Design and Syntheses of Palladium Complexes of NNN/CNN Pincer Ligands: Catalyst for Cross Dehydrogenative Coupling Reaction of Heteroarenes

Mono and Dinuclear Palladium Pincer Complexes of NNSe Ligand as a Catalyst for Decarboxylative Direct C-H Heteroarylation of (Hetero)arenes

This report describes the synthesis of a new NNSe pincer ligand and its mono- and dinuclear palladium(II) pincer complexes. In the absence of a base, a dinuclear palladium pincer complex (C1) was isolated, while in the presence of Et3 N base a mononuclear palladium pincer complex (C2) was obtained. The new ligand and complexes were characterized using techniques like 1 H, 13 C{1 H} nuclear magnetic resonance (NMR), fourier transform infrared (FTIR), high-resolution mass spectrometry (HRMS), ultraviolet-visible (UV-Visible), and cyclic voltammetry. Both the complexes showed pincer coordination mode with a distorted square planar geometry. The complex C1 has two pincer ligands attached through a Pd-Pd bond in a dinuclear pincer fashion. The air and moisture-insensitive, thermally robust palladium pincer complexes were used as the catalyst for decarboxylative direct C-H heteroarylation of (hetero)arenes. Among the complexes, dinuclear pincer complex C1 showed better catalytic activity. A variety of (hetero)arenes were successfully activated (43-87 % yield) using only 2.5 mol % of catalyst loading under mild reaction conditions. The PPh3 and Hg poisoning experiments suggested a homogeneous nature of catalysis. A plausible reaction pathway was proposed for the dinuclear palladium pincer complex catalyzed decarboxylative C-H bond activation reaction of (hetero)arenes.

Palladium complexes containing NNN pincer type ligands and their activities in Suzuki-Miyaura cross coupling reaction

Five new NNN pincer-type ligands and their palladium complexes were successfully synthesised and characterised by FT-IR, ¹H NMR, ¹³C NMR, and UV-vis analyses. TEM analysis was used to observe the morphological character of the black residues obtained from the fourth cycle of the reusability test. Furthermore, suitable crystals of the N²,N⁶-bis(2-tert-butylphenyl)pyridine-2,6-dicarboxamide and its palladium complex were elucidated with the X-ray single crystal diffraction method. Both the ligand and its palladium complex crystallise in a monoclinic system with space group P2₁/c for the H₂L⁴ and C2/c for the palladium complex. The structure of the pincer ligand and its palladium complex were stabilised by intramolecular and intermolecular C-H⋅⋅⋅O, C-H⋅⋅⋅N, and N-H⋅⋅⋅N contacts. A Suzuki-Miyaura cross-coupling reaction between aryl halides and phenylboronic acid was used to assess the catalytic abilities of the palladium pincer complexes. All of the prepared complexes exhibited considerable catalytic activity. However, complexes 4 (Acetonitrile-N²,N⁶-bis(2-tert-butylphenyl)pyridine-2,6-dicarboxamidopalladium(II)) and 5 (Acetonitrile-N²,N⁶-bis(2-nitrophenyl)pyridine-2,6-dicarboxamidopalladium(II)) provided almost 100% conversion with nearly 100% yield in the reaction between 4-bromotoluene and phenylboronic acid. Furthermore, these active complexes catalysed the reaction of the sterically hindered and deactivated substrates (1-Bromo-4-izobutylbenzene and 2-bromo-6-methoxynaphthalene) with phenylboronic acid, and complete conversion and yields up to 100% were achieved in a short time with the 2-bromo-6-methoxynaphthalene.

Pd-Catalyzed Aryl C-H Amination with Diaziridinone

This work describes an efficient Pd-catalyzed ortho-C-H amination of N-(quinolin-8-yl)benzamides with di-t-butyldiaziridinone, providing a variety of anthranilic amides in good yields. The reaction likely involves the formation of a pallada(II)heterocycle via aryl C-H activation and subsequent amination with di-t-butyldiaziridinone.

Direct Heteroarylation Guidelines for Well-Defined Thiophene-Based Conjugated Molecules

Direct (hetero)arylation polymerization (DHAP) shows great promise for simple, low cost, and benign preparation of conjugated polymers. However, coupling selectivity has always posed a problem. Herein, direct (hetero)arylation was studied on small molecule models to develop suitable conditions for C-C couplings between 2-methylthiophene acting as an electron-donating moiety and 2-thiophenecarbonitrile acting as an electron-withdrawing moiety, when one of the partners is brominated. We observed that the best conditions are obtained when the electron-withdrawing moiety is halogenated.

Copper-Catalyzed Aerobic Cross-Dehydrogenative Coupling of β-Oxime Ether Furan with Indole

Heterobiaryls serve as relevant structural motifs in many fields of high applicative importance such as drugs, agrochemicals, organic functional materials etc. Cross-dehydrogenative coupling involving direct oxidation of two C-H bonds to construct a C-C bond is actively being pursued as a more benign and 'greener' alternative for synthesizing heterobiaryls. Herein, we report a Cu(I)-catalyzed cross-dehydrogenative coupling of indoles and furans, two of the most important aromatic heterocycles using air as the terminal oxidant. The reaction proceeds with regio- and chemoselectivity to give the cross-coupled products in good to excellent yields generally. A broad substrate scope with respect to both the coupling partners has been demonstrated to prove the generality of this reaction. This represents the hitherto unexplored cross-dehydrogenative coupling methodology to obtain an indole-furan biaryl motif.

