Green Wood Adhesives from One-Pot Coacervation of Folic Acid and Branched Poly(ethylene imine)

Effects of Beech Wood Surface Treatment with Polyethylenimine Solution Prior to Finishing with Water-Based Coating

The surfaces of beech wood samples were treated with polyethylenimine (PEI) solutions at three different concentrations-0.5%, 1% and 2%-and two molecular weights-low molecular weight (LMW) and high molecular weight (HMW). The effects of PEI surface treatment of wood were characterized by FT-IR spectroscopy, the penetration depth of PEI (EPI fluorescence spectroscopy), the bonding position of PEI (by SEM), the wetting and surface energy, and the water uptake. After PEI treatment, the samples were coated with a water-based transparent acrylic coating (WTAC). The dry film thickness, the penetration depth of the coating, the adhesion strength and the surface roughness of the coated wood surface were evaluated. EPI fluorescence and SEM micrographs showed that PEI HMW chains were deposited on the surface, in contrast to PEI LMW, which penetrates deeper into layers of the wood cells. Treatment with a 1% PEI HMW solution resulted in a 72% reduction in water uptake of the wood (compared to untreated samples after 5 min of applying water droplets to the surface) and a 23.2% reduction in surface energy (compared to untreated samples) while maintaining the adhesion strength of the applied WTAC. The lower water uptake of the treated wood samples reduced the roughness of the coated surface, which is particularly important when the wood surface is finished with water-based coatings.

Effect of the Molecular Weight of Polyelectrolyte and Surfactant Chain Length on the Solid-Phase Molecular Self-Assembly

Solid-phase molecular self-assembly (SPMSA) is emerging as an efficient approach, leading to scale-span self-assembled supramolecular films. With SPMSA, freestanding macroscopic supramolecular films can be formed upon mechanically pressing the precipitates formed with polyelectrolytes and oppositely charged surfactants. Herein, we report that the film formation ability and the mechanical strength of the resultant film depend highly on the surfactant chain lengths and the molecular weight of polyelectrolytes. A coarse-grained molecular dynamics study revealed that the longer surfactant chains are beneficial for the ordered assembly of surfactant bilayers in the film, whereas the larger molecular weight of PE favors the enhanced mechanical strength of the film by promoting the long-range order of the surfactant bilayers. The current results disclosed the physical insight of the surfactant chain length and the molecular weight of polyelectrolytes into the film structure and mechanical strength, which is of practical importance in guiding the creation of SPMSA materials.

Unprecedented Nonflammable Organic Adhesives Leading to Fireproof Wood Products

We report an excellent water-based inflammable organic wood adhesive that is able to protect wood products from burning by generating inflammable gases, a porous thick char layer, and radicals that consume the oxygen and hydrogen radicals required in the burning process. The organic adhesive is obtained by the formation of hard supramolecular phases composed of high-density flame-retardant N and P elements through hydrogen bonding and acid-base interaction between the phytic acid and branched polyethylenimine (b-PEI). The phytic acid molecules are packed densely in the framework of the flexible b-PEI so that a porous char layer that would reduce heat conduction can be formed as the adhesive is heated. Together with the formation of inflammable NH₃ gas to dilute the oxygen concentration and a PO^• radical to capture the H^• and O^• radicals, the adhesive-treated wood product displays an extremely high limited oxygen index of 100% and a negligible heat release rate, total heat release, and total smoke release. The current flame-retardant water-based organic adhesive is so far the best adhesive for green and safe wood products from burning.

Physical Insight into the Conditions Required in the Solid-Phase Molecular Self-Assembly of SDS Revealed by Coarse-Grained Molecular Dynamics Simulation

Molecular self-assembled materials have attracted considerable interest in recent years. As part of the efforts to overcome the shortcoming that the solution-based methods were hardly applicable in preparing bulk macroscopic molecular self-assemblies, Yan [ CCS Chem. 2020, 2, 98-106] developed a strategy of solid-phase molecular self-assembly (SPMSA) that allows scaling up the generation of massive supramolecular films. It is highly desired to understand the physical insight into the SPMSA at a molecular level. Here, in combination with the experimental study, we report molecular dynamics (MD) simulations on the SPMSA of the surfactant sodium dodecyl sulfate (SDS) using a coarse-grained method with the Martini force field model. The MD simulations clearly manifest that a small amount of water is required to endow the SDS molecules with sufficient mobility to self-assemble, and the smaller size of the preassembled SDS particles favors their further fusion into mesophases by reducing the total surface Gibbs free energy, while the smaller interparticle distance decreases the time for the particle fusion. The simulation results agree well with the conditions required in the experiment, confirming that SMPSA is a free-energy-favored process leading to bulk self-assembled materials.