Importance of Singlet Oxygen in Photocatalytic Reactions of 2-Aryl-1,2,3,4-tetrahydroisoquinolines Using Chalcogenorosamine Photocatalysts

Exploring the Te(II)/Te(IV) Redox Couple of a Tellurorosamine Chromophore: Photophysical, Photochemical, and Electrochemical Studies

A tellurorosamine dye [Te(II)] undergoes aerobic photooxidation. Although Te(IV) species have been used in a number of oxidations, key Te(IV)-oxo and Te(IV)-bis(hydroxy) intermediates are challenging to study. Under aerobic irradiation with visible light, Te(II) (λmax = 600 nm) transforms into a Te(IV) species (λmax = 669 nm). The resultant Te(IV) species is not stable in the dark or at -20 °C, decomposing back to Te(II) and other byproducts over many hours. To eliminate the structural ambiguity of the Te(IV) photoproduct, we used spectroelectrochemistry, wherein the bis(hydroxy) Te(IV)-(OH)2 was electrochemically generated under anaerobic conditions. The absorption of Te(IV)-(OH)2 matches that of the Te(IV) photoproduct. Because isosbestic points are maintained both photochemically and electrochemically, the oxo core formed photochemically must rapidly equilibrate with Te(IV)-(OH)2. Calculations on the bis(hydroxy) versus oxo species further corroborate that the equilibration is rapid and the spectra of the two species are similar. To further explore Te(IV) cores, two novel compounds, Te(IV)-Cl2 and Te(IV)-Br2, were synthesized. Characterization of Te(IV)-X2 was simplified because these cores have no analogue to the Te(IV)-(O)/Te(IV)-(OH)2 equilibrium. This work provides insights into the photophysical and electrochemical behavior of Te analogues of chalcogenoxanthylium dyes, which are relevant for a broad range of photochemical applications.

Second Generation of Near-Infrared Cyanine-Based Photocatalysts for Faster Organic Transformations

A second generation of cyanine-based near-infrared photocatalysts has been developed to accelerate organic transformations. Cyanines were prepared and fully characterized prior to evaluation of their photocatalytic activities. Catalyst efficiency was determined by using two model oxidation and reduction reactions. For the aza-Henry reaction, cyanines bearing an amino group on the heptamethine chain led to the best results. For trifluoromethylation, the stability of the photocatalyst was found to be the key parameter for efficient and rapid conversion.

Squaraines as near-infrared photocatalysts for organic reactions

Herein, unprecedented uses of squaraine derivatives as new organic near-infrared photocatalysts are reported. These efficient molecular tools are able to promote oxidation and reduction for organic transformations through photocatalytic conditions. A mechanistic investigation is performed to distinguish between competitive Single Electron Transfer and Energy Transfer pathways.

Visible-Light Promoted Regioselective Oxygenation of Quinoxalin-2(1H)-ones Using O2 as an Oxidant

A visible-light-mediated sustainable approach for metal-free oxygenation of quinoxalin-2(1H)-one by employing Mes-Acr-MeClO₄ as a photocatalyst without using any additive or cocatalyst is reported here. O₂ served as the eco-friendly and green oxidant source for this conversion. In addition, the protocol exhibited high regioselectivity and tolerance toward a broad spectrum of functional groups to furnish quinoxaline-2,3-diones in good to excellent yields.

Oxidative α-Functionalization of 1,2,3,4-Tetrahydroisoquinolines Catalyzed by a Magnetically Recoverable Copper Nanocatalyst. Application in the Aza-Henry Reaction and the Synthesis of 3,4-Dihydroisoquinolones

The oxidative α-functionalization of 2-aryl-1,2,3,4-tetrahydroisoquinolines (THIQs) promoted by a versatile heterogeneous nanocatalyst consisting of copper nanoparticles immobilized on silica-coated maghemite (CuNPs/MagSilica) has been accomplished. The methodology was successfully applied in the cross-dehydrogenative coupling (CDC) reaction of N-aryl THIQs and other tertiary amines with nitromethane as a pro-nucleophile (aza-Henry reaction) and the α-oxidation of THIQs with O₂ as a green oxidant. Phosphite, alkyne, or indole derivatives were also shown to be suitable candidates for their use as pro-nucleophiles in the CDC reaction with THIQs. The catalyst, with very low copper loading (0.4-1.0 mol % Cu), could be easily recovered by means of an external magnet and reused in four cycles without significant loss of activity.

Visible Light Driven Metal-Free Photoredox Catalyzed α-benzylation and α-oxygenation of N-substituted tetrahydroisoquinolines: Applications to Synthesis of Natural Products

Herein, visible light mediated organophoto redox catalysed simple and convenient method for the a-benzylation and a-oxygenation of tertiary amines is demonstrated. Synthesis of novel thiophenol based donor acceptor organophotoredox catalysts 4a - 4d were investigated along with commercial catalyst 4-CzIPN ( 4e ). A diverse biologically active a-benzylated tetrahydroisoquinolines and natural products such as (±)-Norlaudanosine, (±)-laudanosine and (±)-xylopinine have been synthesized under the optimized conditions in yields ranging from from 62-91%. Exploitation of synthesized a-benzylated compound using present phtoredox catalyzed conditions gave rise to dehydyrogenative benzylic oxidation product under oxygen atmosphere which is known to display biologically and structurally important properties. Also, various N-protected tertiary amines were found to be suitable for the a-oxygenation reactions using catalyst 4e and resulted in good yields (61-85%).

