Ligand-Controlled Copper(I)-Catalyzed Cross-Coupling of Secondary and Primary Alcohols to α-Alkylated Ketones, Pyridines, and Quinolines

An NNN Pd(II) pincer complex with 1,1-diaminoazine: a versatile catalyst for acceptorless dehydrogenative coupling reactions

An azine-based, non-palindromic, neutral NNN-pincer ligand was synthesised in a single step with an yield of 85%. The palladation of the ligand, using Pd(OAc)2, was performed in acetonitrile at room temperature to obtain the pincer complex in 88% yield through a simple, cost-effective, and straightforward synthetic procedure. The structure of the complex was confirmed by 1H NMR, 13C NMR, FT-IR, and mass spectrometry. The variable temperature NMR spectra revealed the stability of the complex even at higher temperatures, a characteristic feature of pincer complexes. The generated complex proved to be a versatile catalyst for Acceptorless Dehydrogenative Coupling (ADC) to synthesize N-heterocycles: (i) 1,2-disubstituted benzimidazoles, (ii) 2-phenylquinolines, (iii) 2-phenylquinoxalines and (iv) 2-phenylquinazolinones. Since the side products of the reactions are H2O and H2 gas, the catalysis can be considered as a green catalytic process. Quantum chemical calculations indicated the participation of a possible nitrene-imide conversion process during the Metal-Ligand Cooperation (MLC) in ADC reactions.

Organometallic Ru(III) Catalysts for α-Alkylation of Carbonyl Compounds using Alcohols: Mechanistic Insights via Detection of Key Intermediates

Three novel cyclometalated ruthenium complexes ([Ru.L(9)] [Ru.L(10)] and [Ru.L(11)]) featuring azo functionalities were synthesized and characterized using a variety of spectroscopic techniques, namely FT-IR, electronic absorption spectroscopy, and ESI-MS. Representative solid-state structures of the acquired complexes were determined through X-ray crystallography. These complexes were evidenced to be efficient catalysts for the synthesis of various α-alkylated compounds utilizing simple acetophenone derivatives with easily affordable and economically viable alcohols, which were isolated and characterized via 1H and 13C NMR spectroscopy. The optimum reaction conditions were found by employing toluene as solvent and potassium tert-butoxide as a base at 115 °C temperature utilizing 0.8 mol % of catalyst [Ru.L(10)]. The yield of the desired compounds was found to be in the range of 83-97 %. Additionally, mass spectrometry provided insights into the in-situ generated ruthenium hydride and ruthenium alkoxy intermediates, shedding light on the catalytic mechanism.

Iron-Catalyzed sp3 C-H Alkylation of Fluorene with Primary and Secondary Alcohols: A Borrowing Hydrogen Approach

The utilization of earth-abundant, cheap, and nontoxic transition metals in important catalytic transformations is essential for sustainable development, and iron has gained significant attention as the most abundant transition metal. A mixture of FeCl2 (3 mol %), phenanthroline (6 mol %), and KOtBu (0.4 eqivalent) was used as an effective catalyst for the sp3 C-H alkylation of fluorene using alcohol as a nonhazardous alkylating partner, and eco-friendly water was formed as the only byproduct. The substrate scope includes a wide range of substituted fluorenes and substituted benzyl alcohols. The reaction is equally effective with challenging secondary alcohols and unactivated aliphatic alcohols. Selective mono-C9-alkylation of fluorenes with alcohols yielded the corresponding products in good isolated yields. Various postfunctionalizations of C-9 alkylated fluorene products were performed to establish the practical utility of this catalytic alkylation. Control experiments suggested a homogeneous reaction path involving borrowing hydrogen mechanism with the formation and subsequent reduction of 9-alkylidene fluorene intermediate.

Copper-catalyzed C(sp3)-H alkylation of fluorene with primary and secondary alcohols using a borrowing hydrogen method

Despite the limited success of copper-catalyzed alkylations, (NNS)CuCl proved to be an effective catalyst for the sp3 C-H alkylation of fluorene with alcohols. Various primary alcohols and challenging secondary alcohols were successfully used. The practical applicability of the method was effectively tested with several post-functionalization reactions. This copper-catalyzed alkylation of fluorene involved a borrowing hydrogen mechanism.

