Morphology and Phase Controlled Construction of Pt-Ni Nanostructures for Efficient Electrocatalysis

Interfacial Electronic Modulation of Dual-Monodispersed Pt-Ni3S2 as Efficacious Bi-Functional Electrocatalysts for Concurrent H2 Evolution and Methanol Selective Oxidation

Constructing the efficacious and applicable bi-functional electrocatalysts and establishing out the mechanisms of organic electro-oxidation by replacing anodic oxygen evolution reaction (OER) are critical to the development of electrochemically-driven technologies for efficient hydrogen production and avoid CO2 emission. Herein, the hetero-nanocrystals between monodispersed Pt (~ 2 nm) and Ni3S2 (~ 9.6 nm) are constructed as active electrocatalysts through interfacial electronic modulation, which exhibit superior bi-functional activities for methanol selective oxidation and H2 generation. The experimental and theoretical studies reveal that the asymmetrical charge distribution at Pt-Ni3S2 could be modulated by the electronic interaction at the interface of dual-monodispersed heterojunctions, which thus promote the adsorption/desorption of the chemical intermediates at the interface. As a result, the selective conversion from CH3OH to formate is accomplished at very low potentials (1.45 V) to attain 100 mA cm-2 with high electronic utilization rate (~ 98%) and without CO2 emission. Meanwhile, the Pt-Ni3S2 can simultaneously exhibit a broad potential window with outstanding stability and large current densities for hydrogen evolution reaction (HER) at the cathode. Further, the excellent bi-functional performance is also indicated in the coupled methanol oxidation reaction (MOR)//HER reactor by only requiring a cell voltage of 1.60 V to achieve a current density of 50 mA cm-2 with good reusability.

Bimetallic Pt-Hg Aerogels for Electrocatalytic Upgrading of Ethanol to Acetate

Electrochemical upgrading of ethanol to acetic acid provides a promising strategy to couple with the current hydrogen production from water electrolysis. This work reports the design of a series of bimetallic PtHg aerogels, where the PtHg aerogel exhibits a 10.5-times higher mass activity than that of commercial Pt/C toward ethanol oxidation. More impressively, the PtHg aerogel demonstrates nearly 100% selectivity toward the production of acetic acid. The operando infrared spectroscopic studies and nuclear magnetic resonance analysis verify the preferable C2 pathway mechanism during the reaction. This work opens an avenue for the electrochemical synthesis of acetic acid via ethanol electrolysis.

Manipulating morphology and composition in colloidal heterometallic nanopods and nanodendrites

Branched Pt nanoparticles represent an exciting class of nanomaterials with high surface areas suitable for applications in electrocatalysis. Introducing a second metal can enhance performance and reduce cost. External factors such as capping agents and temperature have been used to offer insights into nanopod formation and to encourage their kinetic evolution. More recently, nanodendrites have been reported, though synthesis has generally been empirical; making controlled variation of morphology while maintaining bimetallic composition an elusive target. We report the combination of Pt with Fe under a range of conditions, yielding individually bimetallic nanoparticles whose construction sheds new light on nanopod and/or nanodendrite formation. Fine control of metal precursor reduction through modulating capping agents, reagents, and temperature initially directs nanopod synthesis. Morphology control is retained while composition is then varied from Pt-rich to Pt-poor. Additionally, conditions are identified that promote the collision-based branching of nanopod arms. This allows synthesis to be redirected for the selective growth of compositionally controlled nanodendrites in predictable fashion.

Modulation in the d Band of Ir by Core-Shell Construction for Robust Water Splitting Electrocatalysts in Acid

The realization of commercialization of proton electrolyte membrane water splitting technology significantly depends on the anodic electrocatalyst working at a high potential and strong acidic conditions requiring superior oxygen evolution reaction activity and stability. In this work, we devise the construction of ultrasmall Pd@Ir core-shell nanoparticles (5 nm) with atomic layer Ir (3 atomic layers) on carbon nanotubes (Pd@Ir/CNT) as an exceptional bifunctional electrocatalyst in acidic water splitting. Due to the core-shell structure, strain generated at heterointerfaces leads to an upshifted d band center of Ir atoms contributing to a 62-fold better mass activity at 1.63 V vs RHE than commercial IrO₂; besides, the electronic hybridization suppresses the electrochemical dissolution of Ir; as a result, robust stability is also achieved. In hydrogen evolution reaction catalysis, Pd@Ir/CNT exhibits a 3.7 times higher mass activity than Pt/C. Furthermore, only 1.7 V is required to reach a water splitting current density of 100 mA cm^-2, 251 mV lower than that of Pt/C-IrO₂, indicating its superiority in acidic water splitting.

