Solvent-Free N-Alkylation and Dehydrogenative Coupling Catalyzed by a Highly Active Pincer-Nickel Complex

Efficient net transfer-dehydrogenation of glycerol: NNN pincer-Mn and manganese chloride as a catalyst unlocks the effortless production of lactic acid and isopropanol

Herein, a series of pincer-Mn complexes based on bis(imino)pyridine ligands of the type R2NNN (R = tBu, iPr, Cy and Ph) were synthesized and characterized using various spectroscopic techniques. SCXRD studies revealed a trigonal bipyramidal geometry around the metal center in all the complexes. EPR spectroscopy confirmed the presence of high-spin Mn(II) centers with the consistent observation of sextets in EPR spectra. Additionally, solution magnetic moment measurement exhibited values ranging from 5.8 to 6.2 BM for all the complexes, which are in accordance with the theoretical value of 5.92 BM. HRMS analysis complemented structural characterization, showing fragments corresponding to various solvent adducts and derivatives of the complexes. Subsequently, the synthesized complexes were investigated for their catalytic activity in the transfer dehydrogenation of glycerol to lactic acid in the presence of acetone. Among the considered complexes, the catalyst Ph2NNNMnCl2 was found to be highly efficient. Remarkably, a yield of 92% LA was observed with >99% selectivity at 0.5 mol% loading of Ph2NNNMnCl2 in the presence of 1 equivalent of NaOH at 140 °C in 24 h, surpassing the yield obtained from its precursor MnCl2·4H2O, where a yield of 72% LA was observed with 96% selectivity under similar reaction conditions. This catalytic system was further investigated with a range of acceptors, and good to moderate yields were observed in most cases. Moreover, several control experiments, including reaction with PPh3, CS2 and Hg, highlighted the major involvement of molecular species in the reaction medium. Deuterium labelling studies indicated the involvement of C-H bond activation in the catalytic cycle but not in the rate-determining step (RDS), with a secondary kinetic isotope effect (KIE) of 1.25.

Nickel Pincer Complexes Catalyzed Sustainable Synthesis of 3,4-Dihydro-2H-1,2,4-benzothiadiazine-1,1-dioxides via Acceptorless Dehydrogenative Coupling of Primary Alcohols

We report the atom-economic and sustainable synthesis of biologically important 3,4-dihydro-2H-1,2,4-benzothiadiazine-1,1-dioxide (DHBD) derivatives from readily available aromatic primary alcohols and 2-aminobenzenesulfonamide catalyzed by nickel(II)-N∧N∧S pincer-type complexes. The synthesized nickel complexes have been well-studied by elemental and spectroscopic (FT-IR, NMR, and HRMS) analyses. The solid-state molecular structure of complex 2 has been authenticated by a single-crystal X-ray diffraction study. Furthermore, a series of 3,4-dihydro-2H-1,2,4-benzothiadiazine-1,1-dioxide derivatives have been synthesized (24 examples) utilizing a 3 mol % Ni(II) catalyst through acceptorless dehydrogenative coupling of benzyl alcohols with benzenesulfonamide. Gratifyingly, the catalytic protocol is highly selective with the yield up to 93% and produces eco-friendly water/hydrogen gas as byproducts. The control experiments and plausible mechanistic investigations indicate that the coupling of the in situ generated aldehyde with benzenesulfonamide leads to the desired product. In addition, a large-scale synthesis of one of the thiadiazine derivatives unveils the synthetic usefulness of the current methodology.

Electrocatalytic Oxidation of Methanol and Ethanol with 3d-Metal Based Anodic Electrocatalysts in Alkaline Media Using Carbon Based Electrode Assembly

