UV-Crosslinked Electrospun Zein/PEO Fibroporous Membranes for Wound Dressing

Fabrication of l-proline enriched alginate dialdehyde-gelatin hydrogel thin films for efficient wound healing applications

Hydrogel-based wound management systems represent a promising avenue in tissue engineering for restoring and preserving the normal functionality of damaged tissues. Incorporating active components into hydrogel matrices enhances their suitability for biomedical applications. In this study, we investigated the integration of l-proline, a nonessential imino acid with largely unexplored roles in living systems, into alginate dialdehyde-gelatin hydrogel for wound healing purposes. Physicochemical properties of the resulting hydrogel film, termed ADAGLP, were meticulously evaluated, including wound healing efficacy in vitro and anti-biofilm activity against Gram-positive and Gram-negative microorganisms. Fourier-transform infrared spectroscopy (FTIR) analysis provided insights into the interaction between l-proline and ADAG. Films incorporating 0.5% l-proline were selected for comprehensive investigation. Comparative analysis revealed prolonged gelation time and increased water holding capacity of ADAGLP compared to ADAG films. Moreover, ADAGLP exhibited a significantly higher degradation rate (69.5 ± 3.2%) compared to ADAG (35.2 ± 1.6%). Remarkably, ADAGLP demonstrated cyto-compatibility, non-toxicity, and facilitated migration to the scratch area in vitro conditions. Notably, it exhibited potent anti-biofilm properties. Our findings suggest that ADAGLP hydrogel holds promise as a biomaterial for wound care, offering prolonged drug delivery and maintaining optimal moisture levels in wound areas. The incorporation of l-proline in the wound microenvironment may contribute to enhanced tissue remodeling, by inhibiting biofilm formation, further highlighting the potential of this hydrogel system in wound healing applications.

Aligned Fibroporous Matrix Generated from a Silver Ion and Graphene Oxide-Incorporated Ethylene Vinyl Alcohol Copolymer as a Potential Biomaterial for Peripheral Nerve Repair

Developing an ideal nerve conduit for proper nerve regeneration still faces several challenges. The attempts to fabricate aligned substrates for neuronal growth have enhanced the hope of successful nerve regeneration. In this wok, we have attempted to generate an electrospun matrix with aligned fibers from a silver and graphene oxide-incorporated ethylene vinyl alcohol copolymer (EVAL). The presence of silver was analyzed using UV-visible spectra, XPS spectra, and ICP. Raman spectra and FTIR spectra confirmed the presence of GO. The complexation of Ag+ with - OH of EVAL enabled the generation of aligned fibers. The fiber diameter (>1 μm) provided sufficient space for forming focal adhesion by the neurites and filopodia of N2a and C6 cells, respectively. The fiber diameter enabled the neurites and filopodia of the cells to align on the fibers. The incorporation of GO has contributed to the cell-material interactions. The morphological and mechanical properties of fibers obtained in the study ensure that the EVAL-Ag-GO-0.01 matrix is a potential substrate for developing a nerve guidance conduit/nerve wrap (NGC/W).

Zein and 3-Aminophenyl Boronic Acid Conjugated Polyvinylpyrrolidone Polymer Blend: Electrospinning, Characterization, and Mucoadhesive Drug Delivery

The era of mucoadhesive polymers has advanced to the next generation, focusing on targeted adhesion of chemical functional groups with mucosa. This work aims to develop boronic acid functionalized polymers, which could facilitate reversible binding with the mucin in the mucosa. Pendant groups of boronic acid were conjugated on the chains of polyvinylpyrrolidone (PVP) via C═N bonding. The evidence from FTIR spectroscopy, XPS analysis, and UV spectroscopy has been used for the confirmation of the chemical conjugation of 3-aminophenyl boronic acid (APBA) to PVP. Boronate ester formation is a pH-dependent process. High pKa values of APBA preferably cause the binding of trigonal-shaped boronic acid with sialic acid groups of mucin. Boronic acid moieties additionally benefited in mucoadhesion in comparison to PVP alone, which is a result of the formation of a five-membered boronate ester complex. The presence of boronic acid moieties enhanced the force of adhesion on porcine buccal mucosal tissue from 13.12 ± 1.52 to 19.04 ± 1.97 g force. Specific binding of the polymer to the mucosal surface caused prolonged adhesion of the polymer to the mucosal surface. A polymer blend of boronic acid functionalized PVP and zein has been explored for its potential for mucoadhesive delivery of propranolol hydrochloride.

