(Z)-Selective Hydrosilylation of Terminal Alkynes with HSiMe(OSiMe3)2 Catalyzed by a Ruthenium Complex Containing an N-Heterocyclic Carbene

Dirhodium(II)/XantPhos Catalyzed Synthesis of β-(E)-Vinylsilanes via Hydrosilylation and Isomerization from Alkynes

A concise hydrosilylation of alkynes for synthesizing β-(E)-vinylsilanes catalyzed by dirhodium(II)/XantPhos has been developed. In this reaction, β-(E)-vinylsilanes were generated from the isomerization of β-(Z)-vinylsilanes catalyzed by dirhodium(II) hydride species rather than the direct insertion of triple bond into M-H or M-Si bond (traditional Chalk-Harrod mechanism or modified Chalk-Harrod mechanism). The hydrosilylation displayed a broad substrate scope for alkynes and tertiary silanes, tolerating diverse functional groups including halides, nitriles, amines, esters, and heterocycles.

Rh(I)/(III)-N-Heterocyclic Carbene Complexes: Effect of Steric Confinement Upon Immobilization on Regio- and Stereoselectivity in the Hydrosilylation of Alkynes

Rh(I) NHC and Rh(III) Cp* NHC complexes (Cp*=pentamethylcyclopentadienyl, NHC=N-heterocyclic carbene=pyrid-2-ylimidazol-2-ylidene (Py-Im), thiophen-2-ylimidazol-2-ylidene) are presented. Selected catalysts were selectively immobilized inside the mesopores of SBA-15 with average pore diameters of 5.0 and 6.2 nm. Together with their homogenous progenitors, the immobilized catalysts were used in the hydrosilylation of terminal alkynes. For aromatic alkynes, both the neutral and cationic Rh(I) complexes showed excellent reactivity with exclusive formation of the β(E)-isomer. For aliphatic alkynes, however, selectivity of the Rh(I) complexes was low. By contrast, the neutral and cationic Rh(III) Cp* NHC complexes proved to be highly regio- and stereoselective catalysts, allowing for the formation of the thermodynamically less stable β-(Z)-vinylsilane isomers at room temperature. Notably, the SBA-15 immobilized Rh(I) catalysts, in which the pore walls provide an additional confinement, showed excellent β-(Z)-selectivity in the hydrosilylation of aliphatic alkynes, too. Also, in the case of 4-aminophenylacetylene, selective formation of the β(Z)-isomer was observed with a neutral SBA-15 supported Rh(III) Cp* NHC complex but not with its homogenous counterpart. These are the first examples of high β(Z)-selectivity in the hydrosilylation of alkynes by confinement generated upon immobilization inside mesoporous silica.

Transition-Metal-Catalyzed Stereo- and Regioselective Hydrosilylation of Unsymmetrical Alkynes

Alkyne hydrosilylation is one of the most efficient methods for the synthesis of alkenyl silicon derivatives and has been a hot topic of research for decades. This short review summarizes the progress in transition-metal-catalyzed stereo- and regioselective hydrosilylation of unsymmetrical alkynes. Topics are discussed based on different types of alkynes and the selectivities.

1 Introduction

2 Terminal Alkyne Hydrosilylation

2.1 β-E Selectivity

2.2 β-Z Selectivity

2.3 α-selectivity

3 Internal Alkyne Hydrosilylation

3.1 Aryl–Alkyl Acetylenes

3.2 Alkyl–Alkyl Acetylenes

3.3 Internal Alkynes with Polarized Substituents

4 Summary and Outlook

(Z)-Selective Hydrosilylation and Hydroboration of Terminal Alkynes Enabled by Ruthenium Complexes with an N-Heterocyclic Carbene Ligand

Metal-catalyzed trans-1,2-hydrosilylations and hydroborations of terminal alkynes that generate synthetically valuable (Z)-alkenylsilanes and (Z)-alkenylboranes remain challenging due to the (E)-selective nature of the reactions and the formation of the thermodynamically unfavorable (Z)-isomer. The development of new, efficient catalytic systems for the (Z)-selective hydrosilylation and hydroboration of terminal alkynes is thus highly desirable from a fundamental perspective as it would deepen our understanding of the metal-catalyzed (Z)-selective hydrosilylation and hydroboration of terminal alkynes. This personal account describes our research for developing a ruthenium complex that can efficiently catalyze the hydrosilylation and hydroboration of terminal alkynes, and for exploring the factors controlling (Z)-selectivity of the reactions. Our effort into the activation of B-protected boronic acids, R-B(dan) (dan=naphthalene-1,8-diaminato), that was believed not to participate in Suzuki-Miyaura cross-coupling, is also discussed.

C–H hetero-functionalization of arenes through palladacyclopentane-type intermediates

In this review article, we summarized recent advances in C–H hetero-functionalization of arenes through palladacyclopentane-type intermediates.

