The Molecular Origin of Anisotropic Emission in an Organic Light-Emitting Diode

Reconstructing the 3D Coordinates of Guest:Host OLED Blends with Single Atom Resolution

The performance of electronic and semiconductor devices is critically dependent on the distribution of guest molecules or atoms in a host matrix. One prominent example is that of organic light-emitting diode (OLED) displays containing phosphorescent emitters, now ubiquitous in handheld devices and high-end televisions. In such OLEDs the phosphorescent guest [normally an iridium(III)-based complex] is typically blended into a host matrix, and charge injection and transport, exciton formation and decay, and hence overall device performance are governed by the distribution of the emissive guest in the host. Here high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) is used with depth sectioning to reconstruct the 3D distribution of emissive iridium(III) complexes, fac-tris(2-phenylpyridine)iridium(III) [Ir(ppy)3], blended into the amorphous host material, tris(4-carbazoyl-9-ylphenyl)amine (TCTA), by resolving the position of each single iridium(III) ion. It is found that most Ir(ppy)3 complexes are clustered with at least one other, even at low concentrations, and that for films of 20 wt.% Ir(ppy)3 essentially all the complexes are interconnected. The results validate the morphology of blend films created using molecular dynamics simulations which mimic the evaporation film-forming process and are also consistent with the experimentally measured charge transport and photophysical properties.

PyThinFilm: Automated Molecular Dynamics Simulation Protocols for the Generation of Thin Film Morphologies

The performance of organic optoelectronic devices, such as organic light-emitting diodes (OLEDs) and organic solar cells (OSCs), is intrinsically related to the molecular-scale morphology of the thin films from which they are composed. However, the experimental characterization of morphology at the molecular level is challenging due to the often amorphous or at best semicrystalline nature of these films. Classical molecular modeling techniques, such as molecular dynamics (MD) simulation, are increasingly used to understand the relationship between morphology and the properties of thin-film devices. PyThinFilm (github.com/ATB-UQ/PyThinFilm) is an open-source Python package which allows fully automated MD simulations of thin film growth to be performed using vacuum and/or solution deposition processes. PyThinFilm utilizes the GROMACS simulation package in combination with interaction parameters from the Automated Topology Builder (atb.uq.edu.au). Here, PyThinFilm is described along with an overview of applications in which PyThinFilm has been used to study the thin films of organic semiconductor materials typically used in OLEDs and OSCs.

Enhancing Horizontal Ratio of Transition Dipole Moment in Homoleptic Ir Complexes for High Outcoupling Efficiency of Organic Light-Emitting Diodes

The light-emitting dipole orientation (EDO) of a phosphorescent emitter is a key to improving the external quantum efficiency (EQE) of organic light-emitting diodes (OLEDs) without structural modification of the device. Here, four homoleptic Ir complexes as a phosphorescent emitter are systematically designed based on the molecular structure of tris(2-phenylpyridine)iridium(III) (Ir(ppy)3 ) to control the EDO. Trimethylsilane, methyl, 2-methylpropyl, and cyclopentylmethyl group substituted to pyridine ring of the ligand contribute to the improvement of the EDO from 76.5% for Ir(ppy)3 to 87.5%. A linear relationship between the EDO and the aspect ratio (geometric anisotropy factor) is founded, implying the importance of the effective area for the nonbonding force between host and dopant molecules. Also, it is investigated that the EDO enhancement mainly originates from the vertical alignment of the C3 axis of molecule in the substrate axis rather than the change in the direction of the transition dipole alignment in the molecular axis. The optical simulation reveals that the outcoupling efficiency of phosphorescent OLEDs adopting new dopants reaches 38.4%. The green OLEDs exhibiting 28.3% of EQE, 103.2 cd A-1 of current efficiency, and 98.2 lm W-1 of power efficiency are demonstrated, which is understood to have little electrical loss.

