Full-Range Ratiometric Detection of D2O in H2O by a Heterobimetallic Uranyl/Lanthanide Framework with 4f/5f Bimodal Emission

Immobilization of europium and terbium ions with tunable ratios on a dispersible two-dimensional metal-organic framework for ratiometric photoluminescence detection of D2O

A two-dimensional zirconium-based metal-organic framework (2D Zr-MOF), ZrBTB (BTB = 1,3,5-tri(4-carboxyphenyl)benzene), is used as a platform to simultaneously immobilize terbium ions and europium ions with tunable ratios on its hexa-zirconium nodes by a post-synthetic modification. The crystallinity, morphology, porosity and photoluminescence (PL) properties of the obtained 2D Zr-MOFs with various europium-to-terbium ratios are investigated. With the energy transfer from the excited BTB linker to the installed terbium ions and the energy transfer from terbium ions to europium ions, a low loading of immobilized europium ions and a high loading of surrounding terbium ions in the 2D Zr-MOF result in the optimal PL emission intensities of europium; this phenomenon is not observable for the physical mixture of both terbium-installed ZrBTB and europium-installed ZrBTB. The role of installed terbium ions as efficient mediators for the energy transfer from the excited BTB linker to the installed europium ion is confirmed by quantifying PL quantum yields. As a demonstration, these materials with modulable PL characteristics are applied for the ratiometric detection of D2O in water, with the use of the stable emission from the BTB linker as the reference. With the strong emission of immobilized europium ions and the good dispersity in aqueous solutions, the optimal bimetal-installed ZrBTB, Eu-Tb-ZrBTB(1 : 10), can achieve the sensing performance outperforming those of the terbium-installed ZrBTB, europium-installed ZrBTB and the physical mixture of both.

A dynamic Eu(III)-macrocycle served as the turn-on fluorescent probe for distinguishing H2O from D2O

H2O and D2O are an important pair of analogues, and their high-efficient detections are closely related to fields of chemical industry, food processing, semiconductor, environmental monitoring, etc. Because of their extremely similar physical and chemical properties, H2O and D2O can be mutually soluble in any ratios, and it is generally thought that the discrimination of H2O and D2O is an enormous challenge. Herein, upon the fact that vibrational frequency of O-H is greater than O-D, we design a dynamic Eu(III)-macrocycle Eu-2a with two emitters which exhibits the imine bond breakage of macrocycle emitter H2L2a in H2O or D2O, resulting in the turn-on fluorescence of Eu(III) emitter. For their differential fluorescence sensing signals of Eu-2a on three emission bands (433, 500 and 615 nm), the statistical analysis method is employed to produce fully separated fingerprints and thus high-throughput discrimination of 13 common solvents, especially the H2O and D2O. Fluorescent titration experiments by instrumental or smartphone-based analysis method also prove the successful determination of proportional H2O/D2O mixtures together with the good sensitivity and wide linear response range. Moreover, this H2O-triggered fluorescent complex Eu-2a used as the fluorescence ink also shows its potential in information encryption application. This article must be a valuable reference for the areas of lanthanide-based luminescent material, multianalyte detection and information encryption.

Luminescence enhancement by deuterium

Created literally at the dawn of time, deuterium has been extremely valuable in so many chemistry roles. The subject of this review focuses on one deuterium application in particular: its enhancement of luminescence in many substances. After providing general overviews of both deuterium and luminescence, the early exploration of deuterium's effect on luminescence is described, followed by a number of specific topics. These sections include a discussion of deuterium-influenced luminescence for dyes, proteins, singlet oxygen, and the lanthanide elements, as well as anomalous inverse deuterium luminescence effects. Future directions for this important research topic are also proposed, as well as a summary conclusion.

Deep Eutectic Solvent-Based Highly Sensitive Turn-On Fluorescent Probe for D2O

Owing to the importance of heavy water in spectroscopy, nuclear energy generation, chemical characterization, and biological industry, a design of a robust, cheap, nontoxic, and sensitive D2O sensor is very important. In this work, taking advantage of the singular emission fluorescence of the deep eutectic solvent prepared in our laboratory, we propose a first of its kind highly sensitive turn-on fluorescent sensor to effectively sense D2O at an ultratrace level based on rapid exchange of the labile DES proton with deuterium. This method can be used as a full-range heavy water detection strategy with a limit of detection of 0.079% (v/v) or 870 ppm. The isotopic purity (IP) obtained from DES fluorescence measurements is also in close agreement with that of the conventional FT-IR method. The current DES-based sensor thus allows both sensing and isotopic purity of D2O and can serve as one of the most sensitive monitoring strategies for heavy water analysis.

