Synthesis of 3,4-Fused Tricyclic Indoles through Cascade Carbopalladation and C-H Amination: Development and Total Synthesis of Rucaparib

Modular and Regioselective Synthesis of Benzo-Fused Five-Membered Rings Enabled by Co/Ti Synergism

The regiocontrol in constructing benzo-fused five-membered rings by C-H cyclization remains an important challenge. We report a highly general and regioselective methodology to access such heterocycles and indenones, where under the catalysis of CoBr2/bipyridine, aryl titanates, alkynes and EX2 (E = NR, S(O), RP(O), R2Si, CO, etc.) were assembled to various heterocycles and indenones in a modular manner. Unprecedented 1,2-Co/Ti heterobimetallic arylene and benzotitanole intermediates have played crucial roles in these syntheses.

Rapid Access to Fused Tetracyclic N-Heterocycles via Amino-to-Alkyl 1,5-Palladium Migration Coupled with Intramolecular C(sp3)-C(sp2) Coupling

An unprecedented route for the preparation of fused tetracyclic N-heterocycles is presented through the palladium-catalyzed cyclization of isocyanides with alkyne-tethered aryl iodides. In this transformation, a novel amino-to-alkyl 1,5-palladium migration/intramolecular C(sp3)-C(sp2) coupling sequence was observed first. More importantly, isocyanide exhibited three roles, serving simultaneously as a C1 synthon, a C1N1 synthon, and the donor of C(sp3) for C(sp3)-C(sp2) coupling, and the reaction was the sole successful example that achieved C(sp3)-H activation of isocyanide.

Pd-Catalyzed Aryl C-H Amination with Diaziridinone

This work describes an efficient Pd-catalyzed ortho-C-H amination of N-(quinolin-8-yl)benzamides with di-t-butyldiaziridinone, providing a variety of anthranilic amides in good yields. The reaction likely involves the formation of a pallada(II)heterocycle via aryl C-H activation and subsequent amination with di-t-butyldiaziridinone.

Recent Advances in the Synthesis of 3,n-Fused Tricyclic Indole Skeletons via Palladium-Catalyzed Domino Reactions

3,n-fused (n = 4-7) tricyclic indoles are pervasive motifs, embedded in a variety of biologically active molecules and natural products. Thus, numerous catalytic methods have been developed for the synthesis of these skeletons over the past few decades. In particular, palladium-catalyzed transformations have received much attention in recent years. This review summarizes recent developments in the synthesis of these tricyclic indoles with palladium-catalyzed domino reactions and their applications in the total synthesis of representative natural products.

Palladium-Catalyzed Cyclization Coupling with Cyclobutanone-Derived N-Tosylhydrazones: Synthesis of Benzofuran-3-Cyclobutylidenes and Spirocyclobutanes

A palladium-catalyzed cyclization coupling of iodoarene-tethered alkynes with cyclobutanone-derived N-tosylhydrazones is reported, providing a convenient and efficient approach to benzofuran-3-cyclobutylidenes. On this basis, spirocyclobutanes can be generated smoothly in an efficient cascade manner by the addition of dienophiles. Good yields and scalability are demonstrated. Sequential intramolecular carbopalladation, palladium-carbene migratory insertion, δ-hydride elimination, and cycloaddition processes are involved.

Synthetic Study of Dragmacidin E: Enantioselective Construction of the Seven-Membered Ring-Fused Indole Skeleton with Contiguous Stereocenters

We developed an enantioselective synthetic method of constructing a seven-membered ring-fused indole skeleton with contiguous stereocenters for the synthesis of dragmacidin E. Introduction of chirality at the benzylic position was achieved by Ir-catalyzed asymmetric hydrogenation. After construction of the tricyclic molecular framework using Pd-catalyzed cascade cyclization, the tetrasubstituted carbon center was created using the Ag nitrene-mediated C-H amination reaction. The developed method provided access to the functionalized seven-membered ring-fused indole skeleton with a hydroxymethyl branch in the tetrasubstituted carbon.