Understanding the performance differences between solution and vacuum deposited OLEDs: A computational approach

Solution-processing of organic light-emitting diode films has potential advantages in terms of cost and scalability over vacuum-deposition for large area applications. However, solution processed small molecule films can have lower overall device performance. Here, novel molecular dynamics techniques are developed to enable faster simulation of solvent evaporation that occurs during solution processing and give films of thicknesses relevant to real devices. All-atom molecular dynamics simulations are then used in combination with kinetic Monte Carlo transport modeling to examine how differences in morphology stemming from solution or vacuum film deposition affect charge transport and exciton dynamics in films consisting of light-emitting bis(2-phenylpyridine)(acetylacetonate)iridium(III) [Ir(ppy)2(acac)] guest molecules in a 4,4′-bis( N-carbazolyl)biphenyl host. While the structures of the films deposited from vacuum and solution were found to differ, critically, only minor variations in the transport properties were predicted by the simulations even if trapped solvent was present.

A simple predictor of interface orientation of fluids of disk-like anisotropic particles and its implications for organic semiconductors

From classical molecular dynamics simulations, we identify a simple and general predictor of molecular orientation at solid and vapour interfaces of isotropic fluids of disk-like anisotropic particles based on their shape and interaction anisotropy. For a wide variety of inter-particle interactions, temperatures, and substrate types within the range of typical organic semiconductors and their processing conditions, we find remarkable universal scaling of the orientation at the interface with the free energy calculated from pair interactions between close-packed nearest neighbours and an empirically derived universal relationship between the entropy and the shape anisotropy and bulk volume fraction of the fluid particles. The face-on orientation of fluid particles at the solid interface is generally predicted to be the equilibrium structure, although the alignment can be controlled by tuning the particle shape and substrate type, while changing the strength of fluid-fluid interactions is likely to play a less effective role. At the vapour interface, only the side-on structure is predicted, and conditions for which the face-on structure may be preferred, such as low temperature, low interaction anisotropy, or low shape anisotropy, are likely to result in little orientation preference (due to the low anisotropy) or be associated with a phase transition to an anisotropic bulk phase for systems with interactions in the range of typical organic semiconductors. Based on these results, we propose a set of guidelines for the rational design and processing of organic semiconductors to achieve a target orientation at a solid or vapour interface.

Molecular Alignment of Homoleptic Iridium Phosphors in Organic Light-Emitting Diodes

The orientation of facial (fac) tris-cyclometalated iridium complexes in doped films prepared by vacuum deposition is investigated by altering the physical shape and electronic asymmetry in the molecular structure. Angle-dependent photoluminescence spectroscopy and Fourier-plane imaging microscopy show that the orientation of roughly spherical fac-tris(2-phenylpyridyl)iridium (Ir(ppy)₃ ) is isotropic, whereas complexes that are oblate spheroids, fac-tris(mesityl-2-phenyl-1H-imidazole)iridium (Ir(mi)₃ ) and fac-tris((3,5-dimethyl-[1,1'-biphenyl]-4-yl)-2-phenyl-1H-imidazole)iridium (Ir(mip)₃ ), have a net horizontal alignment of their transition dipole moments. Optical anisotropy factors of 0.26 and 0.15, respectively, are obtained from the latter complexes when doped into tris(4-(9H-carbazol-9-yl)phenyl)amine host thin films. The horizontal alignment is attributed to the favorable van der Waals interaction between the oblate Ir complexes and host material. Trifluoromethyl groups substituted on one polar face of the Ir(ppy)₃ and Ir(mi)₃ complexes introduce chemical asymmetries in the molecules at the expense of their oblate shapes. The anisotropy factors of films doped with these substituted derivatives are lower relative to the parent complexes, indicating that the fluorinated patches reinforce horizontal alignment during deposition. High efficiencies obtained from organic light emitting diodes prepared using the Ir dopants is attributed, in part, to improved outcoupling of electroluminescence brought about by molecular alignment.

