Single-Atom-Kernelled Nanocluster Catalyst

WS2 Moiré Superlattices Supporting Au Nanoclusters and Isolated Ru to Boost Hydrogen Production

Maximizing the catalytic activity of single-atom and nanocluster catalysts through the modulation of the interaction between these components and the corresponding supports is crucial but challenging. Herein, guided by theoretical calculations, a nanoporous bilayer WS2 Moiré superlattices (MSLs) supported Au nanoclusters (NCs) adjacent to Ru single atoms (SAs) (Ru1/Aun-2LWS2) is developed for alkaline hydrogen evolution reaction (HER) for the first time. Theoretical analysis suggests that the induced robust electronic metal-support interaction effect in Ru1/Aun-2LWS2 is prone to promote the charge redistribution among Ru SAs, Au NCs, and WS2 MSLs support, which is beneficial to reduce the energy barrier for water adsorption and thus promoting the subsequent H2 formation. As feedback, the well-designed Ru1/Aun-2LWS2 electrocatalyst exhibits outstanding HER performance with high activity (η10 = 19 mV), low Tafel slope (35 mV dec-1), and excellent long-term stability. Further, in situ, experimental studies reveal that the reconstruction of Ru SAs/NCs with S vacancies in Ru1/Aun-2LWS2 structure acts as the main catalytically active center, while high-valence Au NCs are responsible for activating and stabilizing Ru sites to prevent the dissolution and deactivation of active sites. This work offers guidelines for the rational design of high-performance atomic-scale electrocatalysts.

Concomitant Near-Infrared Photothermy and Photoluminescence of Rod-Shaped Au52(PET)32 and Au66(PET)38 Synthesized Concurrently

Gold nanoclusters exhibiting concomitant photothermy (PT) and photoluminescence (PL) under near-infrared (NIR) light irradiation are rarely reported, and some fundamental issues remain unresolved for such materials. Herein, we concurrently synthesized two novel rod-shaped Au nanoclusters, Au52(PET)32 and Au66(PET)38 (PET = 2-phenylethanethiolate), and precisely revealed that their kernels were 4 × 4 × 6 and 5 × 4 × 6 face-centered cubic (fcc) structures, respectively, based on the numbers of Au layers in the [100], [010], and [001] directions. Following the structural growth mode from Au52(PET)32 to Au66(PET)38, we predicted six more novel nanoclusters. The concurrent synthesis provides rational comparison of the two nanoclusters on the stability, absorption, emission and photothermy, and reveals the aspect ratio-related properties. An interesting finding is that the two nanoclusters exhibit concomitant PT and PL under 785 nm light irradiation, and the PT and PL are in balance, which was explained by the qualitative evaluation of the radiative and non-radiative rates. The ligand effects on PT and PL were also investigated.

An insight, at the atomic level, into the structure and catalytic properties of the isomers of the Cu22 cluster

The study of structural isomerism in copper nanoclusters has been relatively limited compared to that in gold and silver nanoclusters. In this work, we present the controlled synthesis and structures of two isomeric copper nanoclusters, denoted as Cu22-1 and Cu22-2, whose compositions were determined to be Cu22(SePh)10(Se)6(P(Ph-4F)3)8 through single-crystal X-ray diffraction (SCXRD). The structural isomerism of Cu22-1 and Cu22-2 arises from the different arrangements of a few Cu(SeR)(PR3) motifs on the surface structure. These subtle changes in the surface structure also influence the distortion of the core and the spatial arrangement of the clusters, and affect the electronic structure. Furthermore, due to their distinct structures, Cu22-1 and Cu22-2 exhibit different catalytic properties in the copper-catalyzed [3 + 2] azide-alkyne cycloaddition (CuAAC). Notably, Cu22-1 demonstrates efficient catalytic activity for photoinduced AAC, achieving a yield of 90% within 1 hour. This research contributes to the understanding of structural isomerism in copper nanoclusters and offers insights into the structure-function relationship in these systems.