Shape-Controlled Synthesis of Platinum-Based Nanocrystals and Their Electrocatalytic Applications in Fuel Cells

To achieve environmentally benign energy conversion with the carbon neutrality target via electrochemical reactions, the innovation of electrocatalysts plays a vital role in the enablement of renewable resources. Nowadays, Pt-based nanocrystals (NCs) have been identified as one class of the most promising candidates to efficiently catalyze both the half-reactions in hydrogen- and hydrocarbon-based fuel cells. Here, we thoroughly discuss the key achievement in developing shape-controlled Pt and Pt-based NCs, and their electrochemical applications in fuel cells. We begin with a mechanistic discussion on how the morphology can be precisely controlled in a colloidal system, followed by highlighting the advanced development of shape-controlled Pt, Pt-alloy, Pt-based core@shell NCs, Pt-based nanocages, and Pt-based intermetallic compounds. We then select some case studies on models of typical reactions (oxygen reduction reaction at the cathode and small molecular oxidation reaction at the anode) that are enhanced by the shape-controlled Pt-based nanocatalysts. Finally, we provide an outlook on the potential challenges of shape-controlled nanocatalysts and envision their perspective with suggestions.

Catalytic Activity Maps for Alloy Nanoparticles

To enable rational design of alloy nanoparticle catalysts, we develop an approach to generate catalytic activity maps of alloy nanoparticles on a grid of particle size and composition. The catalytic activity maps are created by using a quaternary cluster expansion to explicitly predict adsorbate binding energies on alloy nanoparticles of varying shape, size, and atomic order while accounting for interactions among the adsorbates. This cluster expansion is used in kinetic Monte Carlo simulations to predict activated nanoparticle structures and turnover frequencies on all surface sites. We demonstrate our approach on Pt-Ni octahedral nanoparticle catalysts for the oxygen reduction reaction (ORR), revealing that the specific activity is predicted to be optimized at an edge length of larger than 5.5 nm and a composition of about Pt_0.85Ni_0.15 and the mass activity is predicted to be optimized at an edge length of 3.3-3.8 nm and a composition of about Pt_0.8Ni_0.2.

PtCuRu Nanoflowers with Ru-Rich Edge for Efficient Fuel-Cell Electrocatalysis

Enhancing the catalytic activity of Pt-based alloy by a rational structural design is the key to addressing the sluggish kinetics of direct alcohol fuel cells. Herein, a facile one-pot method is reported to synthesize PtCuRu nanoflowers (NFs). The synergetic effect among Pt, Cu, and Ru can lower the d-band center of Pt, regulate the morphology, generate Ru-rich edge, and allow the exposure of more high index facets. The optimized Pt_0.68 Cu_0.18 Ru_0.14 NFs exhibit outstanding electrocatalytic performances and excellent anti-poisoning abilities. The specific activities for the methanol oxidation reaction (MOR) (7.65 mA cm^-2 ) and ethanol oxidation reaction (EOR) (7.90 mA cm^-2 ) are 6.0 and 7.1 times higher than commercial Pt/C, respectively. The CO stripping experiment and the chronoamperometric (5000 s) demonstrate the superior anti-poisoning property and durability performance. Density functional theory calculations confirm that high metallization degree leads to the decrease of d-band center, the promotion of oxidation of CO, and improvement of the inherent activity and anti-poisoning ability. A Ru-rich edge exposes abundant high index facets to accelerate the reaction kinetics of rate-determining steps by decreasing the energy barrier for forming *HCOOH (MOR) and CC bond breaking (EOR).

Review of High Entropy Alloys Electrocatalysts for Hydrogen Evolution, Oxygen Evolution, and Oxygen Reduction Reaction

Recently, high-entropy alloys (HEAs) have been extensively investigated due to their unique structural design, superior stability, excellent functional feature and superior mechanical performance. However, most of the reported HEAs focus on studying the compositional design and microstructure and mechanical properties of materials. There are relatively few studies on electrochemical performance and theoretical studies of HEAs. In addition, the potential applications of HEAs as energy storage materials for electrocatalysts have attracted widely attention in the development and application aspects of electrocatalysis. It can be attributed to their high conductivity, excellent structural stability and superior electrocatalytic activities with small overpotential and abundant active sites, which is comparable to the commercial noble metal catalysts. In this review, firstly, we briefly discuss the concept and structure characteristics of high entropy alloys. Then, the research progress of high-entropy alloys as electrocatalysis are also summarized, including hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and oxygen reduction reaction (ORR), respectively. Finally, the future development trend of HEAs is also prospected for energy conversion fields.

Oleic acid/oleylamine ligand pair: a versatile combination in the synthesis of colloidal nanoparticles

A variety of colloidal chemical approaches has been developed in the last few decades for the controlled synthesis of nanostructured materials in either water or organic solvents. Besides the precursors, the solvents, reducing agents, and the choice of surfactants are crucial for tuning the composition, morphology and other properties of the resulting nanoparticles. The ligands employed include thiols, amines, carboxylic acids, phosphines and phosphine oxides. Generally, adding a single ligand to the reaction mixture is not always adequate to yield the desired features. In this review, we discuss in detail the role of the oleic acid/oleylamine ligand pair in the chemical synthesis of nanoparticles. The combined use of these ligands belonging to two different categories of molecules aims to control the size and shape of nanoparticles and prevent their aggregation, not only during their synthesis but also after their dispersion in a carrier solvent. We show how the different binding strengths of these two molecules and their distinct binding modes on specific facets affect the reaction kinetics toward the production of nanostructures with tailored characteristics. Additional functions, such as the reducing function, are also noted, especially for oleylamine. Sometimes, the carboxylic acid will react with the alkylamine to form an acid-base complex, which may serve as a binary capping agent and reductant; however, its reducing capacity may range from lower to much lower than that of oleylamine. The types of nanoparticles synthesized in the simultaneous presence of oleic acid and oleylamine and discussed herein include metal oxides, metal chalcogenides, metals, bimetallic structures, perovskites, upconversion particles and rare earth-based materials. Diverse morphologies, ranging from spherical nanoparticles to anisotropic, core-shell and hetero-structured configurations are presented. Finally, the relation between tuning the resulting surface and volume nanoparticle properties and the relevant applications is highlighted.