Unraveling exciton processes in Ir(ppy)3:CBP OLED films upon photoexcitation

Emissive layers in phosphorescent organic light-emitting diodes commonly make use of guest-host blends such as Ir(ppy)₃:CBP to achieve high external quantum efficiencies. However, while the Ir(ppy)₃:CBP blend has been studied experimentally, crucial questions remain regarding how exciton diffusion is dependent on the distribution of the guest in the host, which can currently only be addressed at the atomic level via computational modeling. In this work, kinetic Monte Carlo simulations are utilized to gain insight into exciton diffusion in Ir(ppy)₃:CBP blend films. The effects of both guest concentration and exciton density on various system properties are analyzed, including the probability of singlet excitons being converted to triplets, and the probability of those triplets decaying radiatively. Significantly, these simulations suggest that triplet diffusion occurs almost exclusively via guest-guest Dexter transfer and that concentration quenching of triplets induced by guest-guest intermolecular dipole-dipole interactions has a negligible effect at high exciton densities due to the prevalence of triplet-triplet annihilation. Furthermore, results for vacuum deposited morphologies derived from molecular dynamics simulations are compared to the results obtained using a simple cubic lattice approximation with randomly distributed guest molecules. We show that while differences in host-based processes such as singlet diffusion are observed, overall, the results on the fate of the excitons are in good agreement for the two morphology types, particularly for guest-based processes at low guest concentrations where guest clustering is limited.

Evolution and Morphology of Thin Films Formed by Solvent Evaporation: An Organic Semiconductor Case Study

The crucial role played by the solution-vapor interface in determining the growth and morphology of an organic semiconductor thin film formed by solvent evaporation has been examined in atomic detail. Specifically, how the loss of individual solvent molecules from the surface of the solution induces solute assembly has been studied using molecular dynamics simulations. The system consisted of bis(2-phenylpyridine) (acetylacetonate)iridium(III) [Ir(ppy)₂(acac)] and 4,4'-bis(N-carbazolyl)-1,1'-biphenyl (CBP) in chloroform at 310 K. The simulations clearly indicate that (a) the system does not undergo uniform phase separation (spinodal decomposition), (b) solute aggregation initiates at the solution-vapor interface, (c) the distribution of solvent in the film is nonhomogeneous, (d) this nonhomogeneous distribution can induce preferential alignment of host molecules, and (e) a portion of the solvent likely remains trapped within the film. The work not only demonstrates the ability to directly model evaporation in atomic detail on the relevant length scales but also shows that atomistic simulations have the potential to shed new light on morphological properties of a wide range of organic semiconductor devices manufactured using solution-processing methods.

Self-Assembled Electret for Vibration-Based Power Generator

The vibration-based electret generators (EGs) for energy harvesting have been extensively studied because they can obtain electrical energy from ambient vibrations. EGs exhibit a sandwich structure of electrodes surrounding an air gap and an electret, which is a dielectric material with a quasi-permanent electrical charge or dipole polarisation. Various charging processes have been developed because the surface charge density (σ) of the electret determines the output power of the device. However, such processes are considered to constitute a key productivity-limiting factor from the mass production viewpoint, making their simplification or elimination a highly desired objective. Herein, a model EG that does not require any charging process by utilising the spontaneous orientation polarisation of 1,3,5-tris(1-phenyl-1H-benzimidazole-2-yl)benzene (TPBi) is demonstrated. The surface potential (V_sp) of an evaporated TPBi film has reached 30.2 V at a film thickness of 500 nm without using a charging process. The estimated σ of 1.7 mC m⁻² is comparable with that obtained using a conventional polymer-based electret after charging. Furthermore, V_sp is considerably stable in environmental conditions; thus, TPBi can be considered to be “self-assembled” electret (SAE). Application of SAE leads to developing an EG without requiring the charging process.

