progress and Challenges

In the face of the growing energy crisis and environmental challenges, substantial efforts are now directed toward sustainable clean energy as a replacement for traditional fossil fuels. CO2 photoreduction into value-added chemicals and fuels is widely recognized as a promising approach to mitigate current energy and environmental concerns. Photocatalysts comprising single atoms (SAs) supported on two-dimensional (2D) semiconducting materials (SAs-2DSemi) have emerged as a novel frontier due to the combined merits of SA catalysts and 2D materials. In this study, we review advancements in metal SAs confined on 2DSemi substrates, categorized into four groups: (1) metal oxide-based, (2) g-C3N4-based, (3) emerging, and (4) hybridized 2DSemi, for photocatalytic CO2 conversion over the past few years. With a particular focus on highlighting the distinct advantages of SAs-2DSemi, we delve into the synthesis of state-of-the-art catalysts, their catalytic performances, and mechanistic elucidation facilitated by experimental characterizations and theoretical calculations. Following this, we outline the challenges in this field and offer perspectives on harnessing the potential of SAs-2DSemi as promising photocatalysts. This comprehensive review aims to provide valuable insights for the future development of 2D photocatalytic materials involving SAs for CO2 reduction.

Recent advances on bismuth oxyhalides for photocatalytic CO2 reduction

Photocatalytic conversion of CO2 into fuels such as CO, CH4, and CH3OH, is a promising approach for achieving carbon neutrality. Bismuth oxyhalides (BiOX, where X = Cl, Br, and I) are appropriate photocatalysts for this purpose due to the merits of visible-light-active, efficient charge separation, and easy-to-modify crystal structure and surface properties. For practical applications, multiple strategies have been proposed to develop high-efficiency BiOX-based photocatalysts. This review summarizes the development of different approaches to prepare BiOX-based photocatalysts for efficient CO2 reduction. In the review, the fundamentals of photocatalytic CO2 reduction are introduced. Then, several widely used modification methods for BiOX photocatalysts are systematacially discussed, including heterojunction construction, introducing oxygen vacancies (OVs), Bi-enrichment, heteroatom-doping, and morphology design. Finally, the challenges and prospects in the design of future BiOX-based photocatalysis for efficient CO2 reduction are examined.

Preparation of Novel Layered High Entropy Bismuth-Based Materials and their Photocatalytic Degradation Mechanism

We prepared BiOCl, BiO(ClBr), BiO(ClBrI), and BiO[ClBrI(CO3)0.5] materials using a simple coprecipitation method. It was found that adjusting the number of anions in the anion layer was conducive to adjusting the band structure of BiOX and could effectively promote the migration and separation of photogenerated carriers, thus improving the photocatalytic activity. We first selected methyl orange (MO) as the study pollutant and compared it with BiOCl, BiO(ClBr), and BiO(ClBrI). The first-order kinetic constants of MO degradation by BiO[ClBrI(CO3)0.5] increased by 90.3, 33.9, and 3.1 times, respectively. The photocatalytic degradation rate of methylene blue by BiO[ClBrI(CO3)0.5] was 89.5%, indicating the excellent photocatalytic performance of BiO[ClBrI(CO3)0.5]. The stability of BiO[ClBrI(CO3)0.5] was demonstrated through cyclic experiments and XRD analysis before and after the reaction. The photocatalytic degradation of MO by BiO[ClBrI(CO3)0.5] showed that h+ and 1O2 were the main active oxidizing species and •O2- was the secondary active substance. Overall, our work provides new ideas for the synthesis and degradation of organic pollutants by using two-dimensional anionic high-entropy materials.

Electron Localization-Triggered Proton Pumping Toward Cu Single Atoms for Electrochemical CO2 Methanation of Unprecedented Selectivity

Slow multi-proton coupled electron transfer kinetics and unexpected desorption of intermediates severely hinder the selectivity of CO2 methanation. In this work, a one-stone-two-bird strategy of pumping protons and improving adsorption configuration/capability enabled by electron localization is developed to be highly efficient for CH4 electrosynthesis over Cu single atoms anchored on bismuth vacancies of BiVO4 (Bi1-xVO4─Cu), with superior kinetic isotope effect and high CH4 Faraday efficiency (92%), far outperforming state-of-the-art electrocatalysts for CO2 methanation. Control experiments and theoretical calculations reveal that the bismuth vacancies (VBi) not only act as active sites for H2O dissociation but also induce electron transfer toward Cu single-atom sites. The VBi-induced electron localization pumps *H from VBi sites to Cu single atoms, significantly promoting the generation and stabilization of the pivotal intermediate (*CHO) for highly selective CH4 electrosynthesis. The metal vacancies as new initiators show enormous potential in the proton transfer-involved hydrogenative conversion processes.

