Diphosphine-Protected Au22 Nanoclusters on Oxide Supports Are Active for Gas-Phase Catalysis without Ligand Removal

A Theoretical Benchmark of the Geometric and Optical Properties for 3d Transition Metal Nanoclusters via Density Functional Theory

Understanding structure-property relationships in atomically precise metal nanoclusters is vital in finding selective and tunable catalysts. In this study, density functional theory (DFT) was used to benchmark seven exchange correlation functionals at different basis sets for 17 atomically precise nanoclusters against experimentally determined geometries, band gaps, and optical gaps. The set contains both monometallic and bimetallic clusters that possess at least two types of 3d transition metals (specifically, Cu, Ni, Fe, or Co). The benchmark highlights that PBE0 is a good functional to use regardless of the basis set, and Minnesota functionals do well with respect to specific metals. Further, while long-range corrected functionals overestimate band and optical gaps, they model absorption features better than the other considered functionals. The study additionally looks at the photoinduced hydrogen evolution reaction (HER) and the CO2 reduction mechanism on nanoclusters reported from the literature.

Advanced Functionalized Nanoclusters (Cu, Ag, and Au) as Effective Catalyst for Organic Transformation Reactions

A considerable amount of research has been carried out in recent years on synthesizing metal nanoclusters (NCs), which have wide applications in the field of optical materials with non-linear properties, bio-sensing, and catalysis. Aside from being structurally accurate, the atomically precise NCs possess well-defined compositions due to significant tailoring, both at the surface and the core, for certain functionalities. To illustrate the importance of atomically precise metal NCs for catalytic processes, this review emphasizes 1) the recent work on Cu, Ag, and Au NCs with their synthesis, 2) the parameters affecting the activity and selectivity of NCs catalysis, and 3) the discussion on the catalytic potential of these metal NCs. Additionally, metal NCs will facilitate the design of extremely active and selective catalysts for significant reactions by elucidating catalytic mechanisms at the atomic and molecular levels. Future advancements in the science of catalysis are expected to come from the potential to design NCs catalysts at the atomic level.

Tandem Nitrate-to-Ammonia Conversion on Atomically Precise Silver Nanocluster/MXene Electrocatalyst

Electrocatalytic reduction of nitrate (NO3 RR) to synthesize ammonia (NH3 ) provides a competitive manner for carbon neutrality and decentralized NH3 synthesis. Atomically precise nanoclusters, as an advantageous platform for investigating the NO3 RR mechanisms and actual active sites, remain largely underexplored due to the poor stability. Herein, we report a (NH4 )9 [Ag9 (mba)9 ] nanoclusters (Ag9 NCs) loaded on Ti3 C2 MXene (Ag9 /MXene) for highly efficient NO3 RR performance towards ambient NH3 synthesis with improved stability in neutral medium. The composite structure of MXene and Ag9 NCs enables a tandem catalysis process for nitrate reduction, significantly increasing the selectivity and FE of NH3 . Besides, compared with individual Ag9 NCs, Ag9 /MXene has better stability with the current density performed no decay after 108 hours of reaction. This work provides a strategy for improving the catalytic activity and stability of atomically precise metal NCs, expanding the mechanism research and application of metal NCs.

Structure control and evolution of atomically precise gold clusters as heterogeneous precatalysts

Metal clusters have distinct features from single atom and nanoparticle (>1 nm) catalysts, making them effective catalysts for various heterogeneous reactions. Nevertheless, the ambiguity and complexity of the catalyst structure preclude in-depth mechanistic studies. The evolution of metal species during synthesis and reaction processes represents another challenge. One effective solution is to precisely control the structure of the metal cluster, thus offering a well-defined pre-catalyst. The well-defined chemical formula and configurations make atomically precise metal nanoclusters optimal choices. To fabricate an atomically precise metal nanocluster-based heterogeneous catalyst with enhanced performance, careful structural design of both the nanocluster and support material, an effective assembling technique, and a pre-treatment method for these hybrids need to be developed. In this review, we summarize recent advances in in the development of heterogeneous catalysts using atomically precise gold and alloy gold nanoclusters as precursors. We will begin with a brief introduction to the structural properties of atomically precise nanoclusters and structure determination of cluster/support hybrids. We will then introduce heterogeneous catalysts prepared from medium size (tens to hundreds of metal atoms) and low nuclearity nanoclusters. We will illustrate how ligand modification, support-cluster interaction, hybrid fabrication, and heteroatom (Pt, Pd Ag, Cu, Cd, Fe) introduction affect the structural properties and pretreatment/reaction-induced structural evolution of gold nanocluster pre-catalysts. Lastly, we will highlight the synthetic method of NCs@MOF hybrids and their effectiveness in circumventing the adverse cluster structural evolution. These findings are expected to shed light on the structure-activity relationship studies and future catalyst design strategies using atomically precise metal nanocluster pre-catalysts.