Photosensitized selective semi-oxidation of tetrahydroisoquinoline: a singlet oxygen path

Selective semi-oxidation of tetrahydroisoquinoline (THIQ) leads to a valuable dihydroisoquinoline (DHIQ) derivative via singlet oxygen photooxidation process. Typical photosensitisers (i.e., Ru complexes) can activate the reaction even under heterogeneous conditions that facilitate catalyst separation and reusability. In contrast to DHIQ, THIQ acts as an efficient singlet oxygen quencher driving the reaction selectivity. The reaction can also be facilitated by semiconductor catalysts such as MoCo@GW, a glass wool-based catalyst that is easy to separate and reuse and compatible with flow photochemistry. Its role is to mediate the formation of isoquinoline (IQ) and thus an in situ-generated singlet oxygen catalyst. Laser flash photolysis with NIR detection provides proof of the singlet oxygen mechanism proposed and rate constants for the key steps that mediate the oxidation.

Direct Near Infrared Light-Activatable Phthalocyanine Catalysts

The high penetration of near-infrared (NIR) light makes it effective for use in selective reactions under light-shielded conditions, such as in sealed reactors and deep tissues. Herein, we report the development of phthalocyanine catalysts directly activated by NIR light to transform small organic molecules. The desired photocatalytic properties were achieved in the phthalocyanines by introducing the appropriate peripheral substituents and central metal. These phthalocyanine photocatalysts promote cross-dehydrogenative-coupling (CDC) under irradiation with 810 nm NIR light. The choice of solvent is important, and a mixture of a reaction-accelerating (pyridine) and -decelerating (methanol) solvents was particularly effective. Moreover, we demonstrate photoreactions under visible-light-shielded conditions through the transmission of NIR light. A combined experimental and computational mechanistic analysis revealed that this NIR reaction does not involve a photoredox-type mechanism with electron transfer, but instead a singlet-oxygen-mediated mechanism with energy transfer.

Cross-dehydrogenative Coupling of N-Aryl Tetrahydroisoquinolines Catalyzed by an Anthraquinone-containing Polymeric Photosensitizer

This work reports the photocatalytic application of an anthraquinone-containing polymeric photosensitizer (AQ-PHEMA) in the visible light-induced cross-dehydrogenative-coupling of N-aryl tetrahydroisoquinolines with several nucleophiles, including nitromethane, 1-methyl-2-alkyl ketone and dialkyl (aryl) phosphine oxide. The results revealed that the reaction could be catalyzed by AQ-PHEMA efficiently to afford a series of 1-substituted-2-aryl-1,2,3,4-tetrahydroisoquinolines in good to excellent yields with nice substrate tolerance under aerobic conditions at room temperature. The practical application potential was also showcased by a gram-scale synthesis. More importantly, the utilization of AQ-PHEMA as a heterogeneous photosensitizer also showed nice recyclability and reusability of the catalyst, whereas AQ-PHEMA can be easily separated and reused for at least 8 times without significant loss of photocatalytic activity.

Fluorescent Hybrid Porous Polymers as Sustainable Heterogeneous Photocatalysts for Cross-Dehydrogenative Coupling Reactions

A series of hybrid porous polymers (HPPs) based on polyhedral oligomeric silsesquioxane (POSS) were synthesized, characterized, and successfully used as metal-free heterogeneous photocatalysts for cross-dehydrogenative coupling reactions (CDC), for which the aza-Henry coupling of tetrahydroisoquinolines and nitroalkanes was studied as the model reaction. The reactions run smoothly at room temperature under visible (blue) light irradiation using gaseous oxygen as an oxidant under atmospheric pressure. These novel metal-free heterogeneous photocatalysts can be readily recovered and reused without a significant loss of reactivity. Mechanistic investigations revealed the intermediacy of ¹O₂, obtained from ³O₂ sensitization (energy transfer) by the photoexcited catalyst.

α-Oxygenation of N-aryl/alkyl heterocyclic compounds via ruthenium photocatalysis

We herein report ruthenium(iii) photocatalyzed oxidation of N-aryl tertiary amines to the corresponding amides.

Ligand electronic fine-tuning and its repercussion on the photocatalytic activity and mechanistic pathways of the copper-photocatalysed aza-Henry reaction

Subtle electronic ligand effects have a strong impact on the mechanistic pathway of a photocatalytic coupling reaction.

Metallacycle Transfer and its Link to Light-Emitting Materials and Conjugated Polymers

Major advances in optoelectronic technologies (e. g., solar cells, organic light-emitting diodes, etc…) are prefaced by the discovery of new synthetic methodologies. In this review, the key role of the Fagan-Nugent reaction in enabling our team (and others) to gain access to new building blocks for luminescent materials and conjugated polymers bearing p-block elements will be described. The Fagan-Nugent reaction is extremely powerful as a synthetic tool since the efficient zirconium-element atom exchange involved affords a wide range of unsaturated inorganic heterocycles of controllable composition and function.