Aqueous Compatible Protocol to Both Alkyl and Aryl Thioamide Synthesis

Synthesis of fluorinated spiro-1,3-oxazines and thiazines via Selectfluor-mediated intramolecular cyclization

A fluorination-induced intramolecular cyclization for the synthesis of fluoro-substituted spiro-1,3-oxazine and spiro-1,3-thiazine derivatives is described. N-(2-(Cyclohex-1-en-1-yl)ethyl)benzamide and benzothioamide are used as the substrates, and the cationic fluorinating agent Selectfluor works as the fluoride source. The reaction yields a single diastereomer. The scope of this regioselective fluorination reaction is established by preparing thirty different spirooxazine and spirothiazine derivatives.

Chemoselective Thioacylation of Amines Enabled by Synergistic Defluorinative Coupling

A mild and chemoselective method for the thioacylation of amines, including amino acids and peptides, using gem-difluoroalkenes and sulfide, is reported. The distinguishing of the different nucleophilic sites (S-site and diverse N-sites) by the chemoselective C-F bond functionalization of gem-difluoroalkenes enables the unique synergistic defluorinative coupling reaction. This reaction features mild conditions, is operationally simple, efficient, and gram-scalable, tolerates various functional groups, and is activator-free and without racemization. Thioamide moieties were incorporated site-specifically into bioactive compounds. The proposed mechanism is illustrated by a DFT calculation.

Visible-Light-Driven Multicomponent Reactions for the Versatile Synthesis of Thioamides by Radical Thiocarbamoylation

Thioamides are widely used structures in pharmaceuticals and agrochemicals, as well as important synthons for the construction of sulfur-containing heterocycles. This report presents a series of visible-light-driven multicomponent reactions of amines, carbon disulfide, and olefins for the mild and versatile synthesis of linear thioamides and cyclic thiolactams. The use of inexpensive and readily available carbon disulfide as the thiocarbonyl source in a radical pathway enables the facile assembly of structurally diverse amine moieties with non-nucleophilic carbon-based reaction partners. Radical thiocarbamoylative cyclization provides a practical protocol that complements traditional approaches to thiolactams relying on deoxythionation. Mechanistic studies reveal that direct photoexcitation of in situ formed dithiocarbamate anions as well as versatile photoinduced electron transfer with diverse electron acceptors are key to the reactions.

Towards More Practical Methods for the Chemical Synthesis of Thioamides Using Sulfuration Agents: A Decade Update

Compounds possessing a thioamide function play a crucial role in organic synthesis, serving as key building blocks. They are also important in the pharmaceutical chemistry and drug design, owing to their ability to mimic the amide function in biomolecules while retaining or developing biological activity. From the synthetic viewpoint, several methods have been developed for preparing thioamides using sulfuration agents. The purpose of this review is to give an update of the last decade of contributions focusing on the formation of thioamides employing different sulfur sources. When appropriate, the cleanness and practicality of the new methods are highlighted.

An efficient metal-free and catalyst-free C-S/C-O bond-formation strategy: synthesis of pyrazole-conjugated thioamides and amides

An operationally simple and metal-free approach is described for the synthesis of pyrazole-tethered thioamide and amide conjugates. The thioamides were generated by employing a three-component reaction of diverse pyrazole C-3/4/5 carbaldehydes, secondary amines, and elemental sulfur in a single synthetic operation. The advantages of this developed protocol refer to the broad substrate scope, metal-free and easy to perform reaction conditions. Moreover, the pyrazole C-3/5-linked amide conjugates were also synthesized via an oxidative amination of pyrazole carbaldehydes and 2-aminopyridines using hydrogen peroxide as an oxidant.

Ynamide-Mediated Thioamide and Primary Thioamide Syntheses

Environmentally friendly ynamide-mediated thioamidation of monothiocarboxylic acids with amines or ammonium hydroxide for the syntheses of thioamides and primary thioamides is described. Simple and mild reaction conditions enable the reaction to tolerate a wide variety of functional groups such as hydroxyl group, ester, tertiary amine, ketone, and amide moieties. Readily available NaSH served as the sulfur source, avoiding the use of toxic, expensive, and malodorous organic sulfur reagents and making this strategy environmentally friendly and practical. Importantly, the stereochemical integrity of α-chiral monothiocarboxylic acids was maintained during the activation step and subsequent aminolysis process, thus offering a racemization-free strategy for peptide C-terminal modification. Furthermore, a number of thioamide-modified drugs were prepared in good yields by using this protocol and the synthesized primary thioamides were transformed into backbone thiazolyl modified peptides.

Water Mediated Direct Thioamidation of Aldehydes at Room Temperature

A mild, greener approach toward thioamide synthesis has been developed. Its unique features include water-mediated reaction with no input energy, additives, or catalysts as well. The presented protocol is attractive with readily available starting materials and the use of different array amines, along with a scaled-up method. Biologically active molecules such as thionicotinamide and thioisonicotinamide can be synthesized from this procedure.