Surface and interface engineering of BiOCl nanomaterials and their photocatalytic applications

BiOCl materials have received much attention because of their unique optical and electrical properties. Still, their unsatisfactory catalytic performance has been troubling researchers, limiting the application of BiOCl-based photocatalysts. Therefore, many researchers have studied the adjustment of BiOCl-based materials to enhance photocatalytic efficiency. This review focuses on surface and interface engineering strategies for boosting the photocatalytic performance of BiOCl-based nanomaterials, including forming oxygen vacancy defects, constructing metal/BiOCl, and the fabrication of semiconductor/BiOCl nanocomposites. The photocatalytic applications of the above composites are also concluded in photodegradation of aqueous pollutants, photocatalytic NO removal, photo-induced H2 production, and CO2 reduction. Special emphasis has been given to the modification methods of BiOCl and photocatalytic mechanisms to provide a more detailed understanding for researchers in the fields of energy conversion and materials sciences.

Synergistic Interplay of Dual-Active-Sites on Metallic Ni-MOFs Loaded with Pt for Thermal-Photocatalytic Conversion of Atmospheric CO2 under Infrared Light Irradiation

Infrared light driven photocatalytic reduction of atmospheric CO2 is challenging due to the ultralow concentration of CO2 (0.04 %) and the low energy of infrared light. Herein, we develop a metallic nickel-based metal-organic framework loaded with Pt (Pt/Ni-MOF), which shows excellent activity for thermal-photocatalytic conversion of atmospheric CO2 with H2 even under infrared light irradiation. The open Ni sites are beneficial to capture and activate atmospheric CO2 , while the photogenerated electrons dominate H2 dissociation on the Pt sites. Simultaneously, thermal energy results in spilling of the dissociated H2 to Ni sites, where the adsorbed CO2 is thermally reduced to CO and CH4 . The synergistic interplay of dual-active-sites renders Pt/Ni-MOF a record efficiency of 9.57 % at 940 nm for converting atmospheric CO2 , enables the procurement of CO2 to be independent of the emission sources, and improves the energy efficiency for trace CO2 conversion by eliminating the capture media regeneration and molecular CO2 release.

Dual Lewis Acid-Base Sites Regulate Silver-Copper Bimetallic Oxide Nanowires for Highly Selective Photoreduction of Carbon Dioxide to Methane

Highly selective photoreduction of CO2 to valuable hydrocarbons is of great importance to achieving a carbon-neutral society. Precisely manipulating the formation of the Metal1 ⋅⋅⋅C=O⋅⋅⋅Metal2 (M1 ⋅⋅⋅C=O⋅⋅⋅M2 ) intermediate on the photocatalyst interface is the most critical step for regulating selectivity, while still a significant challenge. Herein, inspired by the polar electronic structure feature of CO2 molecule, we propose a strategy whereby the Lewis acid-base dual sites confined in a bimetallic catalyst surface are conducive to forming a M1 ⋅⋅⋅C=O⋅⋅⋅M2 intermediate precisely, which can promote selectivity to hydrocarbon formation. Employing the Ag2 Cu2 O3 nanowires with abundant Cu⋅⋅⋅Ag Lewis acid-base dual sites on the preferred exposed {110} surface as a model catalyst, 100 % selectivity toward photoreduction of CO2 into CH4 has been achieved. Subsequent surface-quenching experiments and density functional theory (DFT) calculations verify that the Cu⋅⋅⋅Ag Lewis acid-base dual sites do play a vital role in regulating the M1 ⋅⋅⋅C=O⋅⋅⋅M2 intermediate formation that is considered to be prone to convert CO2 into hydrocarbons. This study reports a highly selective CO2 photocatalyst, which was designed on the basis of a newly proposed theory for precise regulation of reaction intermediates. Our findings will stimulate further research on dual-site catalyst design for CO2 reduction to hydrocarbons.

2D Piezoelectric BiVO4 Artificial Nanozyme with Adjustable Vanadium Vacancy for Ultrasound Enhanced Piezoelectric/Sonodynamic Therapy

Increasing the yield of reactive oxygen species (ROS) to enhance oxidative stress in cells is an eternal goal in cancer therapy. In this study, BiVO4 artificial nanozyme is developed with adjustable vanadium vacancy for ultrasound (US) enhanced piezoelectric/sonodynamic therapy. Under US excitation, the vanadium vacancy-rich BiVO4 nanosheets (abbreviated Vv -r BiVO4 NSs) facilitate the generation of a large number of electrons to improve the ROS yield. Meanwhile, the mechanical strain imposed by US irradiation makes the Vv -r BiVO4 NSs display a typical piezoelectric response, which tilts the conduction band to be more negative and the valance band more positive than the redox potentials of O2 /O2 •- and H2 O/·OH, boosting the efficiency of ROS generation. Both density functional theory calculations and experiments confirm that the introduction of cationic vacancy can improve the sonodynamic effect. As expected, Vv -r BiVO4 NSs have better peroxidase enzyme catalytic and glutathione depletion activities, resulting in increased intracellular oxidative stress. This triple amplification strategy of oxidative stress induced by US substantially inhibits the growth of cancer cells. The work may open an avenue to achieve a synergetic therapy by introducing cationic vacancy, broadening the biomedical use of piezoelectric materials.

