Copper-Mediated Remote C–H Bond Chalcogenation of Quinolines on the C5 Position

Palladium-Catalyzed Coordination-Induced Remote C-H Aryl Etherification/Amination of 8-Amidoquinolines

Herein, we report a direct method for palladium-catalyzed coordination-induced oxidative remote C-H aryl etherification of 8-amidoquinolines with p-benzoquinone monoacetal. The method provides access to C5-aryl etherified quinolines and shows site-selectivity different from that of typical palladium-catalyzed C(sp2)-H activation reactions. The p-benzoquinone monoacetals act both as oxidants and as aryl etherification reagents. By using proper substrates, C5-aminated quinolines and C4-etherifed 1-naphthylamine could also be formed.

2-Pyridone-Directed CuII-Catalyzed General Method of C(sp2)-H Activation for C-S, C-Se, and C-N Cross-Coupling: Easy Access to Aryl Thioethers, Selenide Ethers, and Sulfonamides and DFT Study

We have demonstrated N-substituted 2-pyridones as an N,O-directing group for selective C(sp2)-H-activated thiolation, selenylation, and sulfonamidation of ortho C-H bonds of benzamides. This method utilizes a cost-effective Cu(II)-salt catalyst instead of precious metal catalysts, achieving high yields, including gram-scale synthesis and excellent functional group tolerance. We applied this protocol to access 30 different compounds with high yields, demonstrating thiolation of fluorine-substituted benzamides as well. Density functional theory (DFT) calculations support the mechanism, including acetate-supported concerted metalation deprotonation (CMD) steps and the unique role of dimethyl sulfoxide (DMSO) solvent. The facile synthesis of pharmaceutically important sulfonamides and other compounds highlights the method's potential in chemistry and medicinal chemistry.

Copper-promoted C5-selective bromination of 8-aminoquinoline amides with alkyl bromides

An efficient and practical method for the synthesis of C5-brominated 8-aminoquinoline amides via a copper-promoted selective bromination of 8-aminoquinoline amides with alkyl bromides was developed. The reaction proceeds smoothly in dimethyl sulfoxide (DMSO) under air, employing activated and unactivated alkyl bromides as the halogenation reagents without additional external oxidants. This method features outstanding site selectivity, broad substrate scope, and excellent yields.

Microwave-accelerated cross-dehydrogenative-coupling (CDC) of N-(quinolin-8-yl)amides with acetone/acetonitrile under metal-free conditions

A highly selective remote C(sp³)-H acetonation of N-(quinolin-8-yl)amide scaffolds at the C5-position under microwave irradiation has been developed. In the absence of a transition-metal-catalyst, benzoyl peroxide (BPO)-promoted cross-dehydrogenation coupling (CDC) of N-(quinolin-8-yl)amides with acetone/acetonitrile occurred smoothly to generate the corresponding 5-acetonated/acetonitriled N-(quinolin-8-yl)amides in good yields. The transformation is operationally simple, rapid, easily scaled-up to the gram scale, and shows a broad substrate scope.

Copper-catalyzed selective C5-H bromination and difluoromethylation of 8-aminoquinoline amides using ethyl bromodifluoroacetate as the bifunctional reagent

A simple and effective method for the copper-catalyzed selective C5-H bromination and difluoromethylation of 8-aminoquinoline amides with ethyl bromodifluoroacetate as the bifunctional reagent was developed. The combination of cupric catalyst and alkaline additive results in a C5-bromination reaction, whereas cuprous catalyst combined with silver additive results in the C5-difluoromethylation reaction. This method has a broad substrate scope and allows for easy and convenient access to desired C5-functionalized quinolones with good to excellent yields.

Copper-Catalyzed Regioselective Remote C-H Bond Chalcogenation of Aromatic Amine Derivatives without Using Any Large Template

A mild and convenient strategy has been developed for the para-selective chalcogenation of anilide scaffolds via C-H bond functionalization. This methodology employs one of the most earth-abundant and inexpensive Cu(II) catalysts and a commercially available simple aryl chalcogen source without any complex directing template, exogenous ligand, acid/base, oxidant, or other additives. The key feature of this methodology is an impressive regioselectivity along with a wide range of functional group tolerance with good to excellent yields under aerobic conditions.

Transamidation and Decarbonylation of N-Phthaloyl-Amino Acid Amides Enabled by Palladium-Catalyzed Selective C-N Bond Cleavage

Amides are important functional synthons that have been widely used in the construction of peptides, natural products, and drugs. The C-N bond cleavage provides the direct method for amide conversion. However, amides, especially secondary amides, tend to be chemically inert due to the resonance of the amide bond. Here, we describe an efficient Pd-catalyzed transamidation and decarbonylation of multiamide structure molecules through C-N bond cleavage with excellent chemoselectivity. The transamidation of secondary amides and the decarbonylation of phthalimide provide meaningful tools for the modification of amino acid derivatives. Moreover, further transformations of azidation and C(sp³)-H monoarylation emphasized the potential utility of this selective C-N bond cleavage method.

