Nanoparticles at Grain Boundaries Inhibit the Phase Transformation of Perovskite Membrane

Stabilization of Perovskite Solar Cells: Recent Developments and Future Perspectives

Exceptional power conversion efficiency (PCE) of 25.7% in perovskite solar cells (PSCs) has been achieved, which is comparable with their traditional rivals (Si-based solar cells). However, commercialization-worthy efficiency and long-term stability remain a challenge. In this regard, there are increasing studies focusing on the interface engineering in PSC devices to overcome their poor technical readiness. Herein, the roles of electrode materials and interfaces in PSCs are discussed in terms of their PCEs and perovskite stability. All the current knowledge on the factors responsible for the rapid intrinsic and external degradation of PSCs is presented. Then, the roles of carbonaceous materials as substitutes for noble metals are focused on, along with the recent research progress in carbon-based PSCs. Furthermore, a sub-category of PSCs, that is, flexible PSCs, is considered as a type of exceptional power source due to their high power-to-weight ratios and figures of merit for next-generation wearable electronics. Last, the future perspectives and directions for research in PSCs are discussed, with an emphasis on their commercialization.

Effects of Bi Substitution on the Cobalt-Free 60wt.%Ce0.9Pr0.1O2−δ-40wt.%Pr0.6Sr0.4Fe1−xBixO3−δ Oxygen Transport Membranes

The mixed ionic-electronic conducting (MIEC) oxygen transport membrane (OTM) can completely selectively penetrate oxygen theoretically and can be widely used in gas separation and oxygen-enriched combustion industries. In this paper, dual-phase MIEC OTMs doped with Bi are successfully prepared by a sol-gel method with high-temperature sintering, whose chemical formulas are 60wt.%Ce0.9Pr0.1O2−δ-40wt.%Pr0.6Sr0.4Fe1−xBixO3−δ (60CPO-40PSF1−xBxO, x = 0.01, 0.025, 0.05, 0.10, 0.15, 0.20). The dual-phase structure, element content, surface morphology, oxygen permeability, and stability are studied by XRD, EDXS, SEM, and self-built devices, respectively. The optimal Bi-doped component is 60wt.%Ce0.9Pr0.1O2−δ-40wt.%Pr0.6Sr0.4Fe0.99Bi0.01O3−δ, which can maintain 0.71 and 0.62 mL·min−1·cm−2 over 50 h under He and CO2 atmospheres, respectively. The oxygen permeation flux through these Bi-doped OTMs under air/CO2 gradient is 12.7% less than that under air/He gradient, which indicates that the Bi-doped OTMs have comparable oxygen permeability and excellent CO2 tolerance.

CO2-Tolerant Oxygen Permeation Membranes Containing Transition Metals as Sintering Aids with High Oxygen Permeability

Chemical doping of ceramic oxides may provide a possible route for realizing high-efficient oxygen transport membranes. Herein, we present a study of the previously unreported dual-phase mixed-conducting oxygen-permeable membranes with the compositions of 60 wt.% Ce0.85Pr0.1M0.05O2-δ-40 wt.%Pr0.6Sr0.4Fe0.8Al0.2O3-δ (M = Fe, Co, Ni, Cu) (CPM-PSFA) adding sintering aids, which is expected to not only improve the electronic conductivity of fluorite phase, but also reduce the sintering temperature and improve the sintering properties of the membranes. X-ray powder diffraction (XRD) results indicate that the CPM-PSFA contain only the fluorite and perovskite two phases, implying that they are successfully prepared with a modified Pechini method. Backscattered scanning electron microscopy (BSEM) results further confirm that two phases are evenly distributed, and the membranes are very dense after sintering at 1275 °C for 5 h, which is much lower than that (1450 °C, 5 h) of the composite 60 wt.%Ce0.9Pr0.1O2-δ-40 wt.%Pr0.6Sr0.4Fe0.8Al0.2O3-δ (CP-PSFA) without sintering aids. The results of oxygen permeability test demonstrate that the oxygen permeation flux through the CPCu-PSFA and CPCo-PSFA is higher than that of undoped CP-PSFA and can maintain stable oxygen permeability for a long time under pure CO2 operation condition. Our results imply that these composite membranes with high oxygen permeability and stability provide potential candidates for the application in oxygen separation, solid oxide fuel cell (SOFC), and oxy-fuel combustion based on carbon dioxide capture.

