Hydrosilylation of Aldehydes and Formates Using a Dimeric Manganese Precatalyst

Hydrosilylation of Terminal Alkynes Catalyzed by an Air-Stable Manganese-NHC Complex

In recent years, catalysis with base metal manganese has received a significant amount of interest. Catalysis with manganese complexes having N-heterocyclic carbenes (NHCs) is relatively underdeveloped in comparison to the extensively investigated manganese catalysts possessing pincer ligands (particularly phosphine-based ligands). Herein, we describe the synthesis of two imidazolium salts decorated with picolyl arms (L₁ and L₂) as NHC precursors. Facile coordination of L₁ and L₂ with MnBr(CO)₅ in the presence of a base resulted in the formation manganese(I)-NHC complexes (1 and 2) as an air-stable solid in good isolated yield. Single-crystal X-ray analysis revealed the structure of the cationic complexes [Mn(CO)₃(NHC)][PF₆] with tridentate N,C,N binding of the NHC ligand in a facile fashion. Along with a few known manganese(I) complexes, these Mn(I)-NHC complexes 1 and 2 were tested for the hydrosilylation of terminal alkynes. Complex 1 was proved to be an effective catalyst for the hydrosilylation of terminal alkynes with good selectivity toward the less thermodynamically stable β-(Z)-vinylsilanes. This method provided good regioselectivity (anti-Markovnikov addition) and stereoselectivity (β-(Z)-product). Experimental evidence suggested that the present hydrosilylation pathway involved an organometallic mechanism with manganese(I)-silyl species as a possible reactive intermediate.

Manganese Salan Complexes as Catalysts for Hydrosilylation of Aldehydes and Ketones

Manganese has attracted significant recent attention due to its abundance, low toxicity, and versatility in catalysis. In the present study, a series of manganese (III) complexes supported by salan ligands have been synthesized and characterized, and their activity as catalysts in the hydrosilylation of carbonyl compounds was examined. While manganese (III) chloride complexes exhibited minimal catalytic efficacy without activation of silver perchlorate, manganese (III) azide complexes showed good activity in the hydrosilylation of carbonyl compounds. Under optimized reaction conditions, several types of aldehydes and ketones could be reduced with good yields and tolerance to a variety of functional groups. The possible mechanisms of silane activation and hydrosilylation were discussed in light of relevant experimental observations.

Sustainable preparation of aminosilane monomers, oligomers, and polymers through Si-N dehydrocoupling catalysis

This article covers historical and recent efforts to catalyse the dehydrocoupling of amines and silanes, a direct method for Si-N bond formation that offers hydrogen as a byproduct. In some applications, this transformation can be used as a sustainable replacement for traditional aminosilane synthesis, which demands corrosive chlorosilanes while generating one equivalent of ammonium salt waste for each Si-N bond that is formed. These advantages have driven the development of Si-N dehydrocoupling catalysts that span the periodic table, affording mechanistic insight that has led to advances in efficiency and selectivity. Given the divergence in precursors being used, characterization methods being relied on, and applications being targeted, this article highlights the formation of monomeric aminosilanes separately from oligomeric and polymeric aminosilanes. A recent study that allowed for the manganese catalysed synthesis of perhydropolysilazane and commercial chemical vapor deposition precursors is featured, and key opportunities for advancing the field of Si-N dehydrocoupling catalysis are discussed.

Manganese-catalyzed hydrogenation, dehydrogenation, and hydroelementation reactions

The emerging field of organometallic catalysis has shifted towards research on Earth-abundant transition metals due to their ready availability, economic advantage, and novel properties. In this case, manganese, the third most abundant transition-metal in the Earth's crust, has emerged as one of the leading competitors. Accordingly, a large number of molecularly-defined Mn-complexes has been synthesized and employed for hydrogenation, dehydrogenation, and hydroelementation reactions. In this regard, catalyst design is based on three pillars, namely, metal-ligand bifunctionality, ligand hemilability, and redox activity. Indeed, the developed catalysts not only differ in the number of chelating atoms they possess but also their working principles, thereby leading to different turnover numbers for product molecules. Hence, the critical assessment of molecularly defined manganese catalysts in terms of chelating atoms, reaction conditions, mechanistic pathway, and product turnover number is significant. Herein, we analyze manganese complexes for their catalytic activity, versatility to allow multiple transformations and their routes to convert substrates to target molecules. This article will also be helpful to get significant insight into ligand design, thereby aiding catalysis design.