Rutin-loaded zein gel as a green biocompatible formulation for wound healing application

Wound healing is a challenging clinical problem and efficient wound management is essential to prevent infection. This is best done by utilizing biocompatible materials in order to complete the healing in a rapid manner, with functional and esthetic outcomes. In this context, the zein protein fulfills the criteria of the ideal wound dressing which include non-toxicity and non-inflammatory stimulation. Zein gels containing rutin were prepared without any chemical refinement or addition of gelling agents in order to obtain a natural formulation characterized by antioxidant and anti-inflammatory properties to be proposed for the treatment of burns and sores. In vitro scratch assay showed that the proposed gel formulations promoted cell migration and a rapid gap closure within 24 h (~90 %). In addition, the in vivo activities of rutin-loaded zein gel showed a greater therapeutic efficacy in Wistar rats, with a decrease of the wound area of about 90 % at day 10 with respect to the free form of the bioactive and to DuoDERM®. The evaluation of various markers (TNF-α, IL-1β, IL-6, IL-10) confirmed the anti-inflammatory effect of the proposed formulation. The results illustrate the feasibility of exploiting the peculiar features of rutin-loaded zein gels for wound-healing purposes.

Design and evaluation of propranolol hydrochloride loaded thiolated Zein/PEO electrospun fibrous matrix for transmucosal drug delivery

Thiolated polymers have garnered wide attention from researchers on mucoadhesive drug delivery. This work explores the thiolation of zein protein using cysteine amino acid via the EDC crosslinker. The optimization of thiolation and purification have been done and confirmed using Ellman's assay and Raman spectra. The thiolated Zein/PEO polymer blend has been appraised for electrospinning to fabricate fibrous matrices. The extent of thiol modification augmented the mechanical properties and adhesion in rabbit intestinal mucosa. In vitro cytotoxicity evaluations such as direct contact assay, MTT assay, and live dead assay performed in RPMI 2650 cells corroborated the non-cytotoxicity of the fabricated matrices with and without propranolol hydrochloride (PL). Detailed drug release studies were conducted in PBS. Drug release in PBS followed the Korsmeyer Peppas model of release. On treating RPMI 2650 cells with the matrix, F-actin and adherens junctional proteins retained integrity, and consequently, drug permeation would proceed through the transcellular transport mechanism. Transepithelial electrical resistance (TEER) measurement of the RPMI 2650 cell monolayer also supported the transcellular transport mechanism. Ex vivo permeation study through porcine buccal mucosa showed 41.26 ± 0.56% PL permeation within 24 h of study. It validated the competence of the electrospun thiolated Zein/PEO matrix for transmucosal drug delivery.

Electrospun Mucoadhesive Zein/PVP Fibroporous Membrane for Transepithelial Delivery of Propranolol Hydrochloride

Mucoadhesive drug delivery systems have been extensively studied to effectively reduce the limitations of conventional drug delivery systems. Zein and polyvinyl pyrrolidone (PVP) are appraised for mucoadhesive properties. This study focuses on developing a mechanically stable zein/PVP electrospun membrane for propranolol hydrochloride (PL) transport. Fourier transform infrared, Raman spectra, and swelling studies gave evidence for PVP crosslinking, whereas circular dichroism spectroscopy revealed crosslinking of zein owing to the conformational change from α-helix to β-sheet. A 10 h thermal treatment of zein/PVP imparted 3.92 ± 0.13 MPa tensile strength to the matrix. Thermally crosslinked electrospun zein/PVP matrix showed 22.1 ± 0.1 g mm work of adhesion in porcine buccal mucosa tissue. Qualitative and quantitative evaluation of cytotoxicity in RPMI 2650 has been carried out. The in vitro drug release profile of PL from thermally crosslinked zein/PVP best fitted with the Korsmeyer-Peppas model. Immunostaining of β-catenin adherens junctional protein confirmed the absence of paracellular transport through the junctional opening. Still, drug permeation was observed through the porcine buccal mucosa, attributed to the transcellular transport of PL owing to its lipophilicity. The ex vivo permeation of PL through porcine buccal mucosa was also evaluated.

Hybrid Films Prepared from a Combination of Electrospinning and Casting for Offering a Dual-Phase Drug Release

One of the most important trends in developments in electrospinning is to combine itself with traditional materials production and transformation methods to take advantage of the unique properties of nanofibers. In this research, the single-fluid blending electrospinning process was combined with the casting film method to fabricate a medicated double-layer hybrid to provide a dual-phase drug controlled release profile, with ibuprofen (IBU) as a common model of a poorly water-soluble drug and ethyl cellulose (EC) and polyvinylpyrrolidone (PVP) K60 as the polymeric excipients. Electrospun medicated IBU-PVP nanofibers (F7), casting IBU-EC films (F8) and the double-layer hybrid films (DHFs, F9) with one layer of electrospun nanofibers containing IBU and PVP and the other layer of casting films containing IBU, EC and PVP, were prepared successfully. The SEM assessments demonstrated that F7 were in linear morphologies without beads or spindles, F8 were solid films, and F9 were composed of one porous fibrous layer and one solid layer. XRD and FTIR results verified that both EC and PVP were compatible with IBU. In vitro dissolution tests indicated that F7 were able to provide a pulsatile IBU release, F8 offered a typical drug sustained release, whereas F9 were able to exhibit a dual-phase controlled release with 40.3 ± 5.1% in the first phase for a pulsatile manner and the residues were released in an extended manner in the second phase. The DHFs from a combination of electrospinning and the casting method pave a new way for developing novel functional materials.