Controlled Sequential Doping of Metal Nanocluster

Atomically precise doping of metal nanoclusters provides excellent opportunities not only for subtly tailoring their properties but also for in-depth understanding of composition (structure)-property correlation of metal nanoclusters and has attracted increasing interest partly due to its significance for fundamental research and practical applications. Although single and multiple metal atom doping of metal nanoclusters (NCs) has been achieved, sequential single-to-multiple metal atom doping is still a big challenge and has not yet been reported. Herein, by introducing a second ligand, a novel multistep synthesis method was developed, controlled sequential single-to-multiple metal atom doping was successfully achieved for the first time, and three doped NCs Au25Cd1(p-MBT)17(PPh3)2, Au18Cd2(p-MBT)14(PPh3)2, and [Au19Cd3(p-MBT)18]- (p-MBTH: para-methylbenzenethiol) were obtained, including two novel NCs that were precisely characterized via mass spectrometry, single-crystal X-ray crystallography, and so forth. Furthermore, sequential doping-induced evolutions in the atomic and crystallographic structures and optical and catalytic properties of NCs were revealed.

Self-assembled copper nanoclusters used to mimic peroxidase for glucose detection

A sensing system for glucose was established based on a self-assembled copper nanoclusters (Cu NCs)-based nano-enzyme and glucose oxidase (GOD). The assembled copper nanosheets (Cu NSs) were prepared in a one-step method using 2,3,4,5,6-pentafluorothiophenol (PFTP) as a reducing agent and protecting ligand. Cu NSs could be used to mimic the enzyme horseradish peroxidase. Cu NSs were endowed with excellent enzymatic catalytic activity in the oxidation of o-phenyldiamine (OPD) in the presence of H2O2. The latter could be generated in the aerobic oxidation of glucose catalyzed by GOD. Therefore, a detection method for glucose was constructed based on a Cu NSs-OPD-GOD catalytic system. This proposed sensing platform showed a standard linear range from 10 μM to 5 mM towards glucose, and the limit of detection was 5.5 μM. Finally, practical application of a sensor based on the Cu NSs nano-enzyme was verified in three sugared beverages as real samples. Our data reveal that the prepared Cu NSs could mimic peroxidase and be applied to a mixed catalytic system with GOD for glucose detection.

Copper Doping Boosts Electrocatalytic CO2 Reduction of Atomically Precise Gold Nanoclusters

Unraveling the atomistic synergistic effects of nanoalloys on the electrocatalytic CO2 reduction reaction (eCO2RR), especially in the presence of copper, is of paramount importance. However, this endeavor encounters significant challenges due to the lack of the crystallographically determined atomic-level structure of appropriate monometallic and bimetallic analogues. Herein, we report a one-pot synthesis and structure characterization of a AuCu nanoalloy cluster catalyst, [Au15Cu4(DPPM)6Cl4(C≡CR)1]2+ (denoted as Au15Cu4). Single-crystal X-ray diffraction analysis reveals that Au15Cu4 comprises two interpenetrating incomplete, centered icosahedra (Au9Cu2 and Au8Cu3) and is protected by six DPPM, four halide, and one alkynyl ligand. The Au15Cu4 cluster and its closest monometal structural analogue, [Au18(DPPM)6Br4]2+ (denoted as Au18), as model systems, enable the elucidation of the atomistic synergistic effects of Au and Cu on eCO2RR. The results reveal that Au15Cu4 is an excellent eCO2RR catalyst in a gas diffusion electrode-based membrane electrode assembly (MEA) cell, exhibiting a high CO Faradaic efficiency (FECO) of >90%, and this efficiency is substantially higher than that of the undoped Au18 (FECO: 60% at -3.75 V). Au15Cu4 exhibits an industrial-level CO partial current density of up to -413 mA/cm2 at -3.75 V with the gas CO2-fed MEA, which is 2-fold higher than that of Au18. The density functional theory (DFT) calculations demonstrate that the synergistic effects are induced by Cu doping, where the exposed pair of AuCu dual sites was suggested for launching the eCO2RR process. Besides, DFT simulations reveal that these special dual sites synergistically coordinate a moderate shift in the d-state, thus enhancing its overall catalytic performance.