A review on the role of transition metals in selenylation reactions

Organoselenium chemistry has emerged as a distinctive area of research with tremendous utility in the synthesis of biologically and pharmaceutically active molecules. Significant synthetic approaches have been made for the construction of C-Se bonds which find use in other organic transformations. This review focuses on the versatility of transition metal-mediated selenylation reactions, providing insights into various synthetic pathways and mechanistic details. Further, this review aims to offer a broad perspective for designing efficient and novel catalysts to incorporate organoselenium moiety into the inert C-H bonds.

Ag-Cu copromoted direct C2-H bond thiolation of azoles with Bunte salts as sulfur sources

A direct C2-H thiolation of azoles with Bunte salts was achieved under the combined action of copper and silver salts. This protocol could furnish various substituted 2-thioazoles in moderate to good yields. This method has a broad substrate scope and shows good functional group tolerance.

One-Pot Tandem Access to Phenothiazine Derivatives from Acetanilide and 2-Bromothiophenol via Rhodium-Catalyzed C-H Thiolation and Copper-Catalyzed C-N Amination

A one-pot and step economic reaction involving Rh(III)-catalyzed C-H thiolation and relay Cu(II)-catalyzed C-N amination of acetanilide and 2-bromothiophenol is reported here, with several valuable phenothiazine products obtained. This synthesis protocol proceeds from easily starting materials, demonstrating high atom economy, broad substrate scope, and good yield. Furthermore, the directing group can be easily eliminated, and chlorpromazine is provided in a large scale; thus this synthesis protocol could be utilized to construct phenothiazine scaffolds.

Copper-catalyzed ortho-selective direct sulfenylation of N-aryl-7-azaindoles with disulfides

A copper-catalyzed direct C-H chalcogenation of N-aryl-azaindoles with disulfides is described. This transformation was performed using Earth abundant Cu(OAc)₂ as a catalyst, benzoic acid as an additive, air as a terminal oxidant, and readily available diaryl and dialkyldisulfides (or diselenide) as chalcogenation reagents. High functional group tolerance and excellent regioselectivity are demonstrated by the efficient preparation of a wide range of ortho-sulfenylation-7-azaindoles.

Nickel-Catalyzed N,N-Diarylation of 8-Aminoquinoline with Large Steric Aryl Bromides and Fluorescence of Products

A simple and efficient methodology for the synthesis of large sterically hindered triarylamines in a single step was developed. A direct N,N-diarylation of 8-aminoquinoline with sterically hindered bromides, making use of inexpensive nickel as a catalyst and simple sodium salt as a base, gives the products in good to excellent yields. Various bromides and substituted 8-aminoquinolines are tolerated. Preliminary fluorescence results indicate that these sterically hindered and conjugated triarylamines may have some potential in material chemistry.

Site-specific C–H chalcogenation of quinoxalin-2(1H)-ones enabled by Selectfluor reagent

A site-specific C6–H chalcogenation of quinoxalin-2(1H)-ones with various diselenides and dithiols is presented by employing Selectfluor reagent as an oxidant.

Iodine-Catalyzed Synthesis of N,N'-Chelate Organoboron Aminoquinolate

We disclose a novel method for the synthesis of fluorescent N,N'-chelate organoboron compounds in high efficiency by treatment of aminoquinolates with NaBAr₄/R'COOH in the presence of an iodine catalyst. These compounds display high air and thermal stability. A possible catalytic mechanism based on the results of control experiments has been proposed. Fluorescence quantum yield of 3b is up to 0.79 in dichloromethane.

Rhodium(III)-Catalyzed Oxidative Annulation of 4-Aminoquinolines and Acrylate through Two Consecutive C(sp2)-H Activations

The C-H annulation of the five-position of quinolines and acrylates to afford heterocycles is an active field of research in organic synthesis. Herein the annulation of 4-aminoquinolines with acrylates through two consecutive C-H activations catalyzed by Rh(III) is described. The reaction proceeds with high atom efficiency under mild reaction conditions, and this protocol will provide appealing strategies for the synthesis of fused quinoline heterocycles.

Unravelling the mechanism of cobalt-catalysed remote C-H nitration of 8-aminoquinolinamides and expansion of substrate scope towards 1-naphthylpicolinamide

Previously, an unexpected Co-catalysed remote C-H nitration of 8-aminoquinolinamide compounds was developed. This report provided a novel reactivity for Co which was assumed to proceed through the mechanistic pathway already known for analogous Cu-catalysed remote couplings of the same substrates. In order to shed light into this intriguing, and previously unobserved reactivity for Co, a thorough computational study has now been performed, which has allowed for a full understanding of the operative mechanism. This study demonstrates that the Co-catalysed remote coupling does not occur through the previously proposed Single Electron Transfer (SET) mechanism, but actually operates through a high-spin induced remote radical coupling mechanism, through a key intermediate with significant proportion of spin density at the 5- and 7-positions of the aminoquinoline ring. Additionally, new experimental data provides expansion of the synthetic utility of the original nitration procedure towards 1-naphthylpicolinamide which unexpectedly appears to operate via a subtly different mechanism despite having a similar chelate environment.

