Novel Nanostructured Coating on PDMS Substrates Featuring High Resistance to Urine

Hydraulic Detrusor for Artificial Bladder Active Voiding

The gold standard treatment for bladder cancer is radical cystectomy that implies bladder removal coupled to urinary diversions. Despite the serious complications and the impossibility of controlled active voiding, bladder substitution with artificial systems is a challenge and cannot represent a real option, yet. In this article, we present hydraulic artificial detrusor prototypes to control and drive the voiding of an artificial bladder (AB). These prototypes rely on two actuator designs (origami and bellows) based either on negative or positive operating pressure, to be combined with an AB structure. Based on the bladder geometry and size, we optimized the actuators in terms of contraction/expansion performances, minimizing the liquid volume required for actuation and exploring different actuator arrangements to maximize the voiding efficiency. To operate the actuators, an ad hoc electrohydraulic circuit was developed for transferring liquid between the actuators and a reservoir, both of them intended to be implanted. The AB, actuators, and reservoir were fabricated with biocompatible flexible thermoplastic materials by a heat-sealing process. We assessed the voiding efficiency with benchtop experiments by varying the actuator type and arrangement at different simulated patient positions (horizontal, 45° tilted, and vertical) to identify the optimal configuration and actuation strategy. The most efficient solution relies on two bellows actuators anchored to the AB. This artificial detrusor design resulted in a voiding efficiency of about 99%, 99%, and 89%, in the vertical, 45° tilted, and horizontal positions, respectively. The relative voiding time was reduced by about 17, 24, and 55 s compared with the unactuated bladder.

PDMS and DLC-coated unidirectional valves for artificial urinary sphincters: Opening performance after 126 days of immersion in urine

In this work, unidirectional valves made of bare polydimethylsiloxane (PDMS) and PDMS provided with a micrometric diamond‐like carbon (DLC) coating were fabricated and characterized, in terms of surface properties and opening pressure. The valve performance was also tested over 1250 repeated cycles of opening/closure in water, finding a slight decrease in the opening pressure after such cycles (10%) for the PDMS valves, while almost no variation for the PDMS + DLC ones. The valves were then immersed in urine for 126 days, evaluating the formation of encrustations and the trend of the opening pressure over time. Results showed that PDMS valves were featured by a thin layer of encrustations after 126 days, but the overall encrustation level was much smaller than the one shown by PDMS in static conditions. Furthermore, the opening pressure was almost not affected by such a thin layer of crystals. DLC‐coated valves showed even less encrustations at the same time‐point, with no significant loss of performance over time, although they were featured by a higher variability. These results suggest that most encrustations can be removed by the mechanical action of the valve during daily openings/closures. Such a self‐cleaning behavior with respect to a static condition opens exciting scenarios for the long‐term functionality of mobile devices operating in the urinary environment.

Smart Implantable Artificial Bladder: An Integrated Design for Organ Replacement

Substituting the natural bladder with an artificial solution, after cancer and other pathologies, is an ambitious challenge in biomedical engineering. In this work we propose a fully implantable smart artificial bladder system (ABS) that collects urinary fluids and provides the subject with real-time feedback on the implant status. To achieve long term duration, the ABS was designed to be unstretchable in order to be treated with urine resistant coatings and included built-in passive check valves preventing reflux to kidneys. To estimate the amount of fluid collected, the ABS was provided with four electromagnetic distance sensing units and a control unit. An algorithm implemented on an embedded controller enabled the reconstruction of the bladder volume through sensors readings. A wireless data transfer system allows for providing a real-time feedback to the subject. Bench tests validated volume reconstruction accuracy and ex-vivo experiments verified the implantability of the proposed device on a human cadaver, proving the reliability of a Bluetooth data transmission system and paving the way towards an in-body/out-body communication. The proposed solution has the potential to overcome the limitations of currently available replacement strategies towards a new generation of implantable devices for lost organ functions replacement.