Poly(l-lactic acid) (PLLA)/MgSO4·7H2O Composite Coating on Magnesium Substrates for Corrosion Protection and Cytocompatibility Promotion

Application and Perspectives: Magnesium Materials in Bone Regeneration

The field of bone regeneration has always been a hot and difficult research area, and there is no perfect strategy at present. As a new type of biodegradable material, magnesium alloys have excellent mechanical properties and bone promoting ability. Compared with other inert metals, magnesium alloys have significant advantages and broad application prospects in the field of bone regeneration. By searching the official Web sites and databases of various funds, this paper summarizes the research status of magnesium composites in the field of bone regeneration and introduces the latest scientific research achievements and clinical transformations of scholars in various countries and regions, such as improving the corrosion resistance of magnesium alloys by adding coatings. Finally, this paper points out the current problems and challenges, aiming to provide ideas and help for the development of new strategies for the treatment of bone defects and fractures.

Chronic kidney disease: a contraindication for using biodegradable magnesium or its alloys as potential orthopedic implants?

Magnesium (Mg) has gained widespread recognition as a potential revolutionary orthopedic biomaterial. However, whether the biodegradation of the Mg-based orthopedic implants would pose a risk to patients with chronic kidney disease (CKD) remains undetermined as the kidney is a key organ regulating mineral homeostasis. A rat CKD model was established by a 5/6 subtotal nephrectomy approach, followed by intramedullary implantation of three types of pins: stainless steel, high pure Mg with high corrosion resistance, and the Mg-Sr-Zn alloy with a fast degradation rate. The long-term biosafety of the biodegradable Mg or its alloys as orthopedic implants were systematically evaluated. During an experimental period of 12 weeks, the implantation did not result in a substantial rise of Mg ion concentration in serum or major organs such as hearts, livers, spleens, lungs, or kidneys. No pathological changes were observed in organs using various histological techniques. No significantly increased iNOS-positive cells or apoptotic cells in these organs were identified. The biodegradable Mg or its alloys as orthopedic implants did not pose an extra health risk to CKD rats at long-term follow-up, suggesting that these biodegradable orthopedic devices might be suitable for most target populations, including patients with CKD.

Synthesis of an insulin-loaded mucoadhesive nanoparticle designed for intranasal administration: focus on new diffusion media

Intranasal administration is a drug delivery approach to provide a non-invasive pharmacological response in the central nervous system with relatively small peripheral side effects. To improve the residence time of intranasal drug delivery systems in the nasal mucosa, mucoadhesive polymers (e.g., chitosan) can be used. Here, insulin-loaded chitosan nanoparticles were synthesized and their physiochemical properties were evaluated based on requirements of intranasal administration. The nanoparticles were spherical (a hydrodynamic diameter of 165.3 nm, polydispersity index of 0.24, and zeta potential of +21.6 mV) that granted mucoadhesion without any noticeable toxicity to the nasal tissue. We applied a new approach using the Krebs-Henseleit buffer solution along with simulated nasal fluid in a Franz's diffusion cell to study this intranasal drug delivery system. We used the Krebs-Henseleit buffer because of its ability to supply glucose to the cells which serves as a novel ex vivo diffusion medium to maintain the viability of the tissue during the experiment. Based on diffusion rate and histopathological endpoints, the Krebs-Henseleit buffer solution can be a substituent solution to the commonly used simulated nasal fluid for such drug delivery systems.

A comprehensive review of properties of the biocompatible thin films on biodegradable Mg alloys

Magnesium (Mg) and its alloys have attracted attention as biodegradable materials for biomedical applications owing to their mechanical properties being comparable to that of bone. Mg is a vital trace element in many enzymes and thus forms one of the essential factors for human metabolism. However, before being used in biomedical applications, the early stage or fast degradation of Mg and its alloys in the physiological environment should be controlled. The degradation of Mg alloys is a critical criterion that can be controlled by a surface modification which is an effective process for conserving their desired properties. Different coating methods have been employed to modify Mg surfaces to provide good corrosion resistance and biocompatibility. This review aims to provide information on different coatings and discuss their physical and biological properties. Finally, the current withstanding challenges have been highlighted and discussed, followed by shedding some light on future perspectives.

A Bilayer Membrane Doped with Struvite Nanowires for Guided Bone Regeneration

Guided bone regeneration (GBR) therapy demonstrates a prominent curative effect on the management of craniomaxillofacial (CMF) bone defects. In this study, a GBR membrane consisting of a microporous layer and a struvite-nanowire-doped fibrous layer is constructed via non-solvent induced phase separation, followed by an electrospinning procedure to treat critical-sized calvarial defects. The microporous layer shows selective permeability for excluding the rapid-growing non-osteogenic tissues and potential wound stabilization. The nanowire-like struvite is synthesized as the deliverable therapeutic agent within the fibrous layer to facilitate bone regeneration. Such a membrane displays a well-developed heterogeneous architecture, satisfactory mechanical performance, and long-lasting characteristics. The in vitro biological evaluation reveals that apart from being a strong barrier, the bilayer struvite-laden membrane can actively promote cellular adhesion, proliferation, and osteogenic differentiation. Consequently, the multifunctional struvite-doped membranes are applied to treat 5 mm-sized bilateral calvarial defects in rats, resulting in overall improved healing outcomes compared with the untreated or the struvite-free membrane-treated group, which is characterized by enhanced osteogenesis and significantly increased new bone formation. The encouraging preclinical results reveal the great potential of the bilayer struvite-doped membrane as a clinical GBR device for augmenting large-area CMF bone reconstruction.

A Comprehensive Review on Surface Modifications of Biodegradable Magnesium-Based Implant Alloy: Polymer Coatings Opportunities and Challenges

The development of biodegradable implants is certainly intriguing, and magnesium and its alloys are considered significant among the various biodegradable materials. Nevertheless, the fast degradation, the generation of a significant amount of hydrogen gas, and the escalation in the pH value of the body solution are significant barriers to their use as an implant material. The appropriate approach is able to solve this issue, resulting in a decrease the rate of Mg degradation, which can be accomplished by alloying, surface adjustment, and mechanical treatment. Surface modification is a practical option because it not only improves corrosion resistance but also prepares a treated surface to improve bone regeneration and cell attachment. Metal coatings, ceramic coatings, and permanent polymers were shown to minimize degradation rates, but inflammation and foreign body responses were also suggested. In contrast to permanent materials, the bioabsorbable polymers normally show the desired biocompatibility. In order to improve the performance of drugs, they are generally encapsulated in biodegradable polymers. This study summarized the most recent advancements in manufacturing polymeric coatings on Mg alloys. The related corrosion resistance enhancement strategies and future potentials are discussed. Ultimately, the major challenges and difficulties are presented with aim of the development of polymer-coated Mg-based implant materials.

Anticancer Activity of Samarium-Coated Magnesium Implants for Immunocompromised Patients

The removal of tumors in the osseous tissue leads to functional disorders. To overcome this issue, biodegradable implants are used to replace the damaged part of the system. In the study, samarium oxide was coated on the anodic layer of AZ31 magnesium alloy. The potentiodynamic polarization, electrochemical impedance, and localized electrochemical impedance spectroscopy studies were carried out for the samarium-coated magnesium alloy. The corrosion resistance of the coating improved several folds than the bare alloy. The apatite formed on the 3rd day of immersion in the simulated body fluid showed cuboid and triangular structures, whereas on the 7th day, it exhibited a sea sponge-like appearance. The coating exhibited inherent anticancer and antibacterial properties. Our work suggests that the samarium coating is expected to be a promising orthopedic implant for preventing tumor relapse and metastasis.