tert-Butyl Sulfoxide as a Starting Point for the Synthesis of Sulfinyl Containing Compounds

Thionyl fluoride as a sulfur(IV) SuFEx hub for the efficient syntheses of sulfinamides and sulfinate esters

Herein, we demonstrate a method for the syntheses of sulfinamides and sulfinate esters using a novel sulfur(IV) fluoride exchange reaction with organometallic reagents. Our strategy involves the addition of an amine or alcohol nucleophile to thionyl fluoride, acting as a S(IV) SuFEx hub, followed by an organometallic reagent. This approach allows efficient access to sulfinamides (45-91% yields) and sulfinate esters (44-82% yields) in only 30 minutes. The sulfinamide and sulfinate esters also can be readily derivatized to the corresponding S(VI) sulfonamides, sulfonate esters, sulfonimidamides, and sulfonimidates without isolation of the intermediates.

Expanding the Use of Benzothioxanthene Imides to Photochemistry: Eco-Friendly Aerobic Oxidation of Sulfides to Sulfoxides

The sulfoxide moiety is one of the most commonly utilized groups in pharmaceutical and industrial chemistry. The need for sustainability and easy accessibility to sulfoxide moieties is deemed necessary, due to its ubiquity in natural products and potentially pharmaceutically active compounds. In this context, we report herein a sustainable, aerobic and environmentally friendly photochemical protocol based on the use of a benzothioxathene imide as the photocatalyst to selectively oxidize sulfides under mild irradiation (456 nm), in very low catalyst loading (0.01 mol %) and on water. In addition, to demonstrate the compatibility of our protocol with wide scope of substrates, the latter was successfully applied to the synthesis of the biologically-active Sulforaphane and Modafinil.

Electrochemical synthesis of sulfinic and sulfonic esters from sulfonyl hydrazides

An electrochemical synthetic method for the synthesis of sulfinic esters and sulfonic esters from sulfonyl hydrazides was developed. Alkyl sulfinic esters were synthesized by treating sulfonyl hydrazides with trialkyl orthoformate in a DMF solvent at a constant current of 5 mA and then optimizing the reaction conditions. Conversely, alkyl sulfonic esters were exclusively obtained when the reaction was conducted in alkyl alcohol solvents at a constant current of 15 mA. The various substituted arylsulfonyl hydrazides afforded moderate to good yields of the desired sulfinic esters and sulfonic esters. Mechanistic investigations revealed that sulfonyl radicals were formed through electrochemical oxidation and that they react with alkyl radicals or alkoxy radicals to generate the respective ester products.

A Method for the Synthesis of Thioindoles through Copper-Catalyzed C-S Bond Coupling Reaction

We herein report the copper-catalyzed C-S bond coupling reaction of indoles with N-thiosuccinimides, resulting in moderate to excellent yields of mono- and bis-sulfenylated compounds such as arylthioindoles, alkylthioindoles, selenylated indoles, and cysteine-substituted indoles. Thioarylation and thioglycosylation at the C2 position of indole alkaloids in the Radix Isatidis were achieved via structural modification. The first total syntheses of isatindigotindolosides III and IV have been successfully carried out. The electrophilic sulfenyl bromides generated in situ can play an important role in the catalytic cycle.

Transsulfinamidation of Sulfinamides with Amines

Metal- and additive-free transsulfinamidation of N-unsubstituted sulfinamides and N-pivaloyl-protected sulfinamides with various amines is reported. With this method, both N-monosubstituted and N,N-disubstituted sulfinamides were obtained in good yields simply by heating. Preliminary experiments also indicate that alcohols can be used as nucleophiles instead of amines and can provide sulfinate esters.

Facile synthesis of sulfinate esters from aryl iodides via direct oxidation of thioesters

A practical method to synthesize sulfinate esters from aryl iodides is disclosed. Direct oxidation of thioesters prepared by copper-catalyzed C-S formation of aryl iodides realized the efficient synthesis of sulfinate esters. Due to the good accessibility of aryl iodides, a wide variety of sulfinate esters were prepared from easily available starting materials such as carboxylic acids and anilines.

Copper-Catalyzed C2- or C3-Thioglycosylation of Indoles with N-(Thioglycosides)succinimides: An Effective Strategy for the Total Synthesis of Isatindigotindolosides

Isatindigotindolosides, indoles containing a 1-S-β-glucopyranosyl unit at position C2, show promising bioactivity. Here, we report a copper-catalyzed C2- or C3-thioglycosylation of indoles with N-(thioglycosides)succinimides to construct indole alkaloid glucosides. This reaction is widely tolerant of functional groups, as various indoles and thioglycosides are suitable. It also provides a reliable method for performing late-stage modifications of natural products, such as gramine and melatonin. Total syntheses of isatindigotindolosides I and II were successfully accomplished using the C2-thioglycosylation reaction as a key step.

