Sterically Protected and Conformation-Restricted BOBHY Dyes with Bright Near-Infrared Fluorescence: N2O-type Expanded BOPHY Dyes Derived from Boronic Acids

Steric protection of near-infrared fluorescent dyes for enhanced bioimaging

Near-fluorescent (NIR) dyes that absorb and emit light in the wavelength range of 650-1700 nm are well-suited for bioimaging due to the improved image contrast and increased penetration of the long-wavelength light through biological tissue. However, the imaging performance of NIR fluorescent dyes is limited by several inherent photophysical and physicochemical properties including, low fluorescence quantum yield, high chemical and photochemical reactivity, propensity to self-aggregate in water, non-specific association with off-target biological sites, and non-optimal pharmacokinetic profiles in living subjects. In principle, all these drawbacks can be alleviated by steric protection which is a structural process that surrounds the fluorophore with bulky groups that block undesired intermolecular interactions. The literature methods to sterically protect a long-wavelength dye can be separated into two general strategies, non-covalent dye encapsulation and covalent steric appendage. Illustrative examples of each method show how steric protection improves bioimaging performance by providing: (a) increased fluorescence brightness, (b) higher fluorophore ground state stability, (c) decreased photobleaching, and (d) superior pharmacokinetic profile. Some sterically protected dyes are commercially available and further success with future systems will require experts in chemistry, microscopy, cell biology, medical imaging, and clinical medicine to work closely as interdisciplinary teams.

Solid-State Emissive meso-Aryl/Alkyl-Substituted and Heteroatom-Mixed BOPPY Dyes: Syntheses, Structures, Physicochemical, Redox Properties, and Computational Analysis

A series of solid-state emissive meso-aryl/alkyl-substituted and heteroatom-mixed bisBF2-anchoring fluorophore incorporating pyrrolyl-pyridylhydrazone (BOPPY) dyes have been developed by a one-pot condensation of ketonized or formylated pyrroles and 2-heterocyclohydrazine as well as the subsequent borylation coordination. Interestingly, the BOPPY dyes with meso-alkyl-substituted groups or oxygen-substituted pyridine moieties exhibit high fluorescence quantum yields (QYs) of up to 79%, the highest solid QY of 74%, and long lifetimes independent of polarity in the available BOPPYs. On the other hand, the BOPPYs with meso-aryl or N-substituted moieties display a high solution QY of up to 93% and slight emission wavelength maxima. However, the S-substituted BOPPY dye exhibited weak fluorescence in all studied solvents, which was attributed to the structural flexibility of the N-C-S bond and different from those BOPPYs with O or N substitution, indicated by quantum calculations. And the significant excited-state structural rearrangement in a polar solvent is further confirmed by femtosecond time-resolved transient absorption spectroscopy. More importantly, those novel and barely fluorescent BOPPYs in acetonitrile show advantageous aggregation-induced enhanced emission and viscosity-dependent activities. These advancements in the photophysical and electrochemical properties of BOPPY dyes offer valuable insights into their further development and potential applications.

Strategic Construction of meso-Aryl-Substituted N,N-Carbonyl-Bridged Dipyrrinones as Small, Bright, and Tunable Fluorophores

A series of novel N,N-carbonyl-bridged dipyrrinone fluorophores have been directly constructed from α-halogenated dipyrrinones, which are conveniently obtained from the acid-catalyzed hydrolysis of readily available α,α'-dihalodipyrrins. This novel methodology affords efficient modulation of the functional groups at both the meso- and α-positions of this fluorophore. These resultant dyes show tunable absorption and emission wavelengths, good molar absorption coefficients, relatively large Stokes shifts, and excellent fluorescence quantum yields up to 0.99, and have been successfully applied in both one- and two-photon fluorescence microscopy imaging in living cells.

Design and synthesis of a BOAHY-derived tracker for fluorescent labeling of mitochondria

Fluorescence microscopy has proven to be a crucial powerful tool to specifically visualize cellular organelles. In-depth visualization of the structure of mitochondria in living cells is of great value to better understand their function. Herein, based on our experience in construction of fluorescent difluoroboronate anchored acylhydrazones (BOAHY) chromophores, we rationally designed a novel monoboron complex with a connected triphenylphosphonium moiety, and evaluated its spectroscopic properties, cytotoxicity and intracellular localization. Owing to the positive charge on our fluorescent dye, the molecule had an excellent mitochondria-targeting ability (Pearson's correlation is 0.86).To the best of our knowledge, this is the first example of a BOAHY dye which has been applied as an efficient tracker to target mitochondria in living cells.

Aromatic-Ring-Fused BOPPY Fluorophores: Synthesis, Spectral, Redox Properties, and Bioimaging Application

Tetracoordinated organoboron dyes exhibiting strong fluorescence in either solution or the solid state are currently receiving much attraction in view of their photovoltaic, optoelectronic, and biological applications. Herein, a series of aromatic-ring-fused BOPPY dyes have been developed by one-pot condensation of formylated isoindoles or indoles and pyridinylhydrazine followed by subsequent borylation coordination. The facile synthesis provides excellent diversity of these unsymmetrical α-benzo- and β-benzothiophene-fused BOPPY dyes with intriguing photophysical properties owing to their rigid and planar structure and extended π-conjugation while containing a reactive site. They display intense green to orange fluorescence in solution and red-to-near-infrared emission in the solid state, with high fluorescence quantum yields up to 92 and 21%, respectively, relatively large Stokes shifts, and excellent photostability. Furthermore, two representative benzo-fused BOPPY probes with morpholine or benzenesulfonamide groups were developed and used to selectively "light up" the subcellular organelles such as lysosomes and endoplasmic reticulum under ultralow concentration, respectively.

