Effect of Silver-Containing Titania Layers for Bioactivity, Antibacterial Activity, and Osteogenic Differentiation of Human Mesenchymal Stem Cells on Ti Metal

Probing the influence of strontium doping and annealing temperature on the structure and biocompatibility of hydroxyapatite nanorods

Among numerous biologically important metal cations, strontium (Sr2+) has received much attention in bone tissue regeneration because of its osteoinductive properties combined with its ability to inhibit osteoclast activity. In this study, strontium-doped hydroxyapatite (Sr-HAp) nanorods with varying molar ratios of Ca : Sr (10 : 0, 9 : 1, 5 : 5, 3 : 7 and 0 : 10) were synthesized using the chemical precipitation technique. The synthesized Sr-HAp nanostructures were characterized using powder X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy, energy dispersive X-ray spectroscopy, and Raman and Fourier transform infrared (FTIR) spectroscopies to understand their structural and morphological features, and composition. XRD results revealed the formation of HAp nanostructures, whose unit cell volume increased as a function of the dopant level. The reaction process investigation showed the formation of hydroxyapatite (HAp), strontium apatite (SAp) and various Sr-HAp phases. FESEM micrographs displayed the morphological transformation of Sr-HAp from nanorods to nanosheets upon increasing the dopant level. In the FTIR spectra, the bands of the PO43- group shifted towards a lower wavenumber upon increasing the dopant concentration in Sr-HAp that signifies the structural distortion due to the presence of a large amount of strontium ions. The peaks of PO43- and OH- vibrations in the Raman spectra were further analysed to corroborate the structural distortion of Sr-HAp. Selected area electron diffraction patterns obtained using TEM reveal the reduced crystallinity of Sr-HAp due to Sr-doping, which is in line with the XRD results. Finally, the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay showed that the synthesized Sr-HAp has no toxic effect on the survival and growth of mesenchymal stem cells. In summary, the synthesized novel Sr-HAp nanorods exhibit great promise for bone tissue engineering applications.

Ion incorporation into bone grafting materials

The use of biomaterials in regenerative medicine has expanded to treat various disorders caused by trauma or disease in orthopedics and dentistry. However, the treatment of large and complex bone defects presents a challenge, leading to a pressing need for optimized biomaterials for bone repair. Recent advances in chemical sciences have enabled the incorporation of therapeutic ions into bone grafts to enhance their performance. These ions, such as strontium (for bone regeneration/osteoporosis), copper (for angiogenesis), boron (for bone growth), iron (for chemotaxis), cobalt (for B12 synthesis), lithium (for osteogenesis/cementogenesis), silver (for antibacterial resistance), and magnesium (for bone and cartilage regeneration), among others (e.g., zinc, sodium, and silica), have been studied extensively. This review aims to provide a comprehensive overview of current knowledge and recent developments in ion incorporation into biomaterials for bone and periodontal tissue repair. It also discusses recently developed biomaterials from a basic design and clinical application perspective. Additionally, the review highlights the importance of precise ion introduction into biomaterials to address existing limitations and challenges in combination therapies. Future prospects and opportunities for the development and optimization of biomaterials for bone tissue engineering are emphasized.

Investigation of human hair keratin-based nanofibrous scaffold for skin tissue engineering application

Keratin-based nanofibers were fabricated using the electrospinning technique, and their potential as scaffolds for tissue engineering was investigated. Keratin, extracted from the human hair, was blended with poly(vinyl alcohol) (PVA) in an aqueous medium. Morphological characterizations of the fabricated PVA-keratin nanofiber (PK-NF) random and aligned scaffolds performed using a scanning electron microscope (SEM) revealed the formation of uniform and randomly oriented nanofibers with an interconnected three-dimensional network structure. The mean diameter of the nanofibers ranged from 100 to 250 nm. Functional groups and structural studies were done by infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis. FTIR study suggested that PVA interacted with keratin by hydrogen bonding. Moreover, the in vitro cell culture study could suggest that PK-NF scaffolds were non-cytotoxic by supporting the growth of murine embryonic stem cells (ESCs), human keratinocytes (HaCaT), and dermal fibroblast (NHDF) cell lines. Further, the immunocytochemical characterization revealed the successful infiltration, adhesion, and growth of ESCs, HaCaT, and NHDF cells seeded on PK-NF scaffolds. However, there was no noteworthy difference observed concerning cell growth and viability irrespective of the random and aligned internal fibril arrangement of the PK-NF scaffolds. The infiltration and growth pattern of HaCaT and NHDF cells adjacent to each other in a 3D co-culture study mimicked that of epidermal and dermal skin cells and indeed underscored the potential of PK-NFs as a scaffold for skin tissue engineering.

