Schiff Base Cobalt(II) Complex-Catalyzed Highly Markovnikov-Selective Hydrosilylation of Alkynes

Metal-catalyzed Markovnikov-type selective hydrofunctionalization of terminal alkynes

Metal-catalyzed highly Markovnikov-type selective hydrofunctionalization of terminal alkynes provides a straightforward and atom-economical route to access 1,1-disubstituted alkenes, which have a wide range of applications in organic synthesis. However, the highly Markovnikov-type selective transformations are challenging due to the electronic and steric effects during the addition process. With the development of metal-catalyzed organic synthesis, different metal catalysts have been developed to solve this challenge, especially for platinum group metal catalysts. In this perspective, we review homogeneous metal-catalyzed Markovnikov-type selective hydrofunctionalization of terminal alkynes according to the classified element types as well as reaction mechanisms. Future avenues for investigation are also presented to help expand this exciting field.

Unveiling the Reactivity of Part Per Million Levels of Cobalt-Salen Complexes in Hydrosilylation of Ketones

A series of air-stable cobalt(III)salen complexes Co-1 to Co-4 have been synthesized and employed in the hydrosilylation of ketones. Notably, the most intricately tailored Co-3 pre-catalyst exhibited exceptional catalytic activity under mild reaction conditions. The developed catalytic hydrosilylation protocol proceeded with an unusual ppm level (5 ppm) catalyst loading of Co-3 and achieved a maximum turnover number (TON) of 200,000. A wide variety of aromatic, aliphatic, and heterocyclic ketones encompassing both electron-donating and electron-withdrawing substituents were successfully transformed into the desired silyl ethers or secondary alcohols in moderate to excellent yields.

Cationic N,S-chelate half-sandwich iridium complexes: synthesis, characterization, anticancer and antiplasmodial activity

A series of pyrazole-based ligands and their corresponding cationic N,S-chelate half-sandwich iridium complexes were successfully synthesized. All iridium complexes exhibited good anticancer activity against the MCF-7 and MDA-MB-231 human breast cancer cells. The cytotoxic activity of unsubstituted iridium complex 1 is greater than that of cisplatin against MCF-7 cells. In addition, the cationic half-sandwich iridium complexes are also efficient in antiplasmodial study and complex 1 displayed the best activity as its IC50 was observed to be approximately 0.11 μM against the CQS-NF54 strain. These iridium complexes generally exhibited enhanced activity against the CQS-NF54 strain in comparison with that against the CQR-K1 strain. An "IC50 speed assay" investigation against the CQS-NF54 strain indicated complexes 1-3 to be fast-acting complexes that reach their lowest IC50 values within 16 hours. All complexes were fully characterized by IR spectroscopy, NMR spectroscopy, and elemental analysis, and the structure of the iridium complex was confirmed by single-crystal X-ray diffraction.

Unexpected structural complexity of d-block metallosupramolecular architectures within the benzimidazole-phenoxo ligand scaffold for crystal engineering aspects

Design of metallosupramolecular materials encompassing more than one kind of supramolecular interaction can become deceptive, but it is necessary to better understand the concept of the controlled formation of supramolecular systems. Herein, we show the structural diversity of the bis-compartmental phenoxo-benzimidazole ligand H3L1 upon self-assembly with variety of d-block metal ions, accounting for factors such as: counterions, pH, solvent and reaction conditions. Solid-state and solution studies show that the parent ligand can accommodate different forms, related to (de)protonation and proton-transfer, resulting in the formation of mono-, bi- or tetrametallic architectures, which was also confirmed with control studies on the new mono-compartmental phenoxo-benzimidazole H2L2 ligand analogue. For the chosen architectures, structural variables such as porous character, magnetic behaviour or luminescence studies were studied to demonstrate how the form of H3L1 ligand affects the final form of the supramolecular architecture and observed properties. Such complex structural variations within the benzimidazole-phenoxo-type ligand have been demonstrated for the first time and this proof-of-concept can be used to integrate these principles in more sophisticated architectures in the future, combining both the benzimidazole and phenoxide subunits. Ultimately, those principles could be utilized for targeted manipulation of properties through molecular tectonics and crystal engineering aspects.

