Redox Potential Controlled Selective Oxidation of Styrenes for Regio- and Stereoselective Crossed Intermolecular [2 + 2] Cycloaddition via Organophotoredox Catalysis

Characterization of a Lewis adduct in its inner and outer forms

The entrance channel of bimolecular reactions sometimes involves the formation of outer complexes as weakly bound, fleeting intermediates. Here, we characterize such an outer complex in a system that models the bimolecular, C-O bond-forming reaction of a phosphine oxide Lewis base with a carbenium Lewis acid. Crystallographic studies show that the C-O distance in the outer form exceeds that of the final or inner adduct by 1.1 angstroms. As the system samples the two forms of the complex, which correspond to minima on the corresponding potential energy surface, the C-O linkage switches from a secondary interaction in the outer complex to a dative bond in the inner complex. This phenomenon is harnessed as a functional feature to stabilize xanthylium-based photoredox catalysts.

A direct oxidative esterification of aldehydes with alcohols mediated by photochemical C-H bromination

The photochemical direct esterification of aldehydes with alcohols via in situ-generated acyl-bromides presented in this report is an attractive complementary addition to hitherto reported methods, as these are usually carried out in a two-step, one-pot procedure in order to avoid side reactions such as the oxidation of alcohols by halogen sources.

Sulfur-Bridged Cationic Diazulenomethenes: Formation of Charge-Segregated Assembly with High Charge-Carrier Mobility

Sulfur-bridged cationic diazulenomethenes were synthesized and exhibited high stability even under basic conditions due to the delocalization of positive charge over the whole π-conjugated skeleton. As a result of the effective delocalization and the absence of orthogonally oriented bulky substituents, the cationic π-conjugated skeletons formed a π-stacked array with short interfacial distances. A derivative with SbF6- as a counter anion formed a charge-segregated assembly in the crystalline state, rather than the generally favored charge-by-charge arrangement of oppositely charged species based on electrostatic interactions. Theoretical calculations suggested that the destabilization caused by electrostatic repulsion between two positively charged π-conjugated skeletons is compensated by the dispersion forces. In addition, the counter anion SbF6- played a role in regulating the molecular alignment through F⋯H-C and F-S interactions, which resulted in the charge-segregated alignment of the cationic π-skeletons. This characteristic assembled structure gave rise to a high charge-carrier mobility of 1.7 cm2 V-1 s-1 as determined using flash-photolysis time-resolved microwave conductivity.

Artificial Photosynthases: Single-Chain Nanoparticles with Manifold Visible-Light Photocatalytic Activity for Challenging "in Water" Organic Reactions

Photocatalyzed reactions of organic substances in aqueous media are challenging transformations, often because of scarce solubility of substrates and catalyst deactivation. Herein, we report single-chain nanoparticles, SCNPs, capable of efficiently catalyzing four different "in water" organic reactions by employing visible light as the only external energy source. Specifically, we decorated a high-molecular-weight copolymer, poly(OEGMA300-r-AEMA), with iridium(III) cyclometalated complex pendants at varying content amounts. The isolated functionalized copolymers demonstrated self-assembly into noncovalent, amphiphilic SCNPs in water, which enabled efficient visible-light photocatalysis of two reactions unprecedentedly reported in water, namely, [2 + 2] photocycloaddition of vinyl arenes and α-arylation of N-arylamines. Additionally, aerobic oxidation of 9-substituted anthracenes and β-sulfonylation of α-methylstyrene were successfully carried out in aqueous media. Hence, by merging metal-mediated photocatalysis and SCNPs for the fabrication of artificial photoenzyme-like nano-objects─i.e., artificial photosynthases (APS)─our work broadens the possibilities for performing challenging "in water" organic transformations via visible-light photocatalysis.

Nucleophilic Organocatalyst for Photochemical Carbon Radical Generation via SN2 Substitution

Photochemical generation of radicals is a powerful way to construct various molecules. But most of these methods rely on initiators or the redox properties of radical precursors. Herein, we report a photochemical organic catalyst that reacts with benzyl halide to generate carbon radical via an SN2 pathway. This nucleophilic catalyst can be easily prepared and is bench-stable. The SN2 process does not rely on the redox properties of halides, showing potential synthetic utility. Control experiments and UV-vis spectroscopic analysis indicate that the SN2 substitution adduct is the key intermediate.

Visible-Light [4+2] Homodimerization of Decomposition-Prone Styrenes via Electron Transfer Catalysis of Diaryl Diselenides

The facile electron transfer catalysis of diaryl diselenides was utilized for the visible-light [4+2] homodimerization of decomposition-prone styrenes. The reaction required only 0.5 mol % TPT+BF4- photocatalyst and 1.5 mol % electron transfer catalyst (ArSe)2. The spontaneous electron transfer capability of diaryl diselenides was demonstrated for the first time, leading to the sequestration of redox-prone radical cation intermediates via electron transfer processes. A variety of polymerization-prone styrenes smoothly underwent the visible-light-promoted [4+2] homodimerization to tetralin derivatives.

