Aminated Polysaccharide-Based Nanoassemblies as Stable Biocompatible Vehicles Enabling Crossing of Biological Barriers: An Effective Transdermal Delivery of Diclofenac Medicine

Effect of extraction method on the structure and bioactivity of polysaccharides from activated sludge

Resource recovery is a pivotal facet of waste activated sludge treatment, particularly within the framework of carbon neutrality and the circular economy. Polysaccharides are emerging as a valuable resource from waste activated sludge, and the choice of extraction method affects the properties of the polysaccharides, which is of utmost importance for subsequent application. This investigation examined the effects of six extraction methods (i.e., acidic, alkaline, ultrasonication, hot-water, microwave, and electric treatments) on the yield, chemical composition, structural characteristics, and bioactivities of polysaccharides extracted from sludge. For each extraction method, two operational parameters, namely the treatment time and strength (e.g., the acid and alkali concentration), were initially optimized in terms of the polysaccharide yield. The polysaccharide yield varied from 1.03 ± 0.12 % to 5.34 ± 0.10 % adopting the extraction methods under optimized conditions, and the alkaline extraction method had the highest yield of polysaccharides with a treatment time of 120 min and NaOH concentration of 1 %. At least one polysaccharide fraction was successfully purified from the crude polysaccharide of each extraction method. The compositions and structures of these fractions, including carbohydrate, protein, sulfate, uronic acid contents, and monosaccharide compositions, were determined. Carbohydrate was the dominant component, with the hot-water-2 fraction having the highest carbohydrate content (77.90 % ± 2.02 %). Monosaccharides in the polysaccharides were measured, with mannose, rhamnose, glucose, and xylose being found in all fractions, whereas ribose was exclusively found in the acid-1 fraction. The molecular weights of these fractions ranged between 1.60 × 104 Da and 7.11 × 106 Da. Furthermore, the bioactivities of the polysaccharides, encompassing five anti-oxidant and three anti-coagulant properties, were assessed, with the ultrasonication-1 fraction having superior performance in seven of the assays. Finally, the association among the fractions in terms of composition and bioactivity was assessed adopting cluster analysis and regression methods. The findings underscore the effect of the extraction method on the properties of polysaccharides extracted from sludge, thereby providing valuable insights for the prospective applications of polysaccharides.

Carboxymethyl chitosan-N-alkylimine derivatives: Synthesis, characterization and use for preservation of symbiotic biofertilizer bacteria on chickpea seeds

A series of carboxymethyl chitosan-N-alkylimine derivatives with side chain length of 4 to 10 carbons (CMCS-n, n = 4, 6, 8, 10) was prepared in a one-step solvent-free synthesis using Schiff base chemistry. The modified polysaccharides were characterized by their spectral, thermal and physical properties. The prepared polymers demonstrated an ability to spontaneous self-assembly with a clear correlation between critical aggregation concentration and the chain length of the alkyl substituent. N-alkylimine-CMCS derivatives were found to deliver hydrophobic (curcumin) and hydrophilic (ascorbic acid) active agents in unfavorable environments of water and oil, respectively. Then, N-alkylimine-CMCS derivatives were used as a platform for the delivery of symbiotic gram-positive bacteria Bacillus subtilis CJ onto chickpea seeds. These bacteria demonstrated a significantly higher survival rate (106 CFU/mL) in dried CMCS-6 derivative film than in other films tested. The seeds treated with N-alkylimine-CMCS coatings that contained B. subtilis CJ demonstrated up to 100-fold increase of this bacterial population on the seedlings in comparison to the pristine CMCS.