Sulfur–DMSO promoted oxidative coupling of active methylhetarenes with amines: access to amides

The sulfur–DMSO couple was found to promote the coupling of active methylhetarenes with amines to yield amides under heating conditions. When 2-methylquinoline was used as the methylhetarene component, the reaction could be catalyzed by Fe, Co and Ni salts.

Thioamide synthesis via copper-catalyzed C–H activation of 1,2,3-thiadiazoles enabled by slow release and capture of thioketenes

A copper-catalyzed coupling of 1,2,3-thiadiazoles with various amines under base-free conditions was developed as a robust protocol for the synthesis of thioamide derivatives via C–H activation/Cu coordination strategy.

Ynamide-Mediated Synthetic Approach to Thioamide-Substituted Peptides

A novel synthetic approach to thioamide-substituted peptides is reported. It provides a practical tool for the chemical biology study of peptides and proteins by replacing a carbonyl oxygen atom of an amide bond by an sp²-hybridized sulfur atom to precisely introduce a thioamide bond Ψ[CS-NH] into a peptide backbone. The α-thioacyloxyenamide intermediates, originating from ynamide coupling reagent and proteinogenic amino monothioacids, are proved to be novel effective thioacylating reagents in both the solution and solid phase peptide syntheses. Herein, we describe the detailed synthesis protocol for site-specifically incorporating a thioamide bond at 19 of 20 proteinogenic amino acid residues (except for His) of a peptide backbone in a racemization/epimerization-free manner.

Cellulose-reinforced poly(ethylene-co-vinyl acetate)-supported Ag nanoparticles with excellent catalytic properties: synthesis of thioamides using the Willgerodt–Kindler reaction

Cellulose, a bio-derived polymer, is widely used in food packaging, dye removal, coatings, and solid-supported catalysis. Heterogeneous catalysts play a critical role in environmental remediation. In this context, the demand for green and cost-effective catalysts has rapidly increased. In this study, cellulose was extracted from rice straw, and a highly active solid-supported catalytic model was developed. First, cellulose was conjugated with poly(ethylene-co-vinyl acetate) (PEVA), and then Ag nanoparticles (AgNPs) were inserted into the cellulose–PEVA composite. The process involved the reduction of AgNPs in the presence of sodium borohydride. The fabricated hybrid catalyst was characterized using Fourier-transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray, and powder X-ray diffraction. Thereafter, the obtained hybrid was used as a catalyst for the Willgerodt–Kindler reaction of aromatic aldehydes, amines, and S₈ to synthesize thioamides with excellent yields. The developed catalytic system exhibited high stability and recyclability. Moreover, the mechanical properties of the hybrid catalyst were evaluated using tensile strength and impact tests. RGB analysis of digital images was also performed to investigate the primary components of the catalyst.

The AgNPs@cellulose–PEVA hybrid catalyst presented excellent catalytic efficacy for the Willgerodt–Kindler reaction, facilitating the selective formation of C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> S bonds.

A Journey from June 2018 to October 2021 with N,N-Dimethylformamide and N,N-Dimethylacetamide as Reactants

A rich array of reactions occur using N,N-dimethylformamide (DMF) or N,N-dimethylacetamide (DMAc) as reactants, these two amides being able to deliver their own H, C, N, and O atoms for the synthesis of a variety of compounds. This account highlights the literature published since June 2018, completing previous reviews by the author.

A chromatography-free and aqueous waste-free process for thioamide preparation with Lawesson's reagent

After completing the thio-substitution with Lawesson’s reagent, ethanol was found to be effective in the decomposition of the inherent stoichiometric six-membered-ring byproduct from the Lawesson’s reagent to a highly polarized diethyl thiophosphonate. The treatment significantly simplified the following chromatography purification of the desired thioamide in a small scale preparation. As scaling up the preparation of two pincer-type thioamides, we have successfully developed a convenient process with ethylene glycol to replace ethanol during the workup, including a traditional phase separation, extraction, and recrystallization. The newly developed chromatography-free procedure did not generate P-containing aqueous waste, and only organic effluents were discharged. It is believed that the optimized procedure offers the great opportunity of applying the Lawesson’s reagent for various thio-substitution reactions on a large scale.

Silver-promoted oxidative sulfonylation and ring-expansion of vinylcyclopropanes with sodium sulfinates leading to dihydronaphthalene derivatives

Silver-promoted sulfonylation and ring-expansion of vinylcyclopropanes with sodium sulfinates is established for the construction of 1-sulfonylmethylated 3,4-dihydronaphthalenes. This sulfonylation process involves a radical pathway, including sulfonyl radical formation, radical addition, ring-opening and cyclization. The 1-sulfonylmethylated 3,4-dihydronaphthalenes can be converted into other useful products.

Regio- and stereoselective thiocyanatothiolation of alkynes and alkenes by using NH4SCN and N-thiosuccinimides

A highly regioselective thiocyanatothiolation of alkynes and alkenes assisted by hydrogen bonding under simple and mild conditions is developed. Our thiocyanatothiolation reagents are readily available ammonium thiocyanate and N-thiosuccinimides. This metal-free system offers good chemical yields for a wide range of alkyne and alkene substrates with good functional group tolerance.