1O2-Relevant Afterglow Luminescence of Chlorin Nanoparticles for Discriminative Detection and Isotopic Analysis of H2O and D2O

Discriminative detection between D₂O and H₂O is important for diverse fields but challenging due to their high similarity in chemical and physical properties. Current molecular sensors for D₂O detection generally rely on the spectral change of fluorophores with suitable pK_a in response to D₂O and H₂O with slightly different pH acidity. Herein, we report a new and facile D₂O sensor by using singlet oxygen (¹O₂)-relevant afterglow luminescence of chlorin e4 nanoparticles (Ce4-NPs) to achieve distinguishable detection between D₂O and H₂O. As ¹O₂ is a key initiator involved in the afterglow luminescence process, it displays a 22-fold longer lifetime in D₂O relative to H₂O and thereafter generates more dioxetane intermediates after laser irradiation to lead to ultimate afterglow brightness of Ce4-NPs in D₂O. In addition, Ce4-NPs are capable of quantitatively detecting the amount of H₂O in D₂O with a limit of detection (LOD) of 1.45%. Together, this study broadens the utility of afterglow materials and presents a facile strategy for isotopic purity analysis of heavy water.

Simultaneous Sensing of H2 O, D2 O and HOD through Peroxo Vibrations

Detection of HOD simultaneously in the presence of a mixture of H₂ O and D₂ O is still an experimental challenge. Till date, there is no literature report of simultaneous detection of H₂ O, D₂ O and HOD based on vibrational spectra. Herein we report simultaneous quantitative detection of H₂ O, D₂ O and HOD in the same reaction mixture with the help of bridged polynuclear peroxo complex in absence and presence of Au nanoparticles on the basis of a peroxide vibrational mode in resonance Raman and surface enhanced resonance Raman spectrum. We synthesize bridged polynuclear peroxo complex in different solvent mixture of H₂ O and D₂ O. Due to the formation of different nature of hydrogen bonding between peroxide and solvent molecules (H₂ O, D₂ O and HOD), vibrational frequency of peroxo bond is significantly affected. Mixtures of different H₂ O and D₂ O concentrations produce different HOD concentrations and that lead to different intensities of peaks positioned at 897, 823 and 867 cm^-1 indicating H₂ O, D₂ O and HOD, respectively. The lowest detection limits (LODs) were 0.028 mole fraction of D₂ O in H₂ O and 0.046 mole faction of H₂ O in D₂ O. In addition, for the first time the results revealed that the cis-peroxide forms two hydrogen bonds with solvent molecules.

Rigid Enhanced Electrochemiluminescence of 1,2,3-Triaryl Indenes as an Ultrasensitive Sensor for D2O in H2O

The intriguing aggregation-induced emission has recently been applied in the electrochemiluminescence, called aggregation-induced electrochemiluminescence (AIE-ECL), which is conducive to solving the water insolubility and aggregation-caused quenching for most organic luminescence probes. However, AIE-ECL still has the problems of low luminous efficiency and limited practical application. In this work, we disclosed the AIE-ECL properties of 1,2,3-triaryl-substituted indenes containing rigid structures. Experimental and theoretical investigations demonstrated that such a rigid structure could significantly enhance the aromaticity and stability and thereby the luminescence performance of these indenes. Moreover, according to the finding of hydrogen/deuterium exchange for active hydrogen in indene under electrical excitation, ultrasensitive detection for D₂O in H₂O was realized by such an indene-based AIE-ECL system. Our research not only provided an attractive strategy to enhance the luminescence property for an AIE-active luminophore but also established a superior sensor toward D₂O.

Layered Uranyl Phosphonates Encapsulating Co(II)/Mn(II)/Zn(II) Ions: Exfoliation into Nanosheets and Its Impact on Magnetic and Luminescent Properties