Nanogel Particles Based on Modified Nucleosides and Oligosaccharides as Advanced Delivery System

This work addresses the challenge of delivering bioactive molecules by designing biocompatible nanogel particles (NGPs) utilizing rationally modified nature-sourced building blocks: capryl-oligochitosan and oxidized inosine. Capryl substituents endowed the resultant NGPs with membrane-penetration capabilities, while purine-containing inosine allowed H-bond/π-π/π-cation interactions. The prepared NGPs were complexed with carboxyfluorescein-labeled single-stranded oligonucleotide (FAM-oligo) and DsRed-encoding plasmid DNA. The successful delivery of FAM-oligo to the cell cytoplasm of the Nicotiana benthamiana plant was observed. Alexa 555-labeled bovine serum albumin (Alexa 555-BSA) was also efficiently encapsulated and delivered to the plant. In addition to delivering FAM-oligo and Alexa 555-BSA separately, NGPs also successfully co-delivered both biomolecules to the plant. Finally, NGPs successfully encapsulated the drug amphotericin B and reduced its toxicity while maintaining its efficacy. The presented findings suggest that NGPs may become a promising platform for the advanced delivery of bioactive molecules in various applications.

Anthracenemethyl Glycosides as Supramolecular Synthons for Chiral Self-Assembly and as Probes in Cell Imaging

Chiral self-assembly of molecules warrants optimal structural features of synthons that promote formation of such self-assembled structures. A polyaromatic moiety coupled with hydrophilic, chiral-rich carbohydrates leads to segmentation of the regions and the self-assembly to supramolecular structures. Thermodynamic stability is augmented further through chiral self-assembly of the molecules, and formation of the desired chiral supramolecular structures is achieved. In the present study, we develop anthracene glycosides as efficient synthons that, in aqueous solutions, undergo facile self-assembly and lead to chiral supramolecular structures. Anthracenemethyl O-glycosides, installed with mono- and disaccharides, are studied for their self-assembly properties. Emerging chiral structures follow the configuration of the attached sugar moiety. Monosaccharide d- and l-glycopyranoside-containing derivatives alternate between left- and right-handed chiral structures, respectively. Disaccharide-containing derivatives do not exhibit chirality, even when self-assembly occurred. Photochemical [4π + 4π] cycloaddition occurs in the self-assembled structure in aqueous solution. Cell viability assay using HeLa cells shows above 80% viable cells at a concentration of 50 μM. Bioimaging assays reveal a significant imaging of HeLa cells for anthracenemethyl d-glucopyranoside; bright imaging was observed at the perinuclear region of the cells, suggestive of an active transport of the molecules through the cell membrane. d-Galactopyranoside and l-glucopyranoside-containing derivatives show weak imaging potencies.

Formation of Robust and Adaptive Biopolymers via Non-Covalent Supramolecular Interactions

Biomass-originated materials are the future's next-tier polymers. This work suggests improving mechanical and barrier properties of nature-sourced polymers using non-covalent supramolecular interactions. Polysaccharide chitosan is modified with amino acids via an esterification pathway using a systematic variation of hydrogen bond and aromatic domains (Degrees of substitution 12-49%). These controlled modifications improve stability due to non-covalent interactions, resulting in biopolymers with tailored thermal (decomposition temperature 232-275 °C), mechanical (Young's modulus 540-2667 MPa), and surface properties (roughness 4-40 nm). Chitosan and natural amino acids that are already manufactured at scale are purposely selected. The facile synthesis, controlled properties, stimuli-responsive potential, and inexhaustible origin of the raw materials provide the presented findings with the potential to become the method for the formation of high-performance biodegradable alternatives to petroleum-based polymers that can be used in packaging, food, agriculture, and medicine.

Sulfamic acid grafted to cross-linked chitosan by dendritic units: a bio-based, highly efficient and heterogeneous organocatalyst for green synthesis of 2,3-dihydroquinazoline derivatives

In this work, novel cross-linked chitosan by the G1 dendrimer from condensation of melamine and toluene-2,4-diisocyante terminated by sulfamic acid groups (CS-TDI-Me-TDI-NHSO3H), as a bio-based and heterogeneous acidic organocatalyst, was designed and prepared. Also, the structure of the prepared organocatalyst was characterized by Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) and thermogravimetric analysis/derivative thermogravimetry (TGA/DTA). Subsequently, the catalytic performance of the biobased and dendritic CS-TDI-Me-TDI-NHSO3H, as a multifunctional solid acid, was evaluated for the preparation of 2,3-dihydroquinazoline derivatives through a three-component reaction by following green chemistry principles. Some of the advantages of this new protocol include high to excellent yields and short reaction times as well as easy preparation and remarkable catalyst stability of the introduced acidic organocatalyst. The CS-TDI-Me-TDI-SO3H catalyst can be used for up to five cycles for the preparation of quinazoline derivatives with a slight decrease in its catalytic activity.

