Nickel-Catalyzed Direct Cross-Coupling of Aryl Sulfonium Salt with Aryl Bromide

Unusual Regio- and Chemoselectivity in Oxidation of Pyrroles and Indoles Enabled by a Thianthrenium Salt Intermediate

A dearomative oxidation of pyrroles to Δ3-pyrrol-2-ones is described, which employs a sulfoxide as oxidant, in conjunction with a carboxylic acid anhydride and a Brønsted acid additive. 3-substituted pyrroles undergo regioselective oxidation to give the product isomer in which oxygen has been introduced at the more hindered position. Regioselectivity is rationalized by a proposed mechanism that proceeds by initial thianthrenium introduction at the less-hindered pyrrole α-position, followed by distal attack of an oxygen nucleophile and subsequent elimination of thianthrene. The same reaction conditions are also able to effect a chemoselective oxidation of indoles to indolin-3-ones and additionally of indolin-3-ones to 2-hydroxyindolin-3-ones. Here again, the regio- and chemoselectivities are rationalized through the intermediacy of a thianthrenium salt.

Palladium-Catalyzed Hiyama-Type Coupling of Thianthrenium and Phenoxathiinium Salts

Here, we demonstrate palladium-catalyzed Hiyama-type cross-coupling reactions of aryl thianthrenium or phenoxathiinium salts. By employing stable and inexpensive organosilanes, the arylation, alkenylation, and alkynylation were realized in high efficiency using commercially available Pd(tBu3P)2 as the catalyst, thus providing a reliable method for preparation of biaryls, styrenes, and aryl acetylenes with a broad functional group tolerance under mild conditions. Given the accessibility of aryl thianthrenium or phenoxathiinium salts from simple arenes in a remarkable regioselective fashion, this protocol also provides an attractive approach for the late-stage modification of complex bioactive scaffolds.

Nickel-Catalyzed Cross-Coupling of Aryl Diazonium Salts with Aryl Bromides

Herein, we present a one-pot method for the direct cross-coupling of aryl diazonium salts and aryl bromides in an economical way that avoids the use of sensitive organometallic reagents. The reaction is accomplished with the assistance of nickel catalysts, ligands, magnesium turnings, lithium chloride, and triethylamine, avoiding the use of pre-activated organometallic reagents.

Ring-Opening Sulfonylation of Cyclic Sulfonium Salts with Sodium Sulfinates under Transition-Metal- and Additive-Free Conditions

Incorporating a sulfonyl group into parent molecules has been shown to effectively improve their synthetic applications and bioactivities. In this study, we present a straightforward and practical approach for the ring-opening reaction of alkenyl-aryl sulfonium salts with sodium sulfinates to produce a range of sulfur-containing alkyl sulfones. This method offers the benefits of mild reaction conditions, easily accessible raw materials, wide substrate applicability, good functional group compatibility, and operational simplicity. Importantly, the resulting products can be readily converted into sulfoxides, sulfones, sulfoximines, and some heterocyclic compounds.

Palladium-Catalyzed Esterification of Aryl Fluorosulfates with Aryl Formates

An efficient palladium-catalyzed carbonylation of aryl fluorosulfates with aryl formates for the facile synthesis of esters was developed. The cross-coupling reactions proceeded effectively in the presence of a palladium catalyst, phosphine ligand, and triethylamine in DMF to produce the corresponding esters in moderate to good yields. Of note, functionalities or substituents, such as nitro, cyano, methoxycarbonyl, trifluoromethyl, methylsulfonyl, trifluoromethoxy, fluoro, chloro, bromo, methyl, methoxy, N,N-dimethyl, and [1,3]dioxolyl, were well-tolerated in the reactions, which could be kept for late-stage modification. The reactions employing readily available and relatively robust aryl fluorosulfates as coupling electrophiles could potentially serve as an attractive alternative to traditional cross-couplings with the use of aryl halides and pseudohalides as substrates.

Desulfurative Functionalization of β-Acyl Allylic Sulfides with N-H Free Indoles Highly Regioselective at C3 and N1 Positions: Rapid Access to α-Branched Enones

A regiodivergent allylation of 1H-indoles highly selectively at the C3 and N1 positions with β-acyl allylic sulfides through desulfurative C-C/C-N bond-forming reactions has been developed under mild conditions. Notably, the remarkable site-selective switch can be achieved by a delicate choice of solvents and bases. This cost-efficient method displays a broad substrate scope, good functional compatibility, and excellent site-selectivity, thus offering a divergent synthesis of indole substituted α-branched enones, which possess diverse potential opportunities for further applications and derivatization.

Hydroxylation of Aryl Sulfonium Salts for Phenol Synthesis under Mild Reaction Conditions

Hydroxylation of aryl sulfonium salts could be realized by utilizing acetohydroxamic acid and oxime as hydroxylative agents in the presence of cesium carbonate as a base, leading to a variety of structurally diverse hydroxylated arenes in 47-95% yields. In addition, the reaction exhibited broad functionality tolerance, and a range of important functional groups (e.g., cyano, nitro, sulfonyl, formyl, keto, and ester) could be well amenable to the mild reaction conditions.

Iron-Mediated Reductive Amidation of Triazine Esters with Nitroarenes

A reductive amidation of triazine esters with nitroarenes by using cheap iron as a reducing metal in the presence of TMSCl in DMF was developed. The reactions proceeded efficiently under transition metal-free conditions to give the corresponding amides in moderate to good yields with good functional group compatibility. Preliminary mechanistic investigations indicated that nitrosobenzene, N-phenyl hydroxylamine, azoxybenzene, azobenzene, aniline, and N-arylformamide possibly served as the intermediates of the reaction.