Synchronous Metal Rearrangement on Two-Dimensional Equatorial Surfaces of Au-Cu Alloy Nanoclusters

Understanding the growth of nanoclusters and the relationship between structure-activity depends on the precise arrangement of metals on their surface. In this work, we realized the synchronous rearrangement of metal atoms on the equatorial plane of Au-Cu alloy nanoclusters. Upon adsorption of the phosphine ligand, the Cu atoms on the equatorial plane of the Au₅₂Cu₇₂(SPh)₅₅ nanocluster are irreversibly rearranged. The whole metal rearrangement process can be understood from a synchronous metal rearrangement mechanism initiated by the adsorption of the phosphine ligand. Furthermore, this metal rearrangement can effectively improve the efficiency of A³ coupling reactions without increasing the amount of catalyst.

Structural evolution after oxidative pretreatment and CO oxidation of Au nanoclusters with different ligand shell composition: a view on the Au core

The reactivity of supported monolayer protected Au nanoclusters is directly affected by their structural dynamics under pretreatment and reaction conditions. The effect of different types of ligands of Au clusters supported on CeO₂ on their core structure evolution, under oxidative pretreatment and CO oxidation reaction, was investigated. X-ray absorption and X-ray photoelectron spectroscopy studies revealed that the clusters evolve to a similar core structure above 250 °C in all the cases, indicating the active role of the ligand-support interaction in the reaction.

Surfactant- and Ligand-Free Synthesis of Platinum Nanoparticles in Aqueous Solution for Catalytic Applications

The synthesis of surfactant-free and organic ligand-free metallic nanoparticles in solution remains challenging due to the nanoparticles’ tendency to aggregate. Surfactant- and ligand-free nanoparticles are particularly desirable in catalytic applications as surfactants, and ligands can block access to the nanoparticles’ surfaces. In this contribution, platinum nanoparticles are synthesized in aqueous solution without surfactants or bound organic ligands. Pt is reduced by sodium borohydride, and the borohydride has a dual role of reducing agent and weakly interacting stabilizer. The 5.3 nm Pt nanoparticles are characterized using UV-visible spectroscopy and transmission electron microscopy. The Pt nanoparticles are then applied as catalysts in two different reactions: the redox reaction of hexacyanoferrate(III) and thiosulfate ions, and H2O2 decomposition. Catalytic activity is observed for both reactions, and the Pt nanoparticles show up to an order of magnitude greater activity over the most active catalysts reported in the literature for hexacyanoferrate(III)/thiosulfate redox reactions. It is hypothesized that this enhanced catalytic activity is due to the increased electron density that the surrounding borohydride ions give to the Pt nanoparticle surface, as well as the absence of surfactants or organic ligands blocking surface sites.

Electronic Tuning of Gold Nanoparticle Active Sites for Reduction Catalysis

Electronic tuning of active sites in heterogeneous catalysis with organic ligands remains challenging since the ligands are often bound to the most active sites on the catalysts' surfaces. In this work, gold nanoparticles, which are on average less than 2 nm in diameter, are synthesized with strongly binding thiol and phosphine ligands and have measurable quantities of accessible sites on their surfaces in both cases. Triphenylphosphine (TPP) is used as the phosphine ligand, while triphenylmethyl mercaptan (TPMT) serves as the thiol ligand. Phosphines are chosen because they are electron-donating ligands when bound to Au, and thiols are selected because they are electron-withdrawing on the Au surface. X-ray photoelectron spectroscopy (XPS) results show differences in the Au 4f binding energies between the TPP- and TPMT-bound Au nanoparticles. Fourier transform infrared spectroscopy (FTIR) measurements of bound CO indicate that the TPP-bound Au nanoparticles are more electron-rich than the TPMT-bound Au nanoparticles. The number of binding sites on the surface is quantified using 2-naphthalenethiol titration experiments. It is observed that the number of binding sites on the thiol and phosphine-bound Au nanoparticles is similar in both cases. The Au nanoparticles are used for three different reactions: resazurin reduction, CO oxidation, and benzyl alcohol oxidation. For both CO oxidation and benzyl alcohol oxidation, which are performed with the ligands attached, TPP- and TPMT-bound nanoparticles are both catalytically active. However, for resazurin reduction, the TPMT-bound Au nanoparticles are not active, while the TPP-bound Au nanoparticles are catalytically active. These results illustrate that the catalytic activity can be tuned using bound organic ligands with different electronic properties for reduction reactions using Au nanoparticle catalysts.