Intermolecular Difunctionalization of C,C-Palladacycles Obtained by Pd(0)-Catalyzed C-H Activation

C,C-Palladacycles are an important class of organometallic compounds in which palladium is σ-bonded to two carbon atoms. They have three notable features that make them attractive in organic synthesis and organometallic chemistry: (1) C,C-Palladacycles are reactive intermediates that can be accessed via Pd(0)-catalyzed C-H activation of organic halides. Compared to Pd(II)-catalyzed heteroatom-directed C-H activation, C-H activation catalyzed by Pd(0) has some distinct advantages. In this type of catalytic reaction, the halo groups of readily available organic halides act as traceless directing groups. Furthermore, this strategy avoids the use of stoichiometric external oxidants. (2) C,C-Palladacycles have differentiated reactivities from common open-chain Pd(II) species. In particular, C,C-palladacycles have high reactivity toward electrophiles including alkyl halides. This unique reactivity can be utilized to develop novel reactions. (3) C,C-Palladacycles have two C-Pd bonds, providing a unique platform for developing novel reactions.Although a number of reactions of C,C-palladacycles had been developed prior to our work, the scope was largely limited to intramolecular cyclization reactions. Although Catellani reactions are intermolecular reactions of C,C-palladacycles, only one of the C-Pd bonds is functionalized. Our laboratory has sought to develop intermolecular difunctionalization reactions of C,C-palladacycles that exploit their unique reactivity and open new possibilities in organic synthesis. Aiming to develop synthetically useful reactions, we primarily focus on ring-forming reactions. In this Account, we summarize our laboratory's efforts to exploit intermolecular difunctionalization reactions of C,C-palladacycles that are obtained through Pd(0)-catalyzed C-H activation. We have developed a wide array of new reactions that represent facile and efficient methods for the synthesis of cyclic organic compounds, including functional materials and drug molecules. A range of C,C-palladacycles have been studied, including C(aryl),C(aryl)-palladacycles from 2-halobiaryls, C(aryl),C(alkyl)-palladacycles from ortho-iodo-tert-butylbenzenes or ortho-iodoanisole derivatives, and those obtained by cascade reactions. C,C-Palladacycles have been found to react with a variety of oxidants to furnish Pd(IV) intermediates, such as alkyl halides, aryl halides, diazo compounds, and N,N-di-tert-butyldiaziridinone, ultimately affording various cyclic structures, including 5-10-membered rings, carbo- and azacycles, spirocycles, and fused rings. Furthermore, novel reactivity of C,C-palladacycles has been discovered. For example, we found that C,C-palladacycles have unusually high reactivity toward disilanes, which can be leveraged to disilylate a variety of C,C-palladacycles with very high efficiency. These results should provide inspiration to develop other C-Si bond-forming reactions in the future. We hope that this Account will stimulate further research into the rich chemistry of C,C-palladacycles, in particular reactions that find practical applications in the synthesis of bioactive and functional molecules and those that advance the state of the art in C-H functionalization.

Pd(II)-Catalyzed Synthesis of Polycyclic Heteroarenes via an Aminopalladation/C-H Activation/Dealkylation/Decarboxylative Cyclization Cascade

Until now, cascade reactions involving five-membered C,C-palladacycles rely heavily on Pd(0)-catalyzed C-H functionalization of aryl halides initiated by carbopalladation. Herein, we report a novel Pd(II)-catalyzed cascade decarboxylative cyclization of o-alkynylanilines initiated by aminopalladation. In this protocol, o-alkynylanilines undergo sequential anti aminopalladation, C-H activation, and dealkylation to form C,C-palladacycles, which are then trapped by o-bromobenzoic acids or 8-bromo-1-naphthoic acid to produce diverse polycyclic heteroarenes, such as dibenzo[a,c]carbazoles and multiple arene-fused cyclohepta[1,2-b]indoles.

A cyanide-catalyzed imino-Stetter reaction enables the concise total syntheses of rucaparib

Two routes toward the synthesis of rucaparib, an FDA-approved drug used for the treatment of ovarian and prostate cancers, have been developed from commercially available starting materials utilizing the cyanide-catalyzed imino-Stetter reaction as the key step for the construction of the indole motif bearing all the desired substituents in their correct positions. In the first-generation synthesis, meta-fluorobenzoate, the starting material currently used in the process chemistry route of rucaparib, was converted into 4,6-disubstituted 2-aminocinnamic acid derivatives (ester or amide). The cyanide-catalyzed imino-Stetter reaction of aldimines derived from the resulting 2-aminocinnamic acid derivatives and a commercially available aldehyde afforded the desired indole-3-acetic acid derivatives. The final azepinone formation completed the total synthesis of rucaparib in 27% overall yield. To resolve the issues raised in the first-generation synthesis, we further developed a second-generation synthesis of rucaparib. The Heck reaction of a commercially available ortho-iodoaniline derivative with acrylonitrile provided 4,6-disubstituted 2-aminocinnamonitrile, which was subjected to the imino-Stetter reaction with the same aldehyde to provide the desired indole-3-acetonitrile product. Subsequent construction of the azepinone scaffold completed the total synthesis of rucaparib in 59% overall yield over three separation operations. The synthetic strategy reported herein can provide a highly practical route to access rucaparib from commercially available starting materials (5.2% overall yield in the current process chemistry route vs. 59% overall yield in the second-generation synthesis).