Nickel-Catalyzed Cross-Coupling Reaction of Aryl Methyl Sulfides with Aryl Bromides

A nickel-catalyzed cross-coupling reaction of aryl methyl sulfides with aryl bromides has been developed to access biaryls in yields of up to 86%. The reactions proceeded well using Ni(COD)2 as catalyst with the ligand BINAP (2,2'-bis(diphenylphosphanyl)-1,1'-binaphthalene) in the presence of magnesium. The method has a broad scope of substrates and is scalable. The wide availability of commercially available aryl bromides and the absence of preparation and preparation of organometallic reagents make the reaction of high application value.

Nickel-Catalyzed Direct Cross-Coupling of Unactivated Aryl Fluorides with Aryl Bromides

A nickel-catalyzed direct cross-coupling of unactivated aryl fluorides with aryl bromides is realized. The one-pot reaction, which avoids the use of preformed and sensitive organometallic reagents, proceeds effectively via C-F bond cleavage at room temperature in THF in the presence of the phosphine ligand and magnesium powder (with or without TMSCl) to produce the desired biaryls in modest to good yields.

Nickel-Catalyzed Direct Cross-Coupling of Aryl Thioether with Aryl Bromide

A straightforward cross-coupling of aryl thioether with aryl bromide with the aid of nickel salt, magnesium, and lithium chloride in tetrahydrofuran at ambient temperature was accomplished. The one-pot reactions proceeded efficiently via C-S bond cleavage to produce the desired biaryls in modest to good yields, avoiding the use of pregenerated or commercial organometallic reagents.

Zincation of Styrylsulfonium Salts

We report the formation of zinc reagents by the reaction of styrylsulfonium salts with zinc powder. Transition metals and other additives are not required for promoting zincation. Zincation tolerates a variety of sensitive functional groups, including esters, bromides, and boronic esters, and proceeds with complete retention of stereochemistry. This method presents a practical approach to the formation of zinc reagents that can be used in a variety of functionalizations, such as halogenation, carboxylation, and Negishi cross-couplings.

The Preparation of Diaryl Sulfoxinium Triflates and Their Application in Palladium-Catalyzed Cross-Coupling Reactions

Treatment of N-methyl-S,S-diaryl sulfoximines with methyl trifluoromethanesulfonate provides bench-stable sulfoxinium salts in excellent yields. Applying them in Sonogashira-, Heck- and Suzuki-type cross-coupling reactions leads to the corresponding products by sequential C-S bond cleavage and C-C bond formation. Electronic factors induced by substituents on the S-aryl groups govern the coupling efficiency.

Ni-catalyzed C-S bond construction and cleavage

Sulfur-containing compounds have attracted considerable interest due to their wide-ranging applications in pharmaceuticals, agriculture, natural products, and organic materials. The development of efficient and rapid methods for the construction and transformation of sulfur-containing compounds is of great importance. Since nickel is inexpensive and has a variety of valence states, strong nucleophilicity and low energy barriers for oxidative addition, the construction and transformation of sulfur-containing compounds by nickel-catalyzed cross-coupling have become important strategies. In addition, sulfur-containing compounds have also been playing increasingly important roles in the field of cross-coupling due to their thermodynamically stable but dynamic activity. This review will focus on nickel-catalyzed construction and transformation of various sulfide-containing compounds, such as sulfides, disulfides, and hypervalent sulfur-containing compounds.

Nickel-Catalyzed Direct Cross-Coupling of Diaryl Sulfoxide with Aryl Bromide

The direct cross-couplings of diaryl sulfoxides with aryl bromides via C-S bond cleavage could be readily accomplished using nickel(II) as the catalyst, 1,2-bis(diphenylphosphino)ethane (dppe) as the ligand, and magnesium turnings as the reducing metal in THF, leading to the corresponding biaryls in moderate to good yields. The reaction exhibited a broad substrate scope and could be applied to a gram-scale synthesis. The "one-pot" reaction, which avoids the utility of presynthesized and moisture-labile organometallic compounds, is operationally simple and step-economic.

Nickel-catalyzed Thioester Transfer Reaction with sp2-Hybridized Electrophiles

We report a thioacylation transfer reaction based on nickel-catalyzed C-C bond cleavage of thioesters with sp²-hybridized electrophiles. Aryl bromides, iodides, and alkenyl triflates can participate in thioester transfer reaction of aryl thioesters, affording a wide range of structurally diverse new thioesters in yields of up to 98% under mild reaction conditions. With this protocol, it is possible to construct alkenyl thioesters from the corresponding ketones through the generation of alkenyl triflates.

Palladium-Catalyzed Sonogashira Coupling of a Heterocyclic Phosphonium Salt with a Terminal Alkyne

An efficient Sonogashira coupling of a heterocyclic phosphonium salt with a terminal alkyne via C-P bond cleavage was developed. The reactions proceeded smoothly in the presence of palladium catalyst, copper(I) iodide, and N,N-diisopropylethylamine (DIPEA) in N-methyl-2-pyrrolidone (NMP) at 100 °C for 12 h, producing the corresponding alkynyl-substituted pyridine, quinoline, pyrazine, and quinoxaline in moderate to good yields with wide substrate scope and broad functional group tolerance. In addition, gram-scale synthesis could also be achieved, and the reaction could be applied to the functionalization of alkyne-containing complex molecules derived from sugars and pharmaceutical and naturally occurring products (e.g., estrone, d-galactopyranose, menthol, and ibuprofen).

Palladium-catalyzed phosphorylation of arylsulfonium salts with P(O)H compounds via C–S bond cleavage

Herein we report a novel palladium-catalyzed phosphorylation of arylsulfonium salts with P(O)H compounds via C–S bond cleavage under mild conditions.