Supported Ni nanoparticles with a phosphine ligand as an efficient heterogeneous non-noble metal catalytic system for regioselective hydrosilylation of alkynes

A convenient and effective heterogeneous non-noble metal catalytic system for regioselective hydrosilylation of alkynes was successfully developed by the combination of Ni/Al2O3 with a xantphos ligand. The resulting catalytic system displayed excellent catalytic performance in the heterogeneous hydrosilylation of PhSiH3 with a wide range of aromatic and aliphatic terminal alkynes, affording the corresponding (E)-vinylsilanes in good to excellent yields with high regioselectivity.

Highly Efficient and Reusable Alkyne Hydrosilylation Catalysts Based on Rhodium Complexes Ligated by Imidazolium-Substituted Phosphine

Rhodium complexes ligated by imidazolium-substituted phosphine were used as catalysts in the hydrosilylation of alkynes (1-heptyne, 1-octyne, and phenylacetylene) with 1,1,1,3,5,5,5-heptamethyltrisiloxane (HMTS) or triethylsilane (TES). In all cases, the above complexes showed higher activity and selectivity compared to their precursors ([Rh(PPh3)3Cl] and [{Rh(µ-Cl)(cod)}2]). In the reactions with aliphatic alkynes (both when HMTS and TES were used as hydrosilylating agents), β(Z) isomer was mainly formed, but, in the reaction of phenylacetylene with TES, the β(E) product was formed. The catalysts are very durable, stable in air and first and foremost insoluble in the reactants which facilitated their isolation and permitted their multiple use in subsequent catalytic runs. They make a very good alternative to the commonly used homogeneous catalysts.

Construction of highly sterically hindered 1,1-disilylated terminal alkenes

One direct and efficient procedure for the synthesis of 1,1-disilylated terminal alkenes is demonstrated in this paper. To overcome and rationally utilize the steric hindrance of silyl units, the cationic ruthenium catalyst [CpRu(MeCN)3]+ was found to be effective for Markovnikov hydrosilylation of 1-silyl terminal alkynes with high yields and excellent regioselectivity. Dissimilarities between alkyl and alkoxy silyl units lead to versatile product derivatizations toward a variety of useful building blocks.

Regiocontrol in the cobalt-catalyzed hydrosilylation of alkynes

A highly versatile cobalt-catalyzed hydrosilylations of alkynes is reported. Near-perfect regiocontrol/stereocontrol was induced by the choice of the ligand: bidentate phosphines afforded (E)-β-vinylsilanes; α-vinylsilanes formed with bipyridine ligands.

Hydrofunctionalizations of unsaturated hydrocarbons are key strategies for the synthesis of functionalized building blocks. Here, we report highly versatile cobalt-catalyzed hydrosilylations of alkynes that operate with minute amounts of the inexpensive, bench-stable pre-catalyst Co(OAc)₂·4H₂O under mild conditions (0.1–1 mol%, THF, r.t., 1 h). Near-perfect regiocontrol/stereocontrol was induced by the choice of the ligand: bidentate phosphines afforded (E)-β-vinylsilanes; α-vinylsilanes formed with bipyridine ligands.

Highly β( Z)-Selective Hydrosilylation of Terminal Alkynes Catalyzed by Thiolate-Bridged Dirhodium Complexes

A series of novel monothiolate-bridged dirhodium complexes, [Cp*Rh(μ-SR)(μ-Cl)₂RhCp*][BF₄] {Cp* = η⁵-C₅Me₅, R = tertiary butyl ( ^tBu), 1a; R = ferrocenyl (Fc), 1b; R = adamantyl (Ad), 1c} were designed and successfully synthesized, which can smoothly facilitate highly regioselective and stereoselective hydrosilylation of terminal alkynes to afford β( Z) vinylsilanes with good functional group compatibility. Furthermore, the hydride bridged dirhodium complex [Cp*Rh(μ-S ^tBu)(μ-Cl)(μ-H)RhCp*][BF₄] (5) as a potential intermediate was obtained by the reaction of 1a with excess HSiEt₃.

N-Heterocyclic carbene-based ruthenium-hydride catalysts for the synthesis of unsymmetrically functionalized double-decker silsesquioxanes

The [RuHCl(CO)(SIDip)(PCy₃)] complex efficiently catalyzes the (E)-selective silylative coupling of divinyl-substituted double-decker silsesquioxanes with two distinctly substituted styrenes.

Stereoselective Synthesis of Z-Vinylsilanes via Palladium-Catalyzed Direct Intermolecular Silylation of C(sp2)-H Bonds

An efficient and convenient palladium-catalyzed direct intermolecular silylation of C(sp²)-H bonds by using disilanes as the silicon source with the assistance of a readily removable bidentate directing group is reported. This strategy provided a regio- and stereoselective protocol for exclusive synthesis of Z-vinylsilanes with reasonable to excellent yields and good functional group compatibility. Silylation of the isolated palladacycle intermediate revealed the Z-stereoselective pathway. Moreover, the practicality and effectiveness of this method were illustrated by a gram-scale experiment and further functionalization of the silylation product.