Ptychographic X-ray tomography reveals additive zoning in nanocomposite single crystals

Single crystals containing nanoparticles represent a unique class of nanocomposites whose properties are defined by both their compositions and the structural organization of the dispersed phase in the crystalline host. Yet, there is still a poor understanding of the relationship between the synthesis conditions and the structures of these materials. Here ptychographic X-ray computed tomography is used to visualize the three-dimensional structures of two nanocomposite crystals - single crystals of calcite occluding diblock copolymer worms and vesicles. This provides unique information about the distribution of the copolymer nano-objects within entire, micron-sized crystals with nanometer spatial resolution and reveals how occlusion is governed by factors including the supersaturation and calcium concentration. Both nanocomposite crystals are seen to exhibit zoning effects that are governed by the solution composition and interactions of the additives with specific steps on the crystal surface. Additionally, the size and shape of the occluded vesicles varies according to their location within the crystal, and therefore the solution composition at the time of occlusion. This work contributes to our understanding of the factors that govern nanoparticle occlusion within crystalline materials, where this will ultimately inform the design of next generation nanocomposite materials with specific structure/property relationships.

Microstructural and Interfacial Designs of Oxygen-Permeable Membranes for Oxygen Separation and Reaction-Separation Coupling

Mixed ionic-electronic conducting oxygen-permeable membranes can rapidly separate oxygen from air with 100% selectivity and low energy consumption. Combining reaction and separation in an oxygen-permeable membrane reactor significantly simplifies the technological scheme and reduces the process energy consumption. Recently, materials design and mechanism investigations have provided insight into the microstructural and interfacial effects. The microstructures of the membrane surfaces and bulk are closely related to the interfacial oxygen exchange kinetics and bulk diffusion kinetics. Therefore, the permeability and stability of oxygen-permeable membranes with a single-phase structure and a dual-phase structure can be adjusted through their microstructural and interfacial designs. Here, recent advances in the development of oxygen permeation models that provide a deep understanding of the microstructural and interfacial effects, and strategies to simultaneously improve the permeability and stability through microstructural and interfacial design are discussed in detail. Then, based on the developed high-performance membranes, highly effective membrane reactors for process intensification and new technology developments are highlighted. The new membrane reactors will trigger innovations in natural gas conversion, ammonia synthesis, and hydrogen-related clean energy technologies. Future opportunities and challenges in the development of oxygen-permeable membranes for oxygen separation and reaction-separation coupling are also explored.

Enhancing Oxygen Permeation via the Incorporation of Silver Inside Perovskite Oxide Membranes

As a possible novel cost-effective method for oxygen production from air separation, ion-conducting ceramic membranes are becoming a hot research topic due to their potentials in clean energy and environmental processes. Oxygen separation via these ion-conducting membranes is completed via the bulk diffusion and surface reactions with a typical example of perovskite oxide membranes. To improve the membrane performance, silver (Ag) deposition on the membrane surface as the catalyst is a good strategy. However, the conventional silver coating method has the problem of particle aggregation, which severely lowers the catalytic efficiency. In this work, the perovskite oxide La0.8Ca0.2Fe0.94O3−a (LCF) and silver (5% by mole) composite (LCFA) as the membrane starting material was synthesized using one-pot method via the wet complexation where the metal and silver elements were sourced from their respective nitrate salts. LCFA hollow fiber membrane was prepared and comparatively investigated for air separation together with pure LCF hollow fiber membrane. Operated from 800 to 950 °C under sweep gas mode, the pure LCF membrane displayed the fluxes from 0.04 to 0.54 mL min−1 cm−2. Compared to pure LCF, under similar operating conditions, the flux of LCFA membrane was improved by 160%.

The effect of Fe/Co ratio on the structure and oxygen permeability of Ca-containing composite membranes

60 wt%Ce_0.9Pr_0.1O_2−δ–40 wt%Pr_0.6Ca_0.4Fe_1−xCo_xO_3−δ composite were synthesized and found that the reduction of Fe/Co ratio improved the oxygen permeability (Jo₂) for x ≤ 0.6, while the reduction ratio had an adverse impact on the Jo₂ for x ≥ 0.8.

Perovskite Hollow Fibers with Precisely Controlled Cation Stoichiometry via One-Step Thermal Processing

The practical applications of perovskite hollow fibers (HFs) are limited by challenges in producing these easily, cheaply, and reliably. Here, a one-step thermal processing approach is reported for the efficient production of high performance perovskite HFs, with precise control over their cation stoichiometry. In contrast to traditional production methods, this approach directly uses earth-abundant raw chemicals in a single thermal process. This approach can control cation stoichiometry by avoiding interactions between the perovskites and polar solvents/nonsolvents, optimizes sintering, and results in high performance HFs. Furthermore, this method saves much time and energy (≈ 50%), therefore pollutant emissions are greatly reduced. One successful example is Ba0.5Sr0.5Co0.8Fe0.2O3-δ HFs, which are used in an oxygen-permeable membrane. This exhibits high oxygen permeation flux values that exceed desired commercial targets and compares favorably with previously reported oxygen-permeable membranes. Studies on other perovskites have produced similarly successful results. Overall, this approach could lead to energy efficient, solid-state devices for industrial application in energy and environmental fields.