Paper-Based Analytical Device for the On-Site Detection of Nerve Agents

UiO-66-NH2 initiated cascade reaction: Constructing a ratiometric fluorescence sensor for ultrasensitive detection of nerve agent simulant

BACKGROUND

Highly toxic organophosphorus nerve agents often exist in the form of gas in the environment and can damage human neuroregulatory system by inhibiting the activity of acetylcholinesterase (AChE). However, fluorescent probes based on small organic molecules bring a secondary burden to environment, and their sensitivity and specificity for sarin simulant diethyl chlorophosphate (DCP) detection are unsatisfactory. Nanozyme cascade systems with signal amplification can be used for highly sensitive identification of analytes, but are rarely used in ratiometric analysis of DCP. Combination of enzyme cascades and ratiometric fluorescence ensures the accuracy and sensitivity of the output signal.

RESULTS

We prepared a self-assembled nanohybrid (Ag-AuNCs@UiO-66-NH2) by metal-organic framework material and gold nanoclusters. On the one hand, UiO-66-NH2 with enzyme-like activity was used to hydrolyze DCP into diethyl phosphate (DEP) and chloridion (Cl-). Cl- hindered aggregation-induced enhanced emission (AIEE) of AuNCs by binding with Ag+ and decreased the fluorescence of AuNCs. On the other hand, ligand metal charge transfer effect (LMCT) of UiO-66-NH2 was blocked by DCP to enhance the fluorescence of UiO-66-NH2. Combining ratiometric analysis and nanozyme cascade reaction, an ultra-sensitive fluorescence sensor for detecting DCP was constructed, and ensured the accuracy of experimental results. In addition, Ag-AuNCs@UiO-66-NH2 was embedded into the agarose hydrogel substrate, the resulting agarose hydrogel film allowed quantitative assessment of DCP vapor and high sensitivity was demonstrated (detection limit as low as 1.02 ppb).

SIGNIFICANCE

A strategy combining enzyme cascade with ratiometric fluorescence was proposed, which improved the accuracy and sensitivity of the analysis results. The soft-solid platform based on agarose hydrogel film was constructed to realize the quantitative monitoring of sarin simulant gas. The LOD value obtained in this work is much lower than the immediately life-threatening or health threatening concentration of sarin.

Paper-based uric acid assay in whole blood samples by Zn2+ protein precipitation and enzyme-free colorimetric detection

Uric acid (UA) is an important biomarker, as a high concentration in blood can lead to gout and further renal syndrome. Although several point-of-care testing (POCT) devices have been reported to detect UA, there are some limitations such as the requirement for uricase and the complicated pretreatment of serum/plasma samples, which restricts their use at home or in undeveloped areas. In this work, we developed an approach by applying Zn2+ to precipitate proteins and cells in whole blood to avoid interference with the chromogenic reaction. We used carboxymethylcellulose (CMC) to immobilize tetramethylbenzidine (TMB) on a nitrocellulose membrane for colorimetric detection. Using the oxidization properties of H2O2, which turns TMB into oxidized tetramethylbenzidine (TMBox) in the presence of catalyst gold nanoparticles (AuNPs), we successfully constructed an enzyme-free paper-based POCT device using the reduction reaction of UA and TMBox for simple, speedy, and cheap colorimetric detection of UA, achieving a detection time of 8 min, a linear range of 0-150 μg/mL, and an LOD of 25.79 μg/mL. The UA concentration in whole blood samples was further measured and correlated well with the clinical value (R2 = 0.8212). Thus, the proposed assay has the potential for POCT diagnosis, monitoring, and prognosis of diseases related to UA.

Detection of sulfur mustard simulant by trisaryl phosphoric triamide-based resin using a quartz crystal microbalance sensor

Chemical warfare agents (CWAs) pose a persistent threat to human safety, and bis(2-chloroethyl) sulfide, or sulfur mustard (SM) is one of the most dangerous substances and is able to cause serious harm. Detecting SM gas is vital, but current methods have high-temperature requirements and limited selectivity, mainly because of the lack of CWA receptor development, and this makes them challenging to use. To address this issue, we present a trisaryl phosphoric triamide-based resin receptor that preferentially interacts with a SM simulant 2-chloroethyl ethyl sulfide (2-CEES) through dipole interactions. The receptor was synthesized through a facile process using an amine and a triethyl phosphate and the properties of its coating were enhanced using epoxy chemistry. The receptor's superior triamide structure was evaluated using a quartz crystal microbalance and reactivity was confirmed by observing the variations in reactivity according to the number of phosphoramides. The receptor showed better reactivity to 2-CEES vapor than to the known poly(epichlorohydrin) and showed selectivity to other volatile organic compounds. Moreover, its durability was evident even 30 days post-coating. The applicability of this receptor extends to array sensors, sound acoustic wave sensors, and chemo-resistive and chemo-capacitive sensors, and it promises advances in chemical warfare agent detection.