Layered heterometallic 5f-3d uranyl phosphonates can exhibit unique luminescent and/or magnetic properties, but the fabrication and properties of their 2D counterparts have not been investigated. Herein we report three heterobimetallic uranyl phosphonates, namely, [(UO₂ )₃ M(2-pmbH)₄ (H₂ O)₄ ] ⋅ 2H₂ O [MU, M=Co(II), CoU; Mn(II), MnU; Zn(II), ZnU; 2-pmbH₃ =2-(phosphonomethyl)benzoic acid]. They are isostructural and display two-dimensional layered structures where the M(II) centers are encapsulated inside the windows generated by the diamagnetic uranyl phosphonate layer. Each M(II) has an octahedral geometry filled with four water molecules in the equatorial positions and two phosphonate oxygen atoms in the axial positions. The uranium atoms adopt UO₇ pentagonal bipyramidal and UO₆ square bipyramidal geometries. The lattice and coordination water molecules can be released by thermal treatment and reabsorbed in a reversible manner, accompanied with changes of magnetic dynamics. Interestingly, the bulk samples of MU can be exfoliated in acetone via freezing and thawing processes forming nanosheets with single-layer or two-layer thickness (MU-ns). Magnetic studies revealed that the CoU and MnU systems exhibited field-induced slow magnetization relaxation at low temperature. Compared with crystalline CoU, the magnetic relaxation of the CoU-ns aggregates is significantly accelerated. Moreover, photoluminescence measured at 77 K showed slight red-shift of the five characteristic uranyl emission bands for ZnU-ns in comparison with those of the crystalline ZnU. This work gives the first examples of 2D materials based on 5f-3d heterometallic uranyl phosphonates and illustrates the impact of dimension reduction on their magnetic/optical properties.

Development of Cationic Benzimidazole-Containing UiO-66 through Step-by-Step Linker Modification to Enhance the Initial Sorption Rate and Sorption Capacities for Heavy Metal Oxo-Anions

Effective and rapid capture of heavy metal oxo-anions from wastewater is a fascinating research topic, but it remains a great challenge. Herein, benzimidazole and -CH₃ groups were integrated into UiO-66 in succession via a step-by-step linker modification strategy that was performed by presynthesis modification (to give Bim-UiO-66) and subsequently by postsynthetic ionization (to give Bim-UiO-66-Me). The UiO-66s (UiO-66, Bim-UiO-66, and Bim-UiO-66-Me) were applied in the removal of heavy metal oxo-anions from water. The two benzimidazole derivatives (Bim-UiO-66 and Bim-UiO-66-Me) showed much better performance than UiO-66, as both the initial sorption rate and sorption capacities decreased in the order Bim-UiO-66-Me > Bim-UiO-66 > UiO-66. The maximum performances of Bim-UiO-66 are 5.1 and 1.7 times those of UiO-66. Remarkably, Bim-UiO-66-Me shows 7.5 and 3.0 times better performance than UiO-66. The higher absorptivity of cationic Bim-UiO-66-Me compared with UiO-66 can be attributed to a strong Coulombic interaction as well as an anion-π interaction and hydrogen bonding between the benzimidazolium functional group and heavy metal oxo-anions. The as-synthesized Bim-UiO-66-Me not only provides a promising candidate for application in removal of heavy metal oxo-anions in wastewater treatment but also opens up a new strategy for the design of high-performance adsorbents.

A Highly Stable Yttrium Organic Framework as a Host for Optical Thermometry and D2 O Detection

The yttrium organic framework (Y_0.89Tb_0.10Eu_0.01)₆(BDC)₇(OH)₄(H₂O)₄ (BDC=benzene‐1,4‐dicarboxylate) is hydrothermally stable up to at least 513 K and thermally stable in air in excess of 673 K. The relative intensities of luminescence of Tb³⁺ and Eu³⁺ are governed by Tb³⁺‐to‐Eu³⁺ phonon‐assisted energy transfer and Tb³⁺‐to‐ligand back transfer and are responsible for the differing temperature‐dependent luminescence of the two ions. This provides a ratiometric luminescent thermometer in the 288–573 K temperature range, not previously seen for MOF materials, with a high sensitivity, 1.69±0.04 % K⁻¹ at 523 K. In aqueous conditions, loosely bound H₂O can be replaced by D₂O in the same material, which modifies decay lifetimes to yield a quantitative luminescent D₂O sensor with a useful sensitivity for practical application.

Luminescent Dimeric Oxalate-Bridged Eu3+/Tb3+-Implanted Arsenotungstates: Tunable Emission, Energy Transfer, and Detection of Ba2+ Ion in Aqueous Solution