Comparing the Electronic Structure of Iron, Cobalt, and Nickel Compounds That Feature a Phosphine-Substituted Bis(imino)pyridine Chelate

It was recently discovered that (^Ph2PPrPDI)Mn (PDI = pyridine diimine) exists as a superposition of low-spin Mn(II) that is supported by a PDI dianion and intermediate-spin Mn(II) that is antiferromagnetically coupled to a triplet PDI dianion, a finding that encouraged the synthesis and electronic structure evaluation of late first row metal variants that feature the same chelate. The addition of ^Ph2PPrPDI to FeBr₂ resulted in bromide dissociation and the formation of [(^Ph2PPrPDI)FeBr][Br]. Reduction of this precursor using excess sodium amalgam afforded (^Ph2PPrPDI)Fe, which possesses an Fe(II) center that is supported by a dianionic PDI ligand. Similarly, reduction of a premixed solution of ^Ph2PPrPDI and CoCl₂ yielded the cobalt analog, (^Ph2PPrPDI)Co. EPR spectroscopy and density functional theory calculations revealed that this compound features a high-spin Co(I) center that is antiferromagnetically coupled to a PDI radical anion. The addition of ^Ph2PPrPDI to Ni(COD)₂ resulted in ligand displacement and the formation of (^Ph2PPrPDI)Ni, which was found to possess a pendent phosphine group. Single-crystal X-ray diffraction, CASSCF calculations, and EPR spectroscopy indicate that (^Ph2PPrPDI)Ni is best described as having a Ni(II)-PDI^2- configuration. The electronic differences between these compounds are highlighted, and a computational analysis of ^Ph2PPrPDI denticity has revealed the thermodynamic penalties associated with phosphine dissociation from 5-coordinate (^Ph2PPrPDI)Mn, (^Ph2PPrPDI)Fe, and (^Ph2PPrPDI)Co.

The Rise of Manganese-Catalyzed Reduction Reactions

Recent developments in manganese-catalyzed reducing transformations—hydrosilylation, hydroboration, hydrogenation, and transfer hydrogenation—are reviewed herein. Over the past half a decade (i.e., 2016 to the present), more than 115 research publications have been reported in these fields. Novel organometallic compounds and new reduction transformations have been discovered and further developed. Significant challenges that had historically acted as barriers for the use of manganese catalysts in reduction reactions are slowly being broken down. This review will hopefully assist in developing this research area, by presenting a clear and concise overview of the catalyst structures and substrate transformations published so far.

1 Introduction

2 Hydrosilylation

3 Hydroboration

4 Hydrogenation

5 Transfer Hydrogenation

6 Conclusion and Perspective

An Aryl Diimine Cobalt(I) Catalyst for Carbonyl Hydrosilylation

Through the application of a redox-innocent aryl diimine chelate, the discovery and utilization of a cobalt catalyst, (Ph2PPrADI)Co, that exhibits carbonyl hydrosilylation turnover frequencies of up to 330 s–1 is...

Hydrosilylation of Aldehydes and Ketones Catalyzed by a 2-Iminopyrrolyl Alkyl-Manganese(II) Complex