Homogeneous electrocatalytic systems based on readily available, earth-abundant, inexpensive base metals Ni, Co, and Cr have been formulated for the electro-oxidation of alcohols (methanol and ethanol) that constitute a key half-cell component of direct alcohol fuel cells (DAFCs). Notably, excellent results were obtained for both methanol as well as ethanol electro-oxidation while operating with a half-cell assembly based on all-non-noble working and counter electrode systems consisting of glassy carbon and graphite rod, respectively. Using NaOH as the supporting electrolyte, Ni/Co/Cr metal salts and their bis(iminopyridine) complexes have been used as anodic electrocatalysts for the alcohol half-cell reactions, and among them, catalytic systems based on Co outperformed the corresponding systems based on Ni and Cr. The system comprising CoCl2.·6H2O [10 mM] + NaOH [6 M] at room temperature emerged as the best electrocatalyst for both methanol [5 M] electro-oxidation (ca. 522.5 ± 13.5 mA cm-2 at 1.4 V) and ethanol [5 M] electro-oxidation (ca. 209 ± 25 mA cm-2 at 1.34 V). It was observed that regardless of the starting alcohol, the end product is carbon dioxide, all of which gets trapped as sodium carbonate (up to 97% yield), thereby mitigating any possible hazards of greenhouse gas emission. Inferences obtained from FETEM, FESEM, and EDS analysis of both the electrolyte solution and residues deposited on the electrode surface provide evidence for the mostly homogeneous nature of the reaction mixture with the molecular catalyst being the major contributor toward the electrocatalytic activity apart from the minor role played by trace heterogeneous particles. The current cell assembly operating with non-noble working and counter electrodes utilizing a catalytic system based on an earth-abundant, base metal salt/complex that not only results in good half-cell current densities for high-energy power-source DAFCs but also generates high-value sodium carbonate offers an exciting avenue.

Acceptorless or Transfer Dehydrogenation of Glycerol Catalyzed by Base Metal Salt Cobaltous Chloride - Facile Access to Lactic Acid and Hydrogen or Isopropanol

The dehydrogenation of glycerol to lactic acid (LA) under both acceptorless and transfer dehydrogenation conditions using readily available, inexpensive, environmentally benign and earth-abundant base metal salt CoCl2 is reported here. The CoCl2 (0.5 mol %) catalyzed acceptorless dehydrogenation of glycerol at 160 °C in the presence of 0.75 equiv. of KOH, gave up to 33 % yield of LA in 44 % selectivity apart from hydrogen. Alternatively, with acetone as a sacrificial hydrogen acceptor, the CoCl2 (0.5 mol %) catalyzed dehydrogenation of glycerol at 160 °C in the presence of 1.1 equiv. of NaOt Bu resulted in up to 93 % LA with 96 % selectivity along with another value-added product isopropanol. Labelling studies revealed a modest secondary KIE of 1.68 which points to the involvement of C-H bond activation as a part of the catalytic cycle but not as a part of the rate-determining step. Catalyst poisoning experiments with PPh3 and CS2 are indicative of the homogeneous nature of the reaction mixture involving molecular species that are likely to be in-situ formed octahedral Co(II) as inferred from EPR, HRMS and Evans magnetic moment studies. The net transfer dehydrogenation activity is attributed to exclusive contribution from the alcoholysis step.

Cationic N,S-chelate half-sandwich iridium complexes: synthesis, characterization, anticancer and antiplasmodial activity

A series of pyrazole-based ligands and their corresponding cationic N,S-chelate half-sandwich iridium complexes were successfully synthesized. All iridium complexes exhibited good anticancer activity against the MCF-7 and MDA-MB-231 human breast cancer cells. The cytotoxic activity of unsubstituted iridium complex 1 is greater than that of cisplatin against MCF-7 cells. In addition, the cationic half-sandwich iridium complexes are also efficient in antiplasmodial study and complex 1 displayed the best activity as its IC50 was observed to be approximately 0.11 μM against the CQS-NF54 strain. These iridium complexes generally exhibited enhanced activity against the CQS-NF54 strain in comparison with that against the CQR-K1 strain. An "IC50 speed assay" investigation against the CQS-NF54 strain indicated complexes 1-3 to be fast-acting complexes that reach their lowest IC50 values within 16 hours. All complexes were fully characterized by IR spectroscopy, NMR spectroscopy, and elemental analysis, and the structure of the iridium complex was confirmed by single-crystal X-ray diffraction.