Two cases of lanthanide (Ln)-implanted arsenotungstates, K₁₇Na₂H₅[{(As₂W₁₉O₆₇(H₂O))Ln(H₂O)₂}₂(C₂O₄)]·87H₂O (Ln = Eu (1), Ln = Tb (2)) and their codoped derivatives Eu_xTb_1-x-POM (x = 0.01 (3), x = 0.04 (4), x = 0.1 (5), x = 0.2 (6)) were prepared and further characterized by powder X-ray diffraction, infrared spectra, and thermogravimetric analyses. An X-ray structural analysis of 1 and 2 indicates that they both present a dimeric oxalate-bridged Ln³⁺-implanted lanthanide arsenotungstate polyanion structure. Under the O → W LMCT excitation at 265 nm of arsenotungstate polyanions, the emissions of Ln³⁺ ions in 1 and 2 are sensitized and the lifetimes are prolonged. Codoped compounds 3-6 demonstrate a color-tunable emission from green to red by adjusting the Eu³⁺/Tb³⁺ ratio. Emission spectra and time-resolved emission spectroscopic studies were performed for 3 to further authenticate the energy transfer processes from excited arsenotungstates to the Eu³⁺ and Tb³⁺ metal ions and also between the Eu³⁺ and Tb³⁺ centers. More interestingly, 1 is an effective fluorescent probe for the recognition and detection of Ba²⁺ ions in aqueous solution. The optical properties of the Ln-implanted arsenotungstate compounds not only expressly reveal distinctive energy transfer processes in those compounds but also broaden the application of POM-based materials in the fluorescence sensing field.

A water-soluble sensor for distinguishing D2O from H2O by dual-channel absorption/fluorescence ratiometry

A novel D2O optical sensor Cy with integrated great water-solubility, absorption/fluorescence dual-channel ratiometric response and even red-green-blue visual sensing application.

Lanthanide-uranyl phosphonates constructed from diethyl ((phenylsulfonyl)methyl)phosphonate

Lanthanide-uranyl phosphonates possess intriguing crystal structures and huge application prospects, but the construction of these materials remains challenging. In this work, we demonstrate that new uranyl and lanthanide-uranyl sulfonylphosphonates with elegant crystal structures and photophysical properties can be assembled hydrothermally by employing the heterofunctional diethyl phosphonate (diethyl ((phenylsulfonyl)methyl)phosphonate, Et₂L) as a precursor ligand, which provides an effective strategy for the construction of lanthanide-uranyl phosphonates.

Hydrothermal Syntheses of Uranium Oxide Hydrate Materials with Sm(III) Ions: pH-Driven Diversities in Structures and Morphologies and Sm-Doped Porous Uranium Oxides Derived from Their Thermal Decompositions

We report the hydrothermal syntheses of three uranyl oxide hydroxy-hydrate (UOH) materials containing Sm(III) ions (UOH-Sm) by controlling the solution pH and a new way to make Sm-doped porous uranium oxides with different U-to-Sm atomic ratios via their thermal decompositions. While layer-structured UOH-Sm phases with U-to-Sm atomic ratios of 1 (UOH-Sm1) and 4 (UOH-Sm2) were obtained from the reaction of schoepite and samarium nitrate with final solution pH values of over 4, similar reactions without pH adjustment with final solution pH values of less than 4 led to the formation of a uranyl oxide framework (UOF-Sm) with a U-to-Sm atomic ratio of 5.5. The crystal structure of compound UOF-Sm was revealed with synchrotron single-crystal X-ray diffraction and confirmed with transmission electron microscopy. The two-dimensional uranyl oxide hydroxide layers, similar to that for β-U₃O₈, are linked by double pentagonal uranyl polyhedra to form a three-dimensional framework with Sm(III) ions in the channels. Scanning electron microscopy characterization revealed nanoplate crystal morphologies for the two UOH-Sm phases, in contrast to the needle morphology for UOF-Sm. Subsequent thermal treatments led to the formation of Sm-doped uranium oxides, maintaining the original crystal shapes and U-to-Sm ratios but with nanopores. This work demonstrated that the hydrothermal synthesis conditions, especially fine-tuning of the solution pH, have a significant impact on the uranium hydrolysis, thus leading to well-defined products. This will facilitate the targeted syntheses of UOH phases with lanthanide (Ln) ions and explore the subsequent applications of these materials and Ln-doped porous uranium oxides as potential nuclear or functional materials.