Structural Engineering toward Gold Nanocluster Catalysis

Atomically precise gold nanoclusters provide great opportunities to explore the relationship between the structure and properties of nanogold catalysts. A nanocluster consists of a metal core and a surface ligand shell, and both the core and shell have significant effects on the catalytic properties. Thanks to their precise structures, the active metal site of the clusters can be readily identified and the effects of ligands on catalysis can be disclosed. In this Minireview, we summarize recent advances in catalytic research of gold nanoclusters, emphasizing four strategies for constructing open metal sites, including by post-treatment, the bulky ligands strategy, the surface geometric mismatch method, and heteroatom doping procedures. We also discuss the effects of ligands on the catalytic activity, selectivity, and stability of gold cluster catalysts. Finally, we present future challenges relating to gold cluster catalysis.

Mixed-ligand strategy for synthesizing water-soluble chiral gold clusters with phosphine ligands

Water-soluble chiral metal clusters have drawn much attention by virtue of their fascinating physicochemical properties and potential biomedical applications, but currently, phosphine-protected Au clusters with both chirality and water-solubility are still very limited. In this article, we demonstrate a mixed-ligand strategy for the facile synthesis of atomically precise, water-soluble chiral Au clusters protected by phosphine alone. The clusters are obtained by the reduction of aurate ions in the presence of a phosphine mixture consisting of highly hydrophilic monophosphine (i.e., triphenylphosphine trisulfonate; TPPTS) and hydrophobic chiral diphosphine (i.e., S-Segphos or S-BINAP), both of which are commercially available. The clusters are size/composition-separated via gel electrophoresis, and notably, heptanuclear cluster Au₇(S-Segphos)₃(TPPTS)₂ exhibits a large chiroptical activity with the maximum anisotropy factor (g-factor) of 4.7 × 10^-3, one of the largest values in such Au clusters. Quantum chemical calculations for model Au₇ cluster species suggest two important factors to obtain large chiroptical activity: (i) more than two axially-chiral diphosphine ligands, and (ii) the absence of configurational isomer averaging. Consequently, despite the experimental use of a mixture containing both chiral and achiral phosphines, a large chiroptical activity can be created in Au clusters with high water-solubility.

CeO2 Supported Gold Nanocluster Catalysts for CO Oxidation: Surface Evolution Influenced by the Ligand Shell

Monolayer protected Au nanocluster catalysts are known to undergo structural changes during catalytic reactions, including dissociation and migration of ligands onto the support, which strongly affects their activity and stability. To better understand how the nature of ligands influences the catalytic activity of such catalysts, three types of ceria supported Au nanoclusters with different kinds of ligands (thiolates, phosphines and a mixture thereof) have been studied, employing CO oxidation as model reaction. The thiolate-protected Au25/CeO2 showed significantly higher CO conversion after activation at 250 °C than the cluster catalysts possessing phosphine ligands. Temperature programmed oxidation and in situ infrared spectroscopy revealed that while the phosphine ligands seemed to decompose and free Au surface was exposed, temperatures higher than 250 °C are required to efficiently remove them from the whole catalyst system. Moreover, the presence of residues on the support seemed to have much greater influence on the reactivity than the gold particle size.