Salt-Templated Nanoarchitectonics of CoSe2-NC Nanosheets as an Efficient Bifunctional Oxygen Electrocatalyst for Water Splitting

Recently, the extensive research of efficient bifunctional electrocatalysts (oxygen evolution reaction (OER) and hydrogen evolution reaction (HER)) on water splitting has drawn increasing attention. Herein, a salt-template strategy is prepared to synthesize nitrogen-doped carbon nanosheets encapsulated with dispersed CoSe₂ nanoparticles (CoSe₂-NC NSs), while the thickness of CoSe₂-NC NSs is only about 3.6 nm. Profiting from the ultrathin morphology, large surface area, and promising electrical conductivity, the CoSe₂-NC NSs exhibited excellent electrocatalytic of 10 mA·cm⁻² current density at small overpotentials of 247 mV for OER and 75 mV for HER. Not only does the nitrogen-doped carbon matrix effectively avoid self-aggregation of CoSe₂ nanoparticles, but it also prevents the corrosion of CoSe₂ from electrolytes and shows favorable durability after long-term stability tests. Furthermore, an overall water-splitting system delivers a current density of 10 mA·cm⁻² at a voltage of 1.54 V with resultants being both the cathode and anode catalyst in alkaline solutions. This work provides a new way to synthesize efficient and nonprecious bifunctional electrocatalysts for water splitting.

Ni2+ -Directed Anisotropic Growth of PtCu Nested Skeleton Cubes Boosting Electroreduction of Oxygen

Structure-controlled Pt-based nanocrystals have the great potential to provide a flexible strategy for improving the catalysis of the oxygen reduction reaction (ORR). Here, a new synthetic approach is developed to tune the 3D structure of Pt-based alloys, and switch a synthetic reaction which produces solid PtCu octahedral stars (OSs) to produce PtCu nested skeleton cubes (NSCs) by simple addition of Ni(acac)₂ . In particular, Ni²⁺ -guided anisotropic growth is observed to generate the nested skeleton structure in PtCu NSCs. Ni²⁺ , though absent from the nanoalloys, not only endows faster Cu reduction kinetics but also acts as a structure-directing agent. Moreover, it is shown that acetic acid treatment of PtCu NSCs/C exposes Pt-rich surface with a fine-tuned Pt d-band center energy and the reduced Cu leaching, resulting in strikingly high activity and stability. Acid-treated PtCu NSCs/C shows a remarkable ORR mass activity of 5.13 A mg_Pt ^-1 , about 26 times higher than commercial Pt/C catalyst. This catalyst also exhibits excellent stability with a lower activity decay of 11.5% and the negligible variation in structure after 10 000 cycles.

Defect-Rich, Highly Porous PtAg Nanoflowers with Superior Anti-Poisoning Ability for Efficient Methanol Oxidation Reaction

The design of efficient and sustainable Pt-based catalysts is the key to the development of direct methanol fuel cells. However, most Pt-based catalysts still exhibit disadvantages including unsatisfied catalytic activity and serious CO poisoning in the methanol oxidation reaction (MOR). Herein, highly porous PtAg nanoflowers (NFs) with rich defects are synthesized by using liquid reduction combining chemical etching. It is demonstrated that the proportion of precursors determines the inhomogeneity of alloy elements, and the strong corrosiveness of nitric acid to silver leads to the eventual porous flower-like structure. Impressively, the optimal etched Pt₁ Ag₂ NFs have the mixed defects of surface steps, dislocations, and bulk holes, and their mass activity (1136 mA mg_Pt^-1 ) is 2.6 times higher than that of commercial Pt/C catalysts, while the ratio of forward and backward peak current density (I_f /I_b ) can reach 3.2, exhibiting an excellent anti-poisoning ability. Density functional theory calculations further verify their high anti-poison properties from both an adsorption and an oxidation perspective of CO intermediate. The introduction of Ag makes it easier for CO to be oxidized and removed. This study provides a facile approach to prepare rich defects and porous alloy with excellent MOR performance and superior anti-poisoning ability.

Controllable Synthesis of Platinum-Tin Intermetallic Nanoparticles with High Electrocatalytic Performance for Ethanol Oxidation

This article proposes a general approach for the preparation of intermetallic nanoparticles of Pt3Sn, PtSn, PtSn2, and PtSn4, triggered by hexamethyldisilazane (HMDS) in conjunction with SnCl2. The ethanol oxidation reaction...