Fabrication and characterization of ceramic-polymer composite 3D scaffolds and demonstration of osteoinductive propensity with gingival mesenchymal stem cells

The fabrication of biomaterial 3D scaffolds for bone tissue engineering applications involves the usage of metals, polymers, and ceramics as the base constituents. Notwithstanding, the composite materials facilitating enhanced osteogenic differentiation/regeneration are endorsed as the ideally suited bone grafts for addressing critical-sized bone defects. Here, we report the successful fabrication of 3D composite scaffolds mimicking the ECM of bone tissue by using ∼30 wt% of collagen type I (Col-I) and ∼70 wt% of different crystalline phases of calcium phosphate (CP) nanomaterials [hydroxyapatite (HAp), beta-tricalcium phosphate (βTCP), biphasic hydroxyapatite (βTCP-HAp or BCP)], where pH served as the sole variable for obtaining these CP phases. The different Ca/P ratio and CP nanomaterials orientation in these CP/Col-I composite scaffolds not only altered the microstructure, surface area, porosity with randomly oriented interconnected pores (80-450 μm) and mechanical strength similar to trabecular bone but also consecutively influenced the bioactivity, biocompatibility, and osteogenic differentiation potential of gingival-derived mesenchymal stem cells (gMSCs). In fact, BCP/Col-I, as determined from micro-CT analysis, achieved the highest surface area (∼42.6 m2 g-1) and porosity (∼85%), demonstrated improved bioactivity and biocompatibility and promoted maximum osteogenic differentiation of gMSCs among the three. Interestingly, the released Ca2+ ions, as low as 3 mM, from these scaffolds could also facilitate the osteogenic differentiation of gMSCs without even subjecting them to osteoinduction, thereby attesting these CP/Col-I 3D scaffolds as ideally suited bone graft materials.

Evaluation of silver bio-functionality in a multicellular in vitro model: towards reduced animal usage in implant-associated infection research

Background

Despite the extensive use of silver ions or nanoparticles in research related to preventing implant-associated infections (IAI), their use in clinical practice has been debated. This is because the strong antibacterial properties of silver are counterbalanced by adverse effects on host cells. One of the reasons for this may be the lack of comprehensive in vitro models that are capable of analyzing host-bacteria and host-host interactions.

Methods and results

In this study, we tested silver efficacy through multicellular in vitro models involving macrophages (immune system), mesenchymal stem cells (MSCs, bone cells), and S. aureus (pathogen). Our model showed to be capable of identifying each element of culture as well as tracking the intracellular survival of bacteria. Furthermore, the model enabled to find a therapeutic window for silver ions (AgNO₃) and silver nanoparticles (AgNPs) where the viability of host cells was not compromised, and the antibacterial properties of silver were maintained. While AgNO₃ between 0.00017 and 0.017 µg/mL retained antibacterial properties, host cell viability was not affected. The multicellular model, however, demonstrated that those concentrations had no effect on the survival of S. aureus, inside or outside host cells. Similarly, treatment with 20 nm AgNPs did not influence the phagocytic and killing capacity of macrophages or prevent S. aureus from invading MSCs. Moreover, exposure to 100 nm AgNPs elicited an inflammatory response by host cells as detected by the increased production of TNF-α and IL-6. This was visible only when macrophages and MSCs were cultured together.

Conclusions

Multicellular in vitro models such as the one used here that simulate complex in vivo scenarios can be used to screen other therapeutic compounds or antibacterial biomaterials without the need to use animals.