A highly regioselective thiocyanatothiolation of alkynes assisted by hydrogen bonding under simple and mild conditions is developed.

The recent advances in K2S2O8-mediated cyclization/coupling reactions via an oxidative transformation

Recently the K₂S₂O₈ mediated cyclization/coupling reactions to construct carbon–carbon/carbon–heteroatom bond via oxidative transformation is became much interesting in organic synthesis.

Palladium-catalyzed Suzuki-Miyaura coupling of thioureas or thioamides

Cross-coupling reactions involving metal carbene intermediates play an increasingly important role in C-C bond formation. Expanding the carbene precursors to a broader range of starting materials and more diverse products is an ongoing challenge in synthetic organic chemistry. Herein, we report a Suzuki-Miyaura coupling reaction of in situ-generated Pd-carbene complexes via desulfurization of thioureas or thioamides. This strategy enables the preparation of a broad array of substituted amidinium salts and unsymmetrical diaryl ketones. The reaction is readily scalable, compatible with bromo groups on aromatic rings, tolerant to moisture and air and has a broad substrate scope. Furthermore, a single crystal structure of Pd-diaminocarbene complex is obtained and proven to be the key intermediate in both catalytic and stoichiometric reactions. Preliminary mechanistic studies demonstrate the dual role of the silver salt as a desulfurating reagent assisting the elimination of sulfur and as oxidant facilitating the Pd^II/Pd⁰/Pd^II catalytic cycle.

Thiocarbonyl Surrogate via Combination of Potassium Sulfide and Chloroform for Dithiocarbamate Construction

An efficient and practical thiocarbonyl surrogate via combination of potassium sulfide and chloroform was established. A variety of dithiocarbamates were afforded along with four new chemical bond formations in a one-pot reaction in which the thiocarbonyl motif was generated in situ. Furthermore, these readily accessed molecules showed promising activity against HDAC8, opening a potential gateway to discover a new type of nonhydroxamate and isoenzyme-selective HDAC inhibitors.

Microwave-assisted iodine-catalyzed oxidative coupling of dibenzyl(difurfuryl)disulfides with amines: a rapid and efficient protocol for thioamides

An efficient protocol for synthesis of thioamides was developed via the microwave-assisted iodine-catalyzed oxidative coupling of dibenzyl(difurfuryl)disulfides with amines. This process is scalable and tolerates a wide spectrum of amines to deliver the corresponding products in moderate to excellent yields in 10 minutes, providing a cheap and rapid approach to thioamides.

(Z)-Tetrahydrothiophene and (Z)-tetrahydrothiopyran synthesis through nucleophilic substitution and intramolecular cycloaddition of alkynyl halides and EtOCS2K

This protocol provides a novel, environmentally friendly and simple method for the synthesis of (Z)-tetrahydrothiophene derivatives using the nucleophilic thiyl radical intramolecular cycloaddition cascade process to construct C-S bonds under transition-metal-free conditions. This transformation process offers a broad substrate scope, good functional group tolerance, and excellent stereoselectivity (Z/E ratios up to 99/1). Moreover, the process uses odourless, stable and cheap EtOCS2K as the sulfur source.

Aryl Methyl Sulfone Construction from Eco-Friendly Inorganic Sulfur Dioxide and Methyl Reagents

A three-component cross-coupling protocol of boronic acid, sodium metabisulfite, and dimethyl carbonate was developed for the construction of significant functional methyl sulfones, in which introduction of sulfur dioxide at the last stage was successfully achieved in one step. Inorganic sodium metabisulfite was used as an eco-friendly sulfur dioxide source. Green dimethyl carbonate was employed as methyl reagent in this transformation. Diverse functional methyl sulfones were obtained from various readily available boronic acids. Notably, the last-stage modification of pharmaceuticals and the synthesis of Firocoxib were efficiently established through this strategy.

Transition metal-free α-Csp3-H oxidative sulfuration of benzyl thiosulfates with anilines to form N-aryl thioamides

A metal-free approach to N-aryl thioamides from Bunte salts and anilines in DMSO has been developed. This method tolerated a wide range of functional groups on the aromatic ring, providing an ideal way to N-aryl thioamides in good to excellent yields from cheap and easily available starting materials. A plausible mechanism was also proposed based on the X-ray single crystal diffraction, NMR and MS analyses of DMSO-concerning intermediates.

Visible-light-mediated difunctionalization of vinylcyclopropanes for the synthesis of 1-sulfonylmethyl-3,4-dihydronaphthalenes

An efficient method for the visible-light-mediated sulfonylation/arylation of the C–C σ-bond in vinylcyclopropanes with sulfonyl chlorides to synthesize 1-sulfonylmethyl-substituted 3,4-dihydronaphalenes has been developed.

Silver-mediated oxidative C–C bond sulfonylation/arylation of methylenecyclopropanes with sodium sulfinates: facile access to 3-sulfonyl-1,2-dihydronaphthalenes

The novel AgNO₃-mediated sulfonylation/arylation of a C–C σ-bond in MCPs with sodium sulfinates to synthesize 3-sulfonylated 1,2-dihydronaphthalenes is reported.