Naphthyl-Derived Orthometalated RuII-NHC Complexes: Effect of the NHC Donors and/or Substitution Pattern on Their Synthesis and Catalytic Activity

Facile synthesis and bonding of 4-ferrocenyl-1,2,4-triazol-5-ylidene complexes

Ferrocene-substituted carbenes have emerged as attractive, redox-active ligands. However, among the compounds studied to date, ferrocenylated 1,2,4-triazol-5-ylidenes, which are closely related to the archetypal imidazol-2-ylidenes, are still unknown. Here, we demonstrate that the triazolium salt [CHN(Me)NCHN(Fc)]I (2; Fc = ferrocenyl), obtained by alkylation of 4-ferrocenyl-4H-1,2,4-triazole (1) with MeI, reacts selectively with metal alkoxide/hydroxide precursors [(cod)Rh(OMe)]2 and [(IPr)Au(OH)] (cod = cycloocta-1,5-diene, IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) to produce the ferrocene-substituted 1,2,4-triazol-5-ylidene complexes [(cod)RhI{CN(Me)NCHN(Fc)}] and [(IPr)Au{CN(Me)NCHN(Fc)}]I in good yields. The complexes were characterised by NMR and IR spectroscopy, mass spectrometry, cyclic voltammetry, and single-crystal X-ray diffraction analysis. Density function theory (DFT) calculations were used to rationalise the electrochemical behaviour of the carbene complexes and to elucidate the bonding situation in these compounds. An analysis using intrinsic bond orbitals (IBOs) revealed that the 1,2,4-triazol-5-ylidene ligand exerted a strong trans influence and showed a synergistic stabilisation by the negative inductive and positive π-donor effects of the nitrogen atoms adjacent to the carbene carbon atom; these effects were enhanced by conjugation with the CHN bond at the exterior, similar to that in imidazol-2-ylidenes.

(Benz)imidazo[1,2-a]quinolinium Salts: Access via Unprecedented Regiospecific non-AAIPEX Strategy and Study of Their Tunable Properties

An unprecedented non-AAIPEX protocol has been developed to access diverse monosubstituted cationic polycyclic heteroaromatic compounds (cPHACs) from the readily available azolium salts and phenacyl bromides via Ru(II)-catalyzed tandem annulation cum aromatization. This atom-economic protocol executes a range of intermediate steps e. g. double C-H activation, nucleophilic addition, annulation, and dehydration cum aromatization in one-pot manner under the generation of H2O as the sole byproduct. Moreover, the systematic tunability of photo-physical and electrochemical properties of these new class of cPHACs can be authenticated from the DFT calculated frontier molecular orbital energies that might be beneficial for their potential applications in optoelectronics and DNA intercalation.

Ruthenium(II) Complexes of a Xanthene-Spanned Dicarbene Ligand

Octahedral ruthenium(II) complexes of a xanthene-di(N-heterocyclic carbene) ancillary ligand (XdC) have been prepared and structurally characterized. Examples catalyze the transfer hydrogenation of ketones {[Ru(CO)I2(C,O,C'-XdC)] (1) and [Ru(CO)(MeCN)2(C,O,C'-XdC)]2+ (22+)} and the selective electrochemical reduction of CO2 to CO {[Ru(N,N'-bpy)(CO)(C,O,C'-XdC)]2+ (32+) at 0.40 V overpotential in MeCN-H2O (1 M)}. The reaction of 1 with KBEt3H afforded isomers of [(C,C'-XdC)Ru(μ-H)(H)]2 dimers, which are stable to reductive elimination of the XdC ligand, thereby suggesting similar (XdC)Rh(coligand)(H)x species may be viable intermediates in catalyses. The electrochemical reduction of CO2 involves a double reduction of 32+ to 3••, which has been characterized by IR-SEC and DFT calculations. The DFT calculations suggest the Ru-Oxanth bond breaks in 3••, opening a metal site for CO2 binding with selectivity over protons enabled by the diffuse nature of the HOMO delocalized over the metal and the bipyridine and carbonyl coligands. The results point to the promise of metal complexes of flexible and hemilabile xanthene-(NHC)2 ancillary ligands in catalysis.

Base-catalyzed Effective C2-Amidation of Azolium Salts Using Isocyanates under Mild Conditions

An unprecedented base-catalyzed hydroarylation of isocyanates with azolium salts was developed, which follows a simple reaction pathway and provided facile access to diverse C2-amidated azolium salts under mild conditions. Importantly, this methodology can also be applied for the successive C2-amidation of a bisimidazolium salt with two different isocyanates to provide the corresponding unsymmetrically substituted bisamide derivatives. Notably, the obtained amidated salts can also serve as a prominent carbene surrogate for the synthesis of metal-NHC complexes.

A naphthalene-based heterobimetallic triazolylidene IrIII/PdII complex: regioselective to regiospecific C-H activation, tandem catalysis and a copper-free Sonogashira reaction

Heterobimetallic complexes featuring mesoionic carbene (MIC) donor ligands are gaining enormous popularity in tandem catalysis owing to the combined action of two different metal centers during catalysis. A rare version of the heterobimetallic Pd^II/Ir^III complex possessing a cyclometalated mesoionic carbene (MIC) ligand is presented along with the analogous homodinuclear Pd^II complex. A sterically controlled regiospecific cyclometalation towards the formation of a six-membered ring complex over a five-membered ring complex has been performed using a naphthalene-based bis-MIC ligand platform. The interplay between regioselective vs. regiospecific C-H bond activation for the synthesis of cyclometalated Ir^III complexes has also been demonstrated using the corresponding naphthyl-derived mono-imidazolylidene ligand. Both homodinuclear Pd^II and heterobimetallic Pd^II/Ir^III complexes have been characterized using standard spectroscopic techniques including ¹H, ¹³C{¹H}, 2D correlation NMR spectroscopy and ESI mass spectrometry. The structure of the cyclometalated heterobimetallic complex has been established by single crystal XRD. The heterobimetallic complex has been employed as a pre-catalyst in the tandem Suzuki-Miyaura/transfer hydrogenation reaction and the homobimetallic Pd^II complex has been successfully employed as a catalyst in both the Sonogashira coupling and α-arylation of 1-methyl-2-oxindole.