Potent pincer-zinc catalyzed homogeneous α-alkylation and Friedländer quinoline synthesis reaction of secondary alcohols/ketones with primary alcohols

Herein, we describe an air- and moisture-stable, homogeneous zinc catalyst stabilised using an electron deficient N^N^N pincer-type ligand. This ternary, penta-coordinated neutral molecular catalyst [Zn(N^N^N)Cl2] selectively produces α-alkylated ketone derivatives (14 examples) through a one-pot acceptorless dehydrogenative coupling (ADC) reaction between secondary and primary alcohols using the borrowing hydrogen (BH) approach in good to excellent isolated yields (up to 93%). It is worth noting that this catalyst also provides an eco-friendly route for the synthesis of quinoline derivatives (30 examples) using 2-aminobenzyl alcohols as alkylating agents via successive dehydrogenative coupling and N-annulation reactions. This cost effective, easy to synthesize and environmentally benign catalyst shows excellent stability in catalytic cycles under open-air conditions, as evident from its high turnover number (∼104), and is activated by using a catalytic amount of base under milder conditions.

Iron- and base-catalyzed C(α)-alkylation and one-pot sequential alkylation-hydroxylation of oxindoles with secondary alcohols

The utilization of economical and environmentally benign transition metals in crucial catalytic processes is pivotal for sustainable advancement in synthetic organic chemistry. Iron, as the most abundant transition metal in the Earth's crust, has gained significant attention for this purpose. A combination of FeCl2 (5 mol%) in the presence of phenanthroline (10 mol%) and NaOtBu (1.5 equivalent) proved effective for the C(α)-alkylation of oxindole, employing challenging secondary alcohol as a non-hazardous alkylating agent. The C(α)-alkylation of oxindole was optimized in green solvent or under neat conditions. The substrate scope encompasses a broad array of substituted oxindoles with various secondary alcohols. Further post-functionalization of the C(α)-alkylated oxindole products demonstrated the practical utility of this catalytic alkylation. One-pot C-H hydroxylation of alkylated oxindoles yielded 3-alkyl-3-hydroxy-2-oxindoles using air as the most sustainable oxidant. Low E-factors (3.61 to 4.19) and good Eco-scale scores (74 to 76) of these sustainable catalytic protocols for the alkylation and one-pot sequential alkylation-hydroxylation of oxindoles demonstrated minimum waste generation. Plausible catalytic paths are proposed on the basis of past reports and control experiments, which suggested that a borrowing hydrogen pathway is involved in this alkylation.

Nickel-Catalyzed α-Alkylation of Arylacetonitriles with Challenging Secondary Alcohols

Nickel(II) complex 1 was utilized as a sustainable catalyst for α-alkylation of arylacetonitriles with challenging secondary alcohols. Arylacetonitriles with a wide range of functional groups were tolerated, and various cyclic and acyclic secondary alcohols were utilized to yield a large number of α-alkylated products. The plausible mechanism involves the base-promoted activation of precatalyst 1 to an active catalyst 2 (dehydrochlorinated product) which activates the O-H and C-H bonds of the secondary alcohol in a dehydrogenative pathway.

Alcohols as Substrates in Transition-Metal-Catalyzed Arylation, Alkylation, and Related Reactions

Alcohols are abundant and attractive feedstock molecules for organic synthesis. Many methods for their functionalization require them to first be converted into a more activated derivative, while recent years have seen a vast increase in the number of complexity-building transformations that directly harness unprotected alcohols. This Review discusses how transition metal catalysis can be used toward this goal. These transformations are broadly classified into three categories. Deoxygenative functionalizations, representing derivatization of the C-O bond, enable the alcohol to act as a leaving group toward the formation of new C-C bonds. Etherifications, characterized by derivatization of the O-H bond, represent classical reactivity that has been modernized to include mild reaction conditions, diverse reaction partners, and high selectivities. Lastly, chain functionalization reactions are described, wherein the alcohol group acts as a mediator in formal C-H functionalization reactions of the alkyl backbone. Each of these three classes of transformation will be discussed in context of intermolecular arylation, alkylation, and related reactions, illustrating how catalysis can enable alcohols to be directly harnessed for organic synthesis.

