Study on Bacterial Antiadhesiveness of Stiffness and Thickness Tunable Cross-Linked Phospholipid Copolymer Thin-Film

Antimicrobial Peptide Assembly on Zwitterionic Polymer Films to Slow Down Biofilm Formation

Formation of biofilms on equipment used in various fields, such as medicine, domestic sanitation, and marine transportation, can cause serious problems. The use of antibiofouling and bactericidal modifications is a promising strategy for inhibiting bacterial adhesion and biofilm formation. To further enhance the antibiofilm properties of a surface, various combinations of bactericidal modifications alongside antibiofouling modifications have been developed. Optimization of the arrangements of antimicrobial peptides on the antibiofouling surface would allow us to design longer-life antibiofilm surface modifications. In this study, a postmodification was conducted with different design using the antimicrobial peptide KR12 on an antibiofouling copolymer film consisting of 2-methacryloyloxyethyl phosphorylcholine, 3-methacryloxypropyl trimethoxysilane, and 3-(methacryloyloxy) propyl-tris(trimethylsilyloxy) silane. The distance of KR12 from the film was adjusted by combining different lengths of poly(ethylene glycol) (PEG) spacers (molecular weights are 2000 and 5000). The density of KR12 was ranged from 0.06 to 0.22 nm-2. When these modified surfaces were exposed to a nutrient-rich TSB suspension, the bacterial area formed by E. coli covered 5-127% of the original copolymer film. We found that a significant distance between the bactericidal and antibiofouling modifications, along with a higher density of bactericidal modifications, slows down the biofilm formation.

Bactericidal Ability of Well-Controlled Cationic Polymer Brush Surfaces and the Interaction Analysis by Quartz Crystal Microbalance with Dissipation

In this study, cationic poly(2-(methacryloyloxy)ethyl) trimethylammonium chloride) (PMTAC) brush surfaces were prepared by surface-initiated atom transfer radical polymerization (SI-ATRP), and their properties were systematically investigated to discuss the factors affecting their bactericidal properties and interactions with proteins. Model equations for the analysis of electrophoretic behaviors were considered for accurate parameter estimation to indicate the charge density at the interface. The zeta potential dependency of the PMTAC brushes was successfully analyzed using Smolchowski's equation and the Gouy-Chapman model, which describes the diffusive electric double layer. The analysis of the quartz crystal microbalance with dissipation (QCM-D) indicated that the electrostatic interaction promoted protein adsorption, with a large quantity of a negatively charged protein, bovine serum albumin (BSA), being adsorbed. The bactericidal efficiency of the high-graft-density polymer brush (0.45 chains nm-2) was higher than that of the low-graft-density polymer brush (0.06 chains nm-2). To investigate the mechanism of this phenomenon, we applied the dissipation change (ΔD) of QCM-D analysis. The BSA was likewise adsorbed when the brush structure was changed; however, the negative ΔD indicated that the BSA-adsorbed, high-graft-density PMTAC brush became a rigid state. In the bacteria culture media, the behaviors were the same as BSA adsorption, and the high-graft-density polymer brush was also estimated to be more rigid than the low-graft-density polymer brush. Moreover, for S. aureus adhesion after incubating in TSB, a small slope of ΔD/ΔF plots considered initial adsorption of bacteria on the high-graft-density polymer brush strongly interacted compared to that of the low-graft-density polymer brush. The scattered value of the slope of ΔD/ΔF on the high-graft-density polymer brush was considered to be due to the dead bacteria between the bacteria and the polymer brush interface. These investigations for a well-defined cationic polymer brush will contribute to the design of antibacterial surfaces.

Silane coupling agent in biomedical materials

Medical devices are becoming more and more significant in our daily life. For implantable medical devices, good biocompatibility is required for further use in vivo. Thus, surface modification of medical devices is really important, which gives a wide application scene for a silane coupling agent. The silane coupling agent is able to form a durable bond between organic and inorganic materials. The dehydration process provides linking sites to achieve condensation of two hydroxyl groups. The forming covalent bond brings excellent mechanical properties among different surfaces. Indeed, the silane coupling agent is a popular component in surface modification. Metals, proteins, and hydrogels are using silane coupling agent to link parts commonly. The mild reaction environment also brings advantages for the spread of the silane coupling agent. In this review, we summarize two main methods of using the silane coupling agent. One is acting as a crosslinker mixed in the whole system, and the other is to provide a bridge between different surfaces. Moreover, we introduce their applications in biomedical devices.