Research advances in palladium-catalysed intermolecular C-H annulation of aryl halides with various aromatic ring precursors

Transition-metal-catalysed C-H functionalization has emerged as a powerful approach for the transformation of organic molecules due to its high atom and step economy. Palladium-catalysed intermolecular C-H annulation of aryl halides, especially those involving annulation of a five-membered C,C-palladacycle with coupling reagents, have attracted considerable attention in the past decades. This review summarizes the progress on palladium-catalysed intermolecular C-H annulation of aryl halides with various aromatic ring precursors. Mechanistically, five-membered C,C-palladacycles as intermediates are involved in the majority of reactions.

Total Synthesis of Rucaparib

A concise total synthesis of rucaparib, an FDA-approved drug for ovarian and prostate cancers, is reported. The Heck reaction of the commercially available aryl iodide with acrylonitrile provided the desired (E)-2-aminocinnamonitrile derivative. A subsequent imino-Stetter reaction of the aldimine derived from 2-aminocinnamonitrile and aldehyde furnished indole-3-acetonitrile bearing the desired substituents at appropriate positions. The construction of the final azepinone scaffold via reduction of the nitrile group followed by seven-membered lactamization afforded rucaparib. Notably, the synthesis of rucaparib is achieved using commercially available starting materials in only three separation operations with 54% overall yield.

Synthesis of Benzofused O- and N-Heterocycles through Cascade Carbopalladation/Cross-Alkylation of Alkynes Involving the C–C Cleavage of Cyclobutanols

We report a Pd-catalyzed route to heterocycles bearing a tetrasubstituted alkene fragment. Our approach merges the intramolecular carbopalladation of tethered alkynes with an alkylation step produced by the C–C cleavage of cyclobutanol derivatives. An alkenyl-Pd(II) intermediate has been isolated and characterized by X-ray diffraction studies. Interestingly, the nature of the tethering alkynyl chain influences the E/Z stereochemistry of the alkenyl fragment in the functionalized heterocycles.

Decarboxylative Amination of Benzoic Acids Bearing Electron-Donating Substituents and Non-Activated Amines

Efficient methods for decarboxylative activation of benzoic acids into great valuable products are highly sought after. Here we report a highly desirable and straightforward decarboxylative amination of readily available benzoic...

Decarboxylative cyclization of o-chlorobenzoic acids with C,C-palladacycles formed by an aminopalladation/dealkylation strategy to access dibenzo[a,c]carbazoles

A novel decarboxylative cyclization of o-chlorobenzoic acids with C,C-palladacycles formed by an aminopalladation/dealkylation strategy for the assembly of dibenzo[a,c]carbazoles has been reported.

Synthesis of N-Fused Triazole-Piperazine-Quinazolinones via One-Pot Tandem Click Reaction and Cross-Dehydrogenative Coupling

Herein, a one-pot protocol to synthesize tetracyclic triazole-piperazine-quinazolinone-fused N-heterocyclic scaffolds is reported. In this strategy, a tandem approach of two highly efficient synthetic reactions, click and cross-dehydrogentive coupling reactions, with high atom economy were employed to obtain the target N-fused scaffolds. Being highly functional group tolerable, this method has broad substrate scope. Interestingly, some of these derivatives showed strong white solid-state fluorescence.

Palladium-Catalyzed Synthesis of Tricyclic Indoles via a N-S Bond Cleavage Strategy

In palladium/norbornene (Pd/NBE) chemistry, the "ortho effect" has been proven to be a key factor in the process of β-carbon elimination to extrude NBE. Herein, we found that the o-iodoaniline protected by a p-methoxybenzenesulfonyl group can recover the "ortho effect" and then undergo N-S bond cleavage with vinyl palladium, thus achieving a highly selective C-N coupling reaction in the Catallani-Lautens reaction system. On the basis of this discovery, a one-step synthesis of highly functionalized tricyclic indole derivatives was realized.