Schiff-base Polymer Immobilized Ruthenium for Efficient Catalytic Cross-coupling of Secondary Alcohols with 2-amino- and γ-aminobenzyl Alcohols to Give Quinolines and Pyridines

A Schiff-base porous polymer has been impregnated with ruthenium trichloride for acceptor-free dehydrogenation coupling (ADC) of secondary alcohols with γ-amino- and 2-aminobenzyl alcohols to give pyridines and quinolines. This heterogenous catalyst exhibited high catalytic efficiency over repeated cycles with wide functional group tolerance.

α-Alkylation of ketones with primary alcohols by an active non-noble metal Cu/CuOx catalyst

Development of convenient and effective heterogeneous non-noble metal catalysts for α-alkylation of ketones with alcohols is challenging in heterogeneous catalysis. Here, we report active non-noble metal Cu/CuOx catalysts for the construction of C-C bonds by the α-alkylation of ketones with alcohols through the borrowing hydrogen methodology. The optimal Cu/CuOx-250 catalyst exhibits good catalytic performance in the reactions to give the corresponding products in 50-96% yields. The Cu/CuOx catalysts are characterized by different analysis techniques such as XRD, TEM, XPS, H2-TPR, BET, and ICP. Moreover, the catalyst can be reused at least for five successive cycles without significant loss of activity. The present study provides meaningful insights into the development of non-noble metal heterogeneous catalysts for α-alkylation of ketones with alcohols.

Nickel-Catalyzed Chemodivergent Coupling of Alcohols: Efficient Routes to Access α,α-Disubstituted Ketones and α-Substituted Chalcones

Chemodivergent (de)hydrogenative coupling of primary and secondary alcohols is achieved utilizing an inexpensive nickel catalyst, (6-OH-bpy)NiCl2 . This protocol demonstrates the synthesis of branched carbonyl compounds, α,α-disubstituted ketones, and α-substituted chalcones via borrowing hydrogen strategy and acceptorless dehydrogenative coupling, respectively. A wide range of aryl-based secondary alcohols are coupled with various primary alcohols in this tandem dehydrogenation/hydrogenation reaction. The nickel catalyst, along with KOt Bu or K2 CO3 , governed the selectivity for the formation of branched saturated ketones or chalcones. A preliminary mechanistic investigation confirms the reversible dehydrogenation of alcohols to carbonyls via metal-ligand cooperation (MLC) and the involvement of radical intermediates during the reaction.

Titanium-Catalyzed Selective N-Alkylation of Amines with Alcohols via Borrowing Hydrogen Methodology

The N-alkylation of amines with alcohols using earth-abundant and nonprecious metal catalysts has gained considerable attention in the pharmaceutical industry. We described titanium-catalyzed synthetic protocol for N-alkylation of amines with alcohols via borrowing hydrogen or hydrogen autotransfer reactions. The methodology enables the selective monoalkylation of various substituted (hetero)aromatic amines in good to excellent yields (up to 97% yield). The importance of the protocol was further demonstrated by the applicability of earth-abundant metal catalysis and the synthesis of 32 N-alkylated amines. The work allows the utilization of titanium-based catalysts for various reactions to expand the nature blueprint in catalysis.

Manganese-Catalyzed Chemoselective Coupling of Secondary Alcohols, Primary Alcohols and Methanol

Herein, we report a manganese-catalyzed three-component coupling of secondary alcohols, primary alcohols and methanol for the synthesis of β,β-methylated/alkylated secondary alcohols. Using our method, a series of 1-arylethanol, benzyl alcohol derivatives, and methanol undergo sequential coupling efficiently to construct assembled alcohols with high chemoselectivity in moderate to good yields. Mechanistic studies suggest that the reaction proceeds via methylation of a benzylated secondary alcohol intermediate to generate the final product.