The interplay of interfaces, supramolecular assembly, and electronics in organic semiconductors

Organic semiconductors, which include a diverse range of carbon-based small molecules and polymers with interesting optoelectronic properties, offer many advantages over conventional inorganic semiconductors such as silicon and are growing in importance in electronic applications. Although these materials are now the basis of a lucrative industry in electronic displays, many promising applications such as photovoltaics remain largely untapped. One major impediment to more rapid development and widespread adoption of organic semiconductor technologies is that device performance is not easily predicted from the chemical structure of the constituent molecules. Fundamentally, this is because organic semiconductor molecules, unlike inorganic materials, interact by weak non-covalent forces, resulting in significant structural disorder that can strongly impact electronic properties. Nevertheless, directional forces between generally anisotropic organic-semiconductor molecules, combined with translational symmetry breaking at interfaces, can be exploited to control supramolecular order and consequent electronic properties in these materials. This review surveys recent advances in understanding of supramolecular assembly at organic-semiconductor interfaces and its impact on device properties in a number of applications, including transistors, light-emitting diodes, and photovoltaics. Recent progress and challenges in computer simulations of supramolecular assembly and orientational anisotropy at these interfaces is also addressed.

Simulation method for study on outcoupling characteristics of stratified anisotropic OLEDs

We derive explicit power dissipation functions for stratified anisotropic OLEDs based on a radiation model of dipole antennas inside anisotropic microcavity. The dipole field expressed by vector potential is expanded into plane waves whose coefficients are determined by scattering matrix method, and then an explicit expression is derived to calculate the energy flux through arbitrary interfaces. Taking advantage of the formulation, we can easily perform quantitative analysis on outcoupling characteristics of stratified anisotropic OLEDs, including outcoupling efficiency, normalized decay rate and angular emission profile. Simulations are carried out on a prototypic stratified OLED structure to verify the validity and capability of the proposed model. The dependencies of the outcoupling characteristics on various emission feature parameters, including dipole position, dipole orientation, and the intrinsic radiative quantum efficiency, are comprehensively evaluated and discussed. Results demonstrate that the optical anisotropy in different organic layers has nonnegligible influences on the far-field angular emission profile as well as outcoupling efficiency, and thereby highlight the necessity of our method. The proposed model can be expected to guide the optimal design of stratified anisotropic OLED devices, and help to solve the inverse outcoupling problem for determining the emission feature parameters.

Systematic Control of the Orientation of Organic Phosphorescent Pt Complexes in Thin Films for Increased Optical Outcoupling

Orienting light-emitting molecules relative to the substrate is an effective method to enhance the optical outcoupling of organic light-emitting devices. Platinum(II) phosphorescent complexes enable facile control of the molecular alignment due to their planar structures. Here, the orientation of Pt(II) complexes during the growth of emissive layers is controlled by two different methods: modifying the molecular structure and using structural templating. Molecules whose structures are modified by adjusting the diketonate ligand of the Pt complex, dibenzo-(f,h)quinoxaline Pt dipivaloylmethane, (dbx)Pt(dpm), show an ≈20% increased fraction of horizontally aligned transition dipole moments compared to (dbx)Pt(dpm) doped into a 4,4'-bis(N-carbazolyl)-1,1'-biphenyl, CBP, host. Alternatively, a template composed of highly ordered 3,4,9,10-perylenetetracarboxylic dianhydride monolayers is predeposited to drive the alignment of a subsequently deposited emissive layer comprising (2,3,7,8,12,13,17,18-octaethyl)-21H,23H-porphyrinplatinum(II) doped into triindolotriazine. This results in a 60% increase in horizontally aligned transition dipole moments compared to the film deposited in the absence of the template. The findings provide a systematic route for controlling molecular alignment during layer growth, and ultimately to increase the optical outcoupling in organic light-emitting diodes.

Realization of Highly Efficient Red Phosphorescence from Bis-Tridentate Iridium(III) Phosphors

