Volumetric Nanocrystal Lattice Reconstruction through Dynamic Metal Complex Docking

Strategies for Achieving Ultra-Long ORR Durability-Rh Activates Interatomic Interactions in Alloys

The stability of platinum-based alloy catalysts is crucial for the future development of proton exchange membrane fuel cells, considering the potential dissolution of transition metals under complex operating conditions. Here, we report on a Rh-doped Pt3Co alloy that exhibits strong interatomic interactions, thereby enhancing the durability of fuel cells. The Rh-Pt3Co/C catalyst demonstrates exceptional catalytic activity for oxygen reduction reactions (ORR) (1.31 A mgPt -1 at 0.9 V vs. the reversible hydrogen electrode (RHE) and maintaining 92 % of its mass activity after 170,000 potential cycles). Long-term testing has shown direct inhibition of Co dissolution in Rh-Pt3Co/C. Furthermore, tests on proton exchange membrane fuel cells (PEMFC) have shown excellent performance and long-term durability with low Pt loading. After 50,000 cycles, there was no voltage loss at 0.8 A cm-2 for Rh-Pt3Co/C, while Pt3Co/C experienced a loss of 200 mV. Theoretical calculations suggest that introducing transition metal atoms through doping creates a stronger compressive strain, which in turn leads to increased catalytic activity. Additionally, Rh doping increases the energy barrier for Co diffusion in the bulk phase, while also raising the vacancy formation energy of the surface Pt. This ensures the long-term stability of the alloy over the course of the cycle.

Multicolor Long-Term Single-Particle Tracking Using 10 nm Upconverting Nanoparticles

Single-particle tracking (SPT) is a powerful technique to unveil molecular behaviors crucial to the understanding of many biological processes, but it is limited by factors such as probe photostability and spectral orthogonality. To overcome these limitations, we develop upconverting nanoparticles (UCNPs), which are photostable over several hours at the single-particle level, enabling long-term multicolor SPT. We investigate the brightness of core-shell UCNPs as a function of inert shell thickness to minimize particle size while maintaining sufficient signal for SPT. We explore different rare-earth dopants to optimize for the brightest probes and find that UCNPs doped with 2% Tm3+/30% Yb3+, 10% Er3+/90% Yb3+, and 15% Tm3+/85% Yb3+ represent the optimal probes for blue, green, and near-infrared emission, respectively. The multiplexed 10 nm probes enable three-color single-particle tracking on live HeLa cells for tens of minutes using a single, near-infrared excitation source. These photostable and multiplexed probes open new avenues for numerous biological applications.

Hydrothermal synthesis of ZnGa2O4 nanophosphors with high internal quantum efficiency for near-infrared pc-LEDs

NIR luminescent materials have garnered widespread attention because of their exceptional properties, with high tissue penetration, low absorption and high signal-to-noise ratio in the field of optical imaging. However, producing nanophosphors with high quantum yields of emitting infrared light with wavelengths above 1000 nm remains a significant challenge. Here, we prepared a nanoscale ZnGa2O4:xCr3+,yNi2+ phosphor with good luminescence performance in near-infrared emission, which was synthesized via a hydrothermal method and subsequent calcination process. By co-doping with Cr3+ and Ni2+, the ZnGa2O4 phosphor shows a strong broadband emission of 1100-1600 nm in the second near-infrared (NIR-II) region, owing to the energy transfer from Cr3+ to Ni2+ with an efficiency up to 90%. Meanwhile, a near-infrared phosphor-conversion LED (NIR pc-LED) device is fabricated based on the ZnGa2O4:0.8%Cr3+,0.4%Ni2+ nanophosphor, which has under 100 mA input current, an output power of 23.99 mW, and a photoelectric conversion efficiency of 7.53%, and can be effectively applied in imaging and non-destructive testing. Additionally, the intensity ratio of INi/ICr of ZnGa2O4:0.8% Cr3+,0.4%Ni2+ with its high sensitivity value of 4.21% K-1 at 453 K under 410 nm excitation, indicates its potential for thermometry application.