Divergent upgrading pathways of sulfones with primary alcohols: nickel-catalyzed α-alkylation under N2 and metal-free promoted β-olefination in open air

We report here our findings on the diverse reaction results of sulfones and alcohols. In the presence of NiCl₂/P(t-Bu)₃ and under a N₂ atmosphere, α-C-alkylation of sulfones with alcohols occurs through a borrowing-hydrogen mechanism; when the reaction was carried out in the open air without nickel, the product was not the predicted α,β-unsaturated sulfone, but the β-alkenyl sulfone, which is a useful building block in organic synthesis.

One pot tandem dehydrogenative cross-coupling of primary and secondary alcohols by ruthenium amido-functionalized 1,2,4-triazole derived N-heterocyclic carbene complexes

One-pot tandem dehydrogenative cross-coupling of primary and secondary alcohols was catalyzed by three ruthenium complexes [1-(R)-4-N-(furan-2-ylmethyl)acetamido-1,2,4-triazol-5-ylidene]Ru(p-cymene)Cl [R = Et (1b), i-Pr (2b), Bn (3b)], of amido-functionalized 1,2,4-triazole derived N-heterocyclic carbene (NHC) ligands. Density Functional Theory (DFT) calculations were employed for the ruthenium (1b) precatalyst to understand this reaction mechanism completely, and the mechanisms adapted are divided categorically into three steps (i) nucleophilic substitution of chloride ions by alcohols, (ii) dehydrogenation of primary and secondary alcohols, and (iii) olefin and ketone hydrogenation. Our mechanistic study reveals that the formation of a deprotonated Ru-alcoholate (A) or (E) intermediate is favorable compared to the protonated form (A') or (E') from (1b) by associative nucleophilic substitution. Though an ionic pathway that proceeds through (A') or (E'), has less barriers in the dehydrogenation and olefin/ketone hydrogenation steps than that of the neutral pathway, proceeding through (A) or (E), a steep energy barrier was observed in the first nucleophilic substitution step, prohibiting the reaction to proceed via the intermediate (A') or (E'). Thus, our thorough mechanistic study reveals that the reaction proceeds via deprotonated Ru-alcoholate (A) or (E) species. Furthermore, the 1,4 addition of an α,β-unsaturated carbonyl compound is kinetically and thermodynamically favorable over the 1,2 addition, and the experiments support these observations. As a testimony towards practical application in synthesizing bio-active flavonoid based natural products, five different flavan derivatives (16-20), were synthesized by the dehydrogenative coupling reaction using the neutral ruthenium (1-3)b complexes.

Transition-metal-free approach to quinolines via direct oxidative cyclocondensation reaction of N,N-dimethyl enaminones with o-aminobenzyl alcohols

A transition-metal-free method for the construction of 3-substituted or 3,4-disubstituted quinolines from readily available N,N-dimethyl enaminones and o-aminobenzyl alcohols is reported. The direct oxidative cyclocondensation reaction tolerates broad functional groups, allowing the efficient synthesis of various quinolines in moderate to excellent yields. The reaction involves a C (sp3)-O bond cleavage and a C=N bind and a C=C bond formation during the oxidative cyclization process, and the mechanism was proposed.

Ruthenium Complexes Bearing α-Diimine Ligands and Their Catalytic Applications in N-Alkylation of Amines, α-Alkylation of Ketones, and β-Alkylation of Secondary Alcohols

New Ru(II) complexes encompassing α-diimine ligands were synthesized by reacting ruthenium precursors with α-diimine hydrazones. The new ligands and Ru(II) complexes were analyzed by analytical and various spectroscopic methods. The molecular structures of L₁ and complexes 1, 3, and 4 were determined by single-crystal XRD studies. The results reveal a distorted octahedral geometry around the Ru(II) ion for all complexes. Moreover, the new ruthenium complexes show efficient catalytic activity toward the C-N and C-C coupling reaction involving alcohols. Particularly, complex 3 demonstrates effective conversion in N-alkylation of aromatic amines, α-alkylation of ketones, and β-alkylation of alcohols.