Hydrosilylation of Terminal Alkynes Catalyzed by an Air-Stable Manganese-NHC Complex

In recent years, catalysis with base metal manganese has received a significant amount of interest. Catalysis with manganese complexes having N-heterocyclic carbenes (NHCs) is relatively underdeveloped in comparison to the extensively investigated manganese catalysts possessing pincer ligands (particularly phosphine-based ligands). Herein, we describe the synthesis of two imidazolium salts decorated with picolyl arms (L₁ and L₂) as NHC precursors. Facile coordination of L₁ and L₂ with MnBr(CO)₅ in the presence of a base resulted in the formation manganese(I)-NHC complexes (1 and 2) as an air-stable solid in good isolated yield. Single-crystal X-ray analysis revealed the structure of the cationic complexes [Mn(CO)₃(NHC)][PF₆] with tridentate N,C,N binding of the NHC ligand in a facile fashion. Along with a few known manganese(I) complexes, these Mn(I)-NHC complexes 1 and 2 were tested for the hydrosilylation of terminal alkynes. Complex 1 was proved to be an effective catalyst for the hydrosilylation of terminal alkynes with good selectivity toward the less thermodynamically stable β-(Z)-vinylsilanes. This method provided good regioselectivity (anti-Markovnikov addition) and stereoselectivity (β-(Z)-product). Experimental evidence suggested that the present hydrosilylation pathway involved an organometallic mechanism with manganese(I)-silyl species as a possible reactive intermediate.

Recyclable TPA-Modified MIL-88-Supported Ionic Pt as a Highly Efficient Catalyst for Alkene Hydrosilylation

The hydrosilylation reaction driven by a homogeneous catalyst has been widely used in the industrial synthesis of functionalized silicone compounds. However, the homogeneous catalyst for hydrosilylation has the shortcomings of nonrecyclability, undesirable side reactions, and high cost. In this work, a highly efficient heterogeneous catalyst was prepared by loading Pt ions on MIL-88 modified with trimethoxy[3-(phenylamino)propyl]silane. In comparison with previous research studies, the resulting catalyst can exhibit high catalytic activity and excellent stability during the hydrosilylation reaction, which was attributed to the presence of a pyrrolic nitrogen structure between TPA-MIL-88 and the Pt ion. Besides them, 1.2%Pt/TPA-MIL-88 showed the highest catalytic activity and can be reused five times without significant deactivation. Importantly, 1.2%Pt/TPA-MIL-88 also achieved satisfactory results when it was used to catalyze the hydrosilylation reaction for other olefins, implying great potential for application in the silicone industry.

Bulky NHC–Cobalt Complex-Catalyzed Highly Markovnikov-Selective Hydrosilylation of Alkynes

The hydrosilylation of alkynes is one of the most attractive and, at the same time, most challenging catalytic transformations, usually demanding the use of noble transition metals. We describe a catalytic system, based on cobalt(0) complex and bulky N-heterocyclic carbene (NHC) ligands, permitting the highly effective hydrosilylation of a broad scope of alkynes and silanes. The application of bulky NHC ligands allowed a decrease in the amount of cobalt necessary for an effective reaction run to 2.5 mol% and provided excellent selectivity towards challenging α-vinylsilanes. The developed method tolerates a number of substituted aryl, alkyl, and silyl acetylenes. Moreover, it is suitable for both tertiary and secondary silanes. Our findings confirm that steric hindrance around the metal center can effectively increase the activity of a catalyst and ensure better selectivity than those of analogous complexes bearing smaller ligands.