Preparation of rare earth-doped nano-fluorescent materials in the second near-infrared region and their application in biological imaging

Second near-infrared (NIR-II) fluorescence imaging (FLI) has gained widespread interest in the biomedical field because of its advantages of high sensitivity and high penetration depth. In particular, rare earth-doped nanoprobes (RENPs) have shown completely different physical and chemical properties from macroscopic substances owing to their unique size and structure. This paper reviews the synthesis methods and types of RENPs for NIR-II imaging, focusing on new methods to enhance the luminous intensity of RENPs and multi-band imaging and multi-mode imaging of RENPs in biological applications. This review also presents an overview of the challenges and future development prospects based on RENPs in NIR-II regional bioimaging.

An Extended NIR-II Superior Imaging Window from 1500 to 1900 nm for High-Resolution In Vivo Multiplexed Imaging Based on Lanthanide Nanocrystals

High-resolution in vivo optical multiplexing in second near-infrared window (NIR-II, 1000-1700 nm) is vital to biomedical research. Presently, limited by bio-tissue scattering, only luminescent probes located at NIR-IIb (1500-1700 nm) window can provide high-resolution in vivo multiplexed imaging. However, the number of available luminescent probes in this narrow NIR-IIb region is limited, which hampers the available multiplexed channels of in vivo imaging. To overcome the above challenges, through theoretical simulation we expanded the conventional NIR-IIb window to NIR-II long-wavelength (NIR-II-L, 1500-1900 nm) window on the basis of photon-scattering and water-absorption. We developed a series of novel lanthanide luminescent nanoprobes with emission wavelengths from 1852 nm to 2842 nm. NIR-II-L nanoprobes enabled high-resolution in vivo dynamic multiplexed imaging on blood vessels and intestines, and provided multi-channels imaging on lymph tubes, tumors and intestines. The proposed NIR-II-L probes without mutual interference are powerful tools for high-contrast in vivo multiplexed detection, which holds promise for revealing physiological process in living body.

Interface defects repair of core/shell quantum dots through halide ion penetration

The interface defects of core-shell colloidal quantum dots (QDs) affect their optoelectronic properties and charge transport characteristics. However, the limited available strategies pose challenges in the comprehensive control of these interface defects. Herein, we introduce a versatile strategy that effectively addresses both surface and interface defects in QDs through simple post-synthesis treatment. Through the combination of fine chemical etching methods and spectroscopic analysis, we have revealed that halogens can diffuse within the crystal structure at elevated temperatures, acting as "repairmen" to rectify oxidation and significantly reducing interface defects within the QDs. Under the guidance of this protocol, InP core/shell QDs were synthesized by a hydrofluoric acid-free method with a full width at half-maximum of 37.0 nm and an absolute quantum yield of 86%. To further underscore the generality of this strategy, we successfully applied it to CdSe core/shell QDs as well. These findings provide fundamental insights into interface defect engineering and contribute to the advancement of innovative solutions for semiconductor nanomaterials.

Lanthanide-Doped KMgF3 Upconversion Nanoparticles for Photon Avalanche Luminescence with Giant Nonlinearities

Lanthanide (Ln3+)-doped photon avalanche (PA) upconversion nanoparticles (UCNPs) have great prospects in many advanced technologies; however, realizing efficient PA luminescence in Ln3+-doped UCNPs remains challenging due to the deleterious surface and lattice quenching effect. Herein, we report a unique strategy based on the pyrolysis of KHF2 for the controlled synthesis of aliovalent Ln3+-doped KMgF3 UCNPs, which can effectively protect Ln3+ from luminescence quenching by surface and internal OH- defects and thereby boost upconversion luminescence. This enables us to realize efficient PA luminescence from Tm3+ at 802 nm in KMgF3: Tm3+ UCNPs upon 1064 nm excitation, with a giant nonlinearity of ∼27, a PA response time of 281 ms, and an excitation threshold of 16.6 kW cm-2. This work may open up a new avenue for exploring highly nonlinear PA luminescence through aliovalent Ln3+ doping and crystal lattice engineering toward diverse emerging applications.