Selective Semihydrogenation of Polarized Alkynes by a Gold Hydride Nanocluster

The hydridic hydrogen in nanogold catalysts has long been postulated as an important intermediate in hydrogenation reactions, but it has not been directly observed. Here, we report the synthesis of a new undecagold cluster with a bidentate phosphine ligand. The chelating effects of the bidentate ligand result in a more symmetric Au₁₁ core with two labile Cl^- ligands that can exchange with BH₄^-, leading to a novel undecagold hydride cluster. The new hydride cluster is discovered to readily undergo hydroauration reaction with alkynes containing electron-withdrawing groups, forming key gold-alkenyl semihydrogenation intermediates, which can be efficiently and selectively converted to Z-alkenes under acidic conditions. All key reaction intermediates are isolated and characterized, providing atomic-level insights into the active sites and mechanisms of semihydrogenation reactions catalyzed by gold-based nanomaterials. The hydridic hydrogen in the undecagold cluster is found to be the key to prevent over hydrogenation of alkenes to alkanes. The current study provides fundamental insights into hydrogenation chemistry enabled by gold-based nanomaterials and may lead to the development of efficient catalysts for selective semihydrogenation or functionalization of alkynes.

A Review of State of the Art in Phosphine Ligated Gold Clusters and Application in Catalysis

Atomically precise gold clusters are highly desirable due to their well-defined structure which allows the study of structure-property relationships. In addition, they have potential in technological applications such as nanoscale catalysis. The structural, chemical, electronic, and optical properties of ligated gold clusters are strongly defined by the metal-ligand interaction and type of ligands. This critical feature renders gold-phosphine clusters unique and distinct from other ligand-protected gold clusters. The use of multidentate phosphines enables preparation of varying core sizes and exotic structures beyond regular polyhedrons. Weak gold-phosphorous (Au-P) bonding is advantageous for ligand exchange and removal for specific applications, such as catalysis, without agglomeration. The aim of this review is to provide a unified view of gold-phosphine clusters and to present an in-depth discussion on recent advances and key developments for these clusters. This review features the unique chemistry, structural, electronic, and optical properties of gold-phosphine clusters. Advanced characterization techniques, including synchrotron-based spectroscopy, have unraveled substantial effects of Au-P interaction on the composition-, structure-, and size-dependent properties. State-of-the-art theoretical calculations that reveal insights into experimental findings are also discussed. Finally, a discussion of the application of gold-phosphine clusters in catalysis is presented.

A Heteroleptic Gold Hydride Nanocluster for Efficient and Selective Electrocatalytic Reduction of CO2 to CO

It has been a long-standing challenge to create and identify the active sites of heterogeneous catalysts, because it is difficult to precisely control the interfacial chemistry at the molecular level. Here we report the synthesis and catalysis of a heteroleptic gold trihydride nanocluster, [Au₂₂H₃(dppe)₃(PPh₃)₈]³⁺ [dppe = 1,2-bis(diphenylphosphino)ethane, PPh₃ = triphenylphosphine]. The Au₂₂H₃ core consists of two Au₁₁ units bonded via six uncoordinated Au sites. The three H atoms bridge the six uncoordinated Au atoms and are found to play a key role in catalyzing electrochemical reduction of CO₂ to CO with a 92.7% Faradaic efficiency (FE) at -0.6 V (vs RHE) and high reaction activity (134 A/g_Au mass activity). The CO current density and FE_CO remained nearly constant for the CO₂ reduction reaction for more than 10 h, indicating remarkable stability of the Au₂₂H₃ catalyst. The Au₂₂H₃ catalytic performance is among the best Au-based catalysts reported thus far for electrochemical reduction of CO₂. Density functional theory (DFT) calculations suggest that the hydride coordinated Au sites are the active centers, which facilitate the formation of the key *COOH intermediate.

Metal-nanocluster Science and Technology: My Personal History and Outlook

Metal nanoclusters (NCs) are among the leading targets in research of nanoscale materials, and elucidation of their properties (science) and development of control techniques (technology) have been continuously studied for...