Pd-Catalyzed Indole Synthesis via C-H Activation and Bisamination Sequence with Diaziridinone

This work describes an efficient Pd-catalyzed indole synthesis. A wide variety of indoles can be obtained in good yields from readily available vinyl bromides. The reaction likely proceeds through a sequential aryl C-H activation and bisamination of a resulting pallada(II)cycle with diaziridinone.

Palladium-Catalyzed anti-Carbosilylation of Alkynes to Access Isoquinolinone-Containing Exocyclic Vinylsilanes

A Pd-catalyzed trans-selective carbosilylation reaction of alkynes has been developed. The trans-vinylpalladium species, generated through intramolecular syn-carbopalladation of alkynes and subsequent cis-trans isomerization, were captured by hexamethyldisilane to form multisubstituted vinylsilanes. This reaction provides a useful strategy for the stereoselective synthesis of isoquinolinone-containing exocyclic tetrasubstituted vinylsilanes.

Mechanistic Studies of the Pd- and Pt-Catalyzed Selective Cyclization of Propargyl/Allenyl Complexes

Following the discovery of an unusual transition-metal-catalyzed reaction, the elucidation of the underlying mechanism is essential to understand the characteristic reactivity of the metal. We previously reported a synthetic method for tricyclic indoles using Pt-catalyzed Friedel-Crafts-type C-H coupling. In this reaction, the Pt catalyst selectively formed a seven-membered ring, but the Pd catalyst only afforded a six-membered ring. However, the reasons for the different selectivities caused by Pd and Pt were unclear. We performed density functional theory (DFT) calculations and experimental studies to reveal the origin of the different behaviors of the two metals. The calculations revealed that the formation of the six- and seven-membered rings proceeds via η¹-allenyl and η³-propargyl/allenyl complexes, respectively. A molecular orbital analysis of the η³-propargyl/allenyl complex revealed that, for the platinum complex, the energy required to convert the unoccupied molecular orbital on the reactive carbon into the lowest unoccupied molecular orbital (LUMO) was lower than that for the palladium complex. In addition, DFT calculations revealed that the combination of platinum and bis[2-(diphenylphosphino)phenyl] ether (DPEphos) reduced the activation energy of the seven-membered cyclization in comparison with palladium or PPh₃. Additional experimental studies, including NMR studies and stoichiometric reactions, support the aforementioned examination.

Synthesis and biological evaluation of 3,4-dihydro-1H-[1,4] oxazepino [6,5,4-hi] indol-1-ones and 4,6-dihydrooxepino [5,4,3-cd] indol-1(3H)-ones as Mycobacterium tuberculosis inhibitors

This study focuses on the synthesis of 1,7- and 3,4-indole-fused lactones via a simple and efficient reaction sequence. The functionalization of these "oxazepino-indole" and "oxepino-indole" tricycles is carried out by palladium catalysed CC coupling, nucleophilic substitution or 1,3-dipolar cycloaddition. The evaluation of their activity against Mycobacterium tuberculosis shows that the "oxazepino-indole" structure is a new inhibitor of M. tuberculosis growth in vitro.

Palladium-Catalyzed Sequential C-H Activation/Amination with Diaziridinone: An Approach to Indoles

Indoles are an important class of molecules. This paper describes an efficient palladium-catalyzed synthesis of indoles from 2-iodostyrenes and di-t-butyldiaziridinone with a simultaneous installation of two C-N bonds. The reaction process likely proceeds through the oxidative insertion of Pd to aryl iodide and subsequent vinyl C-H activation to from a pallada(II)cycle intermediate, which is bisaminated by di-t-butyldiaziridinone to give the indole product.

Domino C-N Bond Formation via a Palladacycle with Diaziridinone. An Approach to Indolo[3,2-b]indoles

Palladium-catalyzed C-N bond formation is one of the widely used transformations for the synthesis of structurally diverse N-heterocycles. This work describes an efficient palladium-catalyzed multiple-C-N bond formation reaction for the synthesis of highly π-conjugated N-heterocycles, indolo[3,2-b]indoles with di-tert-butyldiaziridinone. The reaction likely proceeds through the initial formation of an indole-fused palladacycle by nucleophilic aminopalladation and subsequent bisamination to give indolo[3,2-b]indoles.