Nanocluster Surface Microenvironment Modulates Electrocatalytic CO2 Reduction

The catalytic activity and product selectivity of the electrochemical CO2 reduction reaction (eCO2 RR) depend strongly on the local microenvironment of mass diffusion at the nanostructured catalyst and electrolyte interface. Achieving a molecular-level understanding of the electrocatalytic reaction requires the development of tunable metal-ligand interfacial structures with atomic precision, which is highly challenging. Here, the synthesis and molecular structure of a 25-atom silver nanocluster interfaced with an organic shell comprising 18 thiolate ligands are presented. The locally induced hydrophobicity by bulky alkyl functionality near the surface of the Ag25 cluster dramatically enhances the eCO2 RR activity (CO Faradaic efficiency, FECO : 90.3%) with higher CO partial current density (jCO ) in an H-cell compared to Ag25 cluster (FECO : 66.6%) with confined hydrophilicity, which modulates surface interactions with water and CO2 . Remarkably, the hydrophobic Ag25 cluster exhibits jCO as high as -240 mA cm-2 with FECO >90% at -3.4 V cell potential in a gas-fed membrane electrode assembly device. Furthermore, this cluster demonstrates stable eCO2 RR over 120 h. Operando surface-enhanced infrared absorption spectroscopy and theoretical simulations reveal how the ligands alter the neighboring water structure and *CO intermediates, impacting the intrinsic eCO2 RR activity, which provides atomistic mechanistic insights into the crucial role of confined hydrophobicity.

Body-Centered-Cubic-Kernelled Ag15Cu6 Nanocluster with Alkynyl Protection: Synthesis, Total Structure, and CO2 Electroreduction

While atomically monodisperse nanostructured materials are highly desirable to unravel the size- and structure-catalysis relationships, their controlled synthesis and the atomic-level structure determination pose challenges. Particularly, copper-containing atomically precise alloy nanoclusters are potential catalyst candidates for the electrochemical CO₂ reduction reaction (eCO₂RR) due to high abundance and tunable catalytic activity of copper. Herein, we report the synthesis and total structure of an alkynyl-protected 21-atom AgCu alloy nanocluster [Ag₁₅Cu₆(C≡CR)₁₈(DPPE)₂]^-, denoted as Ag₁₅Cu₆ (HC≡CR: 3,5-bis(trifluoromethyl)phenylacetylene; DPPE: 1,2-bis(diphenylphosphino)ethane). The single-crystal X-ray diffraction reveals that Ag₁₅Cu₆ consists of an Ag₁₁Cu₄ metal core exhibiting a body-centered cubic (bcc) structure, which is capped by 2 Cu atoms, 2 Ag₂DPPE motifs, and 18 alkynyl ligands. Interestingly, the Ag₁₅Cu₆ cluster exhibits excellent catalytic activity for eCO₂RR with a CO faradaic efficiency (FE_CO) of 91.3% at -0.81 V (vs the reversible hydrogen electrode, RHE), which is much higher than that (FE_CO: 48.5% at -0.89 V vs RHE) of Ag₉Cu₆ with bcc structure. Furthermore, Ag₁₅Cu₆ shows superior stability with no significant decay in the current density and FE_CO during a long-term operation of 145 h. Density functional theory calculations reveal that the de-ligated Ag₁₅Cu₆ cluster can expose more space at the pair of AgCu dual metals as the efficient active sites for CO formation.

Alloying and dealloying of Au18Cu32 nanoclusters at precise locations via controlling the electronegativity of substituent groups on thiol ligands

The doping site of metals in an alloy nanocluster plays a key role in determining the cluster properties. Herein, we found that alloying engineering was achieved by replacing Cu at specific positions in the second layer Cu₂₀ shell of the [Au18Cu32(SR-O)36]2- or [Au18Cu32(SR-F)36]3- (SR-O = -S-PhOMe; SR-F = -SC₆H₃^3,4F₂) nanocluster with Au to generate a core-shell [Au20.31Cu29.69(SR-O)36]2- protected by mercaptan ligands with electron-donating substituents, which could be stable obtained compared with the alloyed nanocluster with electron-withdrawing substituent ligands. Moreover, dealloying engineering was accomplished by an electron-withdrawing substituent ligand exchange strategy (i.e., [Au18Cu32(SR-F)36]2-). The abovementioned reaction was analyzed using single-crystal X-ray crystallography, electrospray ionization mass spectrometry, and X-ray photoelectron spectroscopy and monitored via time-dependent ultraviolet-visible absorption spectroscopy. This reversible and precise location of alloying and dealloying provides the possibility for studying the relationship between the structure and properties of nanoclusters at the atomic level.