Experiment and Theory Clarify: Sc+ Receives One Oxygen Atom from SO2 to Form ScO+, which Proves to be a Catalyst for the Hidden Oxygen-Exchange with SO2

Using Fourier‐transform ion cyclotron resonance mass spectrometry, it was experimentally determined that Sc⁺ in the highly diluted gas phase reacts with SO₂ to form ScO⁺ and SO. By ¹⁸O labeling, ScO⁺ was shown to play the role of a catalyst when further reacting with SO₂ in a Mars‐van Krevelen‐like (MvK) oxygen exchange process, where a solid catalyst actively reacts with the substrate but emerges apparently unchanged at the end of the cycle. High‐level quantum chemical calculations confirmed that the multi‐step process to form ScO⁺ and SO is exoergic and that all intermediates and transition states in between are located energetically below the entrance level. The reaction starts from the triplet surface; although three spin‐crossing points with minimal energy have been identified by computational means, there is no evidence that a two‐state scenario is involved in the course of the reaction, by which the reactants could switch from the triplet to the singlet surface and back. Pivotal to the oxygen exchange reaction of ScO⁺ with SO₂ is the occurrence of a highly symmetric four‐membered cyclic intermediate by which two oxygen atoms become equivalent.

Creation of High-Performance Heterogeneous Photocatalysts by Controlling Ligand Desorption and Particle Size of Gold Nanocluster

Recently, the creation of new heterogeneous catalysts using the unique electronic/geometric structures of small metal nanoclusters (NCs) has received considerable attention. However, to achieve this, it is extremely important to establish methods to remove the ligands from ligand-protected metal NCs while preventing the aggregation of metal NCs. In this study, the ligand-desorption process during calcination was followed for metal-oxide-supported 2-phenylethanethiolate-protected gold (Au) 25-atom metal NCs using five experimental techniques. The results clearly demonstrate that the ligand-desorption process consists of ligand dissociation on the surface of the metal NCs, adsorption of the generated compounds on the support and desorption of the compounds from the support, and the temperatures at which these processes occurred were elucidated. Based on the obtained knowledge, we established a method to form a metal-oxide layer on the surface of Au NCs while preventing their aggregation, thereby succeeding in creating a water-splitting photocatalyst with high activity and stability.

The synthesis and characterization of a new diphosphine-protected gold hydride nanocluster

Gold is the most inert metal and does not form a bulk hydride. However, gold becomes chemically active in the nanometer scale and gold nanoparticles have been found to exhibit important catalytic properties. Here, we report the synthesis and characterization of a highly stable ligand-protected gold hydride nanocluster, [Au₂₂H₃(dppee)₇]³⁺ [dppee = bis(2-diphenylphosphino) ethyl ether]. A synthetic method is developed to obtain high purity samples of the gold trihydride nanocluster with good yields. The properties of the new hydride cluster are characterized with different experimental techniques, as well as theoretical calculations. Solid samples of [Au₂₂H₃(dppee)₇]³⁺ are found to be stable under ambient conditions. Both experimental evidence and theoretical evidence suggest that the Au₂₂H₃ core of the [Au₂₂H₃(dppee)₇]³⁺ hydride nanocluster consists of two Au₁₁ units bonded via two triangular faces, creating six uncoordinated Au sites at the interface. The three H atoms bridge the six uncoordinated Au atoms at the interface. The Au₁₁ unit behaves as an eight-electron trivalent superatom, forming a superatom triple bond (Au₁₁ ≡ Au₁₁) in the [Au₂₂H₃(dppee)₇]³⁺ trihydride nanocluster assisted by the three bridging H atoms.

Toward the creation of high-performance heterogeneous catalysts by controlled ligand desorption from atomically precise metal nanoclusters

Ligand-protected metal nanoclusters controlled by atomic accuracy (i. e. atomically precise metal NCs) have recently attracted considerable attention as active sites in heterogeneous catalysts. Using these atomically precise metal NCs, it becomes possible to create novel heterogeneous catalysts based on a size-specific electronic/geometrical structure of metal NCs and understand the mechanism of the catalytic reaction easily. However, to create high-performance heterogeneous catalysts using atomically precise metal NCs, it is often necessary to remove the ligands from the metal NCs. This review summarizes previous studies on the creation of heterogeneous catalysts using atomically precise metal NCs while focusing on the calcination as a ligand-elimination method. Through this summary, we intend to share state-of-art techniques and knowledge on (1) experimental conditions suitable for creating high-performance heterogeneous catalysts (e.g., support type, metal NC type, ligand type, and calcination temperature), (2) the mechanism of calcination, and (3) the mechanism of catalytic reaction over the created heterogeneous catalyst. We also discuss (4) issues that should be addressed in the future toward the creation of high-performance heterogeneous catalysts using atomically precise metal NCs. The knowledge and issues described in this review are expected to lead to clear design guidelines for the creation of novel heterogeneous catalysts.