Cobalt-Catalyzed Regiodivergent Double Hydrosilylation of Arylacetylenes

Double hydrosilylation of alkynes represents a straightforward method to synthesize bis(silane)s, yet it is challenging if α-substituted vinylsilanes act as the intermediates. Here, a cobalt-catalyzed regiodivergent double hydrosilylation of arylacetylenes is reported for the first time involving this challenge, accessing both vicinal and geminal bis(silane)s with exclusive regioselectivity. Various novel bis(silane)s containing Si-H bonds can be easily obtained. The gram-scale reactions could be performed smoothly. Preliminarily mechanistic studies demonstrated that the reactions were initiated by cobalt-catalyzed α-hydrosilylation of alkynes, followed by cobalt-catalyzed β-hydrosilylation of the α-vinylsilanes to deliver vicinal bis(silane)s, or hydride-catalyzed α-hydrosilylation to give geminal ones. Notably, these bis(silane)s can be used for the synthesis of high-refractive-index polymers (n_d up to 1.83), demonstrating great potential utility in optical materials.

Markovnikov-selective double hydrosilylation of challenging terminal aryl alkynes under cobalt and iron catalysis

Geminal bis(silanes) are unique compounds with interesting properties. The most straightforward way to access them is double hydrosilylation of alkynes, which was established only recently. Previous articles about transition metal-catalysed double hydrosilylation show that terminal aryl alkynes are a challenge. We report on cobalt(II) and iron(III) complexes with the easy-to-synthesise N,N,N-tridentate hydrazone ligand being active precatalysts in Markovnikov-selective double hydrosilylation of terminal aryl alkynes. The influence of the hydrazone ligand structure and the potential role of the sodium triethylborohydride activator were studied. Sets of geminal bis(silanes) with two identical or different silyl groups were synthesised, showing the applicability of the reported method.

Stereoselective Semi-Hydrogenations of Alkynes by First-Row (3d) Transition Metal Catalysts

The chemo- and stereoselective semi-hydrogenation of alkynes to alkenes is a fundamental transformation in synthetic chemistry, for which the use of precious 4d or 5d metal catalysts is well-established. In mankind's unwavering quest for sustainability, research focus has considerably veered towards the 3d metals. Given their high abundancy and availability as well as lower toxicity and noxiousness, they are undoubtedly attractive from both an economic and an environmental perspective. Herein, we wish to present noteworthy and groundbreaking examples for the use of 3d metal catalysts for diastereoselective alkyne semi-hydrogenation as we embark on a journey through the first-row transition metals.

Cobalt-catalyzed alkyne hydrosilylation as a new frontier to selectively access silyl-hydrocarbons

The hydrosilylation of alkynes is a chief chemical method for accessing a range of alkenylsilanes, which can be derivatized to obtain value-added hydrocarbons and utilized in diverse applications. While noble metal-based catalytic procedures have shown great success in accessing vinylsilanes within the context of both academia and industry, replacing the noble metals with cheaper and more abundant base metals has recently drawn significant interest due to their catalytic sustainability and competencies including unprecedented reactivity that could expand chemical tools for accessing other types of silicon-containing hydrocarbons. During the past few years, a number of well-defined, robust cobalt-catalyst platforms that broadly operate either the Chalk-Harrod or a modified Chalk-Harrod mechanism have emerged as a new frontier in the field of selective alkyne hydrosilylation. This review describes the main features of cobalt catalyst systems recently documented for the hydrosilylation of alkynes with a strong emphasis on ligand design and reaction pathways involving Co-H and/or Co-silyl species-mediated elementary transformations to achieve Markovnikov/anti-Markovnikov hydrosilylations as well as new migratory transformations.