A well-defined and very active single-component manganese(II) catalyst system for the hydrosilylation of aldehydes and ketones is presented. First, the reaction of 5-(2,4,6-iPr₃C₆H₂)-2-[N-(2,6-iPr₂C₆H₃)formimino]pyrrolyl potassium (KL) and [MnCl₂(Py)₂] afforded the binuclear 2-iminopyrrolyl manganese(II) pyridine chloride complex [Mn₂{κ²N,N'-5-(2,4,6-iPr₃C₆H₂)-NC₄H₂-2-C(H)═N(2,6-iPr₂C₆H₃)}₂(Py)₂(μ-Cl)₂] 1. Subsequently, the alkylation reaction of complex 1 with LiCH₂SiMe₃ afforded the respective (trimethylsilyl)methyl-Mn(II) complex [Mn{κ²N,N'-5-(2,4,6-iPr₃C₆H₂)-NC₄H₂-2-C(H)═N(2,6-iPr₂C₆H₃)}(Py)CH₂SiMe₃] 2 in a good yield. Complexes 1 and 2 were characterized by elemental analysis, ¹H NMR spectroscopy, Evans' method, FTIR spectroscopy, and single-crystal X-ray diffraction. While the crystal structure of complex 1 has been identified as a binuclear entity, in which the Mn(II) centers present pentacoordinate coordination spheres, that of complex 2 corresponds to a monomer with a distorted tetrahedral coordination geometry. Complex 2 proved to be a very active precatalyst for the atom-economic hydrosilylation of several aldehydes and ketones under very mild conditions, with a maximum turnover frequency of 95 min^-1, via a silyl-Mn(II) mechanistic route, as asserted by a combination of experimental and theoretical efforts, the respective silanes were cleanly converted to the respective alcoholic products in high yields.

Phosphorous-substituted redox-active ligands in base metal hydrosilylation catalysis

This article highlights the utilization of phosphine-containing redox-active ligands for efficient hydrosilylation catalysis. Manganese, iron, cobalt, and nickel precatalysts featuring these chelates have been described and leading activities for carbonyl, carboxylate, and ester C-O bond hydrosilylation have been achieved. Mechanistic studies have provided insight into the importance of phosphine hemilability.

Manganese-Catalyzed Hydroborations with Broad Scope

Reductive transformations of easily available oxidized matter are at the heart of synthetic manipulation and chemical valorization. The applications of catalytic hydrofunctionalization benefit from the use of liquid reducing agents and operationally facile setups. Metal‐catalyzed hydroborations provide a highly prolific platform for reductive valorizations of stable C=X electrophiles. Here, we report an especially facile, broad‐scope reduction of various functions including carbonyls, carboxylates, pyridines, carbodiimides, and carbonates under very mild conditions with the inexpensive pre‐catalyst Mn(hmds)₂. The reaction could be successfully applied to depolymerizations.

Molecular Zinc Hydride Cations [ZnH]+ : Synthesis, Structure, and CO2 Hydrosilylation Catalysis

Protonolysis of [ZnH2 ]n with the conjugated Brønsted acid of the bidentate diamine TMEDA (N,N,N',N'-tetramethylethane-1,2-diamine) and TEEDA (N,N,N',N'-tetraethylethane-1,2-diamine) gave the zinc hydride cation [(L2 )ZnH]+ , isolable either as the mononuclear THF adduct [(L2 )ZnH(thf)]+ [BArF 4 ]- (L2 =TMEDA; BArF 4 - =[B(3,5-(CF3 )2 -C6 H3 )4 ]- ) or as the dimer [{(L2 )Zn)}2 (μ-H)2 ]2+ [BArF 4 ]- 2 (L2 =TEEDA). In contrast to [ZnH2 ]n , the cationic zinc hydrides are thermally stable and soluble in THF. [(L2 )ZnH]+ was also shown to form di- and trinuclear adducts of the elusive neutral [(L2 )ZnH2 ]. All hydride-containing cations readily inserted CO2 to give the corresponding formate complexes. [(TMEDA)ZnH]+ [BArF 4 ]- catalyzed the hydrosilylation of CO2 with tertiary hydrosilanes to give stepwise formoxy silane, methyl formate, and methoxy silane. The unexpected formation of methyl formate was shown to result from the zinc-catalyzed transesterification of methoxy silane with formoxy silane, which was eventually converted into methoxy silane as well.