A AuNP-capped cage fluorescent biosensor based on controlled-release and cyclic enzymatic amplification for ultrasensitive detection of ATP

Gold nanodevices have attracted extensive interest in the detection of specific targets within cells. However, constructing gold sensing devices that can be activated by the simulation of remote applications remains a huge challenge. Here, we report a Au nanoparticle (AuNP)-capped cage fluorescent biosensor based on controlled-release and Exonuclease III (Exo III) assisted cyclic enzymatic amplification that can be activated by adenosine triphosphate (ATP). In the system, AuNPs were used as the building blocks to cap the pores of Au nanocages (AuNCs) loaded with Rhodamine B (RhB) molecules through the hybridization of DNA. The RhB fluorescent molecules were finally released with the help of Exo III in the presence of ATP for detection purposes. Ultimately, the biosensor leads to a wide linear ATP detection range from 1.0 × 10-9 to 1.0 × 10-7 M with a limit of detection (LOD) down to 0.88 nM. In addition, it also has good selectivity for ATP to distinguish between ATP and ATP analogues such as cytidine triphosphate (CTP), guanosine triphosphate (GTP), and uridine triphosphate (UTP). Therefore, as a convenient and sensitive biosensor, it is expected to be widely used in the biomedical field.

Ion Mobility Spectrometry Characterization of the Intermediate Hydrogen-Containing Gold Cluster Au7(PPh3)7H52

We employ ion mobility spectrometry and density functional theory to determine the structure of Au₇(PPh₃)₇H₅²⁺ (PPh₃ = triphenylphosphine), which was recently identified by high mass resolution mass spectrometry. Experimental ion-neutral collision cross sections represent the momentum transfer between the ionic clusters and gas molecules averaged over the relative thermal velocities of the colliding pair, thereby providing structural insights. Theoretical calculations indicate the geometry of Au₇(PPh₃)₇H₅²⁺ is similar to Au₇(PPh₃)₇⁺, with three hydrogen atoms bridging two gold atoms and two hydrogen atoms forming single Au-H bonds. Collision-induced dissociation products observed during IMS experiments reveal that smaller hydrogen-containing clusters may be produced through fragmentation of Au₇(PPh₃)₇H₅²⁺. Our findings indicate that hydrogen-containing species like Au₇(PPh₃)₇H₅²⁺ act as intermediates in the formation of larger phosphine ligated gold clusters. These results advance the understanding and ability to control the mechanisms of size-selective cluster formation, which is necessary for scalable synthesis of clusters with tailored properties.

Dynamics of Pd Dopant Atoms inside Au Nanoclusters during Catalytic CO Oxidation

Doping gold nanoclusters with palladium has been reported to increase their catalytic activity and stability. PdAu24 nanoclusters, with the Pd dopant atom located at the center of the Au cluster core, were supported on titania and applied in catalytic CO oxidation, showing significantly higher activity than supported monometallic Au25 nanoclusters. After pretreatment, operando DRIFTS spectroscopy detected CO adsorbed on Pd during CO oxidation, indicating migration of the Pd dopant atom from the Au cluster core to the cluster surface. Increasing the number of Pd dopant atoms in the Au structure led to incorporation of Pd mostly in the S-(M-S) n protecting staples, as evidenced by in situ XAFS. A combination of oxidative and reductive thermal pretreatment resulted in the formation of isolated Pd surface sites within the Au surface. The combined analysis of in situ XAFS, operando DRIFTS, and ex situ XPS thus revealed the structural evolution of bimetallic PdAu nanoclusters, yielding a Pd single-site catalyst of 2.7 nm average particle size with improved CO oxidation activity.

Ligand-protected gold/silver superatoms: current status and emerging trends

Monolayer-protected gold/silver clusters have attracted much interest as nano-scale building units for novel functional materials owing to their nonbulk-like structures and size-specific properties. They can be viewed as ligand-protected superatoms because their magic stabilities and fundamental properties are well explained in the framework of the jellium model. In the last decade, the number of ligand-protected superatoms with atomically-defined structures has been increasing rapidly thanks to the well-established synthesis and structural determination by X-ray crystallography. This perspective summarizes the current status and emerging trends in synthesis and characterization of superatoms. The topics related to synthesis include (1) development of targeted synthesis based on transformation, (2) enhancement of robustness and synthetic yield for practical applications, and (3) development of controlled fusion and assembly of well-defined superatoms to create new properties. New characterization approaches are also introduced such as (1) mass spectrometry and laser spectroscopies in the gas phase, (2) determination of static and dynamic structures, and (3) computational analysis by machine learning. Finally, future challenges and prospects are discussed for further promotion and development of materials science of superatoms.

