Pd-Catalyzed Acyl C-O Bond Activation for Selective Ring-Opening of α-Methylene-β-lactones with Amines

Advances in Catalytic C–F Bond Activation and Transformation of Aromatic Fluorides

The activation and transformation of C–F bonds in fluoro-aromatics is a highly desirable process in organic chemistry. It provides synthetic methods/protocols for the generation of organic compounds possessing single or multiple C–F bonds, and effective catalytic systems for further study of the activation mode of inert chemical bonds. Due to the high polarity of the C–F bond and it having the highest bond energy in organics, C–F activation often faces considerable academic challenges. In this mini-review, the important research achievements in the activation and transformation of aromatic C–F bond, catalyzed by transition metal and metal-free systems, are presented.

Buchwald-Hartwig Amination of Aryl Esters and Chlorides catalyzed by Dianisole-decorated Pd-NHC complex

A modular and generic method for the Buchwald-Hartwig amination reactions of relatively unreactive aryl esters as acyl electrophiles and aryl chlorides as aryl electrophiles is developed, delivering efficient synthesis of...

α-Methylene-β-Lactone Scaffold for Developing Chemical Probes at the Two Ends of the Selectivity Spectrum

The utilities of an α-methylene-β-lactone (MeLac) moiety as a warhead composed of multiple electrophilic sites are reported. We demonstrate that a MeLac-alkyne not only reacts with diverse proteins as a broadly reactive measurement probe, but also recruits reduced endogenous glutathione (GSH) to assemble a selective chemical probe of GSH-β-lactone (GSH-Lac)-alkyne in live cells. Tandem mass spectrometry reveals that MeLac reacts with nucleophilic cysteine, serine, lysine, threonine, and tyrosine residues, through either Michael or acyl addition. A peptide-centric proteomics platform demonstrates that the proteomic selectivity profiles of orlistat and parthenolide, which have distinct reactivities, are measurable by MeLac-alkyne as a high-coverage probe. The GSH-Lac-alkyne selectively probes the glutathione S-transferase P responsible for multidrug resistance. The assembly of the GSH-Lac probe exemplifies a modular and scalable route to develop selective probes with different recognizing moieties.

A Type of Structurally Adaptable Aromatic Spiroketal Based Chiral Diphosphine Ligands in Asymmetric Catalysis

ConspectusWhile spectacular successes have been achieved in homogeneous catalysis with the use of achiral diphosphine ligands featuring a wide natural bite angle, such as XantPhos, chiral diphosphines that can induce a large P-M-P bite angle in their transition metal complexes are conspicuously less explored in asymmetric catalysis, probably due to the challenges in the identification and efficient construction of a suitable chiral backbone. In the past decade, a highly efficient synthesis of chiral aromatic spiroketals and the corresponding diphosphine ligands (SKPs) has been developed in this group.Based on a one-pot catalytic tandem double asymmetric hydrogenation-spiroketalization ring-closure reaction sequence, these SKP ligands featuring an extraordinarily long P···P distance and a flexible backbone have been readily prepared in large scale. Remarkably versatile coordination modes have been found in the complexes of SKP with some catalysis-relevant transition metals, for example, Pd, Cu, Au, and Rh. Whereas SKP enforces an unusually large bite angle in [Pd(SKP)Cl₂] and [Cu(SKP)Cl] complexes (160.1° and 132.8°, respectively), it also allows for a bimetallic Au-Au interaction (3.254 Å) in the complex of [Au₂(SKP)Cl₂] or a square-planar coordination geometry for the [Rh(SKP)(cod)]SbF₆ complex. Such an adaptable nature of SKP ligands for transition metal coordination has profound consequences in homogeneous asymmetric catalysis, as demonstrated by their unique performance in several types of catalytic asymmetric reactions. One of the most exciting examples is SKP/Pd-catalyzed asymmetric allylic amination of Morita-Baylis-Hillman (MBH) adducts, in which SKP/Pd complexes demonstrated excellent control of regio- and enantioselectivities and exhibited exceptionally high efficiency (with a TON up to 4750) in the catalysis. SKP ligands have also found a diversity of successful applications in Cu-, Au-, or Rh-catalyzed asymmetric reactions, further attesting their wide utilities in asymmetric catalysis. Overall, this class of readily accessible SKP ligands featuring a chiral aromatic spiroketal skeleton have demonstrated unique adaptable structures in a variety of transition metal complexes and provided outstanding performance in some difficult asymmetric transformations. The works delineated herein would be expected to stimulate further research efforts on the application of this type of chiral ligand and to provide useful clues in the design of new chiral diphosphine ligands with adaptable bite angles for transition metal catalyzed asymmetric reactions.

Strain-Driven Dyotropic Rearrangement: A Unified Ring-Expansion Approach to α-Methylene-γ-butyrolactones

An unprecedented strain-driven dyotropic rearrangement of α-methylene-β-lactones has been realized, which enables the efficient access of a wide range of α-methylene-γ-butyrolactones displaying remarkable structural diversity. Several appealing features of the reaction, including excellent efficiency, high stereospecificity, predictable chemoselectivity and broad substrate scope, render it a powerful tool for the synthesis of MBL-containing molecules of either natural or synthetic origin. Both experimental and computational evidences suggest that the new variant of dyotropic rearrangements proceed in a dualistic pattern: while an asynchronous concerted mechanism most likely accounts for the reactions featuring hydrogen migration, a stepwise process involving a phenonium ion intermediate is favored in the cases of aryl migration. The great synthetic potential of the title reaction is exemplified by its application to the efficient construction of several natural products and relevant scaffolds.