Synthesis and Spectral Properties of Aggregation-Induced Emission-Active Push-Pull Chromophores Based On Isoindole Scaffolds

A new class of tailor-made push-pull isoindole fluorophores has been synthesized through the combination of Suzuki coupling and Knoevenagel reactions. The efficient synthetic strategy rendered the isoindole scaffold as the π-bridge and the isolation spacer and provided dyes bearing various types of electron donors and electron acceptors for manipulating their energy gaps and tuning their absorptions and emissions. Most of the N-alkylated isoindole dyes showed aggregation-induced emission behaviors suitable for bioimaging and nice solid-state emission with maxima up to 851 nm.

Access to tetracoordinate boron-doped polycyclic aromatic hydrocarbons with delayed fluorescence and aggregation-induced emission under mild conditions

Boron-doped polycyclic aromatic hydrocarbons (PAHs) have attracted ongoing attention in the field of optoelectronic materials due to their unique optical and redox properties. To investigate the effect of tetracoordinate boron in PAHs bearing N-heterocycles (indole and carbazole), a facile approach to four-coordinate boron-doped PAHs was developed, which does not require elevated temperature and pre-synthesized functionalized boron reactants. Five tetracoordinate boron-doped PAHs (NBNN-1–NBNN-5) were synthesized with different functional groups. Two of them (NBNN-1 and NBNN-2) could further undergo oxidative coupling reactions to form fused off-plane tetracoordinate boron-doped PAHs NBNN-1f and NBNN-2f. The investigation of photophysical properties showed that the UV/vis absorption and fluorescence emission are significantly red-shifted compared to those of the three-coordinate boron-doped counterparts. In addition, the emission of NBNN-1–NBNN-3 consisted of prompt fluorescence and delayed fluorescence. The compounds NBNN-1f and NBNN-2f showed aggregation-induced emission.

A series of tetracoordinate boron-doped polycyclic aromatic hydrocarbons have been synthesized under mild conditions, featuring delayed fluorescence and aggregation-induced emission.

Recent advances in the synthesis of luminescent tetra-coordinated boron compounds

Tetra-coordinated boron compounds offer a plethora of luminescent materials. Different chelation around the boron center (O,O-, N,C-, N,O-, and N,N-) has been explored to tune the electronic and photophysical properties of tetra-coordinated boron compounds. A number of fascinating molecules with interesting properties such as aggregation induced emission, mechanochromism and tunable emission by changing the solvent polarity were realised. Owing to their rich and unique properties, some of the molecules have shown applications in making optoelectronic devices, probes and so on. This perspective provides an overview of the recent developments of tetra-coordinated boron compounds and their potential applications.

The Stability of Unsubstituted BOPHY in Various Media

In this communication, we report our findings on the stability of unsubstituted BOPHY in different media. Our studies showed that unsubstituted BOPHY is highly unstable in water, methanol, and DMSO. The dye was observed to be stable in aprotic and/or relatively apolar solvents (ACN, acetone, DCM, and toluene) for a routine application. The pH of the medium was shown to affect the stability of the dye dramatically. Herein, we also presented a one-pot procedure for the synthesis of the dye.

Boron-Templated Synthesis of B(III)-Submonoazaporphyrins: The Hybrids of B(III)-Subporphyrins and B(III)-Subporphyrazines

A new class of hybridized and core-contracted porphyrinoids, B(III)-submonoazaporphyrins, which may be viewed as the hybrids of B(III)-subporphyrins and B(III)-subporphyrazines, was reported. The versatile single-step synthesis was based on an efficient intramolecular nucleophilic substitution reaction on readily available α-amino-α'-bromotripyrromethenes, while boronic acids, trifluoroborate salts, or trimethoxyborate simultaneously acted as the template and provider of apical substituent. Those new hybrids, as robust and photostable compounds, were fully characterized by NMR, mass spectrometry, and X-ray crystallography. They showed intense absorption and emission in the visible region, and their electrochemical properties and computational calculation are also discussed.

Synthesis and Spectroscopic Properties of 1,2,3-Triazole BOPAHY Dyes and Their Water-Soluble Triazolium Salts

Water-soluble BOPAHY fluorophores have not yet been reported. The potential of 1,2,3-triazolium salts for the formation of water-soluble chromophores is explored. 1,2,3-Triazole-substituted pyrroles were synthesized in a metal-free pathway and alkylated to obtain water-soluble 1,2,3-triazolium BOPAHY dyes. High fluorescence quantum yields were observed for triazole-bridged BOPAHY dyes in DCM and moderate fluorescence quantum yields for 1,2,3-triazolium-bridged BOPAHY chromophores in DCM and water. The fluorescence of the freely rotatable 1,2,3-triazolium-linked BOPAHYs is partially quenched in water.