Synthesis, Antimicrobial and Antibiofilm Activities, and Molecular Docking Investigations of 2-(1H-Indol-3-yl)-1H-benzo[d]imidazole Derivatives

The treatment of many bacterial and fungal infections remains a problem due to increasing antibiotic resistance and biofilm formation by pathogens. In the present article, a methodology for the chemoselective synthesis of 2-(1H-indol-3-yl)-1H-benzo[d]imidazole derivatives is presented. We report on the antimicrobial activity of synthesized 2-(1H-indol-3-yl)-1H-benzo[d]imidazoles with significant activity against Staphylococcus aureus ATCC 25923, Staphylococcus aureus ATCC 43300 (MRSA), Mycobacterium smegmatis (mc(2)155/ATCC 700084), and Candida albicans ATCC 10231. High activity against staphylococci was shown by indolylbenzo[d]imidazoles 3ao and 3aq (minimum inhibitory concentration (MIC) < 1 µg/mL) and 3aa and 3ad (MIC 3.9-7.8 µg/mL). A low MIC was demonstrated by 2-(1H-indol-3-yl)-1-methyl-1H-benzo[d]imidazole (3ag) against M. smegmatis and against C. albicans (3.9 µg/mL and 3.9 µg/mL, respectively). 2-(5-Bromo-1H-indol-3-yl)-6,7-dimethyl-1H-benzo[d]imidazole (3aq) showed a low MIC of 3.9 µg/mL against C. albicans. Compounds 3aa, 3ad, 3ao, and 3aq exhibited excellent antibiofilm activity, inhibiting biofilm formation and killing cells in mature biofilms. Molecular docking analysis identified three potential interaction models for the investigated compounds, implicating (p)ppGpp synthetases/hydrolases, FtsZ proteins, or pyruvate kinases in their antibacterial action mechanism.

Recent advances in C/N-alkylation with alcohols through hydride transfer strategies

This review highlights the most recent reports in three powerful and ever-growing fields of borrowing hydrogen, acceptorless dehydrogenative coupling, and base-mediated hydride transfer strategies; which pave the way for generating reactive intermediates via shuttling hydrogen (or hydride) between starting materials without any need for an external hydrogen source to easily construct more complex structures. There is a thorough focus on diversifying the utility of alcohols for C/N-alkylation leading to the synthesis of branched ketones, alcohols, amines, indols, and 6-membered nitrogen-containing heterocycles such as pyridines and pyrimidines, various transformations with the focus on C-C and C-N bond-forming reactions via metal-based catalysis or metal-free approaches in this context to give a global overview in this area.

Ruthenium Complexes Bearing α-Diimine Ligands and Their Catalytic Applications in N-Alkylation of Amines, α-Alkylation of Ketones, and β-Alkylation of Secondary Alcohols

New Ru(II) complexes encompassing α-diimine ligands were synthesized by reacting ruthenium precursors with α-diimine hydrazones. The new ligands and Ru(II) complexes were analyzed by analytical and various spectroscopic methods. The molecular structures of L₁ and complexes 1, 3, and 4 were determined by single-crystal XRD studies. The results reveal a distorted octahedral geometry around the Ru(II) ion for all complexes. Moreover, the new ruthenium complexes show efficient catalytic activity toward the C-N and C-C coupling reaction involving alcohols. Particularly, complex 3 demonstrates effective conversion in N-alkylation of aromatic amines, α-alkylation of ketones, and β-alkylation of alcohols.

N-Alkylation of organonitrogen compounds catalyzed by methylene-linked bis-NHC half-sandwich ruthenium complexes

An efficient ruthenium-catalyzed N-alkylation of amines, amides and sulfonamides has been developed employing novel pentamethylcyclopentadienylruthenium(II) complexes bearing the methylene linked bis(NHC) ligand bis(3-methylimidazol-2-ylidene)methane. The acetonitrile complex 2 has proven particularly effective with a broad range of substrates with low catalyst loading (0.1-2.5 mol%) and high functional group tolerance under mild conditions. A total of 52 N-alkylated organonitrogen compounds including biologically relevant scaffolds were synthesized from (hetero)aromatic and aliphatic amines, amides and sulfonamides using alcohols or diols as alkylating agents in up to 99% isolated yield, even on gram-scale reactions. In the case of sulfonamides, it is the first example of N-alkylation employing a transition-metal complex bearing NHC ligands.

Four- and five-coordinate nickel(ii) complexes bearing new diphosphine–phosphonite and triphosphine–phosphite ligands: catalysts for N-alkylation of amines

A series of nickel(ii) complexes supported by the new tridentate P3 and tetradentate P4 ligands act efficiently as catalysts for the N-alkylation of primary amines with alcohols.