Synthesis, Chemical and Biomedical Aspects of the Use of Sulfated Chitosan

This work is devoted to the chemical synthesis of sulfated chitosan and its experimental verification in an animal model of early atherosclerosis. The method of chitosan quaternization with sulfate-containing ingredients resulted in a product with a high content of sulfate groups. Implantation of this product into the fascial-muscular sheath of the main limb artery along the leg and thigh in rabbits led to the extraction of cholesterol from the subintimal region. Simplified methods for the chemical synthesis of quaternized sulfated chitosan and the use of these products in a model of experimental atherosclerosis made it possible to perform a comparative morphological analysis of the vascular walls of the experimental and control limbs under conditions of a long-term high-cholesterol diet. The sulfated chitosan samples after implantation were shown to change the morphological pattern of the intimal and middle membranes of the experimental limb artery. The implantation led to the degradation of soft plaques within 30 days after surgical intervention, which significantly increased collateral blood flow. The implantation of sulfated chitosan into the local area of the atherosclerotic lesions in the artery can regulate the cholesterol content in the vascular wall and destroy soft plaques in the subintimal region.

Polysaccharide-Based Transdermal Drug Delivery

Materials derived from natural plants and animals have great potential for transdermal drug delivery. Polysaccharides are widely derived from marine, herbal, and microbial sources. Compared with synthetic polymers, polysaccharides have the advantages of non-toxicity and biodegradability, ease of modification, biocompatibility, targeting, and antibacterial properties. Currently, polysaccharide-based transdermal drug delivery vehicles, such as hydrogel, film, microneedle (MN), and tissue scaffolds are being developed. The addition of polysaccharides allows these vehicles to exhibit better-swelling properties, mechanical strength, tensile strength, etc. Due to the stratum corneum’s resistance, the transdermal drug delivery system cannot deliver drugs as efficiently as desired. The charge and hydration of polysaccharides allow them to react with the skin and promote drug penetration. In addition, polysaccharide-based nanotechnology enhances drug utilization efficiency. Various diseases are currently treated by polysaccharide-based transdermal drug delivery devices and exhibit promising futures. The most current knowledge on these excellent materials will be thoroughly discussed by reviewing polysaccharide-based transdermal drug delivery strategies.

Biocompatible nanocarriers for passive transdermal delivery of insulin based on self-adjusting N-alkylamidated carboxymethyl cellulose polysaccharides

In this work, we present biocompatible nanocarriers based on modified polysaccharides capable of transporting insulin macromolecules through human skin without any auxiliary techniques. N-Alkylamidated carboxymethyl cellulose (CMC) derivatives CMC-6 and CMC-12 were synthesized and characterized using attenuated total reflectance Fourier transform infrared (ATR-FTIR) and nuclear magnetic resonance (NMR) spectroscopy, gel permeation chromatography and thermogravimetric, calorimetric and microscopic techniques. The prepared modified polysaccharides spontaneously assemble into soft nanoaggregates capable of adjusting to both aqueous and lipid environments. Due to this remarkable self-adjustment ability, CMC-6 and CMC-12 were examined for transdermal delivery of insulin. First, a significant increase in the amount of insulin present in lipid media upon encapsulation in CMC-12 was observed in vitro. Then, ex vivo studies on human skin were conducted. Those studies revealed that the CMC-12 carrier led to an enhancement of transdermal insulin delivery, showing a remarkable 85% insulin permeation. Finally, toxicity studies revealed no alteration in epidermal viability upon treatment and the absence of any skin irritation or amplified cytokine release, verifying the safety of the prepared carriers. Three-dimensional (3D) molecular modeling and conformational dynamics of CMC-6 and CMC-12 polymer chains explained their binding capacities and the ability to transport insulin macromolecules. The presented carriers have the potential to become a biocompatible, safe and feasible platform for the design of effective systems for transdermal delivery of bioactive macromolecules in medicine and cosmetics. In addition, transdermal insulin delivery reduces the pain and infection risk in comparison to injections, which may increase the compliance and glycemic control of diabetic patients.