An atom-economical and regioselective metal-free C-5 chalcogenation of 8-aminoquinolines under mild conditions

A general and simple metal-free protocol for expedient C-H functionalization leading to the regioselective generation of C-5 chalcogenated 8-aminoquinoline analogues in up to 90% yield at room temperature (25 °C) has been established. This methodology is an eco-friendly approach to the atom-economical utilization of diaryl/dialkyl chalcogenides for direct access to chalcogenated quinolines and is scalable to the gram scale without considerable decrease in the yield of the product. It represents a practical alternative to the existing metal-catalyzed functionalization of 8-aminoquinoline derivatives with broad functional group tolerance. The controlled experiments suggest that the reaction possibly proceeds through an ionic pathway at room temperature. Furthermore, the potentiality for the functionalization of free amines in chalcogenated-8-aminoquinolines provides an attractive perspective for further elaboration of the amine substituent through chemical manipulations. The applicability of the standardized method has been augmented through late-stage antimalarial drug diversification of primaquine analogues.

Palladium-Catalyzed Direct Ortho-C-H Selenylation of Benzaldehydes Using Benzidine as a Transient Directing Group

Benzidine was found to be a novel transient directing group to enable Pd-catalyzed direct selenylation of inert C(sp²)-H bonds of benzaldehydes. Diverse diarylselenides were readily constructed in high efficiency and satisfactory yields with good functional group tolerance. The practical usage of the method was further demonstrated by enlarged reaction to gram scale and application in the facile access to two selenoxanthenes and one fluorescent probe.

Visible Light-Promoted Photocatalytic C-5 Carboxylation of 8-Aminoquinoline Amides and Sulfonamides via a Single Electron Transfer Pathway

An efficient photocatalytic method was developed for the remote C5-H bond carboxylation of 8-aminoquinoline amide and sulfonamide derivatives. This methodology uses in situ generated ^•CBr₃ radical as a carboxylation agent with alcohol and is further extended to a variety of arenes and heteroarenes to synthesize the desired carboxylated product in moderate-to-good yields. The reaction proceeding through a single electron transfer pathway was established by a control experiment, and a butylated hydroxytoluene-trapped aryl radical cation intermediate in high-resolution mass spectrometry was identified.

Transition metal catalysed direct selanylation of arenes and heteroarenes

Transition metal catalysed C-H functionalization has reached an exciting level of sophistication, and, today, it represents a paradigm shift from the standard logic of synthetic chemistry. The direct conversion of C-H bonds into C-heteroatoms remains, however, a critical challenge. Nowadays, there is a great demand in general synthetic chemistry in, for example, the materials science for the development of straightforward C-Se bond formation, in order to fulfil the practical requirements. In this sense, this review summarizes recent outstanding advances in the C-Se bond formation through transition metal-catalysed direct selanylation, providing new insights into their mechanistic aspects and disclosing effective synthetic routes with high atom economy. In addition, this review intends to show the growing opportunities to construct complex chemical scaffolds containing selenium atoms.

Carbon-Carbon Bond Formation of Trifluoroacetyl Amides with Grignard Reagents via C(O)-CF3 Bond Cleavage

The reaction of trifluoroacetyl amides with Grignard reagent for the substitution of CF₃ group with various alkyl or aryl groups is described. A variety of aryl, quinolin-8-yl, and (hetero)alkyl functional groups as well as F, Cl, and Br atoms are well tolerated. These moisture-stable and easily available trifluoroacetyl amides can be conveniently obtained and used as new versatile precursors for isocyanates. The control experiments show that the reaction proceeds via an isocyanate intermediate and/or alkoxide/amide dual anionic intermediate.

Selenium and Tellurium Electrophiles in Organic Synthesis

This chapter highlights the utility of electrophilic achiral and chiral organoselenium reagents in organic synthesis. A range of reactions from alkene functionalizations, the functionalization of aliphatic and aromatic C–H bonds using stoichiometric and catalytic approaches as well as rearrangement reactions are described. In addition, the utility of organotellurium reagents in organic synthesis is covered in this chapter.

Copper-mediated direct thiolation of aryl C–H bonds with disulfides

A directing group-assisted copper-mediated thiolation of aromatic amides with disulfides via direct C(sp²)–H activation has been developed.

Ruthenium-catalyzed remote C5-sulfonation of N-alkyl-8-aminoquinolines

Ruthenium-catalyzed remote C–H sulfonation of 8-aminoquinolines with single C5-selectivity.

3d Transition Metals for C-H Activation

C-H activation has surfaced as an increasingly powerful tool for molecular sciences, with notable applications to material sciences, crop protection, drug discovery, and pharmaceutical industries, among others. Despite major advances, the vast majority of these C-H functionalizations required precious 4d or 5d transition metal catalysts. Given the cost-effective and sustainable nature of earth-abundant first row transition metals, the development of less toxic, inexpensive 3d metal catalysts for C-H activation has gained considerable recent momentum as a significantly more environmentally-benign and economically-attractive alternative. Herein, we provide a comprehensive overview on first row transition metal catalysts for C-H activation until summer 2018.