Bis-tridentate Ir(III) metal complexes bring forth interesting photophysical properties, among which the orthogonal arranged, planar tridentate chelates could increase the emission efficiency due to the greater rigidity and, in the meantime, allow strong interligand stacking that could deteriorate the emission efficiency. We bypassed this hurdle by design of five bis-tridentate Ir(III) complexes (1-5), to which both of their monoanionic ancillary and dianionic chromophoric chelate were functionalized derivative of 2-pyrazolyl-6-phenylpyridine, i.e. pzpyphH₂ parent chelate. Hence, addition of phenyl substituent to the pyrazolyl fragment of pzpyphH₂ gave rise to the precursors of monoanionic chelate (A1H-A3H), on which the additional tert-butyl and/or methoxy groups were introduced at the selected positions for tuning their steric and electronic properties, while precursors of dianionic chelates was judiciously prepared with an isoquniolinyl central unit on pziqphH₂ in giving the red-shifted emission (cf. L1H₂ and L2H₂). Factors affected their photophysical properties were discussed by theoretical methods based on DFT and TD-DFT calculation, confirming that the T₁ excited state of all investigated Ir(III) complexes shows a mixed metal-to-ligand charge transfer (MLCT), intraligand charge transfer (ILCT), ligand-to-ligand charge transfer (LLCT), and ligand-centered (LC) transition character. In contrast, the poor quantum yield of 3 is due to the facilitation of the nonradiative decay in comparison to the radiative process. As for potential OLED applications, Ir(III) complex 2 gives superior performance with max. efficiencies of 28.17%, 41.25 cd·A^-1 and 37.03 lm·W^-1, CIE_x,y = 0.63, 0.37 at 50 mA cm^-2, and small efficiency roll-off.

Control of Molecular Orientation in Organic Semiconductor Films using Weak Hydrogen Bonds

Use of the intrinsic optoelectronic functions of organic semiconductor films has not yet reached its full potential, mainly because of the primitive methodology used to control the molecular aggregation state in amorphous films during vapor deposition. Here, a universal molecular engineering methodology is presented to control molecular orientation; this methodology strategically uses noncovalent, intermolecular weak hydrogen bonds in a series of oligopyridine derivatives. A key is to use two bipyridin-3-ylphenyl moieties, which form self-complementary intermolecular weak hydrogen bonds, and which do not induce unfavorable crystallization. Another key is to incorporate a planar anisotropic molecular shape by reducing the steric hindrance of the core structure for inducing π-π interactions. These synergetic effects enhance horizontal orientation in amorphous organic semiconductor films and significantly increasing electron mobility. Through this evaluation process, an oligopyridine derivative is selected as an electron-transporter, and successfully develops highly efficient and stable deep-red organic light-emitting devices as a proof-of-concept.

Calculating transition dipole moments of phosphorescent emitters for efficient organic light-emitting diodes

Quantum-chemical calculations show that the direction of the transition dipole moment of organometallic phosphorescent emitters is sensitive to molecular geometry.

High-Efficiency Deep-Blue-Emitting Organic Light-Emitting Diodes Based on Iridium(III) Carbene Complexes

High-efficiency pure blue phosphorescent organic light-emitting diodes (OLEDs) remain one of the grand challenges, principally because the emissive complexes employed either do not possess sufficiently high photoluminescence quantum yields or exhibit unsatisfactory Commission International de l'Éclairage (CIE) coordinates. Here two deep-blue-emitting homoleptic iridium(III) complexes are reported and OLEDs are demonstrated with CIE coordinates of (0.15, 0.05) and maximum external quantum efficiency of 13.4%, which decreases slightly to 12.5% at 100 cd m^-2 . They represent examples of the most efficient OLEDs surpassing the CIEy requirement of the National Television System Committee (NTSC) and the European Broadcasting Union (EBU). Emitter orientation contributes to the excellent device performance.

Morphology of a Bulk Heterojunction Photovoltaic Cell with Low Donor Concentration

Atomistic nonequilibrium molecular dynamics simulations have been used to model the morphology of small-molecule bulk heterojunction films formed by vapor deposition as used in organic photovoltaics. Films comprising C₆₀ and 1, 5, 10, and 50 wt % of 1,1-bis[4-bis(4-methylphenyl)aminophenyl]cyclohexane (TAPC) were compared to films of neat C₆₀. The simulations suggest that if holes can hop between donor molecules separated by as little as 1.2-1.5 nm, then a TAPC concentration of 5 wt % is sufficient to form a percolating donor network and facilitate charge extraction. The results provide an explanation for why low donor content organic photovoltaics can still have high efficiencies. In addition, the roughness, porosity, and crystallinity of the films were found to decrease with increasing TAPC content.