Regio- and Stereoselective Syn-Boronation of Terminal Alkynes Catalyzed by Copper Nanospheres on Graphene Nanosheets

Evenly distributed copper nanospheres on reduced graphene oxide were prepared and showed high heterogeneous catalytic activity in converting varying terminal alkynes into (E)-β-styrene boronate esters. The excellent catalytic performance was achieved through the synergistic catalysis between Cu nanospheres and rGO. This work not only is a supplement for preparing (E)-β-styrene boronate esters but also provides a way for the rational designing of high-performance graphene-based catalysts. Meanwhile, the advancement of graphene-based nanomaterials will be motivated to promote their applications in the development of green catalytic chemistry.

Cobalt-Catalyzed Dehydrogenative C-H Silylation of Alkynylsilanes

Herein, we report that a cobalt catalyst permits the general synthesis of substituted alkynylsilanes through dehydrogenative coupling of alkynylsilanes and hydrosilanes. Several silylated alkynes, including di‐ and trisubstituted ones, were prepared in a one‐step procedure. Thirty‐seven compounds were synthesized for the first time by applying our catalyst system. The alkynylsilanes bearing hydrosilyl moieties provide an opportunity for further functionalization (e. g., hydrosilylation). The use of primary silanes as substrates and precatalyst activators permits the use of inexpensive and easily accessible 3d metal precatalysts, and avoids the presence of additional activators.

From fluorogens to fluorophores by elucidation and suppression of ultrafast excited state processes of a Schiff base

Strategies have been explored for developing strongly fluorescent species out of a weakly fluorescent Schiff base, 2-(((pyridin-2-ylmethyl)imino)methyl)phenol (salampy). The locally excited enolic state of salampy undergoes an intramolecular proton transfer with a time constant of ca. 200 fs. The emissive cis keto state thus formed decays completely within 50 ps. Its fast decay and miniscule fluorescence quantum yield are attributed to efficient non-radiative channels associated with conformational relaxation. The anionic form, salampy^-, has a significantly longer fluorescence lifetime of 800 ps. Its emissive state evolves in tens of picoseconds, from the locally excited state, by solvent and conformational relaxation. Both the neutral and anionic forms have a fluorescence lifetime of about 6 ns at 77 K, a temperature at which all activated nonradiative channels are blocked. This lifetime is similar to that obtained at room temperature, upon rigidification of the anion by complexation with Zn²⁺. Two such complexes have been studied. The first is binuclear, with acetate bridge between the two Zn²⁺ ions. The second, with ClO₄^- as the counterion, is mononuclear with two salampy ligands ligating the metal ion. Unlike a previous report on a different Schiff base, in which the ligands are π-stacked in its dimeric Zn²⁺ complex, no additional nonradiative deactivation pathway opens up in the Zn complexes of salampy, which are devoid of such stacking. The complex of salampy with Al³⁺ has an even longer fluorescence lifetime of 9 ns, indicating a greater degree of rigidification and consequent suppression of nonradiative processes.

Transition-Metal-Catalyzed Stereo- and Regioselective Hydrosilylation of Unsymmetrical Alkynes

Alkyne hydrosilylation is one of the most efficient methods for the synthesis of alkenyl silicon derivatives and has been a hot topic of research for decades. This short review summarizes the progress in transition-metal-catalyzed stereo- and regioselective hydrosilylation of unsymmetrical alkynes. Topics are discussed based on different types of alkynes and the selectivities.

1 Introduction

2 Terminal Alkyne Hydrosilylation

2.1 β-E Selectivity

2.2 β-Z Selectivity

2.3 α-selectivity

3 Internal Alkyne Hydrosilylation

3.1 Aryl–Alkyl Acetylenes

3.2 Alkyl–Alkyl Acetylenes

3.3 Internal Alkynes with Polarized Substituents

4 Summary and Outlook

Markovnikov Hydrosilylation of Alkynes with Tertiary Silanes Catalyzed by Dinuclear Cobalt Carbonyl Complexes with NHC Ligation