Introducing Ion Mobility Mass Spectrometry to Identify Site-Selective C-H Bond Activation in N-Heterocyclic Carbene Metal Complexes

The activation of C-H bonds in a selective manner still constitutes a major challenge from a synthetic point of view; thus, it remains an active area of fundamental and applied research. Herein, we introduce ion mobility spectrometry mass spectrometry-based (IM-MS) approaches to uncover site-selective C-H bond activation in a series of metal complexes of general formula [(NHC)LMCl]⁺ (NHC = N-heterocyclic carbene; L = pentamethylcyclopentadiene (Cp*) or p-cymene; M = Pd, Ru, and Ir). The C-H bond activation at the N-bound groups of the NHC ligand is promoted upon collision induced dissociation (CID). The identification of the resulting [(NHC-H)LM]⁺ isomers relies on the distinctive topology that such cyclometalated isomers adopt upon site-selective C-H bond activation. Such topological differences can be reliably evidenced as different mobility peaks in their respective CID-IM mass spectra. Alternative isomers are also identified via dehydrogenation at the Cp*/p-cymene (L) ligands to afford [(NHC)(L-H)M]⁺. The fragmentation of the ion mobility-resolved peaks is also investigated by CID-IM-CID. It enables the assignment of mobility peaks to the specific isomers formed from C(sp²)-H or C(sp³)-H bond activation and distinguishes them from the Cp*/p-cymene (L) dehydrogenation isomers. The conformational change of the NHC ligands upon C-H bond activation, concomitant with cyclometalation, is also discussed on the basis of the estimated collision cross section (CCS). A unique conformation change of the pyrene-tagged NHC members is identified that involves the reorientation of the NHC ring accompanied by a folding of the pyrene moiety.

Electronically tuneable orthometalated RuII–NHC complexes as efficient catalysts for C–C and C–N bond formations via borrowing hydrogen strategy

A series of simple and electronically tuneable cyclometalated RuII–NHC complexes have been explored as efficient catalysts for various C–C/N bond forming reactions via a BH methodology.

Recent Advances in Catalysis Involving Bidentate N-Heterocyclic Carbene Ligands

Since the discovery of persistent carbenes by the isolation of 1,3-di-l-adamantylimidazol-2-ylidene by Arduengo and coworkers, we witnessed a fast growth in the design and applications of this class of ligands and their metal complexes. Modular synthesis and ease of electronic and steric adjustability made this class of sigma donors highly popular among chemists. While the nature of the metal-carbon bond in transition metal complexes bearing N-heterocyclic carbenes (NHCs) is predominantly considered to be neutral sigma or dative bonds, the strength of the bond is highly dependent on the energy match between the highest occupied molecular orbital (HOMO) of the NHC ligand and that of the metal ion. Because of their versatility, the coordination chemistry of NHC ligands with was explored with almost all transition metal ions. Other than the transition metals, NHCs are also capable of establishing a chemical bond with the main group elements. The advances in the catalytic applications of the NHC ligands linked with a second tether are discussed. For clarity, more frequently targeted catalytic reactions are considered first. Carbon-carbon coupling reactions, transfer hydrogenation of alkenes and carbonyl compounds, ketone hydrosilylation, and chiral catalysis are among highly popular reactions. Areas where the efficacy of the NHC based catalytic systems were explored to a lesser extent include CO2 reduction, C-H borylation, alkyl amination, and hydroamination reactions. Furthermore, the synthesis and applications of transition metal complexes are covered.

Recent Advances in the Syntheses and Catalytic Applications of Homonuclear Ru-, Rh-, and Ir-Complexes of CNHC ^C Cyclometalated Ligands

In the past few decades, chemistry of cyclometalated species has gained momentum with increased applications in several areas of scientific developments. Cyclometalation reactions result in the formation of stable metallacycles through the generation of metal-carbon covalent bonds by activating the unreactive Csp² -H or Csp³ -H bonds. The extra stability gained by the formation of metallacycles enhances their applicability scopes especially in the area of homogeneous catalysis. In the recent research development in this area, NHC ligands (strong σ-donor and generally, weak π-acceptor) have been found to be one of the most suitable candidates for the intramolecular C-H activation process which leads to the cyclometalated species. The growth in the area of cyclometalation chemistry that started in the late 20^th century is still continuing and in the past few decades, various examples of NHC derived transition metal-based cyclometalated complexes came into the picture. As covering all the reported literatures in this area (includes mainly late transition metals) will exceed the limits of minireview, we restricted ourselves to the recent (2015 - May 2021) examples of the most common Ru-, Rh-, and Ir-based C_NHC ^C cyclometalated complexes and their applications in various homogeneous catalytic conversions such as transfer hydrogenation, amidation, oxidation of alcohols, annulations, and so forth.