α-calcium sulfate hemihydrate with a 3D hierarchical straw-sheaf morphology for use as a remove Pb2+ adsorbent

Novel three-dimensional hierarchical α-calcium sulfate hemihydrate with a straw-sheaf morphology (3D α-HH straw-sheaves) are synthesized successfully in glycerin aqueous solution by a simple one-pot method, using as an efficient adsorbent for Pb²⁺ removal from water. The 3D straw-sheaf morphology, that closely depends on the glycerin/water volume ratio (V_Gly/V_H2O), can be accurately fabricated only when V_Gly/V_H2O is not lower than 3/1. 3D α-HH straw-sheaves are generated via multistep-splitting growth coupled with self-assembly. The obtained 3D α-HH straw-sheaves are further used as an adsorbent to remove Pb²⁺ from water, exhibiting excellent Pb²⁺ removal performance with an equilibrium adsorption capacity of 79.19 mg_Pbg_α-HH^-1 and removal efficiency of 98.98%, that both higher than those of plate- and columnar-like α-HH. Moreover, the experimental adsorption data for the 3D α-HH straw-sheaves is well fitted with pseudo-second-order kinetic model, and the adsorption isotherm is in good agreement with Langmuir model. The Pb²⁺ adsorption mechanism is thought to be a chemical adsorption process enforced by chemical bonding and ion exchange. This work demonstrates that 3D α-HH straw-sheaves are highly promising in removing Pb²⁺ from wastewater, thereby broadening the research field for the practical application of gypsum-based materials.

Noble Metal-Based Multimetallic Nanoparticles for Electrocatalytic Applications

Noble metal-based multimetallic nanoparticles (NMMNs) have attracted great attention for their multifunctional and synergistic effects, which offer numerous catalytic applications. Combined experimental and theoretical studies have enabled formulation of various design principles for tuning the electrocatalytic performance through controlling size, composition, morphology, and crystal structure of the nanoparticles. Despite significant advancements in the field, the chemical synthesis of NMMNs with ideal characteristics for catalysis, including high activity, stability, product-selectivity, and scalability is still challenging. This review provides an overview on structure-based classification and the general synthesis of NMMN electrocatalysts. Furthermore, postsynthetic treatments, such as the removal of surfactants to optimize the activity, and utilization of NMMNs onto suitable support for practical electrocatalytic applications are highlighted. In the end, future direction and challenges associated with the electrocatalysis of NMMNs are covered.

Rich grain boundaries endow networked PdSn nanowires with superior catalytic properties for alcohol oxidation

Networked nanowire (NNW)-structured catalysts have attracted extensive attention due to their large surface area and structural stability, which mean that they have excellent catalytic activity and stability and can be used as anode reaction catalysts for use in direct alcohol fuel cells (DAFCs). Herein, a series of networked PdSn nanowires synthesized via a modified polyol strategy are used as efficient DAFCs anode reaction catalysts. The introduction of Sn plays an important role in the improvement of catalytic behavior, in which the existence of Sn promotes the oxidation of intermediates by providing abundant oxyphilic species. Moreover, the generated PdSn NNWs-3 with optimal content show rich grain boundaries and an even NNW structure, which provides more active sites to further improve catalytic performance, so it exhibits excellent activity toward alcohol oxidation. The mass activities of PdSn NNWs-3 toward the ethanol oxidation reaction (EOR) and the methanol oxidation reaction (MOR) are 8105.0 and 3099.5 mA mg_Pd^-1, which are 6.9 and 10.7 times higher than those of Pd/C, respectively. Compared with Pd/C, the PdSn NNWs also display enhanced stability towards the EOR and MOR. This work demonstrates that NNW nanocatalysts indeed exhibit excellent catalytic performance for alcohol oxidation reactions.

Mastering the surface strain of platinum catalysts for efficient electrocatalysis

Platinum (Pt) has found wide use as an electrocatalyst for sustainable energy conversion systems^1-3. The activity of Pt is controlled by its electronic structure (typically, the d-band centre), which depends sensitively on lattice strain^4,5. This dependence can be exploited for catalyst design^4,6-8, and the use of core-shell structures and elastic substrates has resulted in strain-engineered Pt catalysts with drastically improved electrocatalytic performances^7,9-13. However, it is challenging to map in detail the strain-activity correlations in Pt-catalysed conversions, which can involve a number of distinct processes, and to identify the optimal strain modification for specific reactions. Here we show that when ultrathin Pt shells are deposited on palladium-based nanocubes, expansion and shrinkage of the nanocubes through phosphorization and dephosphorization induces strain in the Pt(100) lattice that can be adjusted from -5.1 per cent to 5.9 per cent. We use this strain control to tune the electrocatalytic activity of the Pt shells over a wide range, finding that the strain-activity correlation for the methanol oxidation reaction and hydrogen evolution reaction follows an M-shaped curve and a volcano-shaped curve, respectively. We anticipate that our approach can be used to screen out lattice strain that will optimize the performance of Pt catalysts-and potentially other metal catalysts-for a wide range of reactions.