This perspective summarizes the current status and emerging trends in synthesis and characterization of ligand-protected gold/silver superatoms.

Towards Atomically Precise Supported Catalysts from Monolayer-Protected Clusters: The Critical Role of the Support

Controlling the size and uniformity of metal clusters with atomic precision is essential for fine-tuning their catalytic properties, however for clusters deposited on supports, such control is challenging. Here, by combining X-ray absorption spectroscopy and density functional theory calculations, it is shown that supports play a crucial role in the evolution of monolayer-protected clusters into catalysts. Based on the acidic nature of the support, cluster-support interactions lead either to fragmentation of the cluster into isolated Au-ligand species or ligand-free metallic Au⁰ clusters. On Lewis acidic supports that bind metals strongly, the latter transformation occurs while preserving the original size of the metal cluster, as demonstrated for various Au_n sizes. These findings underline the role of the support in the design of supported catalysts and represent an important step toward the synthesis of atomically precise supported nanomaterials with tailored physico-chemical properties.

Ligand-free gold nanoclusters confined in mesoporous silica nanoparticles for styrene epoxidation

We present a novel approach to produce gold nanoclusters (Au NCs) in the pores of mesoporous silica nanoparticles (MSNs) by sequential and controlled addition of metal ions and reducing agents. This impregnation technique was followed to confine Au NCs inside the pores of MSNs without adding external ligands or stabilizing agents. TEM images show a uniform distribution of monodisperse NCs with an average size of 1.37 ± 0.4 nm. Since the NCs are grown in situ in MSN pores, additional support and high temperature calcination are not required to use them as catalysts. The use of Au NC/MSNs as a catalyst for the epoxidation of styrene in the presence of tert-butyl hydroperoxide (TBHP) as a terminal oxidant resulted in an 88% conversion of styrene in 12 h with a 74% selectivity towards styrene epoxide. Our observations suggest that this remarkable catalytic performance is due to the small size of Au NCs and the strong interaction between gold and the MSNs. This catalytic conversion is environmentally friendly as it is solvent free. We believe our synthetic approach can be extended to other metal NCs offering a wide range of applications.

Gold Nanoclusters as Electrocatalysts for Energy Conversion

Gold nanoclusters (Aun NCs) exhibit a size-specific electronic structure unlike bulk gold and can therefore be used as catalysts in various reactions. Ligand-protected Aun NCs can be synthesized with atomic precision, and the geometric structures of many Aun NCs have been determined by single-crystal X-ray diffraction analysis. In addition, Aun NCs can be doped with various types of elements. Clarification of the effects of changes to the chemical composition, geometric structure, and associated electronic state on catalytic activity would enable a deep understanding of the active sites and mechanisms in catalytic reactions as well as key factors for high activation. Furthermore, it may be possible to synthesize Aun NCs with properties that surpass those of conventional catalysts using the obtained design guidelines. With these expectations, catalyst research using Aun NCs as a model catalyst has been actively conducted in recent years. This review focuses on the application of Aun NCs as an electrocatalyst and outlines recent research progress.

Activation of atom-precise clusters for catalysis

The use of atom-precise, ligand-protected metal clusters has exceptional promise towards the fabrication of model supported-nanoparticle heterogeneous catalysts which have controlled sizes and compositions. One major challenge in the field involves the ease at which metallic clusters sinter upon removal of protected ligands, thus destroying the structural integrity of the model system. This review focuses on methods used to activate atom-precise thiolate-stabilized clusters for heterogeneous catalysis, and strategies that can be used to mitigate sintering. Thermal activation is the most commonly employed approach to activate atom-precise metal clusters, though a variety of chemical and photochemical activation strategies have also been reported. Material chemistry methods that can mitigate sintering are also explored, which include overcoating of clusters with metal oxide supports fabricated by sol-gel chemistry or atomic layer deposition of thin oxide films or encapsulating clusters within porous supports. In addition to focusing on the preservation of the size and morphology of deprotected metal clusters, the fate of the removed ligands is also explored, because detached and/or oxidized ligands can also greatly influence the overall properties of the catalyst systems. We also show that modern characterization techniques such as X-ray absorption spectroscopy and high-resolution electron microscopy have the capacity to enable careful monitoring of particle sintering upon activation of metal clusters.