Strongly reducing helical phenothiazines as recyclable organophotoredox catalysts

Recyclable phenothiazine organophotoredox catalysts (PTHS 1-3, E1/2ox* = -2.34 to -2.40 V vs. SCE) have been developed. When the recycling performance was evaluated, PTHS-1 could be recovered at least four times without loss of its catalytic activity. These recyclable organophotoredox catalysts represent a promising tool for sustainable organic synthesis.

Consecutive π-Lewis acidic metal-catalysed cyclisation/photochemical radical addition promoted by in situ generated 2-benzopyrylium as the photoredox catalyst

A π-Lewis acidic metal-catalysed cyclisation/photochemical radical addition sequence was developed, which utilises in situ generated 2-benzopyrylium cation intermediates as photoredox catalysts and electrophilic substrates to form 1H-isochromene derivatives in good yields in most cases. The key 2-benzopyrylium intermediates were generated through the activation of the alkyne moiety of ortho-carbonyl alkynylbenzene derivatives by such π-Lewis acidic metal catalysts as AgNTf2 and Cu(NTf2)2, and the subsequent intramolecular cyclisation and proto-demetalation using trifluoroacetic acid. Further photo-excitation of the 2-benzopyrylium intermediates facilitated single-electron transfer from a benzyltrimethylsilane derivative as a donor molecule to promote the radical addition of arylmethyl radicals to the 2-benzopyrylium intermediates.

Atom Transfer Radical Addition Reactions of Quinoxalin-2(1H)-ones with CBr4 and Styrenes Using Mes-Acr-MeClO4 Photocatalyst

The atom transfer radical addition (ATRA) reaction is defined as a method for introducing halogenated compounds into alkenes via a radical mechanism. In this study, we present an ATRA approach for achieving regioselective functionalization of quinoxalin-2(1H)-ones by activating C-Br bonds of CBr4 and subsequent trihaloalkyl-carbofunctionalization of styrenes employing the 9-mesityl-10-methylacridinium perchlorate (Fukuzumi) photocatalyst under 3W blue LED (450-470 nm) irradiation. This three-component radical cascade process demonstrates remarkable efficiency in the synthesis of 1-methyl-3-(3,3,3-tribromo-1-(4-chlorophenyl)propyl)quinoxalin-2(1H)-one derivatives.

Electrochemical Cycloaddition Reactions of Alkene Radical Cations: A Route toward Cyclopropanes and Cyclobutanes

Herein, we describe a mild and efficient electrochemical method for cycloaddition reactions of alkene radical cations. Anodic oxidation of olefins produces electrophilic alkene radical cations, which further react with either diazo compounds in a [2 + 1] cycloaddition toward cyclopropane synthesis, or styrene derivatives in a [2 + 2] cycloaddition producing cyclobutanes. Both processes are green, metal- and catalyst-free, and scalable and tolerate a broad range of electron-rich olefins.

Asymmetric counteranion-directed photoredox catalysis

Photoredox catalysis enables distinctive and broadly applicable chemical reactions, but controlling their selectivity has proven to be difficult. The pursuit of enantioselectivity is a particularly daunting challenge, arguably because of the high energy of the activated radical (ion) intermediates, and previous approaches have invariably required pairing of the photoredox catalytic cycle with an additional activation mode for asymmetric induction. A potential solution for photoredox reactions proceeding via radical ions would be catalytic pairing with enantiopure counterions. However, although attempts toward this approach have been described, high selectivity has not yet been accomplished. Here we report a potentially general solution to radical cation-based asymmetric photoredox catalysis. We describe organic salts, featuring confined imidodiphosphorimidate counteranions that catalyze highly enantioselective [2+2]-cross cycloadditions of styrenes.

Rapid access to polycyclic thiopyrylium compounds from unfunctionalized aromatics by thia-APEX reaction

We developed a sulfur-embedding annulative π-extension (thia-APEX) reaction that could construct a sulfur-embedding cationic hexagonal aromatic ring, thiopyrylium, onto unfunctionalized aromatics in one step. The key of thia-APEX is the use of S-imidated ortho-arenoyl arenethiols, and a variety of π-extended thiopyryliums can easily be synthesized. The synthesized thiopyryliums showed diverse absorption and emission properties over the visible light to NIR region, depending on minor structural differences.