A Sulfoxide Reagent for One-Pot, Three-Component Syntheses of Sulfoxides and Sulfinamides

Sulfoxides and sulfinamides represent versatile sulfur functional groups found in ligands, chiral auxiliaries, and bioactive molecules. Canonical two-component syntheses, however, rely on substrates with a preinstalled C-S bond and impede efficient and modular access to these sulfur motifs. Herein is presented the application of an easily prepared, bench-stable sulfoxide reagent for one-pot, three-component syntheses of sulfoxides and sulfinamides. The sulfoxide reagent donates the SO unit upon the reaction with a Grignard reagent (RMgX) as a sulfenate anion (RSO^- ). While subsequent trapping reactions of this key intermediate with carbon electrophiles provide sulfoxides, a range of tertiary, secondary, and primary sulfinamides can be prepared by substitution reactions with electrophilic amines. The syntheses of sulfinamide analogs of amide- and sulfonamide-containing drugs illustrate the utility of the method for the rapid preparation of medicinally relevant molecules.

Heteroarylation of Sulfenate Ions In Situ Generated from β-Sulfinyl Esters under Transition-Metal-Free Conditions

Heteroaryl sulfoxides are an integral part of several bioactive molecules and pharmaceuticals. We have described a transition-metal-free route for the direct sulfinylation of 2-halobenzothiazoles and 2-halobenzimidazoles using β-sulfinyl esters as the source of the sulfenate ion in the presence of a Brønsted base such as LiO^tBu, and the corresponding heteroaryl sulfoxides were isolated in yields of 30 to 94%. Moreover, we hypothesized a plausible concerted nucleophilic aromatic substitution (cS_NAr) pathway for the direct incorporation of sulfinyl functionality into the 2-haloheteroarenes.

Direct Synthesis of Sulfinylated Benzofulvenes via BF3·Et2O-Promoted Cascade Reactions of Arylsulfinic Acids with 1,3-Enynes

A novel and efficient method for the selective synthesis of sulfinylated benzofulvenes has been developed through the BF₃·Et₂O-promoted electrophilic addition/cyclization of 1,3-enynes. This metal-free cascade reaction employs readily accessible arylsulfinic acids as sulfinyl cation sources at room temperature and provides a wide range of functionalized benzofulvenes in good to excellent yields under mild conditions.

Sulfoxide and Sulfone Synthesis via Electrochemical Oxidation of Sulfides

The oxidation of diaryl sulfides and aryl alkyl sulfides to the corresponding sulfoxides and sulfones under electrochemical conditions is reported. Sulfoxides are selectively obtained in good yield under a constant current of 5 mA for 10 h in DMF, while sulfones are formed as the major product under a constant current of 10 or 20 mA for 10 h in MeOH. The oxygen of both the sulfoxide and sulfone function is derived from water.

N-p-Toluenesulfinylimidazole: A New in situ Reagent for the Mild and Efficient Synthesis of p-Toluenesulfinate Alkyl Esters and Aryl Esters

A new synthetic methodology has been developed for the synthesis of sulfinate alkyl and aryl esters. The methodology involves the combination of p-toluenesulfinic acid and 1,1′-carbonyldiimidazole (CDI) to create the putative reagent sulfinylimidazole. The process spontaneously releases carbon dioxide upon the addition of the CDI to the acid suggesting the rapid formation of the proposed reagent. Reaction of this reagent with a series of alcohols (primary, secondary, and tertiary) afforded the corresponding sulfinate alkyl esters in good to excellent yields by the addition of alcohols. It was also possible to form the related sulfinate aryl esters by treating the proposed sulfinylimidazole with selected phenols (phenol, p-tert-butylphenol, and thymol). The aryl esters were formed in excellent conversion based on analysis of the 500 MHz 1H NMR spectra of the crude reaction mixtures.

Palladium-Catalyzed Sulfinylation of Aryl- and Alkenylborons with Sulfinate Esters

An efficient, direct sulfinylation of organoborons catalyzed by palladium is disclosed. Treatment of organoborons and sulfinate esters in the presence of a palladium precatalyst provided a broad range of sulfoxides. Various organosulfur compounds having oxidizable functional groups were successfully prepared through the sulfoxide synthesis.