Selective Synthesis of Ketones and Chiral Allylic Alcohols from the Addition of Arylboronic Acids to α,β-Unsaturated Aldehydes Mediated by a Transition Metal/Monophosphorus Ligand System

Here, we demonstrated a transition metal-mediated/monophosphorus ligand system for the selective synthesis of ketones or chiral allylic alcohols in high yields/enantiomeric excess from the 1,2-addition of arylboronic acids to α,β-unsaturated aldehydes. Notably, isomerization of the chiral allylic alcohols to ketones was suppressed by the Ru-catalyzed/monophosphorus ligand system. The asymmetric catalytic system provides an alternative and efficient method of preparing chiral allylic alcohols.

RuII complexes of 1,2,3-triazole appended tertiary phosphines, [P(Ph){(o-C6H4)(1,2,3-N3C(Ph)CH}2] and [P(Ph){o-C6H4(CCH)-(1,2,3-N3-Ph)}2]: highly active catalysts for transfer hydrogenation of carbonyl/nitro compounds and for α-alkylation of ketones

The synthesis of two new 1,2,3-triazole appended monophosphines [P(Ph){(o-C₆H₄)(1,2,3-N₃C(Ph)CH}₂] (1) and [P(Ph){o-C₆H₄(CCH)(1,2,3-N₃-Ph)}₂] (2) and their Ru^II complexes is described. The reactions of 1 and 2 with [Ru(PPh₃)₃Cl₂] in a 1 : 1 molar ratio produced cationic complexes 3 and 4, respectively. Both the complexes showed very high catalytic activity towards transfer hydrogenation, nitro reduction, and α-alkylation reactions and afforded the corresponding products in good to excellent yields. The free energy of β-hydride elimination from the respective Ru-alkoxide intermediates, a key mechanistic step common to all the three catalytic pathways, was calculated to be close to ergoneutral by density functional theory-based calculations, which is posited to rationalize the catalytic activity of 3. The reduction of aromatic nitro compounds was found to be highly chemoselective and produced the corresponding amines as major products even in the presence of a carbonyl group. The triazolyl-N2 coordinated Ru^II-NPN complex 3 showed better catalytic activity compared to the triazolyl-N3 coordinated complex 4.

Chemoselective Transfer Hydrogenation of Enamides Using Ru Pincer Complexes for the Synthesis of α-Amino Acids

The chemoselective reduction of enamides to α-amino acids with iPrOH and EtOH as H-donors and solvents catalyzed by Ru pincer complexes is demonstrated. A range of α-amino acids is synthesized in good to excellent yields. Applications, large scale, and a one-pot experiment are also reported. Finally, deuterium-labeling experiments show high regioselectivity between the α- and β-positions of the alkene unit.

Construction of a (NNN)Ru-Incorporated Porous Organic Polymer with High Catalytic Activity for β-Alkylation of Secondary Alcohols with Primary Alcohols

Solid supports functionalized with molecular metal catalysts combine many of the advantages of heterogeneous and homogeneous catalysis. A (NNN)Ru-incorporated porous organic polymer (POP-bp/bbpRuCl₃) exhibited high catalytic efficiency and broad functional group tolerance in the C–C cross-coupling of secondary and primary alcohols to give β-alkylated secondary alcohols. This catalyst demonstrated excellent durability during successive recycling without leaching of Ru which is ascribed to the strong binding of the pincer ligands to the metal ions.

Guerbet-type β-alkylation of secondary alcohols catalyzed by chromium chloride and its corresponding NNN pincer complex

β-Alkylation of alcohols has been efficiently accomplished using readily available 3d metal Cr under microwave conditions in air. Well-defined molecular Cr is involved with a KIE of 7.33 and insertion of α-alkylated ketone into Cr–H bond as the RDS.