Manganese and rhenium-catalyzed selective reduction of esters to aldehydes with hydrosilanes

The selective reduction of esters to aldehydes, via the formation of stable alkyl silyl acetals, was, for the first time, achieved with both manganese, -Mn₂(CO)₁₀- and rhenium -Re₂(CO)₁₀- catalysts in the presence of triethylsilane as reductant. These two methods provide a direct access to a large variety of aliphatic and aromatic alkyl silyl acetals (30 examples) and to the corresponding aldehydes (13 examples) upon hydrolysis. The reactions proceeded in excellent yields and high selectivity at room temperature under photo-irradiation conditions (LED, 365 nm, 40 W, 9 h).

Hydrosilylation of Esters Catalyzed by Bisphosphine Manganese(I) Complex: Selective Transformation of Esters to Alcohols

Selective and efficient hydrosilylations of esters to alcohols by a well-defined manganese(I) complex with a commercially available bisphosphine ligand are described. These reactions are easy alternatives for stoichiometric hydride reduction or hydrogenation, and employing cheap, abundant, and nonprecious metal is attractive. The hydrosilylations were performed at 100 °C under solvent-free conditions with low catalyst loading. A large variety of aromatic, aliphatic, and cyclic esters bearing different functional groups were selectively converted into the corresponding alcohols in good yields.

Synthesis, structure and catalytic activity of manganese(ii) complexes derived from bis(imidazole)methane-based ligands

New mononuclear manganese(ii) complexes [Mn(κ2-L1)(OAc)2] ([Mn]-1), [Mn(κ2-L2)(OAc)2] ([Mn]-2) and [Mn(κ2-L3)(OAc)2] ([Mn]-3) with imidazole based ligands {4,4'-(phenylmethylene)bis(2-ethyl-5-methyl-1H-imidazole)} (L1), {(4,4'-((2-methoxy phenyl)methylene)bis(2-ethyl-5-methyl-1H-imidazole)} (L2) and {4,4'-((2-chlorophenyl) methylene)bis(2-ethyl-5-methyl-1H-imidazole)} (L3) are synthesized and fully characterized by a variety of techniques. Furthermore, the molecular structures of complexes [Mn]-1 and [Mn]-2 are established by single crystal X-ray structure analysis. The synthesized manganese(ii) complexes exhibited efficient catalytic oxidative coupling of primary amines in air under solvent-free conditions to the corresponding imines in moderate to good yields.

1-D manganese(ii)-terpyridine coordination polymers as precatalysts for hydrofunctionalisation of carbonyl compounds

Efficient hydroboration and hydrosilylation of ketones and aldehydes has been achieved using a Mn^II-coordination polymer as precatalyst under mild conditions_.

Hydrosilylation of carbonyl and carboxyl groups catalysed by Mn(i) complexes bearing triazole ligands

Manganese(i) complexes bearing readily accessible triazole ligands are effective catalysts for the hydrosilylation of carbonyl and carboxyl compounds.

(Di)triazolylidene manganese complexes in catalytic oxidation of alcohols to ketones and aldehydes

A robust bimetallic manganese complex with a mesoionic 1,2,3,-triazolylidene ligand for efficient oxidation of alcohols with tert-butylhydroperoxide.

First-Row Transition Metal (De)Hydrogenation Catalysis Based On Functional Pincer Ligands

The use of 3d metals in de/hydrogenation catalysis has emerged as a competitive field with respect to "traditional" precious metal catalyzed transformations. The introduction of functional pincer ligands that can store protons and/or electrons as expressed by metal-ligand cooperativity and ligand redox-activity strongly stimulated this development as a conceptual starting point for rational catalyst design. This review aims at providing a comprehensive picture of the utilization of functional pincer ligands in first-row transition metal hydrogenation and dehydrogenation catalysis and related synthetic concepts relying on these such as the hydrogen borrowing methodology. Particular emphasis is put on the implementation and relevance of cooperating and redox-active pincer ligands within the mechanistic scenarios.