Synthesis of Unsymmetrical Biheteroarenes via Dehydrogenative and Decarboxylative Coupling: a Decade Update

The design and development of robust and efficient methods for installing one heterocycle with another is endowed as a ubiquitous and powerful synthetic strategy to access complex organic biheterocycles in recent days due to their pervasive applications in medicinal as well as material chemistry. This perspective presents an overview on the recent findings and developments for the synthesis of unsymmetrical biheteroarenes via dehydrogenative and decarboxylative couplings with literature coverage mainly extending from 2011 to 2021. For simplification of the readers, the article has been subcategorized based on the catalysts used in the reactions.

Synthesis, Characterization, and Catalytic Application of Palladium Complexes Containing Indolyl-NNN-Type Ligands

In this study, a series of N-heterocyclic indolyl ligand precursors 2-Py-Py-IndH, 2-Py-Pz-IndH, 2-Py-7-Py-IndH, 2-Py-7-Pz-IndH, and 2-Ox-7-Py-IndH (L¹H-L⁵H) were prepared. The treatment of ligand precursors with 1 equivalent of palladium acetate affords palladium complexes 1-5. All ligand precursors and palladium complexes were characterized by NMR spectroscopy and elemental analysis. The molecular structures of complexes 3 and 5 were determined by single crystal X-ray diffraction techniques. The application of those palladium complexes 1-5 to the Suzuki reaction with aryl halide substrates was examined.

Palladium Goes First: A Neutral Asymmetric Heteroditopic N,P Ligand Forming Pd-3d Heterobimetallic Complexes

A facile two-step synthesis of bis(1-methylhydrazinyl)pyrimidine from pyridine-2-carbaldehyde and 2-diphenylphosphanylbenzaldehyde gave access to the new asymmetric ligand 1. The phosphane selectively guides Pd^II into the softer tridentate N,N,P pocket, yielding monometallic complex 2. A second reaction with a 3d transition metal complex precursor (groups 7 to 12) fills the vacant N,N,N pocket and thus provides a variety of heterobimetallic complexes of the type Pd^II/M^II (M = Mn (3), Fe (4), Co (5), Ni (6), Cu (7), Zn (8)). Single-crystal X-ray diffraction studies were performed for all complexes. The assembly of μ₂-chlorido-bridged dimers was observed for complexes 5-7 in the solid state, while DOSY NMR experiments have shown that 5-7 are unbridged monomers in solution. As an exception, Fe^II prefers to form the homoleptic meridional complex [Fe{PdCl(1)}₂](OTf)₄ (4). The electrochemical behavior and the effective magnetic moment in solution were investigated for all complexes by cyclic voltammetry and Evans method, respectively. Experimental UV/vis results were interpreted by performing TD-DFT calculations on 1, 2, and 3.

Synthesis, Study, and Application of Pd(II) Hydrazone Complexes as the Emissive Components of Single-Layer Light-Emitting Electrochemical Cells

For the first time, square planar Pd(II) complexes of hydrazone ligands have been investigated as the emissive components of light-emitting electrochemical cells (LECs). The neutral transition metal complex, [Pd(L¹)₂]·2CH₃OH (1), (HL¹ = (E)-N'-(phenyl(pyridin-2-yl)methylene)isonicotinhydrazide), was prepared and structurally characterized. Complex 1 displays quasireversible redox properties and is emissive at room temperature in solution with a λ_max of 590 nm. As a result, it was subsequently employed as the emissive material of a single-layer LEC with configuration FTO/1/Ga/In, where studies reveal that it has a yellow color with CIE(x, y) = (0.33, 0.55), a luminance of 134 cd cm^-2, and a turn-on voltage of 3.5 V. Protonation of the pendant pyridine nitrogen atoms of L¹ afforded a second ionic complex [Pd(L¹H)₂](ClO₄)₂ (2) which is also emissive at room temperature with a λ_max of 611 nm, resulting in an orange LEC with CIE(x, y) = (0.43, 0.53). The presence of mobile anions and cations in the second inorganic transition metal complex resulted in more efficient charge injection and transport which significantly improved the luminance and turn-on voltage of the device to 188.6 cd cm^-2 and 3 V, respectively. This study establishes Pd(II) hydrazone complexes as a new class of materials whose emissive properties can be chemically tuned and provides proof-of-concept for their use in LECs, opening up exciting new avenues for potential applications in the field of solid state lighting.

Pd-Catalyzed Aerobic Oxidative Coupling of Thiophenes: Synergistic Benefits of Phenanthroline Dione and a Cu Cocatalyst

Substituted bithiophenes are prominent fragments in functional organic materials, and they are ideally prepared via direct oxidative C-H/C-H coupling. Here, we report a novel PdII catalyst system, employing 1,10-phenanthroline-5,6-dione (phd) as the ancillary ligand, that enables aerobic oxidative homocoupling of 2-bromothiophenes and other related heterocycles. These observations represent the first use of phd to support Pd-catalyzed aerobic oxidation. The reaction also benefits from a Cu(OAc)2 cocatalyst, and mechanistic studies show that Cu promotes C-C coupling, implicating a role for CuII different from its conventional contribution to reoxidation of the Pd catalyst.