Mannich-Type Reaction of α-Sulfanyl N-tert-Butanesulfinylimidates: Diastereoselective Access to α-Mercapto-β-amino Acid Derivatives

A series of α-mercapto-β-amino acid derivatives were synthesized diastereoselectively in good yields through the aza-enolization of α-sulfanyl N-tert-butanesulfinylimidates, followed by their nucleophilic addition to N-tosyl imines via a Mannich-type reaction. The resulting derivatives bearing a β-sulfonylamino sulfide moiety participated in further inter- and intramolecular transformations involving episulfonium ion intermediates generated through neighboring-group participation.

Hydroxylamine-Derived Reagent as a Dual Oxidant and Amino Group Donor for the Iron-Catalyzed Preparation of Unprotected Sulfinamides from Thiols

An iron catalyzed reaction for the selective transformation of thiols (-SH) to sulfinamides (-SONH2 ) by a direct transfer of -O and free -NH2 groups has been developed. The reaction operates under mild conditions using a bench stable hydroxylamine derived reagent, exhibits broad functional group tolerance, is scalable and proceeds without the use of any precious metal catalyst or additional oxidant. This novel, practical reaction leads to the formation of two distinct new bonds (S=O and S-N) in a single step to chemoselectively form valuable, unprotected sulfinamide products. Preliminary mechanistic studies implicate the role of the alcoholic solvent as an oxygen atom donor.

Sulfenylation of Arenes with Ethyl Arylsulfinates in Water

A tetrabutylammonium iodide-mediated direct sulfenylation of arenes with ethyl arylsulfinates in water was developed. Various electron-rich arenes and ethyl arylsulfinates were investigated in the reaction, and a series of aryl sulfides were obtained in excellent yields. The advantages of this green protocol were simple reaction conditions (metal-free, water as the solvent, and under air), odorless and easily available sulfur reagent, broad substrate scope, and gram-scale synthesis. Moreover, the potential application of aryl sulfides was exemplified by further transformations.

Diastereoisomerically Pure, (S)-O-1,2-O-isopropyli dene-(5-O-α-d-glucofuranosyl) t-butanesulfinate: Synthesis, Crystal Structure, Absolute Configuration and Reactivity

The reaction of t-butylmagnesium chlorides with diastereomerically pure (R)-1,2-O-isopropylidene-3,5-O-sulfinyl-α-d-glucofuranose (R)-4 was found to be stopped at the stage of the corresponding, diastereoisomerically pure 1,2-O-isopropylidene-(5-O-α-d-glucofuranosyl) t-butanesulfinate (S)-10 for which the crystal structure and the (S)-absolute configuration was determined by X-ray crystallography. Comparison of the absolute configurations of the starting sulfite (R)-4, and t-butanesulfinate (S)-10 (which crystallizes in the orthorhombic system, space group P212121, with the single compound molecule present in the asymmetric unit), clearly indicates that the reaction of nucleophilic substitution at the stereogenic sulfur atom in the sulfite (R)-4 occurs with the full inversion of configuration via the trigonal bipyramidal sulfurane intermediate 4c in which both the entering and leaving groups are located in apical positions.

K2CO3-Catalyzed Rapid Conversion of N-Sulfonylhydrazones to Sulfinates

N-Sulfonylhydrazones derived from alkyl, aryl, and heteroaryl aldehydes and ketones undergo rapid conversion into the corresponding sulfinates when heated with 10 mol % K₂CO₃ in N,N'-dimethylethylene urea (DMEU) at elevated temperature. The reaction conditions are amenable to several functional groups and suitable for gram-scale synthesis. Under these base-catalyzed conditions, N-tosylhydrazones derived from O-allylated and O-propargylated 2-hydroxyarylaldehydes do not undergo the well-established intramolecular [3 + 2]-cycloaddition reactions and generate corresponding sulfinates in good yields. The base-catalyzed transformation proceeds via crucial rapid intermolecular protonation of the diazo intermediate 11 to generate diazonium ion 12, which upon nucleophilic displacement by the sulfonyl ion 10 provides the desired sulfinate selectively.

Electrochemical Oxidative Esterification of Thiophenols: Efficient Access to Sulfinic Esters

BACKGROUND

The sulfinic esters are important and useful building blocks in organic synthesis.

OBJECTIVE

The aim of this study was to develop a simple and efficient method for the synthesis of sulfinic esters.

MATERIALS AND METHODS

Constant current electrolysis from thiols and alcohols was selected as the method for the synthesis of sulfinic esters.

RESULTS AND DISCUSSION

A novel electrochemical method for the synthesis of sulfinic esters from thiophenols and alcohols has been developed. Up to 27 examples of sulfinic esters have been synthesized using the current methods. This protocol shows good functional group tolerance as well as high efficiency. In addition, this protocol can be easily scaled up with good efficiency. Notably, heterocycle-containing substrates, including pyridine, thiophene, and benzothiazole, gave the desired products in good yields. A plausible reaction mechanism is proposed.