Fabrication of paper-based analytical devices by a laminating method with thermal ink ribbons, sticky notes, and office appliances

A stencil printing method utilizing sticky notes, a thermal transfer ink ribbon, and office appliances for paper-based analytical device (PAD) fabrication was proposed. A sticky note was attached to a filter paper, and a mask pattern was cut using a cutting machine. A commercially available thermal ink ribbon was then placed over the mask and laminated. We have characterized the fabricated devices. This approach could be used for the fast and mass prototyping of PADs using simple office appliances with no need for a wax printer.

A novel approach for on-site screening of organophosphorus nerve agents based on DTNB modified AgNPs using surface-enhanced Raman spectrometry

Organophosphorus nerve agents (OPNAs), such as Sarin (GB), Tabun (GA), Soman (GD) and VX, would cause tremendous harm in military and terrorist attacks, and thus the development of simple methods for the rapid and efficient detection of these hazardous substances is of great necessity. Herein, we present a novel approach for the facile, rapid and sensitive detection of real OPNAs. The detection substrate is fabricated using functionalized silver nanoparticles (AgNPs) immobilized with acetylcholinesterase (AChE) and 5,5'-dithiobis-(2-nitrobenzoic acid) (DTNB). In the absence of OPs, AChE catalyzes the hydrolysis of acetylthiocholine (ATCh) to form thiocholine (TCh), which continues to interact quickly with DTNB to produce a very sensitive Raman probing molecule, TNB. The inhibition of the activity of AChE by OPs could induce an obvious decrease of characteristic Raman peaks of 5-thio-2-nitrobenzoic acid (TNB) at 1335 cm^-1. The introduction of DTNB as an enzyme activity indicator significantly improves the detection sensitivity with distinct characteristic Raman peaks. The LOD of GD, which is one of the most easily aged OPNAs, could reach 0.1 nM due to its strongest inhibition of AChE. Moreover, various OPNAs exhibit different SERS intensities due to their different inhibition capacities of AChE. Hence, the new strategy has great potential in public security early warning and environmental analysis.

Colorimetric analysis based on solid-phase extraction with sedimentable dispersed particulates: demonstration of concept and application for on-site environmental water analysis

A novel simple and functional colorimetric methodology for on-site environmental water analysis was proposed. This method combines coloration of the analyte and extraction of the colored species on dispersed particulates during their sedimentation in the same container. The whole analysis can be performed within 15 min by comprising the addition of 1 mL of sample solution into a 1.5-mL microtube containing the powders of coloring reagents and the sedimentable fine particulates as an adsorbent. The analyte is determined by comparing the sediment color with the standard color by visual inspection or the color information of the photo image. The potential of this methodology was demonstrated through developing colorimetry for Fe²⁺ with o-phenanthroline, NO₂^- by azo-dye formation, HCHO by the MBTH method, and PO₄^3- by the 4-aminoantipyrine method based on the enzyme reactions. The material, size, amount of the adsorbent particles, and other conditions were optimized for each analytes. The advantages of the methodology were as follows: high sensitivity, easy controllability of the sensitivity over the wide range by the amount, size, and material of the particulates, lower interference from the colored matrix components due to obtaining the color data from not the aqueous phase but the sedimented particulates, and acceleration of the color development rate by the particulates as seen in NO₂^- determination as consequence shorten the operation time. A simple device equipped with twin cells was proposed for on-site analysis which contains two successive different coloring operations. The developed methods were successfully applied to the environmental water samples with the good agreement of the results with those by the usual instrumental methods.

Luciferin Synthesis and Pesticide Detection by Luminescence Enzymatic Cascades

D-Luciferin (D-LH₂ ), a substrate of firefly luciferase (Fluc), is important for a wide range of bioluminescence applications. This work reports a new and green method using enzymatic reactions (HELP, HadA Enzyme for Luciferin Preparation) to convert 19 phenolic derivatives to 8 D-LH₂ analogues with ≈51 % yield. The method can synthesize the novel 5'-methyl-D-LH₂ and 4',5'-dimethyl-D-LH₂ , which have never been synthesized or found in nature. 5'-Methyl-D-LH₂ emits brighter and longer wavelength light than the D-LH₂ . Using HELP, we further developed LUMOS (Luminescence Measurement of Organophosphate and Derivatives) technology for in situ detection of organophosphate pesticides (OPs) including parathion, methyl parathion, EPN, profenofos, and fenitrothion by coupling the reactions of OPs hydrolase and Fluc. The LUMOS technology can detect these OPs at parts per trillion (ppt) levels. The method can directly detect OPs in food and biological samples without requiring sample pretreatment.