Rational design of pincer-nickel complexes for catalytic cyanomethylation of benzaldehyde: A systematic DFT study

The current study dwells upon the efforts to computationally probe a phosphine-free pincer-nickel complex that would demonstrate an efficiency better than the reported phosphine-based pincer-nickel complex (^iPr2 POCN^Et2 )Ni(CH₂ CN) for cyanomethylation reaction. For this purpose, the mechanism of cyanomethylation of benzaldehyde was studied quantum mechanically for a series of 11 pincer-nickel complexes. The energetics of various intermediates and transition states involved in the catalytic cycle for each catalyst was compared with the corresponding energetics of the Miller's catalyst (^iPr2 POCN^Et2 )Ni(CH₂ CN) that is reported to accomplish the cyanomethylation at room temperature. While pincer complexes (^iPr4 NNN)Ni(CH₂ CN) and (^iPr4 NCN)Ni(CH₂ CN) containing strong σ-donating amines were found to fare poorly, pincer-nickel complexes (^iPr2 NCN)Ni(CH₂ CN) and (^dm PheboxNCN)Ni(CH₂ CN) based on weaker σ-donating imines had energetics more favorable than the reported efficient catalyst (^iPr2 POCN^Et2 )Ni(CH₂ CN). While strong trans-influencing C as the pincer central atom was found to be pivotal for lowering the cyanomethylation kinetics, presence of a poor trans-influencing N proved to be detrimental on the overall energetics.

Recent advances in nickel-catalyzed C-C and C-N bond formation via HA and ADC reactions

In recent times, earth-abundant 3d-transition-metal catalysts have attracted much attention in contemporary catalysis. They have been widely employed as suitable alternatives to their counterparts noble metals. In particular, nickel catalysts provide distinctive redox properties; thus, their efficiency in sustainable organic transformations is manifold. In this review article, recent advances in nickel-catalyzed hydrogen auto-transfer (HA) and acceptorless dehydrogenative coupling (ADC) reactions for the construction of C-C and C-N bonds have been discussed.

[(PPh3)2NiCl2]-Catalyzed C-N Bond Formation Reaction via Borrowing Hydrogen Strategy: Access to Diverse Secondary Amines and Quinolines

Commercially available [(PPh₃)₂NiCl₂] was found to be an efficient catalyst for the mono-N-alkylation of (hetero)aromatic amines, employing alcohols to deliver diverse secondary amines, including the drug intermediates chloropyramine (5b) and mepyramine (5c), in excellent yields (up to 97%) via the borrowing hydrogen strategy. This method shows a superior activity (TON up to 10000) with a broad substrate scope at a low catalyst loading of 1 mol % and a short reaction time. Further, this strategy is also successful in accessing various quinoline derivatives following the acceptorless dehydrogenation pathway.

N-Alkylation of Amines with Alcohols Catalyzed by Manganese(II) Chloride or Bromopentacarbonylmanganese(I)

A manganese-catalyzed N-alkylation reaction of amines with alcohols via hydrogen autotransfer strategy has been demonstrated. The developed practical catalytic system including an inexpensive, nontoxic, commercially available MnCl₂ or MnBr(CO)₅ as the metal salt and triphenylphosphine as a ligand provides access to diverse aromatic, heteroaromatic, and aliphatic secondary amines in moderate-to-high yields. In addition, this operationally simple protocol is scalable to the gram level and suitable for synthesizing heterocycles such as indole and resveratrol-derived amines known to be active for Alzheimer's disease.

Ruthenium(II) complexes with N-heterocyclic carbene-phosphine ligands for the N-alkylation of amines with alcohols

Metal hydride complexes are key intermediates for N-alkylation of amines with alcohols by the borrowing hydrogen/hydrogen autotransfer (BH/HA) strategy. Reactivity tuning of metal hydride complexes could adjust the dehydrogenation of alcohols and the hydrogenation of imines. Herein we report ruthenium(ii) complexes with hetero-bidentate N-heterocyclic carbene (NHC)-phosphine ligands, which realize smart pathway selection in the N-alkylated reaction via reactivity tuning of [Ru-H] species by hetero-bidentate ligands. In particular, complex 6cb with a phenyl wingtip group and BArF- counter anion, is shown to be one of the most efficient pre-catalysts for this transformation (temperature is as low as 70 °C, neat conditions and catalyst loading is as low as 0.25 mol%). A large variety of (hetero)aromatic amines and primary alcohols were efficiently converted into mono-N-alkylated amines in good to excellent isolated yields. Notably, aliphatic amines, challenging methanol and diamines could also be transformed into the desired products. Detailed control experiments and density functional theory (DFT) calculations provide insights to understand the mechanism and the smart pathway selection via [Ru-H] species in this process.