CONCLUSION

This research not only provides a green and efficient method for the synthesis of sulfinic esters but also shows new applications of electrochemistry in organic synthesis. It is considered that this green and efficient synthetic protocol used to prepare sulfinic esters will have good applications in the future.

Modern Stereoselective Synthesis of Chiral Sulfinyl Compounds

Chiral sulfinyl compounds, sulfoxides, sulfoximines, sulfinamides, and other derivatives, play an important role in asymmetric synthesis as versatile auxiliaries, ligands, and catalysts. They are also recognized as pharmacophores found in already marketed and well-sold drugs (e.g., esomeprazole) and used in drug design. This review is devoted to the modern methods of preparation of sulfinyl derivatives in enantiopure or enantiomerically enriched form. Selected new approaches leading to racemic products for which the asymmetric variant can be developed in the future are mentioned as well.

Sulfoxide synthesis from sulfinate esters under Pummerer-like conditions

A facile synthetic method for the preparation of allyl sulfoxides by S-allylation of sulfinate esters proceeds through sulfonium intermediates without [3,3]-sigmatropic rearrangement and further Pummerer-type reactions of the resulting allyl sulfoxides. On the basis of the plausible reaction mechanism involving sulfonium salt intermediates, S-alkynylation and S-arylation were also accomplished.

Sulfinamide Synthesis Using Organometallic Reagents, DABSO, and Amines

We report the synthesis of sulfinamides using organometallic reagents, a sulfur dioxide reagent, and nitrogen based-nucleophiles. The addition of an organometallic reagent to the commercially available sulfur dioxide surrogate, DABSO, generates a metal sulfinate which is reacted with thionyl chloride to form a sulfinyl chloride intermediate. Trapping the sulfinyl chlorides in situ with a variety of nitrogen nucleophiles delivers sulfinamides in 32–83% yields. Each stage of the process is performed at room temperature, and the total reaction time is only 1.5 h.

Methanesulfinylation of Benzyl Halides with Dimethyl Sulfoxide

A phenyltrimethylammonium tribromide-mediated nucleophilic substitution/oxygen transformation reaction of benzyl halides with DMSO has been developed. In this transition-metal-free reaction, DMSO acts as not only a solvent but also a "S(O)Me" source, thus providing a convenient method for the efficient and direct synthesis of various benzyl methyl sulfoxides.

Regioselective and oxidant-free sulfinylation of indoles and pyrroles with sulfinamides

An unexpected time-controlled highly selective C3- or C2-sulfinylation of pyrroles with sulfinamides is reported for the first time. The sulfinylation of indoles with sulfinamides using this protocol is oxidant-free and can be performed under obviously more feasible conditions (1.2 equiv. of indoles, 10 min) in comparison with the precedent procedure (3-20 equiv. of indoles, 16-18 h, ammonium persulfate as oxidant, hv). A variety of functional groups were tolerated, and various C2-thioindoles and C2/3-thiopyrroles were obtained in moderate to excellent yields.

Iodine-Catalyzed Odorless Synthesis of S-Thiocarbamates with Sulfonyl Chlorides as a Sulfur Source

A general and efficient protocol for the direct preparation of various S-thiocarbamates with readily available and inexpensive sulfonyl chlorides as an odorless sulfur source was developed. The employment of easily available reactants, excellent functional group tolerability, and mild reaction conditions make this process very practical.

Regioselective synthesis of 2,3′-biindoles mediated by an NBS-induced homo-coupling of indoles

An efficient method for the synthesis of 2,3′-biindole and [3,2-a]carbazole derivatives via an NBS-induced homo-coupling of indoles with high regioselectivity.

Synthesis of 1,2-disubstituted benzimidazoles using an aza-Wittig-equivalent process

Based on an aza-Wittig-equivalent process, a novel synthetic approach for 1,2-disubstituted benzimidazoles has been successfully designed, which provides mild reaction conditions and excellent yields.

Visible light catalyzed methylsulfoxidation of (het)aryl diazonium salts using DMSO

The visible light catalyzed methylsulfoxidation of (het)aryl diazonium salts using DMSO is illustrated.

A radical coupling reaction of DMSO with sodium arylsulfinates in air : mild utilization of DMSO as C1 resource for the synthesis of arylsulfonyl dibromomethane

A radical coupling reaction of DMSO with ArSO₂Na without the needs of anaerobic atmosphere to afford ArSO₂CHBr₂ is described.