Bimetallic Nanocrystals: Structure, Controllable Synthesis and Applications in Catalysis, Energy and Sensing

In recent years, bimetallic nanocrystals have attracted great interest from many researchers. Bimetallic nanocrystals are expected to exhibit improved physical and chemical properties due to the synergistic effect between the two metals, not just a combination of two monometallic properties. More importantly, the properties of bimetallic nanocrystals are significantly affected by their morphology, structure, and atomic arrangement. Reasonable regulation of these parameters of nanocrystals can effectively control their properties and enhance their practicality in a given application. This review summarizes some recent research progress in the controlled synthesis of shape, composition and structure, as well as some important applications of bimetallic nanocrystals. We first give a brief introduction to the development of bimetals, followed by the architectural diversity of bimetallic nanocrystals. The most commonly used and typical synthesis methods are also summarized, and the possible morphologies under different conditions are also discussed. Finally, we discuss the composition-dependent and shape-dependent properties of bimetals in terms of highlighting applications such as catalysis, energy conversion, gas sensing and bio-detection applications.

Optimized oxygen reduction activity by tuning shell component in Pd@Pt-based core-shell electrocatalysts

Combining the interests of core-shell and alloy structures, herein we report the versatile co-reduction synthesis of Pd@Pt-based core-shell nanoparticles. The current strategy can effectively tune the component of shell, from isolated Pt to binary PtNi alloy, then ternary PtNi-M (M = Fe or Cu) alloy. Further, significant improvement of oxygen reduction reaction (ORR) activity is optimized by the change in shell component. Compared to Pd@Pt/C, Pd@PtNi/C catalyst presents the ORR-helpful mass activity of 1.29 A mg^-1_Pt. By incorporating a third metal (M) into shell layer, the optimized mass activity of Pd@PtNiFe/C and Pd@PtNiCu/C catalysts is 1.1 times and 1.4 times higher than that of Pd@PtNi/C, respectively. Meanwhile, the lower activity decays of 11.0% for Pd@PtNiFe/C and 10.6% for Pd@PtNiCu/C are obtained compared with that of Pd@PtNi/C (12.4%) after 5,000 cycles, respectively.

Rapid Electrochemical Screening of Phenylketonuria Maker Depending on Dehydrogenase Attached to the Pt-Doped Reduced Graphene Oxide Nanocomposites

Phenylketonuria (PKU) is a common disease associated with amino acid metabolism, and usually occurs in newborns. It can cause serious neurological diseases and even death. However, owing to inadequate-effective treatment, it can only be slowed by a low-phenylalanine (Phe) diet. In addition, PKU screening is essential for newborns in many countries. Therefore, rapid screening is crucial for preventing damage and meeting the large sample diagnosis demand. For confirmed patients, a convenient method to monitor their regular Phe levels is required. However, current clinical methods do not meet the rapid screening and convenient monitoring requirements. Herein, a rapid and facile electrochemical device based on platinum-doped reduced graphene oxide nanocomposites was developed to detect PKU biomarker-Phe. The results demonstrated that the developed electrode has great sensitivity, selectivity, and stability. The detection range was 0.0001 mM to 6 mM with a limit of detection of 0.01 μM. Therefore, this work offers a simple and rapid method for point-of-care PKU screening and daily monitoring.

Synthesis of the Platinum Nanoribbons Regulated by Fluorine and Applications in Electrocatalysis

Controlling the morphology of highly homogeneous nanoribbons is one of the main goals for synthesizing catalysts with excellent activity and durability. In this Communication, platinum (Pt) nanoribbons were synthesized by a one-pot method. We used ammonium fluoride (NH₄F) as the regulator, under 8 atm of hydrogen (H₂), to synthesize zigzag-shaped two-dimensional Pt nanoribbons. Benefiting from their unique morphology, the Pt nanoribbons display superior electrocatalytic activity and stability.

Electronic Structure Tuning of 2D Metal (Hydr)oxides Nanosheets for Electrocatalysis

2D metal (hydr)oxide nanosheets have captured increasing interest in electrocatalytic applications aroused by their high specific surface areas, enriched chemically active sites, tunable physiochemical properties, etc. In particular, the electrocatalytic reactivities of materials greatly rely on their surface electronic structures. Generally speaking, the electronic structures of catalysts can be well adjusted via controlling their morphologies, defects, and heterostructures. In this Review, the latest advances in 2D metal (hydr)oxide nanosheets are first reviewed, including the applications in electrocatalysis for the hydrogen evolution reaction, oxygen reduction reaction, and oxygen evolution reaction. Then, the electronic structure-property relationships of 2D metal (hydr)oxide nanosheets are discussed to draw a picture of enhancing the electrocatalysis performances through a series of electronic structure tuning strategies. Finally, perspectives on the current challenges and the trends for the future design of 2D metal (hydr)oxide electrocatalysts with prominent catalytic activity are outlined. It is expected that this Review can shed some light on the design of next generation electrocatalysts.