Antibacterial features of material surface: strong enough to serve as antibiotics?

Bacteria are small but need big efforts to control. The use of antibiotics not only produces superbugs that are increasingly difficult to inactivate, but also raises environmental concerns with the growing consumption. It is now believed that the antibacterial task can count on some physiochemical features of material surfaces, which can be anti-adhesive or bactericidal without releasing toxicants. It is necessary to evaluate to what extent can we rely on the surface design since the actual application scenarios will need the antibacterial performance to be sharp, robust, environmentally friendly, and long-lasting. Herein, we review the recent laboratory advances that have been classified based on the specific surface features, including hydrophobicity, charge potential, micromorphology, stiffness and viscosity, and photoactivity, and the antibacterial mechanisms of each feature are included to provide a basic rationale for future design. The significance of anti-biofilms is also introduced, given the big role of biofilms in bacteria-caused damage. A perspective on the potential wide application of antibacterial surface features as a substitute or supplement to antibiotics is then discussed. Surface design is no doubt a solution worthy to explore, and future success will be a result of further progress in multiple directions, including mechanism study and material preparation.

Interplay of physico-chemical and mechanical bacteria-surface interactions with transport processes controls early biofilm growth: A review

Biofilms initiate when bacteria encounter and are retained on surfaces. The surface orchestrates biofilm growth through direct physico-chemical and mechanical interactions with different structures on bacterial cells and, in turn, through its influence on cell-cell interactions. Individual cells respond directly to a surface through mechanical or chemical means, initiating "surface sensing" pathways that regulate gene expression, for instance producing extra cellular matrix or altering phenotypes. The surface can also physically direct the evolving colony morphology as cells divide and grow. In either case, the physico-chemistry of the surface influences cells and cell communities through mechanisms that involve additional factors. For instance the numbers of cells arriving on a surface from solution relative to the generation of new cells by division depends on adhesion and transport kinetics, affecting early colony density and composition. Separately, the forces experienced by adhering cells depend on hydrodynamics, gravity, and the relative stiffnesses and viscoelasticity of the cells and substrate materials, affecting mechanosensing pathways. Physical chemistry and surface functionality, along with interfacial mechanics also influence cell-surface friction and control colony morphology, in particular 2D and 3D shape. This review focuses on the current understanding of the mechanisms in which physico-chemical interactions, deriving from surface functionality, impact individual cells and cell community behavior through their coupling with other interfacial processes.

Single cell organization and cell cycle characterization of DNA stained multicellular tumor spheroids

Multicellular tumor spheroids (MCTSs) can serve as in vitro models for solid tumors and have become widely used in basic cancer research and drug screening applications. The major challenges when studying MCTSs by optical microscopy are imaging and analysis due to light scattering within the 3-dimensional structure. Herein, we used an ultrasound-based MCTS culture platform, where A498 renal carcinoma MCTSs were cultured, DAPI stained, optically cleared and imaged, to connect nuclear segmentation to biological information at the single cell level. We show that DNA-content analysis can be used to classify the cell cycle state as a function of position within the MCTSs. We also used nuclear volumetric characterization to show that cells were more densely organized and perpendicularly aligned to the MCTS radius in MCTSs cultured for 96 h compared to 24 h. The method presented herein can in principle be used with any stochiometric DNA staining protocol and nuclear segmentation strategy. Since it is based on a single counter stain a large part of the fluorescence spectrum is free for other probes, allowing measurements that correlate cell cycle state and nuclear organization with e.g., protein expression or drug distribution within MCTSs.

