Label-Free Detection of Staphylococcus aureus Based on Bacteria-Imprinted Polymer and Turn-on Fluorescence Probes

Rationally designed protein A surface molecularly imprinted magnetic nanoparticles for the capture and detection of Staphylococcus aureus

Staphylococcus aureus (S. aureus), a commensal organism found on the human skin, is commonly associated with nosocomial infections and exhibits virulence mediated by toxins and resistance to antibiotics. The global threat of antibiotic resistance has necessitated antimicrobial stewardship to improve the safe and appropriate use of antimicrobials; hence, there is an urgent demand for the advanced, cost-effective, and rapid detection of specific bacteria. In this regard, we aimed to selectively detect S. aureus using surface molecularly imprinted magnetic nanoparticles templated with a well-known biomarker protein A, specific to S. aureus. Herein, a highly selective surface molecularly imprinted polymeric thin layer was created on ∼250 nm magnetic nanoparticles (MNPs) through the immobilization of protein A to aldehyde functionalized MNPs, followed by monomer polymerization and template washing. This study employs the rational selection of monomers based on their computationally predicted binding affinity to protein A at multiple surface residues. The resulting MIPs from rationally selected monomer combinations demonstrated an imprinting factor as high as ∼5. Selectivity studies revealed MIPs with four-fold higher binding capacity (BC) to protein A than other non-target proteins, such as lysozyme and serum albumin. In addition, it showed significant binding to S. aureus, whereas negligible binding to other non-specific Gram-negative, i.e. Escherichia coli (E. coli), Pseudomonas aeruginosa (P. aeruginosa), and Gram-positive, i.e. Bacillus subtilis (B. subtilis), bacteria. This MIP was employed for the capture and specific detection of fluorescently labeled S. aureus. Quantitative detection was performed using a conventional plate counting technique in a linear detection range of 101-107 bacterial cells. Remarkably, the MIPs also exhibited approximately 100% cell recovery from milk samples spiked with S. aureus (106 CFU mL-1), underscoring its potential as a robust tool for sensitive and accurate bacterial detection in dairy products. The developed MIP exhibiting high affinity and selective binding to protein A finds its potential applications in the magnetic capture and selective detection of protein A as well as S. aureus infections and contaminations.

An electrochemical biosensor for Staphylococcus aureus detection based on a multilevel surface 3D micro/nanostructure

Detection of pathogens is one of the key concerns for hospitals, the food industry, water suppliers, or other environmental engineering practices because pathogens can cause a wide range of infectious risks. Staphylococcus aureus (S. aureus) is one of the most common pathogens that are hazardous to human health and its existence is an important index to the safety of food, environmental sanitation, or medical products. In this study, we prepared an electrode with designed surface multilevel 3D micro/nano protrusions for facile and efficient S. aureus detection. The existence of these multilevel protrusions enhanced the adsorption of S. aureus. Hence, the detection limit could be as low as 10 CFU mL-1. Furthermore, the electrode was also successfully used to detect S. aureus in actual samples, such as milk and artificial human tissue fluid. It was found that the recovery of the reported approach showed no significant difference from that of the traditional plate count method. However, compared with the plate count method, the detection process of our approach is much more time-saving and easy-operating. These advantages of the approach we report, such as high sensitivity, reliability, quickness, and user-friendliness, make it a potential platform for detecting S. aureus in relation to the food industry and clinical diagnosis.

Gold Nanoparticle-Based Colorimetric Biosensing for Foodborne Pathogen Detection

Ensuring safe high-quality food is an ongoing priority, yet consumers face heightened risk from foodborne pathogens due to extended supply chains and climate change in the food industry. Nanomaterial-based assays are popular and have recently been developed to ensure food safety and high quality. This review discusses strategies for utilizing gold nanoparticles in colorimetric biosensors. The visible-signal biosensor proves to be a potent sensing technique for directly measuring targets related to foodborne pathogens in the field of food analysis. Among visible-signal biosensors, the localized surface plasmon resonance (LSPR) biosensor has garnered increasing attention and experienced rapid development in recent years. This review succinctly introduces the origin of LSPR theory, providing detailed insights into its fundamental principles. Additionally, this review delves into the application of nanotechnology for the implementation of the LSPR biosensor, exploring methods for utilizing gold nanoparticles and elucidating the factors that influence the generation of visible signals. Several emerging technologies aimed at simple and rapid immunoassays for onsite applications have been introduced in the food industry. In the foreseeable future, field-friendly colorimetric biosensors could be adopted in food monitoring systems. The onsite and real-time detection of possible contaminants and biological substances in food and water is essential to ensure human health and safety.

Recent Advances in Optical Sensing for the Detection of Microbial Contaminants

Microbial contaminants are responsible for several infectious diseases, and they have been introduced as important potential food- and water-borne risk factors. They become a global burden due to their health and safety threats. In addition, their tendency to undergo mutations that result in antimicrobial resistance makes them difficult to treat. In this respect, rapid and reliable detection of microbial contaminants carries great significance, and this research area is explored as a rich subject within a dynamic state. Optical sensing serving as analytical devices enables simple usage, low-cost, rapid, and sensitive detection with the advantage of their miniaturization. From the point of view of microbial contaminants, on-site detection plays a crucial role, and portable, easy-applicable, and effective point-of-care (POC) devices offer high specificity and sensitivity. They serve as advanced on-site detection tools and are pioneers in next-generation sensing platforms. In this review, recent trends and advances in optical sensing to detect microbial contaminants were mainly discussed. The most innovative and popular optical sensing approaches were highlighted, and different optical sensing methodologies were explained by emphasizing their advantages and limitations. Consequently, the challenges and future perspectives were considered.