Antibacterial and Osteogenic Properties of Ag Nanoparticles and Ag/TiO2 Nanostructures Prepared by Atomic Layer Deposition

The combination of titania nanofilms and silver nanoparticles (NPs) is a very promising material, with antibacterial and osseointegration-induced properties for titanium implant coatings. In this work, we successfully prepared TiO₂ nanolayer/Ag NP structures on titanium disks using atomic layer deposition (ALD). The samples were studied by scanning electron microscopy (SEM), X-ray diffraction, X-ray photoelectron spectroscopy (XPS), contact angle measurements, and SEM-EDS. Antibacterial activity was tested against Staphylococcus aureus. The in vitro cytological response of MG-63 osteosarcoma and human fetal mesenchymal stem cells (FetMSCs) was examined using SEM study of their morphology, MTT test of viability and differentiation using alkaline phosphatase and osteopontin with and without medium-induced differentiation in the osteogenic direction. The samples with TiO₂ nanolayers, Ag NPs, and a TiO₂/Ag combination showed high antibacterial activity, differentiation in the osteogenic direction, and non-cytotoxicity. The medium for differentiation significantly improved osteogenic differentiation, but the ALD coatings also stimulated differentiation in the absence of the medium. The TiO₂/Ag samples showed the best antibacterial ability and differentiation in the osteogenic direction, indicating the success of the combining of TiO₂ and Ag to produce a multifunctional biocompatible and bactericidal material.

Bioactive and antimicrobial macro-/micro-nanoporous selective laser melted Ti-6Al-4V alloy for biomedical applications

Metal Additive Manufacturing (AM) technology is an emerging technology in biomedical field due to its unique ability to manufacture customized implants [Patients-specific Implants (PSIs)] replicating the complex bone structure from the relevant metal powders. PSIs could be developed through any AM technology, but the ultimate challenge lies in integrating the metallic implant with the living bone. Considering this aspect, in the present study, Ti alloy (Ti–6Al–4V) powder has been used to fabricate scaffolds of channel type macropores with 0–60% porosity using selective laser melting (SLM) and subsequent post-treatments paving way for surface microporosities. Surface chemical and subsequent heat treatments were carried out on thus developed Ti alloy scaffolds to improve its bioactivity, antibacterial activity and osteoblastic cell compatibility. NaOH and subsequent Ca(NO₃)₂/AgNO₃ treatment induced the formation of a nanoporous network structure decorated with Ca–Ag ions. Ag nanoparticles covering the entire scaffold provided antibacterial activity and the presence of Ca²⁺ ions with anatase TiO₂ layer further improved the bioactivity and osteoblastic cell compatibility of the scaffold. Therefore, SLM technology combined with heat treatment and surface modification could be effectively utilized to create macro-micro-nano structure scaffolds of Ti alloy that are bioactive, antibacterial, and cytocompatible.

Enhancement of hydrophilicity, biocompatibility and biodegradability of poly(ε-caprolactone) electrospun nanofiber scaffolds using poly(ethylene glycol) and poly(L-lactide-co-ε-caprolactone-co-glycolide) as additives for soft tissue engineering

In this study, poly(ε-caprolactone) (PCL) has been blended with a more hydrophilic poly(ethylene glycol) (PEG) and with a biocompatible block-co-polymer: poly(L-lactide-co-ε-caprolactone-co-glycolide) (PLCG) in order to improve hydrophilicity, biocompatibility and biodegradability of PCL. PCL and the blend solutions were subjected to electrospinning to produce nanofiber scaffolds by the addition of only 1 wt% of PEG and PLCG either singly or in combination in PCL to retain the mechanical properties of the scaffolds. PCL-PEG-PLCG ternary and two binary (PCL-PEG and PCL-PLCG) blend nanofiber scaffolds have been prepared for comparison. The resulting nanofibers showed a smooth and flaw-free surface and the diameter of the nanofibers displayed a normal distribution. The PCL-PEG nanofiber scaffold showed improved hydrophilicity [water contact angle (WCA) ∼84°] over pristine PCL (WCA ∼127°); while PCL-PLCG and PCL-PEG-PLCG scaffolds exhibited absolute wetting by water, likely due to high porosity. In vitro biocompatibility studies using gingival mesenchymal stem cells (gMSCs) suggested that, both the PCL and the blend scaffolds were biocompatible supporting cell-viability and growth of gMSCs following their seeding on these scaffolds. Biodegradation studies in phosphate buffer solution showed that the addition of PEG and PLCG in PCL increased the weight loss of scaffolds with time, indicating higher extent of biodegradation in the blend scaffolds and the weight loss followed the power law curve with time.