Ligand-protected atomically precise gold nanoclusters as model catalysts for oxidation reactions

This feature article provides a systematic overview and outlook on the oxidation reactions catalyzed by gold nanoclusters.

Triple 1D[triple bond, length as m-dash]1D superatomic bonding. Au22(dppo)6 as a Π4- and Δ2-triply bonded cluster based on Au11 assembled units

δ-Bonds have been intimately related to metal-metal bonds of d-elements since the archetypal d⁴-d⁴ [Re₂Cl₈]^2- ion with a σ²π⁴δ² bond. Currently, the notion of multiple superatom arrangements as initial steps toward molecular materials within the building-up approach is dominated by P-shell characteristics, as given in the well-described Au₂₅(SR)₁₈ ligand protected cluster. In this work we rationalize the Au₂₂(dppo)₆ cluster as a triple-bonded 22-valence electron (ve) supermolecule, featuring a bonding scheme based on 1D + 1D shell combinations, which largely contrasts with the 14-ve Au₃₈(SR)₂₄ with mainly 1P + 1P patterns mimicking a F₂ molecule. The resulting Π⁴Δ²-bonding pattern shows an unprecedented superatomic counterpart of a d-shell based bond inherently related to transition-metal dimers, adding useful key aspects to the understanding of species based on cluster-assembly.

An Au22(L8)6 nanocluster with in situ uncoordinated Au as a highly active catalyst for O2 activation and CO oxidation

Ligand-capped gold nanoclusters with atomic precision have attracted great interest as a new type of nanocatalyst to elucidate mechanisms and establish structure-reactivity correlations. In most cases, however, the catalytic activity of fully protected gold nanoclusters is severely hindered due to the blocking effects of the ligands. Alternatively, partially protected gold nanoclusters with the creation of in situ coordination unsaturated (cus) Au are highly promising for nanocatalysis. In this study, via density functional theory (DFT) calculations, we investigated the reactivity of a diphosphine-protected Au22(L8)6 nanocluster using oxygen activation and CO oxidation as the testing probes. The results showed that the cus Au at the interface shows strong adsorption and activation of oxygen, promoting the dissociation of two O2 molecules into fully oxidized Au22(L8)6O4 nanoclusters with a moderate activation barrier (0.6-0.7 eV). The adsorption of additional O2 prefers molecular adsorption and locates at the terminal Au11 unit around the Au-P framework. Furthermore, our results indicate that the Au22(L8)6 cluster shows very high activity and a low energy barrier (0.51 eV) for CO oxidation. The facile O2 activation and CO oxidation over the Au22(L8)6 nanocatalyst will aid the rational design of partially protected metal nanoclusters with coordination unsaturated metal centers in oxidation or other catalytic reactions for important practical applications.

Heterogeneous gold catalysts for selective hydrogenation: from nanoparticles to atomically precise nanoclusters

Gold nanocatalysts with different sizes (nanoparticles and nanoclusters) show different catalytic performances for various selective hydrogenation reactions. The recent breakthrough in a controllable synthesis of atomically precise gold nanoclusters provides unprecedented opportunities for understanding the catalytic behavior at the atomic/molecular levels. Herein, we review the progress in catalytic hydrogenation over gold nanoparticles and atomically precise gold nanoclusters in the last five years. We also compare the results obtained from different reactions so that a better understanding of their catalytic behavior can be obtained. Finally, we provide some future perspectives on gold nanocatalysis.

Role of sterics in phosphine-ligated gold clusters

This study examined the solution-phase exchange reactions of triphenylphosphine (PPh₃) ligands on Au₈L₇²⁺ (L = PPh₃) gold clusters with three different tolyl ligands using electrospray ionization mass spectrometry to provide insight into how steric differences in the phosphines influence the extent of ligand exchange and the stability of the resulting mixed-phosphine clusters.