A review of the role and mechanism of surfactants in the morphology control of metal nanoparticles

Although great progress has been made in the synthesis of metal nanoparticles, good repeatability and accurate predictability are still difficult to achieve. This difficulty can be attributed to the synthetic method based primarily on observation and subjective experience, and the role of many surfactants remains unclear. It should be noted that surfactants play an important role in the synthetic process. Understanding their function and mechanism in the synthetic process is a prerequisite for the rational design of nanocatalysts with ideal morphology and performance. In this review article, the function of surfactants is introduced first, and then the mechanism of action of surfactants in controlling the morphology of nanoparticles is discussed according to the types of surfactants, and the promoting and sealing effects of surfactants on the crystal surface is revealed. The relationship between surfactants and the morphology structure of nanoparticles is studied. The removal methods of surfactants are discussed, and the existing problems in the current development strategy are summarized. Finally, the application of surfactants in controlling the morphology of metal nanocrystals is prospected. It is hoped that the review can open up new avenues for the synthesis of nanocrystals.

Recent Progress of Ultrathin 2D Pd-Based Nanomaterials for Fuel Cell Electrocatalysis

Pd- and Pd-based catalysts have emerged as potential alternatives to Pt- and Pt-based catalysts for numerous electrocatalytic reactions, particularly fuel cell-related reactions, including the anodic fuel oxidation reaction (FOR) and cathodic oxygen reduction reaction (ORR). The creation of Pd- and Pd-based architectures with large surface areas, numerous low-coordinated atoms, and high density of defects and edges is the most promising strategy for improving the electrocatalytic performance of fuel cells. Recently, 2D Pd-based nanomaterials with single or few atom thickness have attracted increasing interest as potential candidates for both the ORR and FOR, owing to their remarkable advantages, including high intrinsic activity, high electron mobility, and straightforward surface functionalization. In this review, the recent advances in 2D Pd-based nanomaterials for the FOR and ORR are summarized. A fundamental understanding of the FOR and ORR is elaborated. Subsequently, the advantages and latest advances in 2D Pd-based nanomaterials for the FOR and ORR are scientifically and systematically summarized. A systematic discussion of the synthesis methods is also included which should guide researchers toward more efficient 2D Pd-based electrocatalysts. Lastly, the future outlook and trends in the development of 2D Pd-based nanomaterials toward fuel cell development are also presented.

Pt distribution-controlled Ni–Pt nanocrystals via an alcohol reduction technique for the oxygen reduction reaction

The catalytic performance and durability of Ni–Pt alloy nanoparticles synthesized using an alcohol reduction technique were enhanced by controlling the metallic Pt distribution.

Implanting Atomic Dispersed Ru in PtNi Colloidal Nanocrystal Clusters for Efficient Catalytic Performance in Electro-oxidation of Liquid Fuels

Although PtRu alloy nanocatalysts have been certified to possess excellent electrocatalytic performance and CO-poisoning tolerance toward formic acid and methanol electro-oxidation, the unaffordable usages of ruthenium (Ru) and platinum (Pt) have greatly limited their widespread adoption. Here, a facile one-pot method is reported for implanting atomic dispersed Ru in PtNi colloidal nanocrystal clusters with different Ru/Pt/Ni molar ratios, greatly reducing the dosages of Pt and Ru, and further improving the catalytic performances for the electro-oxidation of formic acid and methanol. Through simple control of the amount of Ni(acac)₂ precursor, trimetallic Ru_0.3 Pt_70.5 Ni_29.2 , Ru_0.6 Pt_55.9 Ni_43.5 , Ru_0.2 Pt_77.3 Ni_22.5 , and Ru_0.9 Pt_27.3 Ni_71.8 colloidal nanocrystal clusters (CNCs) are obtained. In particular, the Ru_0.3 Pt_70.5 Ni_29.2 CNCs exhibit excellent specific activities for formic acid and methanol electro-oxidation, that is, 14.2 and 15.3 times higher, respectively, than those of the Pt/C catalyst. Moreover, the Ru_0.3 Pt_70.5 Ni_29.2 CNCs also possess better anti-CO-poisoning properties and diffusion ability than the other RuPtNi CNCs. The excellent formic acid and methanol electro-oxidation activities of RuPtNi CNCs are ascribed to the optimal ligand effects derived from the Pt, Ni, and atomic dispersed Ru atoms, which can improve the OH adsorption ability and further the anti-CO-poisoning capability. This research opens a new door for increasing the electro-oxidation properties of liquid fuels by using lower dosages of noble metals in Pt-based catalysts.

MOF-Derived 2D/3D Hierarchical N-Doped Graphene as Support for Advanced Pt Utilization in Ethanol Fuel Cell