Biomimetic Citrate-Coated Luminescent Apatite Nanoplatforms for Diclofenac Delivery in Inflammatory Environments

Luminescent nanoparticles are innovative tools for medicine, allowing the imaging of cells and tissues, and, at the same time, carrying and releasing different types of molecules. We explored and compared the loading/release ability of diclofenac (COX-2 antagonist), in both undoped- and luminescent Terbium³⁺ (Tb³⁺)-doped citrate-coated carbonated apatite nanoparticles at different temperatures (25, 37, 40 °C) and pHs (7.4, 5.2). The cytocompatibility was evaluated on two osteosarcoma cell lines and primary human osteoblasts. Biological effects of diclofenac-loaded-nanoparticles were monitored in an in vitro osteoblast’s cytokine–induced inflammation model by evaluating COX-2 mRNA expression and production of PGE₂. Adsorption isotherms fitted the multilayer Langmuir-Freundlich model. The maximum adsorbed amounts at 37 °C were higher than at 25 °C, and particularly when using the Tb³⁺ -doped particles. Diclofenac-release efficiencies were higher at pH 5.2, a condition simulating a local inflammation. The luminescence properties of diclofenac-loaded Tb³⁺ -doped particles were affected by pH, being the relative luminescence intensity higher at pH 5.2 and the luminescence lifetime higher at pH 7.4, but not influenced either by the temperature or by the diclofenac-loaded amount. Both undoped and Tb³⁺-doped nanoparticles were cytocompatible. In addition, diclofenac release increased COX-2 mRNA expression and decreased PGE₂ production in an in vitro inflammation model. These findings evidence the potential of these nanoparticles for osteo-localized delivery of anti-inflammatory drugs and the possibility to localize the inflammation, characterized by a decrease in pH, by changes in luminescence.

Quaternized chitosan as a biopolymer sanitizer for leafy vegetables: synthesis, characteristics, and traditional vs. dry nano-aerosol applications

A series of quaternary dimethyl-(alkyl)-ammonium chitosan derivatives (QACs) was synthesized and studied for physicochemical properties and bioactivity. The QACs tended to spontaneously self-assembly into nanoaggregates. Antimicrobial activity was examined in vitro on Gram-negative Escherichia coli (E. coli) and Gram-positive Listeria innocua (L. innocua) bacteria as well as phytopathogenic fungus Botrytis cinerea. The hexyl chain-substituted QAC-6 demonstrated the highest potency causing 3.0- and 4.5-log CFU mL-1 reduction of E. coli and L. innocua, respectively. QAC-6 was tested for antimicrobial activity on stainless steel coupons and fresh spinach leaves. A traditional 'wet' application (spray) and dry Engineered Water Nanostructure (EWNS) approach were used for spinach decontamination. With both approaches, significant reduction of microbial load on the treated produce was achieved. The wet application showed a greater reduction of microbial load, while the advantages of EWNS were reaching the antimicrobial effect with miniscule dose of active agent leaving treated surface visibly dry.