Nonbiomimetic total synthesis of indole alkaloids using alkyne-based strategies

Biomimetic natural product synthesis is generally straightforward and efficient because of its established feasibility in nature and utility in comprehensive synthesis, and the cost-effectiveness of naturally derived starting materials. On the other hand, nonbiomimetic strategies can be an important option in natural product synthesis since (1) nonbiomimetic synthesis offers more flexibility and can demonstrate the originality of chemists, and (2) the structures of derivatives accessible by nonbiomimetic synthesis can be considerably different from those that are synthesised in nature. This review summarises nonbiomimetic total syntheses of indole alkaloids using alkyne chemistry for constructing core structures, including ergot alkaloids, monoterpene indole alkaloids (mainly corynanthe, aspidosperma, strychnos, and akuammiline), and pyrroloindole and related alkaloids. To clarify the differences between alkyne-based strategies and biosynthesis, the alkynes in nature and the biosyntheses of indole alkaloids are also outlined.

C–H hetero-functionalization of arenes through palladacyclopentane-type intermediates

In this review article, we summarized recent advances in C–H hetero-functionalization of arenes through palladacyclopentane-type intermediates.

Recent Advances in Enzymatic and Chemoenzymatic Cascade Processes

Cascade reactions have been described as efficient and universal tools, and are of substantial interest in synthetic organic chemistry. This review article provides an overview of the novel and recent achievements in enzyme cascade processes catalyzed by multi-enzymatic or chemoenzymatic systems. The examples here selected collect the advances related to the application of the sequential use of enzymes in natural or genetically modified combination; second, the important combination of enzymes and metal complex systems, and finally we described the application of biocatalytic biohybrid systems on in situ catalytic solid-phase as a novel strategy. Examples of efficient and interesting enzymatic catalytic cascade processes in organic chemistry, in the production of important industrial products, such as the designing of novel biosensors or bio-chemocatalytic systems for medicinal chemistry application, are discussed

Recent Advances in Construction of Polycyclic Natural Product Scaffolds via One-Pot Reactions Involving Alkyne Annulation

Polycyclic scaffolds are omnipresent in natural products and drugs, and the synthetic strategies and methods toward construction of these scaffolds are of particular importance. Compared to simple cyclic ring systems, polycyclic scaffolds have higher structure complexity and diversity, making them suitable for charting broader chemical space, yet bringing challenges for the syntheses. In this review, we surveyed progress in the past decade on synthetic methods for polycyclic natural product scaffolds, in which the key steps are one-pot reactions involving intermolecular or intramolecular alkyne annulation. Synthetic strategies of selected polycyclic carbocycles and heterocycles with at least three fused, bridged, or spiro rings are discussed with emphasis on the synthetic efficiency and product diversity. Recent examples containing newly developed synthetic concepts or toolkits such as collective and divergent total synthesis, gold catalysis, C–H functionalization, and dearomative cyclization are highlighted. Finally, several “privileged synthetic strategies” for “privileged polycyclic scaffolds” are summarized, with discussion of remained challenges and future perspectives.

Recent Advances in Palladium-Catalyzed Bridging C–H Activation by Using Alkenes, Alkynes or Diazo Compounds as Bridging Reagents

Transition-metal-catalyzed direct inert C–H bond functionalization has attracted much attention over the past decades. However, because of the high strain energy of the suspected palladacycle generated via C–H bond palladation, direct functionalization of a C–H bond less than a three-bond distance from a catalyst center is highly challenging. In this short review, we summarize the advances on palladium-catalyzed bridging C–H activation, in which an inert proximal C–H bond palladation is promoted by the elementary step of migratory insertion of an alkene, an alkyne or a metal carbene intermediate.

1 Introduction

2 Palladium-Catalyzed Alkene Bridging C–H Activation

2.1 Intramolecular Reactions

2.2 Intermolecular Reactions

3 Palladium-Catalyzed Alkyne Bridging C–H Activation

3.1 Intermolecular Reactions

3.2 Intramolecular Reactions

4 Palladium-Catalyzed Carbene Bridging C–H Activation

5 Conclusion and Outlook

Palladium-Catalyzed [2 + 2 + 1] Annulation of Alkyne-Tethered Aryl Iodides with Diaziridinone: Synthesis of 3,4-Fused Tricyclic Indoles

A novel palladium-catalyzed [2 + 2 + 1] annulation of alkyne-tethered aryl iodides with diaziridinone was developed, leading to the formation of 3,4-fused tricyclic indoles. From a mechanistic standpoint, the formation of fused tricyclic indole scaffolds involved C,C-palladacycles, which were synthesized through the intramolecular reaction of aryl halides and alkynes. The cascade reaction described herein could be carried out with a broad range of substrates and provided various 3,4-fused tricyclic indoles with yields up to 98%.