Specific and quantitative detection of bacteria based on surface cell imprinted SERS mapping platform

Non-specificity and poor quantitative ability are the main challenges in surface-enhanced Raman scattering (SERS) technique, especially for the detection of bacteria in real samples. In this study, we presented a surface cell imprinted SERS mapping platform which is competent for the specific and quantitative detection of bacteria. The platform based on the fabrication of a surface cell imprinted substrate (SCIS) by which Escherichia coli (E. coli) can be captured and labelled by SERS tags which produces strong characteristic signal to indicate the capture of targets. We highlighted the specificity of this platform in the detection of E. coli, by comparing the performances toward Salmonella paratyphoid A, Bacillus subtilis, Enterococcus faecalis and Staphylococcus aureus. Upon integrating with SERS mapping technique, the platform displayed good quantitative ability toward E. coli with a wide linear range from 10² to 10⁸ CFU/mL and a low detection limit of ∼1.35 CFU/mL. Moreover, this novel SERS analysis platform was proved to be effective for E. coli detection in real probiotic beverage and chicken breast meat samples. By fabricating different SCISs, this platform can be replicated for the detection of other bacteria, which provides a promising application for real sample testing.

Emerging Bioanalytical Devices and Platforms for Rapid Detection of Pathogens in Environmental Samples

The development of robust bioanalytical devices and biosensors for infectious pathogens is progressing well with the advent of new materials, concepts, and technology. The progress is also stepping towards developing high throughput screening technologies that can quickly identify, differentiate, and determine the concentration of harmful pathogens, facilitating the decision-making process for their elimination and therapeutic interventions in large-scale operations. Recently, much effort has been focused on upgrading these analytical devices to an intelligent technological platform by integrating them with modern communication systems, such as the internet of things (IoT) and machine learning (ML), to expand their application horizon. This review outlines the recent development and applications of bioanalytical devices and biosensors to detect pathogenic microbes in environmental samples. First, the nature of the recent outbreaks of pathogenic microbes such as foodborne, waterborne, and airborne pathogens and microbial toxins are discussed to understand the severity of the problems. Next, the discussion focuses on the detection systems chronologically, starting with the conventional methods, advanced techniques, and emerging technologies, such as biosensors and other portable devices and detection platforms for pathogens. Finally, the progress on multiplex assays, wearable devices, and integration of smartphone technologies to facilitate pathogen detection systems for wider applications are highlighted.

A concise detection strategy of Staphylococcus aureus using N-Succinyl-Chitosan-dopped bacteria-imprinted composite film and AIE fluorescence sensor

Staphylococcus aureus is one of the major foodborne pathogens. Efficient detection and isolation of Staphylococcus aureus from complex samples are crucial. Herein, we report a concise strategy to detect of Staphylococcus aureus with high sensitivity and specificity, based on N-Succinyl-Chitosan doping bacteria-imprinted composite film and aggregation-induced emission (AIE)-featuring fluorescence sensor. The good shaping and mechanical properties of polydimethylsiloxane provide a specific recognition site suitable for Staphylococcus aureus. For the first time, chitosan derivatives is combined with polydimethylsiloxane to prepare a two-component composite film, which possesses a remarkable absorption performance of Staphylococcus aureus using the natural excellent absorption property of chitosan. The positive charged AIE-featuring Au(I)-disulfide nanoparticles realized the quantitative characterization of Staphylococcus aureus without cooperation with bio-recognition elements. To conclude, this study provides new possibilities for the manufacture of highly efficient bacterial separators with superior performance and facilitates the application of unlabeled nanoparticles in quantitative analysis.

Biosensors and Point-of-Care Devices for Bacterial Detection: Rapid Diagnostics Informing Antibiotic Therapy

With an exponential rise in antimicrobial resistance and stagnant antibiotic development pipeline, there is, more than ever, a crucial need to optimize current infection therapy approaches. One of the most important stages in this process requires rapid and effective identification of pathogenic bacteria responsible for diseases. Current gold standard techniques of bacterial detection include culture methods, polymerase chain reactions, and immunoassays. However, their use is fraught with downsides with high turnaround time and low accuracy being the most prominent. This imposes great limitations on their eventual application as point-of-care devices. Over time, innovative detection techniques have been proposed and developed to curb these drawbacks. In this review, a systematic summary of a range of biosensing platforms is provided with a strong focus on technologies conferring high detection sensitivity and specificity. A thorough analysis is performed and the benefits and drawbacks of each type of biosensor are highlighted, the factors influencing their potential as point-of-care devices are discussed, and the authors' insights for their translation from proof-of-concept systems into commercial medical devices are provided.

Naked-eye sensing and target-guiding treatment of bacterial infection using pH-tunable multicolor luminescent lanthanide-based hydrogel

In this work, a pH-tunable multicolor luminescent lanthanide-based hydrogel (CS/DEX/CP) was prepared based on lanthanide coordination polymer (CP), dextran aldehyde (DEX) and chitosan (CS). The CP was obtained by the self-assembly of guanosine acid (GMP), ciprofloxacin (CIP), Eu³⁺, and Tb³⁺. As-prepared CS/DEX/CP hydrogel could emit blue, green, and red luminescence of CIP, Tb³⁺, and Eu³⁺, respectively. It was also found that the luminescence of CS/DEX/CP hydrogel exhibited visual color change in the pH range of 5.5 to 8. Such pH-sensitive hydrogel was multicolor-responsive to protons produced by bacterial growth, therefore, it could provide early warning of bacterial infection by naked-eye. In addition, the increased acidity resulted in not only the degradation of acid-labile Schiff base linkages between DEX and CS, but also the fracture of coordination between CIP and lanthanide ions. As a result, the released CIP and CS showed significantly antibacterial activity against both S. aureus and E. coli.