A β-diketiminate manganese catalyst for alkene hydrosilylation: substrate scope, silicone preparation, and mechanistic insight

The dimeric β-diketiminate manganese hydride compound, [(2,6-iPr2PhBDI)Mn(μ-H)]2, was prepared by treating [(2,6-iPr2PhBDI)Mn(μ-Cl)]2 with NaEt3BH. This compound was characterized by single crystal X-ray diffraction and found to feature high-spin Mn centres that exhibit strong magnetic coupling by EPR spectroscopy. Once characterized, [(2,6-iPr2PhBDI)Mn(μ-H)]2 was found to mediate the hydrosilylation of a broad scope of alkenes at elevated temperature. Aliphatic alkenes were found to undergo anti-Markovnikov hydrosilylation, while the hydrosilylation of styrenes using [(2,6-iPr2PhBDI)Mn(μ-H)]2 afforded Markovnikov's product. Importantly, this catalyst has also been employed for the cross-linking of industrially-relevant silicones derived from vinyl-terminated poly(dimethylsiloxane) and 1,2,4-trivinylcyclohexane with catalyst loadings as low as 0.05 mol%. To gain a mechanistic understanding of [(2,6-iPr2PhBDI)Mn(μ-H)]2-catalyzed olefin hydrosilylation, 4-tert-butylstyrene was added to [(2,6-iPr2PhBDI)Mn(μ-H)]2 and conversion to the monomeric Mn alkyl complex, (2,6-iPr2PhBDI)Mn(CH(CH3)(4- t BuPh)), was observed. Isolation of this secondary alkyl intermediate confirms that olefin insertion into the Mn-H bond dictates the observed regioselectivities. The importance of our mechanistic findings as they relate to recent advances in Mn hydrosilylation catalysis is described herein.

Renewable Isohexide-Based, Hydrolytically Degradable Poly(silyl ether)s with High Thermal Stability

Several degradable poly(silyl ether)s (PSEs) have been synthesized by dehydrogenative cross-coupling between bio-based 1,4:3,6-dianhydrohexitols (isosorbide and isomannide) and commercially available hydrosilanes. An air-stable manganese salen nitrido complex [Mn^V N(salen-3,5-tBu₂ )] was employed as the catalyst. High-molecular-weight polymer was obtained from isosorbide and diphenylsilane (M_n up to 17000 g mol^-1 ). Thermal analysis showed that these PSEs possessed high thermal stability with thermal decomposition temperatures (T_-5 % ) of 347-446 °C and glass transition temperatures of 42-120 °C. Structure-property analysis suggested that steric bulk and molecular weight have a significant influence to determine the thermal properties of synthesized polymers. Importantly, these polymers were degraded effectively to small molecules under acidic and basic hydrolysis conditions.

Manganese-Catalyzed Hydrosilylation Reactions

Over the past few decades, manganese-catalyzed hydrosilylation of C=O or C=C/C≡C unsaturated bonds have undergone enormous developments. In this focus review, the hydrosilylation reactions of alkenes, alkynes, and carbonyl-containing substrates catalyzed by manganese complexes are summarized. Moreover, the mechanisms of the manganese-catalyzed hydrosilylation are briefly discussed.

One-Pot Sequential Kinetic Profiling of a Highly Reactive Manganese Catalyst for Ketone Hydroboration: Leveraging σ-Bond Metathesis via Alkoxide Exchange Steps

A comprehensive experimental and computational mechanistic study of the highly enantioselective hydroboration of ketones catalyzed by a manganese(II) alkyl boxmi pincer complex is reported. The catalyst operates at low catalyst loadings (down to 0.01 mol %) under very mild conditions (typically -40 °C) and facilitates the reduction of both aryl alkyl and dialkyl ketones with excellent selectivity (up to >95%ee). Catalyst activation pathways were investigated, demonstrating that a manganese(II) hydride and a manganese(II) alkoxide species are part of the catalytic cycle and can be generated via σ-bond metathesis of the alkyl precursor with the borane or by alcoholysis. Extensive kinetic experiments based on a "one-pot sequential kinetic profiling" approach under various conditions in combination with kinetic simulations reveal that two catalytic cycles are effective with this earth-abundant base metal catalyst: (i) a minor MnH/borane-mediated insertion cycle, in which the subsequent, product-releasing metathesis step is rate determining ( k _m = 0.076 s^-1), giving a background reaction, which is zeroth order in substrate concentrations, and (ii) a major MnOR/borane-based alkoxide exchange process, leveraging the high-barrier metathesis via the affiliation to an insertion step. The latter features non-integer reaction orders in both reagents due to a combination of an adduct formation step ( k _a = 2.12 M^-1 s^-1, k _-a = 0.49 s^-1) and a substrate insertion step of comparable rates ( k _ai = 3.74 M^-1 s^-1). The kinetic findings are underpinned by high-level density functional theory calculations of the mechanism, control experiments, and kinetic isotope effect/Hammett/Eyring analysis in different concentration regimes. The study highlights the role of a rigorous mechanistic understanding of homogeneous catalytic processes in 3d metals for rational catalyst discovery and optimization.