Recent advances in pincer-nickel catalyzed reactions

Organometallic catalysts have played a key role in accomplishing numerous synthetically valuable organic transformations that are either otherwise not possible or inefficient. The use of precious, sparse and toxic 4d and 5d metals are an apparent downside of several such catalytic systems despite their immense success over the last several decades. The use of complexes containing Earth-abundant, inexpensive and less hazardous 3d metals, such as nickel, as catalysts for organic transformations has been an emerging field in recent times. In particular, the versatile nature of the corresponding pincer-metal complexes, which offers great control of their reactivity via countless variations, has garnered great interest among organometallic chemists who are looking for greener and cheaper alternatives. In this context, the current review attempts to provide a glimpse of recent developments in the chemistry of pincer-nickel catalyzed reactions. Notably, there have been examples of pincer-nickel catalyzed reactions involving two electron changes via purely organometallic mechanisms that are strikingly similar to those observed with heavier Pd and Pt analogues. On the other hand, there have been distinct differences where the pincer-nickel complexes catalyze single-electron radical reactions. The applicability of pincer-nickel complexes in catalyzing cross-coupling reactions, oxidation reactions, (de)hydrogenation reactions, dehydrogenative coupling, hydrosilylation, hydroboration, C-H activation and carbon dioxide functionalization has been reviewed here from synthesis and mechanistic points of view. The flurry of global pincer-nickel related activities offer promising avenues in catalyzing synthetically valuable organic transformations.

Dehydrogenative alcohol coupling and one-pot cross metathesis/dehydrogenative coupling reactions of alcohols using Hoveyda–Grubbs catalysts

Grubbs catalysts are shown to catalyze one-pot cross-metathesis/dehydrogenative alcohol coupling reactions in an efficient manner.

Homogeneous Nickel-Catalyzed Sustainable Synthesis of Quinoline and Quinoxaline under Aerobic Conditions

Dehydrogenative coupling-based reactions have emerged as an efficient route toward the synthesis of a plethora of heterocyclic rings. Herein, we report an efficacious, nickel-catalyzed synthesis of two important heterocycles such as quinoline and quinoxaline. The catalyst is molecularly defined, is phosphine-free, and can operate at a mild reaction temperature of 80 °C. Both the heterocycles can be easily assembled via double dehydrogenative coupling, starting from 2-aminobenzyl alcohol/1-phenylethanol and diamine/diol, respectively, in a shorter span of reaction time. This environmentally benign synthetic protocol employing an inexpensive catalyst can rival many other transition-metal systems that have been developed for the fabrication of two putative heterocycles. Mechanistically, the dehydrogenation of secondary alcohol follows clean pseudo-first-order kinetics and exhibits a sizable kinetic isotope effect. Intriguingly, this catalyst provides an example of storing the trapped hydrogen in the ligand backbone, avoiding metal-hydride formation. Easy regeneration of the oxidized form of the catalyst under aerobic/O₂ oxidation makes this protocol eco-friendly and easy to handle.

Cyclometalated Iridium Complex-Catalyzed N-Alkylation of Amines with Alcohols via Borrowing Hydrogen in Aqueous Media

This paper develops a methodology for cyclometalated iridium complex-catalyzed N-alkylation of amines with alcohols via borrowing hydrogen in the aqueous phase. The cyclometalated iridium catalyst-mediated N-alkylation of amines with alcohols displays high activity (S/C up to 10,000 and yield up to 96%) and ratio of amine/imine (up to >99:1) in a broad range of substrates (up to 46 examples) using water as the green and eco-friendly solvent. Most importantly, this transformation is simple, efficient, and can be performed at a gram scale, showcasing its potential for industrially synthesizing N-alkylamine compounds.