Metal-catalyzed hydrosilylation of alkynes is an ideal atom-economic method to prepare vinylsilanes that are useful reagents in the organic synthesis and silicone industry. Although great success has been made in the preparation of β-vinylsilanes by metal-catalyzed hydrosilylation reactions of alkynes, reported metal-catalyzed reactions for the synthesis of α-vinylsilanes suffer from narrow substrate scope and/or poor selectivity. Herein, we present selective Markovnikov hydrosilylation reactions of terminal alkynes with tertiary silanes using a dicobalt carbonyl N-heterocyclic carbene (NHC) complex [(IPr)₂Co₂(CO)₆] (IPr = 1,3-di(2,6-diisopropylphenyl)imidazol-2-ylidene) as catalyst. This cobalt catalyst effects the hydrosilylation of both alkyl- and aryl-substituted terminal alkynes with a variety of tertiary silanes with good functional group compatibility, furnishing α-vinylsilanes with high yields and high α/β selectivity. Mechanistic study revealed that the stoichiometric reactions of [(IPr)₂Co₂(CO)₆] with PhC≡CH and HSiEt₃ can furnish the dinuclear cobalt alkyne and mononuclear cobalt silyl complexes [(IPr)(CO)₂Co(μ-η²:η²-HCCPh)Co(CO)₃], [(IPr)(CO)₂Co(μ-η²:η²-HCCPh)Co(CO)₂(IPr)], and [(IPr)Co(CO)₃(SiEt₃)], respectively. Both dicobalt bridging alkyne complexes can react with HSiEt₃ to yield α-triethylsilyl styrene and effect the catalytic Markovnikov hydrosilylation reaction. However, the mono(NHC) dicobalt complex [(IPr)(CO)₂Co(μ-η²:η²-HCCPh)Co(CO)₃] exhibits higher catalytic activity over the di(NHC)-dicobalt complexes. The cobalt silyl complex [(IPr)Co(CO)₃(SiEt₃)] is ineffective in catalyzing the hydrosilylation reaction. Deuterium labeling experiments with PhC≡CD and DSiEt₃ indicates the syn-addition nature of the hydrosilylation reaction. The absence of deuterium scrambling in the hydrosilylation products formed from the catalytic reaction of PhC≡CH with a mixture of DSiEt₃ and HSi(OEt)₃ hints that mononuclear cobalt species are less likely the in-cycle species. These observations, in addition to the evident of nonsymmetric Co₂C₂-butterfly core in the structure of [(IPr)(CO)₂Co(μ-η²:η²-HCCPh)Co(CO)₃], point out that mono(IPr)-dicobalt species are the genuine catalysts for the cobalt-catalyzed hydrosilylation reaction and that the high α selectivity of the catalytic system originates from the joint play of the dicobalt carbonyl species to coordinate alkynes in the Co(μ-η²:η²-HCCR')Co mode and the steric demanding nature of IPr ligand.

(Z)-Selective Hydrosilylation and Hydroboration of Terminal Alkynes Enabled by Ruthenium Complexes with an N-Heterocyclic Carbene Ligand

Metal-catalyzed trans-1,2-hydrosilylations and hydroborations of terminal alkynes that generate synthetically valuable (Z)-alkenylsilanes and (Z)-alkenylboranes remain challenging due to the (E)-selective nature of the reactions and the formation of the thermodynamically unfavorable (Z)-isomer. The development of new, efficient catalytic systems for the (Z)-selective hydrosilylation and hydroboration of terminal alkynes is thus highly desirable from a fundamental perspective as it would deepen our understanding of the metal-catalyzed (Z)-selective hydrosilylation and hydroboration of terminal alkynes. This personal account describes our research for developing a ruthenium complex that can efficiently catalyze the hydrosilylation and hydroboration of terminal alkynes, and for exploring the factors controlling (Z)-selectivity of the reactions. Our effort into the activation of B-protected boronic acids, R-B(dan) (dan=naphthalene-1,8-diaminato), that was believed not to participate in Suzuki-Miyaura cross-coupling, is also discussed.