Development of bifunctional catalysts with low platinum (Pt) content for the ethanol oxidation reaction (EOR) and the oxygen reduction reaction (ORR) is highly desirable, yet challenging. Herein, we present structural engineering of a series of two-dimensional/three-dimensional (2D/3D) hierarchical N-doped graphene-supported nanosized Pt₃Co alloys and Co clusters (PtCo@N-GNSs) via a hydrolysis-pyrolysis route. For the ORR, the optimal PtCo@N-GNS exhibits a high mass activity of 3.01 A mg_Pt^-1, which is comparable to the best Pt-based catalyst obtained through sophisticated synthesis. It also possesses excellent stability with minor decay after 50 000 cyclic voltammograms (CV) cycles in acidic medium. For the EOR, PtCo@N-GNS achieves the highest mass-specific and area-specific activities of 1.96 A mg_Pt^-1 and 5.75 mA cm^-2, respectively, among all of the reported EOR catalysts to date. The unique 2D/3D hierarchy, high Pt utilization, and valid encapsulation of nanosized Pt₃Co/Co synergistically contribute to the robust ORR and EOR activities of the present PtCo@N-GNS. A direct ethanol fuel cell based on PtCo@N-GNS delivers a high open-circuit potential of 0.9 V, a stable power density of 10.5 mW cm^-2, and an excellent rate performance, implying the feasibility of the bifunctional PtCo@N-GNS. This work offers a new strategy for designing an ultralow Pt loading yet highly active and durable catalyst for ethanol fuel cell application.

Catalytic Nanoframes and Beyond

The ever-increasing need for the production and expenditure of sustainable energy is a result of the astonishing rate of consumption of fossil fuels and the accompanying environmental problems. Emphasis is being directed to the generation of sustainable energy by the fuel cell and water splitting technologies. Accordingly, the development of highly efficient electrocatalysts has attracted significant interest, as the fuel cell and water splitting technologies are critically dependent on their performance. Among numerous catalyst designs under investigation, nanoframe catalysts have an intrinsically large surface area per volume and a tunable composition, which impacts the number of catalytically active sites and their intrinsic catalytic activity, respectively. Nevertheless, the structural integrity of the nanoframe during electrochemical operation is an ongoing concern. Some significant advances in the field of nanoframe catalysts have been recently accomplished, specifically geared to resolving the catalytic stability concerns and significantly boosting the intrinsic catalytic activity of the active sites. Herein, general synthetic concepts of nanoframe structures and their structure-dependent catalytic performance are summarized, along with recent notable advances in this field. A discussion on the remaining challenges and future directions, addressing the limitations of nanoframe catalysts, are also provided.

Unveiling One-Pot Template-Free Fabrication of Exquisite Multidimensional PtNi Multicube Nanoarchitectonics for the Efficient Electrochemical Oxidation of Ethanol and Methanol with a Great Tolerance for CO

Multidimensional bimetallic Pt-based nanoarchitectonics are highly promising in electrochemical energy conversion technologies because of their fancy structural merits and accessible active sites; however, hitherto their precise template-free fabrication remains a great challenge. We report a template-free solvothermal one-pot approach for the rational design of cocentric PtNi multicube nanoarchitectonics via adjusting the oleylamine/oleic acid ratio with curcumin. The obtained multidimensional PtNi multicubes comprise multiple small interlace-stacked nanocube subunits assembled in spatially porous branched nanoarchitectonics and bound by high-index facets. The synthetic mechanism is driven by spontaneous isolation among prompt nucleation and oriented attachment epitaxial growth. These inimitable architectural and compositional merits of PtNi multicubes endowed the ethanol oxidation mass and specific activity by 5.6 and 9.03 times than the Pt/C catalyst, respectively, along with the enhancement of methanol oxidation mass activity by 2.3 times. Moreover, PtNi multicubes showed superior durability and a higher tolerance for CO poisoning than the Pt/C catalyst. This work may pave the way for tailored preparation of Pt-based nanoarchitectonics for myriad catalytic reactions.

Ultra-small intermetallic NiZn nanoparticles: a non-precious metal catalyst for efficient electrocatalysis

Intermetallics are long-range-ordered alloys traditionally synthesized by annealing nanoparticles of a random alloy, which results in the sintering of the nanoparticles and leads to the formation of polydispersed samples. It thus remains a challenge to achieve a monodispersion of tiny intermetallics. In the current work, ultra-small monodisperse intermetallic NiZn nanoparticles were synthesized based on a low-temperature solution chemistry route involving the chemical conversion of metal nanoparticles into an ordered alloy using an organometallic zinc precursor. During the transformation of single metal nanoparticles into the corresponding alloy, the particles retained their morphology. The resulting ordered alloy made up of earth-abundant materials demonstrated high electrocatalytic performance for the oxygen evolution reaction (OER) with a low overpotential of 283 mV at a current density of 10 mA cm^-2 and a small Tafel slope of 73 mV dec^-1, along with excellent stability and durability. The prepared intermetallic NiZn exhibited outstanding OER efficacy, better than those of a Ni_0.7Zn_0.3 alloy, pure Ni nanoparticles and even state-of-the art RuO₂. The atomic ordering as well as the modification of the electronic structure of Ni upon becoming alloyed with Zn, together with an atomic-scale synergistic effect produced from Ni and Zn, led to the enhanced intrinsic catalytic activity. The present findings point to a general route to produce nanoscale tiny alloys and also provide excellent electrocatalysts having exceptional energy conversion efficiency.

Nature-inspired electrocatalysts and devices for energy conversion

A NICE approach for the design of nature-inspired electrocatalysts and electrochemical devices for energy conversion.