Ligand-free Guerbet-type reactions in air catalyzed by in situ formed complexes of base metal salt cobaltous chloride

Inexpensive, earth-abundant & environmentally benign CoCl2 efficiently catalyses the β-alkylation of alcohol in unprecedented yields (89%) & turnovers (8900). Mechanistic studies are indicative of in situ generated homogeneous molecular Co catalysts.

Rhodium-Catalyzed Dehydrogenative Annulation of N-Arylmethanimines with Vinylene Carbonate for Synthesizing Quinolines

Here we report a novel Rh-catalyzed C-H/C-H alkenylation of N-arylmethanimines with vinylene carbonate acting as a vinylene unit. Forty examples of C3,C4-nonsubstituted quinolines were achieved from commercially available starting materials. This identified process features an exceedingly simple system, a lower loading of catalyst, and the capacity for postfunctionalization with bioactive molecules.

Synthesis of α-Alkylated Ketones via Selective Epoxide Opening/Alkylation Reactions with Primary Alcohols

A new method for converting terminal epoxides and primary alcohols into α-alkylated ketones under borrowing hydrogen conditions is reported. The procedure involves a one-pot epoxide ring opening and alkylation via primary alcohols in the presence of an N-heterocyclic carbene iridium(I) catalyst, under aerobic conditions, with water as the side product.

Bromine radical as a visible-light-mediated polarity-reversal catalyst

Polarity-reversal catalysts enable otherwise sluggish or completely ineffective reactions which are characterized by unfavorable polar effects between radicals and substrates. We herein disclose that when irradiated by visible light, bromine can behave as a polarity-reversal catalyst. Hydroacylation of vinyl arenes, a three-component cascade transformation and deuteration of aldehydes were each achieved in a metal-free manner without initiators by using inexpensive N-bromosuccinimide as the precatalyst. Light is essential to generate and maintain the active bromine radical during the reaction process. Another key to success is that HBr can behave as an effective hydrogen donor to turn over the catalytic cycles.

•

Using bromine as a polarity-reversal catalyst to generate acyl radicals

•

Additive- and metal-free, atom- and step-economic, and operationally simple process

•

Using constant light-irradiation to induce and maintain bromine radicals

•

Access carbonyl compounds and deuterated aldehydes with wide substrate scope

Cross β-arylmethylation of alcohols catalysed by recyclable Ti-Pd alloys not requiring pre-activation

Ti-Pd alloy catalysts were developed for the cross β-arylmethylation between arylmethylalcohols and different primary alcohols via a hydrogen autotransfer mechanism. The alloy catalysts could be reused multiple times without the need for pre-activation. Analysis of the reaction solution by inductively coupled plasma atomic absorption spectroscopy indicated that only a minimal amount of Ti and no Pd was leached from the catalyst.

Nickel-catalyzed coupling of R2P(O)Me (R = aryl or alkoxy) with (hetero)arylmethyl alcohols

α-Alkylation of methyldiarylphosphine oxides with (hetero)arylmethyl alcohols was performed under nickel catalysis. Various arylmethyl and heteroarylmethyl alcohols can be used in this transformation. A series of methyldiarylphosphine oxides were alkylated with 30-90% yields. Functional groups on the aromatic rings of methyldiarylphosphine oxides or arylmethyl alcohols including OMe, NMe2, SMe, CF3, Cl, and F groups can be tolerated. The conditions are also suitable for the α-alkylation reaction of dialkyl methylphosphonates.

Mild and efficient copper-catalyzed oxidative cyclization of oximes with 2-aminobenzyl alcohols at room temperature: synthesis of polysubstituted quinolines

A simple and efficient ligand-free Cu-catalyzed protocol for the synthesis of polysubstituted quinolines via oxidative cyclization of oxime acetates with 2-aminobenzyl alcohols at room temperature has been developed. The presented approach provides a new synthetic pathway leading to polysubstituted quinolines with good functional group tolerance under mild conditions. Moreover, this transformation can be applied for the preparation of quinolines on a gram scale. Oxime acetates serve as the internal oxidants in the reactions, thus making this method very attractive.