Surface Functionalization of PTFE Membranes Intended for Guided Bone Regeneration Using Recombinant Spider Silk

Collagen-Based Medical Devices for Regenerative Medicine and Tissue Engineering

Assisted reproductive technologies are key to solving the problems of aging and organ defects. Collagen is compatible with living tissues and has many different chemical properties; it has great potential for use in reproductive medicine and the engineering of reproductive tissues. It is a natural substance that has been used a lot in science and medicine. Collagen is a substance that can be obtained from many different animals. It can be made naturally or created using scientific methods. Using pure collagen has some drawbacks regarding its physical and chemical characteristics. Because of this, when collagen is processed in various ways, it can better meet the specific needs as a material for repairing tissues. In simpler terms, collagen can be used to help regenerate bones, cartilage, and skin. It can also be used in cardiovascular repair and other areas. There are different ways to process collagen, such as cross-linking it, making it more structured, adding minerals to it, or using it as a carrier for other substances. All of these methods help advance the field of tissue engineering. This review summarizes and discusses the current progress of collagen-based materials for reproductive medicine.

Barrier membranes for periodontal guided bone regeneration: a potential therapeutic strategy

Periodontal disease is one of the most common oral diseases with the highest incidence world-wide. In particular, the treatment of periodontal bone defects caused by periodontitis has attracted extensive attention. Guided bone regeneration (GBR) has been recognized as advanced treatment techniques for periodontal bone defects. GBR technique relies on the application of barrier membranes to protect the bone defects. The commonly used GBR membranes are resorbable and non-resorbable. Resorbable GBR membranes are divided into natural polymer resorbable membranes and synthetic polymer resorbable membranes. Each has its advantages and disadvantages. The current research focuses on exploring and improving its preparation and application. This review summarizes the recent literature on the application of GBR membranes to promote the regeneration of periodontal bone defects, elaborates on GBR development strategies, specific applications, and the progress of inducing periodontal bone regeneration to provide a theoretical basis and ideas for the future application of GBR membranes to promote the repair of periodontal bone defects.

Factors Influencing Properties of Spider Silk Coatings and Their Interactions within a Biological Environment

Biomaterials are an indispensable part of biomedical research. However, although many materials display suitable application-specific properties, they provide only poor biocompatibility when implanted into a human/animal body leading to inflammation and rejection reactions. Coatings made of spider silk proteins are promising alternatives for various applications since they are biocompatible, non-toxic and anti-inflammatory. Nevertheless, the biological response toward a spider silk coating cannot be generalized. The properties of spider silk coatings are influenced by many factors, including silk source, solvent, the substrate to be coated, pre- and post-treatments and the processing technique. All these factors consequently affect the biological response of the environment and the putative application of the appropriate silk coating. Here, we summarize recently identified factors to be considered before spider silk processing as well as physicochemical characterization methods. Furthermore, we highlight important results of biological evaluations to emphasize the importance of adjustability and adaption to a specific application. Finally, we provide an experimental matrix of parameters to be considered for a specific application and a guided biological response as exemplarily tested with two different fibroblast cell lines.

Design of Recombinant Spider Silk Proteins for Cell Type Specific Binding

Cytophilic (cell-adhesive) materials are very important for tissue engineering and regenerative medicine. However, for engineering hierarchically organized tissue structures comprising different cell types, cell-specific attachment and guidance are decisive. In this context, materials made of recombinant spider silk proteins are promising scaffolds, since they exhibit high biocompatibility, biodegradability, and the underlying proteins can be genetically functionalized. Here, previously established spider silk variants based on the engineered Araneus diadematus fibroin 4 (eADF4(C16)) are genetically modified with cell adhesive peptide sequences from extracellular matrix proteins, including IKVAV, YIGSR, QHREDGS, and KGD. Interestingly, eADF4(C16)-KGD as one of 18 tested variants is cell-selective for C2C12 mouse myoblasts, one out of 11 tested cell lines. Co-culturing with B50 rat neuronal cells confirms the cell-specificity of eADF4(C16)-KGD material surfaces for C2C12 mouse myoblast adhesion.

Differences in Mechanical and Physicochemical Properties of Several PTFE Membranes Used in Guided Bone Regeneration

Non-resorbable PTFE membranes are frequently used in dental-guided bone regeneration (GBR). However, there is a lack of detailed comparative studies that define variations among commonly used PTFE membranes in daily dental clinical practice. The aim of this study was to examine differences in physicochemical and mechanical properties of several recent commercial PTFE membranes for dental GBR (CytoplastTM TXT-200, permamem®, NeoGen®, Surgitime, OsseoGuard®-TXT, OsseoGuard®-NTXT). Such differences have been rarely recorded so far, which might be a reason for the varied clinical results. For that reason, we analyzed their surface architecture, chemical composition, tensile strength, Young's modulus, wettability, roughness, density, thickness and porosity. SEM revealed different microarchitectures among the non-textured membranes; the textured ones had hexagonal indentations and XPS indicated an identical spectral portfolio in all membranes. NeoGen® was determined to be the strongest and OsseoGuard®-TXT was the most elastic. Wettability and roughness were highest for Surgitime but lowest for OsseoGuard®-NTXT. Furthermore, permamem® was the thinnest and NeoGen® was identified as the thickest investigated GBR membrane. The defect volumes and defect volume ratio (%) varied significantly, indicating that permamem® had the least imperfect structure, followed by NeoGen® and then Cytoplast TM TXT-200. These differences may potentially affect the clinical outcomes of dental GBR procedures.