Lossen Rearrangement vs C-N Reductive Elimination Enabled by Rh(III)-Catalyzed C-H Activation/Selective Lactone Ring-Opening: Chemodivergent Synthesis of Quinolinones and Dihydroisoquinolinones

An unprecedented Rh(III)-catalyzed cascade C-H activation/Lossen rearrangement of aromatic amides with methyleneoxetanones has been realized along with a tunable C-N bond reductive elimination/trans esterification, giving divergent access to quinolinones and dihydroisoquinolinones via selective ring-opening of the four-membered lactone unit. Combined computational and experimental mechanistic studies defined the solvent-involved distinguished reaction paths, the origin of the observed chemodivergence, as well as the role of the substituent attached at the oxidizing directing group in tuning the reaction outcomes.

Ligand-Controlled Palladium-Catalyzed Carbonylation of Alkynols: Highly Selective Synthesis of α-Methylene-β-Lactones

The first general and regioselective Pd-catalyzed cyclocarbonylation to give α-methylene-β-lactones is reported. Key to the success for this process is the use of a specific sterically demanding phosphine ligand based on N-arylated imidazole (L11) in the presence of Pd(MeCN)2 Cl2 as pre-catalyst. A variety of easily available alkynols provide under additive-free conditions the corresponding α-methylene-β-lactones in moderate to good yields with excellent regio- and diastereoselectivity. The applicability of this novel methodology is showcased by the direct carbonylation of biologically active molecules including natural products.

Pyrolysis of Polyethylene Terephthalate over Carbon-Supported Pd Catalyst

Pyrolysis of polyethylene terephthalate (PET) produces polycyclic hydrocarbons and biphenyl derivatives that are harmful to human health and the environment. Therefore, a palladium metal catalyst (5 wt.% Pd loaded on activated carbon) was used to prevent the formation of harmful materials. When a Pd catalyst/PET ratio of 0.01 was applied in pyrolysis of PET, it did not show a meaningful difference in the generation of polycyclic hydrocarbons and biphenyl derivatives. However, when a Pd catalyst/PET ratio of 0.05 was used during pyrolysis, it prevented their formation and generation at experimental temperature ranges (400–700 °C). For example, the concentration of 2-naphthalenecarboxylic acid produced, which is a typical polycyclic hydrocarbon material, was reduced by 44%. In addition, the concentration of biphenyl-4-carboxylic acid, which is contained in biphenyl derivatives, was reduced by 79% compared to non-catalytic pyrolysis at 800 °C. This was because the ring-opening reaction and free radical mechanism caused by the Pd catalyst and thermal cracking were dominant during the pyrolysis of PET. Apart from these materials, amine compounds were generated as products of the pyrolysis of PET. Amine concentration showed a similar trend with polycyclic hydrocarbons and benzene derivatives. Based on these results, the total concentration of polycyclic hydrocarbons and biphenyl derivatives was compared; the results confirmed that the concentrations of all substances were reduced. This research suggests that a metal-supported catalyst will help create a more environmentally friendly and reliable method of industrial plastic waste disposal.

Nickel-Catalyzed Decarbonylative Amination of Carboxylic Acid Esters

The reaction of carboxylic acid derivatives with amines to form amide bonds has been the most widely used transformation in organic synthesis over the past century. Its utility is driven by the broad availability of the starting materials as well as the kinetic and thermodynamic driving force for amide bond formation. As such, the invention of new reactions between carboxylic acid derivatives and amines that strategically deviate from amide bond formation remains both a challenge and an opportunity for synthetic chemists. This report describes the development of a nickel-catalyzed decarbonylative reaction that couples (hetero)aromatic esters with a broad scope of amines to form (hetero)aryl amine products. The successful realization of this transformation was predicated on strategic design of the cross-coupling partners (phenol esters and silyl amines) to preclude conventional reactivity that forms inert amide byproducts.

Rhodium(iii)-catalyzed chemoselective C–H functionalization of benzamides with methyleneoxetanones controlled by the solvent

A Rh(iii)-catalyzed and solvent-controlled double chemoselective C–H functionalization of common benzamides with methyleneoxetanone has been realized.

Synthesis of benzoazepine derivatives via Rh(iii)-catalyzed inert C(sp2)–H functionalization and [4 + 3] annulation

A novel synthesis of benzoazepine derivatives via Rh(iii)-catalyzed inert C(sp²)–H bond functionalization and [4 + 3] annulation is presented.

Rapidly Activating Pd-Precatalyst for Suzuki-Miyaura and Buchwald-Hartwig Couplings of Aryl Esters

Esters are valuable electrophiles for cross-coupling due to their ubiquity and ease of synthesis. However, harsh conditions are traditionally required for the effective cross-coupling of ester substrates. Utilizing a recently discovered precatalyst, Pd-catalyzed Suzuki-Miyaura and Buchwald-Hartwig reactions involving cleavage of the C(acyl)-O bond of aryl esters that proceed under mild conditions are reported. The Pd(II) precatalyst is highly active because it is reduced to the Pd(0) active species more rapidly than previous precatalysts.

Rh-Catalyzed Conjugate Addition of Aryl and Alkenyl Boronic Acids to α-Methylene-β-lactones: Stereoselective Synthesis of trans-3,4-Disubstituted β-Lactones

A one-step preparation of 3,4-disubstituted β-lactones through Rh-catalyzed conjugate addition of aryl or alkenyl boronic acids to α-methylene-β-lactones is described. The operationally simple, stereoselective transformation provides a broad range of β-lactones from individual α-methylene-β-lactone templates. This methodology allowed for a direct, final-step C-3 diversification of nocardiolactone, an antimicrobial natural product.