Organophotocatalytic [2+2] Cycloaddition of Electron-Deficient Styrenes

A visible-light organophotocatalytic [2+2] cycloaddition of electron-deficient styrenes is described. Photocatalytic [2+2] cycloadditions are typically performed with electron-rich styrene derivatives or α,β-unsaturated carbonyl compounds, and with transition-metal-based catalysts. We have discovered that an organic cyanoarene photocatalyst is able to deliver high-value cyclobutane products bearing electron-deficient aryl substituents in good yields. A range of electron-deficient substituents are tolerated, and both homodimerisations and intramolecular [2+2] cycloadditions to fused bicyclic systems are available by using this methodology.

Chemoenzymatic Hunsdiecker-Type Decarboxylative Bromination of Cinnamic Acids

In this contribution, we report chemoenzymatic bromodecarboxylation (Hunsdiecker-type) of α,ß-unsaturated carboxylic acids. The extraordinarily robust chloroperoxidase from Curvularia inaequalis (CiVCPO) generated hypobromite from H₂O₂ and bromide, which then spontaneously reacted with a broad range of unsaturated carboxylic acids and yielded the corresponding vinyl bromide products. Selectivity issues arising from the (here undesired) addition of water to the intermediate bromonium ion could be solved by reaction medium engineering. The vinyl bromides so obtained could be used as starting materials for a range of cross-coupling and pericyclic reactions.

Moderately Oxidizing Thioxanthylium Organophotoredox Catalysts for Radical-Cation Diels-Alder Reactions

Moderately oxidizing thioxanthylium photoredox catalysts that operate under irradiation with green light have been developed. These catalysts exhibit relatively moderate excited-state reduction potentials [E_1/2(C*/C^•-) = 1.75-1.94 V vs saturated calomel electrode (SCE)] and can efficiently promote radical-cation Diels-Alder reactions under irradiation with green light. Interestingly, β-halogenostyrenes (E_p/2 = 1.57-1.61 V vs SCE) are well tolerated, affording synthetically useful halocyclohexenes.

Phosphine-Mediated Morita-Baylis-Hillman-Type/Wittig Cascade: Access to E-Configured 3-Styryl- and 3-(Benzopyrrole/furan-2-yl) Quinolinones

A phosphine-mediated, well-designed Morita-Baylis-Hillman-type/Wittig cascade for the rapid assembly of a quinolinone framework from benzaldehyde derivatives is developed for the first time. By rationally combining I₂/NIS-mediated cyclization, biologically relevant 3-(benzopyrrole/furan-2-yl) quinolinones were facilely synthesized in a one-pot process by starting from 3-styryl-quinolinones bearing an o-hydroxy/amino group, significantly expanding the chemical space of this privileged skeleton. Further utility of this protocol is illustrated by successfully performing this transformation in a catalytic manner through in situ reduction of phosphine oxide by phenylsilane.

A new cycloaddition profile for ortho-quinone methides: photoredox-catalyzed [6+4] cycloadditions for synthesis of benzo[b]cyclopenta[e]oxepines

Visible-light-induced [6+4] cycloaddition reactions of ortho-quinone methides have been developed. The reaction of ortho-quinone methides with pentafulvenes in the presence of a thioxanthylium photoredox catalyst afforded benzo[b]cyclopenta[e]oxepines. The present reaction represents a promising tool for the synthesis of natural products and bioactive compounds that contain a benzoxepine structure.

Recent Visible Light and Metal Free Strategies in [2+2] and [4+2] Photocycloadditions

When aiming to synthesize molecules with elevated molecular complexity starting from relatively simple starting materials, photochemical transformations represent an open avenue to circumvent analogous multistep procedures. Specifically, light-mediated cycloadditions remain as powerful tools to generate new bonds begotten from non-very intuitive disconnections, that alternative thermal protocols would not offer. In response to the current trend in both industrial and academic research pointing towards green and sustainable processes, several strategies that meet these requirements are currently available in the literature. This Minireview summarizes [2+2] and [4+2] photocycloadditions that do not require the use of metal photocatalysts by means of alternative strategies. It is segmented according to the cycloaddition type in order to give the reader a friendly approach and we primarily focus on the most recent developments in the field carried out using visible light, a general overview of the mechanism in each case is offered as well.

Stereoselective Synthesis of Cyclohepta[b]indoles by Visible-Light-Induced [2+2]-Cycloaddition/retro-Mannich-type Reactions

A novel method for the concise synthesis of cyclohepta[b]indoles in high yields was developed. The method involves a visible-light-induced, photocatalyzed [2+2]-cycloaddition/ retro-Mannich-type reaction of enaminones. Experimental and computational studies suggested that the reaction is a photoredox process initiated by single-electron oxidation of an enaminone moiety, which undergoes subsequent cyclobutane formation and rapidly fragmentation in a radical-cation state to form cyclohepta[b]indoles.