Metallic nanostructures with low dimensionality for electrochemical water splitting

Metallic nanostructures with low dimensionality (one-dimension and two-dimension) possess unique structural characteristics and distinctive electronic and physicochemical properties including high aspect ratio, high specific surface area, high density of surface unsaturated atoms and high electron mobility. These distinctive features have rendered them remarkable advantages over their bulk counterparts for surface-related applications, for example, electrochemical water splitting. In this review article, we highlight the recent research progress in low-dimensional metallic nanostructures for electrochemical water splitting including hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Fundamental understanding of the electrochemistry of water splitting including HER and OER is firstly provided from the aspects of catalytic mechanisms, activity descriptors and property evaluation metrics. Generally, it is challenging to obtain low-dimensional metallic nanostructures with desirable characteristics for HER and OER. We hereby introduce several typical methods for synthesizing one-dimensional and two-dimensional metallic nanostructures including organic ligand-assisted synthesis, hydrothermal/solvothermal synthesis, carbon monoxide confined growth, topotactic reduction, and templated growth. We then put emphasis on the strategies adopted for the design and fabrication of high-performance low-dimensional metallic nanostructures for electrochemical water splitting such as alloying, structure design, surface engineering, interface engineering and strain engineering. The underlying structure-property correlation for each strategy is elucidated aiming to facilitate the design of more advanced electrocatalysts for water splitting. The challenges and perspectives for the development of electrochemical water splitting and low-dimensional metallic nanostructures are also proposed.

Ultrafine PtCuRh nanowire catalysts with alleviated poisoning effect for efficient ethanol oxidation

As a green power source, direct ethanol fuel cells (DEFCs) have broad application prospects. However, most catalysts of DEFCs still exhibit defects, such as the difficulty of C-C bond cleavage, serious CO poisoning and limited catalytic activity. Here, we report ultrafine PtCuRh nanowires (NWs) with outstanding anti-CO-poisoning properties and enhanced activity. The average diameter of the ultrafine PtCuRh NWs is about 1.49 nm, effectively improving the atomic utilization efficiency (UE) of platinum. Owing to the combination of an ultrafine nanostructure, good electronic interaction and the high UE of Pt atoms, the optimized ultrafine PtCuRh NWs/C display superior electrocatalytic activity and stability compared with commercial Pt/C for the ethanol oxidation reaction (EOR). More importantly, further electrochemical results demonstrate that the incorporation of Rh is beneficial for enhancing the antipoisoning capability for some CO-like intermediates. Meanwhile, the synthetic method in this report is robust and universal, and can also be applied to the synthesis of ultrafine trimetallic PtCuPd and PtCuIr nanowires.

From bimetallic PdCu nanowires to ternary PdCu-SnO2 nanowires: Interface control for efficient ethanol electrooxidation

At present, although a large number of palladium-based nanowire electrocatalysts have been prepared, there are few reports on nanowires containing rich metal oxides. Herein, porous PdCu alloy nanowires and PdCu-SnO₂ nanowires were prepared by using a galvanic displacement synthesis method. Due to their one-dimensional structure, rough surfaces with non-homogeneous edges, electronic effect, and the advanced PdCu/SnO₂ interface of the as-synthesized PdCu-SnO₂ nanowire catalysts, they exhibited a mass activity of 7770.0 mA mg^-1 towards ethanol oxidation, which was 7.6-fold higher than that of Pd/C catalysts (1025.0 mA mg^-1). In addition, they behaved strong durability upon chronoamperometry and continuous cyclic voltammetry tests. The electrochemical measurements demonstrated that SnO₂ was introduced into the PdCu/SnO₂ interface, which promoted the oxidation of ethanol at a lower potential and accelerated the oxidation of Pd-CO_ads via SnO₂-OH_ads to regenerate the active sites. This research highlights the significance of introducing metal oxides into the nanostructure interface, and the performance of Pd-containing catalysts towards ethanol oxidation reaction was greatly improved.

Amorphous Oxide Nanostructures for Advanced Electrocatalysis

Amorphous oxides have attracted special attention as advanced electrocatalysts owing to their unique local structural flexibility and attractive electrocatalytic properties. With abundant randomly oriented bonds and surface-exposed defects (e.g., oxygen vacancies) as active catalytic sites, the adsorption/desorption of reactants can be optimized, leading to superior catalytic activities. Amorphous oxide materials have found wide electrocatalytic applications ranging from hydrogen evolution and oxygen evolution to oxygen reduction, CO₂ electroreduction and nitrogen electroreduction. The amorphous oxide electrocatalysts even outperform their crystalline counterparts in terms of electrocatalytic activity and stability. Despite of the merits and achievements for amorphous oxide electrocatalysts, there are still issues and challenges existing for amorphous oxide electrocatalysts. There are rarely reviews specifically focusing on amorphous oxide electrocatalysts and therefore it is imperative to have a comprehensive overview of the research progress and to better understand the achievements and issues with amorphous oxide electrocatalysts. In this minireview, several general preparation methods for amorphous oxides are first introduced. Then, the achievements in amorphous oxides for several important electrocatalytic reactions are summarized. Finally, the challenges and perspectives for the development of amorphous oxide electrocatalysts are outlined.