Carbonyl and ester C–O bond hydrosilylation using κ4-diimine nickel catalysts

(^Ph2PPrDI)Ni chemoselectively catalyzes α-allyl ester C–O bond hydrosilylation to prepare silyl esters with turnover frequencies of up to 990 h⁻¹.

The Emergence of Manganese-Based Carbonyl Hydrosilylation Catalysts

In recent years, interest in homogeneous manganese catalyst development has intensified because of the earth-abundant and nontoxic nature of this metal. Although compounds of Mn have largely been utilized for epoxidation reactions, recent efforts have revealed that Mn catalysts can mediate a broad range of reductive transformations. Low-valent Mn compounds have proven to be particularly effective for the hydrosilylation of carbonyl- and carboxylate-containing substrates, and this Account aims to highlight my research group's contributions to this field. In our initial 2014 communication, we reported that the bis(imino)pyridine-supported compound (^Ph2PPrPDI)Mn mediates ketone hydrosilylation with exceptional activity under solvent-free conditions. Silanes including Ph₂SiH₂, (EtO)₃SiH, (EtO)₂MeSiH, and (EtO)Me₂SiH were found to partially reduce cyclohexanone in the presence of (^Ph2PPrPDI)Mn, while turnover frequencies of up to 1280 min^-1 were observed using PhSiH₃. This led us to evaluate the hydrosilylation of 11 additional ketones and allowed for the atom-efficient preparation of tertiary and quaternary silanes. At that time, it was also discovered that (^Ph2PPrPDI)Mn catalyzes the dihydrosilylation of esters (by way of acyl C-O bond hydrosilylation) to yield a mixture of silyl ethers with modest activity. Earlier this year, the scope of these transformations was extended to aldehydes and formates, and the observed hydrosilylation activities are among the highest obtained for any transition-metal catalyst. The effectiveness of three related catalysts has also been evaluated: (^Ph2PPrPDI)MnH, (^PyEtPDEA)Mn, and [(^Ph2PEtPDI)Mn]₂. To our surprise, (^Ph2PPrPDI)MnH was found to exhibit higher carboxylate dihydrosilylation activity than (^Ph2PPrPDI)Mn, while (^PyEtPDEA)Mn demonstrated remarkable carbonyl hydrosilylation activity considering that it lacks a redox-active supporting ligand. The evaluation of [(^Ph2PEtPDI)Mn]₂ revealed competitive aldehyde hydrosilylation and formate dihydrosilylation turnover frequencies; however, this catalyst is significantly inhibited by pyridine and alkene donor groups. In our efforts to fully understand how (^Ph2PPrPDI)Mn operates, a thorough electronic structure evaluation was conducted, and the ground-state doublet calculated for this compound was found to exhibit nonclassical features consistent with a low-spin Mn(II) center supported by a singlet PDI dianion and an intermediate-spin Mn(II) configuration featuring antiferromagnetic coupling to PDI diradical dianion. A comprehensive mechanistic investigation of (^Ph2PPrPDI)Mn- and (^Ph2PPrPDI)MnH-mediated hydrosilylation has revealed two operable pathways, a modified Ojima pathway that is more active for carbonyl hydrosilylation and an insertion pathway that is more effective for carboxylate reduction. Although these efforts represent a small fraction of the recent advances made in Mn catalysis, this work has proven to be influential for the development of Mn-based reduction catalysts and is likely to inform future efforts to develop Mn catalysts that can be used to prepare silicones.