High-Crystallinity BiOCl Nanosheets as Efficient Photocatalysts for Norfloxacin Antibiotic Degradation

Semiconductor photocatalysts are essential materials in the field of environmental remediation. Various photocatalysts have been developed to solve the contamination problem of norfloxacin in water pollution. Among them, a crucial ternary photocatalyst, BiOCl, has attracted extensive attention due to its unique layered structure. In this work, high-crystallinity BiOCl nanosheets were prepared using a one-step hydrothermal method. The obtained BiOCl nanosheets showed good photocatalytic degradation performance, and the degradation rate of highly toxic norfloxacin using BiOCl reached 84% within 180 min. The internal structure and surface chemical state of BiOCl were analyzed using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman, Fourier transform infrared spectroscopy (FTIR), UV-visible diffuse reflectance (UV-vis), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectra (XPS), and photoelectric techniques. The higher crystallinity of BiOCl closely aligned molecules with each other, which improved the separation efficiency of photogenerated charges and showed high degradation efficiency for norfloxacin antibiotics. Furthermore, the obtained BiOCl nanosheets possess decent photocatalytic stability and recyclability.

Co engineered CoP catalyst for photochemical CO2 reduction with accelerated electron transfer endowed by the space-charge region

Photocatalytic CO₂ reduction has been regarded as an ideal method to simulate photosynthesis for achieving carbon neutralization. However, poor charge transfer efficiency limits its development. Herein, an efficient Co/CoP@C catalyst was prepared with compact contact of Co and CoP layer by using MOF as precursor. At the interface of Co/CoP, the difference in functionality between the two phases may result in uneven distribution of electrons, thus forming a self-driven space-chare region. In this region, spontaneous electron transfer is guaranteed, thus facilitating the effective separation of photogenerated carriers as well as boosting the utilization of solar energy. Furthermore, the electron density of active site Co in CoP is increased and more active sites are exposed, which promotes the adsorption and activation of CO₂ molecules. Together with suitable redox potential, low energy barrier for *COOH formation and easy desorption of CO, the reduction rate of CO₂ catalyzed by Co/CoP@C is 4 times higher than that of CoP@C.

Near-Ultraviolet Light-Driven Photocathodic Activity for (001)-Oriented BiOCl Thin Films Synthesized by Mist Chemical Vapor Deposition

Semitransparent and homogeneous bismuth oxychloride (BiOCl) thin films with (001) preferred orientation were synthesized on polycrystalline Sn:In₂O₃-glass substrates by mist chemical vapor deposition. The films showed photocathodic activity even under near-ultraviolet light within the band gap due to the in-gap states induced by oxygen vacancies. Higher synthesis temperatures resulted in a significant increase of photocurrent density under ultraviolet light. While the longer lifetime of photocarriers led to an increase of internal quantum efficiency, the larger band-edge absorption significantly contributed to the higher external quantum efficiency.

Efficient Charge Transfer and Effective Active Sites in Lead-Free Halide Double Perovskite S-Scheme Heterojunctions for Photocatalytic H2 Evolution

The practical application of lead-free double perovskite Cs₂ AgBiBr₆ in photocatalytic H₂ evolution is still restricted due to the low activity and poor stability. The rational design of lead-free halide double perovskites heterojunctions with efficient charge transfer and effective active sites is a potential route to achieve the ideal prospect. Herein, in this work an S-scheme heterojunction of Cs₂ AgBiBr₆ with enriched Br-vacancies and WO₃ nanorods (V_Br -Cs₂ AgBiBr₆ /WO₃ ) obtaining excellent visible-light responsive photocatalytic H₂ evolution performance and durable stability is reported. The S-scheme heterojunction driven by the unaligned Fermi levels of these two semiconductors ensures the efficient charge transfer at the interface, and density functional theory calculations reveal the enriched Br vacancies on Cs₂ AgBiBr₆ (022) surfaces introduced by atom thermal vibration provide effective active sites for hydrogen evolution. The optimized V_Br -Cs₂ AgBiBr₆ /WO₃ S-scheme photocatalyst exhibits the photocatalytic hydrogen evolution rate of 364.89 µmol g^-1 h^-1 which is 4.9-fold of bare V_Br -Cs₂ AgBiBr₆ (74.44 µmol g^-1 h^-1 ) and presents long-term stability of 12 h continuous photocatalytic reaction. This work provides deep insights into the photocatalytic mechanism of V_Br -Cs₂ AgBiBr₆ /WO₃ S-scheme heterojunctions, which emerges a new strategy in the applications of perovskite-based photocatalysts.