Analysis of the Isotopic Purity of D2O with the Characteristic NIR-II Phosphorescence of Singlet Oxygen from a Photostable Polythiophene Photosensitizer

D₂O plays important roles in a variety of fields (such as the nuclear industry and bioorganic analysis), and thus its isotopic purity (H₂O contents) is highly concerned. Due to its highly similar physical properties to H₂O and large excess amounts of H₂O over D₂O, it is challenging to distinguish D₂O from H₂O. On the basis of the characteristic NIR-II phosphorescence of singlet oxygen (¹O₂), and the fact that H₂O is a more efficient quencher for ¹O₂ than D₂O, here, we proposed to simply use the 1275 nm emission of ¹O₂ for the analysis of the isotopic purity of D₂O. In normal cases (a xenon lamp for excitation), such steady-state emission is extremely weak for valid analytical applications, we thus employed laser excitation for intensification. To this goal, a series of photosensitizers were screened, and eventually polythiophene PT10 was selected with high singlet oxygen quantum yield (Φ_Δ = 0.51), high H₂O/D₂O contrast, and excellent photostability. Upon excitation with a 445 nm laser, a limit of detection (LOD, 3σ) of 0.1% for H₂O in D₂O was achieved. The accuracy of the proposed method was verified by the analysis of the isotopic purity of several D₂O samples (with randomly added H₂O). More interestingly, the hygroscopicity of D₂O was sensitively monitored with the proposed probe in a real-time manner; the results of which are important for strengthening the care of D₂O storage and the importance of humidity control during related investigations. Besides D₂O isotopic purity evaluation, this work also indicated the potential usefulness of the NIR-II emission of singlet oxygen in future analytical detection.

A Water-Stable Tb-MOF As a Rapid, Accurate, and Highly Sensitive Ratiometric Luminescent Sensor for the Discriminative Sensing of Antibiotics and D2O in H2O

The design and development of self-calibrating ratiometric luminescent sensors for the fast, accurate, and sensitive discrimination and determination of pollutants in wastewater is highly desirable for public and environmental health. Herein, a 3D porous Tb(III)-based metal-organic framework (MOF), {[Tb(HL)(H₂O)₂]·x(solv)}_n (1), was facilely synthesized using a urea-functionalized tetracarboxylate ligand, 5,5'-(((1,4-phenylenebis(azanediyl))bis(carbonyl))bis(azanediyl))diisophthalic acid (H₄L). The activated framework showed a good water stability in both aqueous solutions at a wide pH range of 2-14 and simulated antibiotic wastewaters. Interestingly, this Tb-MOF exhibited dual luminescence owing to the partial energy transfer from the antenna H₄L to Tb³⁺. More importantly, activated 1 (1a) that was dispersed in water showed a fast, accurate, and highly sensitive discrimination ability toward antibiotics with a good recyclability, discriminating three different classes of antibiotics from each other via the quenching or enhancement of the luminescence and tuning the emission intensity ratio between the H₄L ligand and the Tb³⁺ center for the first time. Simultaneously, 1a is a ratiometric luminescent sensor for the rapid, accurate, and quantitative discrimination of D₂O from H₂O. Furthermore, this complex was successfully used for the effective determination of antibiotics and D₂O in real water samples. This work indicates that 1a represents the first ever MOF material for the discriminative sensing of antibiotics and D₂O in H₂O and promotes the practical application of Ln-MOF-based ratiometric luminescent sensors in monitoring water quality and avoiding any major leak situation.

Tuning of the Network Dimensionality and Photoluminescent Properties in Homo- and Heteroleptic Lanthanide Coordination Polymers

Targeted synthesis, through a heteroleptic methodology, has resulted in three types of lanthanide (Ln) coordination polymers (CPs) with tailored dimensionality, tunable photoluminescent colors, and distinct luminescence quenching upon UV and X-ray irradiation. The homoleptic Ln(tpbz)(NO₃)₂ [CP-1; tpbz = 4-(2,2':6',2″-terpyridin-4'-yl)benzoate] is assembled from Ln cations and bridging tpbz ligands, accompanied by the decoration of NO₃^- anions, forming a one-dimensional (1D) chain structure. The presence of ancillary dicarboxylate linkers, 1,4-benzenedicarboxylate (bdc) and 2,5-thiophenedicarboxylate (tdc), promotes additional bridging between 1D chains to form a two-dimensional layer and a three-dimensional framework for Ln(tpbz)(bdc) (CP-2) and Ln(tpbz)(tdc) (CP-3), respectively. The multicolor and luminescence properties of the obtained CPs were investigated, displaying typical red Eu^III-based and green Tb^III-based emissions. The Sm^III-bearing CP-1-CP-3, however, exhibit diverse ratiometric Ln^III- and ligand-based emissions, with the photoluminescent colors varying from pink to orange to cyan. Notably, the Tb^III-containing CP-1-CP-3 display distinct luminescence quenching upon continuous exposure to UV and X-ray irradiation. To our best knowledge, CP-2-Tb represents one of the most sensitive UV dosage probes (3.2 × 10^-7 J) among all CPs.