Various Coated Barrier Membranes for Better Guided Bone Regeneration: A Review

A good barrier membrane is one of the important factors for effective guided bone/tissue regeneration (GBR/GTR) in the case of periodontal bone defects. Several methods are being discussed to overcome and improve the shortcomings of commercially available membranes. One of the methods is to coat the membrane with bioactive materials. In this study, 41 studies related to coated membranes for GBR/GTR published in the last 5 years were reviewed. These studies reported coating the membrane with various bioactive materials through different techniques to improve osteogenesis, antimicrobial properties, and physical/mechanical properties. The reported studies have been classified and discussed based on the purpose of coating. The goal of the most actively studied research on coating or surface modification of membranes is to improve new bone formation. For this purpose, calcium phosphate, bioactive glass, polydopamine, osteoinduced drugs, chitosan, platelet-rich fibrin, enamel matrix derivatives, amelotin, hyaluronic acid, tantalum, and copper were used as membrane coating materials. The paradigm of barrier membranes is changing from only inert (or biocompatible) physical barriers to bioactive osteo-immunomodulatory for effective guided bone and tissue regeneration. However, there is a limitation that there exists only a few clinical studies on humans to date. Efforts are needed to implement the use of coated membranes from the laboratory bench to the dental chair unit. Further clinical studies are needed in the patients’ group for long-term follow-up to confirm the effect of various coating materials.

Combining Coaxial Electrospinning and 3D Printing: Design of Biodegradable Bilayered Membranes with Dual Drug Delivery Capability for Periodontitis Treatment

Periodontitis is a chronic inflammatory disease that can lead to significant destruction of tooth-supporting tissues, compromising dental function and patient's health. Although the currently employed treatment approaches can limit the advance of the disease, the development of multifunctional and hierarchically structured materials is still in demand for achieving successful tissue regeneration. Here, we combine coaxial electrospinning and 3D printing techniques to prepare bilayered zein-based membranes as a potential dual drug delivery platform for periodontal tissue regeneration. A layer of core-sheath electrospun nanofibers consisting of poly(ethylene oxide) (PEO)/curcumin (Curc)/tetracycline hydrochloride (TH) as the core and zein/poly(ε-caprolactone)(PCL)/β-glycerolphosphate (β-GP) as the sheath was deposited over a 3D printed honeycomb PLA/zein/Curc platform in order to render a bilayered structure that can mimic the architecture of periodontal tissue. The physicochemical properties of engineered constructs as well as the release profiles of distinct drugs were mainly controlled by varying the concentration of zein (10, 20, 30%, w/w relative to dry PCL) on the sheath layer of nanofibers, which displayed average diameters ranging from 150 to 400 nm. In vitro experiments demonstrated that the bilayered constructs provided sustained release of distinct drugs over 8 days and exhibited biocompatibility toward human oral keratinocytes (Nok-si) (cell viability >80%) as well as antibacterial activity against distinct bacterial strains including those of the red complex such as Porphyromonas gingivalis and Treponema denticola, which are recognized to elicit aggressive and chronic periodontitis. Our study reveals the potential of zein-based bilayered membranes as a dual drug delivery platform for periodontal tissue regeneration.

Cold Plasma Systems and their Application in Surface Treatments for Medicine

In this paper, a review of cold plasma setups and the physical and chemical processes leading to the generation of active species is presented. The emphasis is given to the interaction of cold plasmas with materials used in medical applications, especially medical implants as well as live cells. An overview of the different kinds of plasmas and techniques used for generation of active species, which significantly alter the surface properties of biomaterials is presented. The elemental processes responsible for the observed changes in the physio-chemical properties of surfaces when exposed to plasma are described. Examples of ongoing research in the field are given to illustrate the state-of-the-art at the more conceptual level.

Protein adsorption and bioactivity of functionalized electrospun membranes for bone regeneration

OBJECTIVES

To evaluate the adsorption of bone related proteins and bioactivity of experimental functionalized (carboxylated or aminated) polymeric membranes for bone regeneration.

METHODS

Polymethylmethacrylate-based membranes functionalized with carboxyl or amino radicals were tested. Membranes were zinc loaded and the adsorption isotherms of zinc were studied. Human plasma proteins, bovine serum albumin, fibrinogen and fibronectin adsorption were measured with a spectrophotometer applying an acid determination protocol. Biomimetic calcium phosphate precipitation on polymeric membranes was also assessed after simulated body fluid immersion. Scanning electron microscopy and elemental analysis by means of an energy dispersive system were used for mineral deposits identification. A commercially available polytetrafluoroethylene membrane was used as control.

RESULTS

Both experimental membranes produced higher protein adsorption than the commercial control that does not adsorb proteins. Carboxylated membranes adsorbed significantly more albumin than the aminated ones, the opposite occurred with fibrinogen. With plasma and fibronectin proteins both type of membranes performed similarly. Only carboxylated membranes were bioactive and precipitated calcium and phosphate on their surfaces.

CONCLUSIONS

The polymethylmethacrylate zinc-loaded membranes functionalized with carboxyl groups performed as high adsorbable membranes for bone regeneration related proteins. They also served as templates for mineralization of hydroxyapatite.

CLINICAL SIGNIFICANCE

Protein adsorption is the initial reaction after the implantation of a biomaterial into the body and will influence subsequent cell function. The adsorption of bone related proteins together with the observed biomimetic calcium deposition on the experimental carboxylated membranes could be associated with their ability to promote bone regeneration.