Engineering interface structures for heterojunction photocatalysts

Solar photocatalysis is the most ideal solution to global energy concerns and environmental deterioration nowadays. The heterojunction combination has become one of the most successful and effective strategies to design and manufacture composite photocatalysts. Heterojunction structures are widely documented to markedly improve the photocatalytic behavior of materials by enhancing the separation and transfer of photogenerated charges, widening the light absorption range, and broadening redox potentials, which are attributed to the presence of both build-in electric fields at the interface of two different materials and the complementarity between different electron structures. So far, a large number of heterojunction photocatalytic materials have been reported and applied for water splitting, reduction of carbon dioxide and nitrogen, environmental cleaning, etc. This review outlines the recent accomplishments in the design and modification of interface structures in heterojunction photocatalysts, aiming to provide some useful perspectives for future research in this field.

Identification of the Active Sites on Metallic MoO2-x Nano-Sea-Urchin for Atmospheric CO2 Photoreduction Under UV, Visible, and Near-Infrared Light Illumination

We report an oxygen vacancy (V_o )-rich metallic MoO_2-x nano-sea-urchin with partially occupied band, which exhibits super CO₂ (even directly from the air) photoreduction performance under UV, visible and near-infrared (NIR) light illumination. The V_o -rich MoO_2-x nano-sea-urchin displays a CH₄ evolution rate of 12.2 and 5.8 μmol g_catalyst ^-1  h^-1 under full spectrum and NIR light illumination in concentrated CO₂ , which is ca. 7- and 10-fold higher than the V_o -poor MoO_2-x , respectively. More interestingly, the as-developed V_o -rich MoO_2-x nano-sea-urchin can even reduce CO₂ directly from the air with a CO evolution rate of 6.5 μmol g_catalyst ^-1  h^-1 under NIR light illumination. Experiments together with theoretical calculations demonstrate that the oxygen vacancy in MoO_2-x can facilitate CO₂ adsorption/activation to generate *COOH as well as the subsequent protonation of *CO towards the formation of CH₄ because of the formation of a highly stable Mo-C-O-Mo intermediate.

CuO/NaNbO3 nanorod piezoelectric photocatalysts promoted tetracycline removal: a dynamic internal electric field

The piezoelectric electric field inside CuO/NaNbO3 nanorods promoted the separation of photoinduced carriers and inhibited being saturated by free carriers.

Boosted CO2 photoreduction performance on Ru-Ti3CN MXene-TiO2 photocatalyst synthesized by non-HF Lewis acidic etching method

Photocatalytic CO₂ reduction to produce value-added products is considered a promising solution to solve the global energy crisis and the greenhouse effect. In this study, Ti₃CN MXene was synthesized using a Lewis acidic etching method without the usage of toxic hydrofluoric acid (HF). Ti₃CN MXene was then used as a support for the in situ hydrothermal growth of TiO₂ and Ru nanoparticles. In the presence of 0.5 wt% Ru, Ru-Ti₃CN-TiO₂ shows CO and CH₄ production rates of 99.58 and 8.97 μmol/g, respectively, in 5 h under Xenon lamp irradiation, more than 20.5 and 9.3 times that of commercial P25. The enhancement in photocatalytic activity was attributed to the synergy between the in-situ growth of TiO₂ on Ti₃CN MXene and Ru nanoparticles. It was proven experimentally that Ti₃CN MXene can provide abundant pathways for electron transfer. The separation and transfer of the photo-induced charge were further increased with the help of Ru and Ti₃CN MXene, leaving more electrons to participate in the subsequent CO₂ reduction reaction. We believe that this work will encourage more attention to designing environment-friendly MXene-based photocatalysts for CO₂ photoreduction using the non-HF method.

Recent developments on bismuth oxyhalide-based functional nanomaterials for biomedical applications

Multifunctional bismuth oxyhalide (BiOX, X = F, Cl, Br, and I) nanomaterials have great potential advantages in medical diagnostic and therapeutic applications. Pure BiOX nanomaterials have some limitations such as...

Construction of unique heterojunction photoanodes through in situ quasi-epitaxial growth of FeVO4 on Fe2O3 nanorod arrays for enhanced photoelectrochemical performance

By enhancing the separation of photogenerated electron–hole pairs, reducing carrier recombination and the impedance of the interface electrolyte, the FeVO4–Fe2O3 photoanode exhibits obviously enhanced photoelectrochemical performance.