Characterization of the selective binding of modified chitosan nanoparticles to Gram-negative bacteria strains

Chitosan is a nature-sourced polysaccharide widely used in numerous applications. The antibacterial potential of chitosan has attracted researchers to further develop and utilize this polymer for the formation of biocompatible antibacterial agents for both the food and healthcare industries. The tested hypothesis in this study is that modified N-alkylaminated chitosan nanoparticles (CNPs) have selective binding properties to Gram-negative bacteria strains that result in bacterial aggregation. Various bacterial strains were tested of five Gram-negative bacteria including Erwinia carotovora, Escherichia coli, Pseudomonas aeruginosa, Salmonella, and Serratia marcescens, as well as three Gram-positive bacteria strains including Bacillus licheniformis, Bacillus megaterium, and Bacillus subtilis. The fluorescence microscopy characterization showed that the presence of CNPs caused the aggregation of Escherichia coli bacteria cells, where modified CNPs with a shorter chain length of the substituent caused a higher aggregation effect. Moreover, it was found that the CNPs exhibited a selective binding behavior to Gram-negative as compared to Gram-positive bacteria strains, mainly to Escherichia coli and Salmonella. Also, the scanning electron microscopy characterization showed that CNPs exhibited selective binding to Gram-negative bacteria, which was especially understood when both Gram-negative and Gram-positive bacteria strains were within the same sample. In addition, the bacterial viability assay suggests that CNPs with a lower degree of substitution have a higher inhibitory effect on bacterial growth. CNPs with longer side chains had a less inhibitory effect on the bacterial growth of Gram-negative strains, where a concentration-dependent response pattern was only seen for the cases of Gram-negative strains, and not for the case of Gram-positive strain. To conclude, the further understanding of the selective binding of CNPs to Gram-negative bacteria strains may produce new opportunities for the discovery and characterization of effective antibacterial agents.

Stimuli-Free Transcuticular Delivery of Zn Microelement Using Biopolymeric Nanovehicles: Experimental, Theoretical, and In Planta Studies

This paper reports one-step synthesis of polysaccharide-based nanovehicles, capable of transporting ionic zinc via plant cuticle without auxiliary stimulation. Delivery of highly hydrophilic nutritive microelements via the hydrophobic cuticle of plant foliage is one of the major challenges in modern agriculture. In traditional nutrition via roots, up to 80% of microelements permeate to soil and get wasted; therefore, foliar treatment is an environmentally and economically preferable alternative. Carboxymethyl cellulose (CMC) was modified to amphiphilic N-octylamide-derivative (CMC-8), which spontaneously self-assemble to nanovehicles. It was found that hydrophobic substituents endow a biopolymer with unexpected affinity toward a hydrophilic payload. CMC-8 nanovehicles effectively encapsulated ionic zinc (ZnSO₄) and delivered it upon foliar application to pepper (Capsicum annuum) and tomato (Solanum lycopersicum) plants. Zinc uptake and translocation in plants were monitored by SEM-EDS and fluorescence microscopic methods. In planta monitoring of the carrier was done by labeling nanovehicles with fluorescent carbon dots. Three-dimensional (3-D) structural modeling and conformational dynamics explained the CMC-8 self-assembly mechanism and zinc coordination phenomenon upon introduction of hydrophobic substituents.

Novel Copper Nanoparticles Intercalated Polyurethane Heparin/Poly-L-Lysine Chelates Coated Stents: Viability Study for Coronary Vascular Cells and Aneurysms Treatments

Continuous delayed endothelium regeneration and continues thrombosis development designate a task for coronary artery stent rehabilitation. To progress the direct vascular cell behavior, aneurysms treatments and compatibility of cardiovascular implants novel copper intercalated polyurethane heparin/poly-L-lysine chelates treated stent has established in this report. The functional group modifications, structural characteristics, and stability of the chelates have investigated for polyurethane heparin: poly-L-lysine, copper intercalated polyurethane heparin/poly-L-lysine coated stents. The FTIR results showed the copper intercalation at 446 cmr and the Cu 2s peak at 932 eV from XPS also indicated that the successful coating of copper, polyurethane heparin, poly-L-lysine. The relative surface geomorphology of the chelates displayed the uniform Cu coating consisting of multilayer poly-L-lysine on the substrate. The stability and biocompatibility studies indicated the significantly enhanced performance with clot the APTT and TT periods as clotting and cell proliferation assessments. This type of composite proposes a stage on a stent external area for discerning track of vascular cell performance and aneurysms treatments with low side effects.