Physicochemical aspects of design of ultrathin films based on chitosan, pectin, and their silver nanocomposites with antiadhesive and bactericidal potential

Implant-related infection is one of the serious problems in regenerative medicine. Promising approach to overcome the problems caused by bacterial growth on the medical implants is their modification by bioactive coatings. A versatile technique for designing multilayer films with tailored characteristics at the nanometer scale is layer-by-layer assembly. In this study, multilayer films based on biopolymers (pectin and chitosan) and their nanocomposites with silver nanoparticles have been prepared and evaluated. The buildup of multilayers was monitored using the quartz crystal microbalance with dissipation technique. The morphology of the obtained films was investigated by atomic force microscopy. We have demonstrated that pectin-Ag-containing films were characterized by the linear growth and smooth defect-free surface. When pectin-Ag was substituted for the pectin in the multilayer systems, the properties of the formed coatings were significantly changed: the film rigidity and surface roughness increased, as well as the film growth acquired the parabolic character. All prepared multilayer films have shown antibacterial activity against gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) bacteria. The significant decrease in the number of the adhered E. coli on the multilayer surface has been determined; moreover, many of the cells were misshapen with cytoplasm leaking. The prepared multilayer films showed a mild activity against S. aureus predominantly due to the antiadhesive effect. Our results indicate that antibacterial activity of biopolymer multilayers is determined by the film composition and physicochemical characteristics and can be associated with their antiadhesive and bactericidal behaviors.

Evaluation of bacterial adhesion strength on phospholipid copolymer films with antibacterial ability using microfluidic shear devices

Biomimetic phospholipid copolymer films are known to possess antifouling properties against protein adsorption and biofilm formation. However, the interactions between bacterial cells and material surfaces are not fully understood. This work investigated the bacterial adhesion strength of phospholipid copolymer films using a shear stress-tunable microfluidic device. The copolymer, comprising 2-methacryloyloxyethyl phosphorylcholine (MPC), 3-methacryloxypropyl trimethoxysilane (MPTMSi), and 3-(methacryloyloxy) propyl-tris(trimethylsilyloxy) silane (MPTSSi), formed crosslinked films on glass substrates; the thickness of the coating film was controlled by the polymer concentration during dip-coating. Polymer films with two typical thicknesses, 20 and 40 nm (denoted as C-20 and C-40, respectively), were prepared on the bottom wall of the microfluidic device. After seeding S. aureus in the microfluidic device, several shear stresses were applied to evaluate the adhesion strength of the polymer films. S. aureus was found to have weaker adhesion strength on the C-40 surface than on the C-20 surface; numerous bacterial cells detached from the C-40 surface on application of identical shear stress. To mimic the presence of plasma protein, fibrinogen (Fg) was introduced into the device before performing the bacterial adhesion assay. The results showed that the adsorption of Fg promoted S. aureus adhesion and strong interactions under shear stress. However, the adhesion strength of S. aureus did not affect the Fg adsorption for both the C-20 and C-40 surfaces. Using the shear stress-tunable microfluidic device, we found that the adhesion of S. aureus on the thicker and softer phospholipid copolymer was weak, and the cells easily detached under high shear stress.

Hydrophilic dangling chain interfacial segregation in polyurethane networks at aqueous interfaces and its underlying mechanisms: molecular dynamics simulations

Polymer networks with hydrophilic dangling chains are ideal candidates for many submerged applications, e.g., protein non-adhesive coatings with non-fouling behavior. The dangling chains segregate from the polymer network towards the water and form a brush-like structure at the interface. Several factors such as the polymer network structure, dangling chain length, and water/dangling chain interaction may all affect the interfacial performance of the polymer. Therefore, we employed a Martini based coarse-grained (CG) molecular dynamics (MD) simulation to elucidate the influences of the abovementioned parameters on dangling chain interfacial segregation. We built up several polyurethane (PU) networks based on poly(tetra methylene glycol) (PTMG), as a macrodiol, and methoxy poly(ethylene glycol) (mPEG), as a dangling chain, with varying molecular weights. We found out that the macrodiol/dangling chain length ratio considerably smaller than one impedes the migration of dangling chains towards the water interface, while the dangling chain hydrophilicity and length determine the polymer interfacial layer density/thickness. Then, we artificially changed the dangling chain affinity to water from an intermediate to a very attractive water/dangling chain interaction. We justified that a brush-like structure forms in two consecutive steps: first, a longitudinal, and then a lateral migration of dangling chains in water. The latter step results in a uniform interfacial layer over the polymer interface that mainly occurs in the case of the attractive water/dangling chain interaction.