Close-Packed Ultrasmooth Self-assembled Monolayer of CsPbBr3 Perovskite Nanocubes

Revival of Degraded CsPbI3 Nanocrystals by Diselenide Ligand and Nanocrystal Self-Assembly on Nanofibrilar Ligand Template

Among the lead halide perovskite (LHP) family, CsPbI3 is known to be significantly vulnerable to moisture, which hinders its use in real device applications. It is reported that chalcogen-based ligands can better stabilize CsPbI3 and revive nanocrystals (NCs). Here, diphenyl diselenide (DPhDSe) ligand is used to revive the degraded CsPbI3 NCs through a post-synthetic treatment of adding a small amount of DPhDSe in the degraded NC dispersion. DPhDSe in the dispersion formed nanofibrillar crystals at a low temperature through the π-π stacking of the phenyl ring. The nanofibrils played as a template on which the NCs self-assembled and they are attached side-by-side to form microfibers. The microfiber powder containing the NCs is optically stable at ambient conditions and morphologically self-healable by mild thermal annealing due to the dynamic Se─Se bond. The mechanism of the structural changes, optical transitions, and chemical changes has been systematically characterized through electron microscopy, diffraction, spectroscopy, and elemental analysis.

Oriented Assembly of Lead Halide Perovskite Nanocrystals

Cesium lead halide nanostructures have highly tunable optical and optoelectronic properties. Establishing precise control in forming perovskite single-crystal nanostructures is key to unlocking the full potential of these materials. However, studying the growth kinetics of colloidal cesium lead halides is challenging due to their sensitivity to light, electron beam, and environmental factors like humidity. In this study, in situ observations of CsPbBr3-particle dynamics were made possible through extremely low dose liquid cell transmission electron microscopy, showing that oriented attachment is the dominant pathway for the growth of single-crystal CsPbBr3 architectures from primary nanocubes. In addition, oriented assembly and fusion of ligand-stabilized cubic CsPbBr3 nanocrystals are promoted by electron beam irradiation or introduction of polar additives that both induce partial desorption of the original ligands and polarize the nanocube surfaces. These findings advance our understanding of cesium lead halide growth mechanisms, aiding the controlled synthesis of other perovskite nanostructures.

High-Precision Calculation of Nanoparticle (Nanocrystal) Potentials of Mean Force and Internal Energies

Thermodynamic stability assessment of nanocrystal systems requires precise free energy calculations. This study highlights the importance of meticulous control over various factors, including the thermostat, time step, potential cutoff, initial configuration, sampling method, and overall simulation duration. Free energy computations in dry (solvent-free) systems are on the order of several hundred kBT but can be obtained with consistent accuracy. However, calculation of internal energies becomes challenging, as they are typically much larger in magnitude than free energies and exhibit significant noise and reduced reliability. To address this limitation, we propose a new internal energy estimate that drastically reduces the noise. We also present formulas that enable the optimization of the parameters of the harmonic bias potential for optimal convergence. Finally, we discuss the implications of these findings for the computation of free energies in nanocrystal clusters and superlattices.

Tuning perovskite nanocrystal superlattices for superradiance in the presence of disorder

The cooperative emission of interacting nanocrystals is an exciting topic fueled by recent reports of superfluorescence and superradiance in assemblies of perovskite nanocubes. Several studies estimated that coherent coupling is localized to a small fraction of nanocrystals (10-7-10-3) within the assembly, raising questions about the origins of localization and ways to overcome it. In this work, we examine single-excitation superradiance by calculating radiative decays and the distribution of superradiant wave function in two-dimensional CsPbBr3 nanocube superlattices. The calculations reveal that the energy disorder caused by size distribution and large interparticle separations reduces radiative coupling and leads to the excitation localization, with the energy disorder being the dominant factor. The single-excitation model clearly predicts that, in the pursuit of cooperative effects, having identical nanocubes in the superlattice is more important than achieving a perfect spatial order. The monolayers of large CsPbBr3 nanocubes (LNC = 10-20 nm) are proposed as model systems for experimental tests of superradiance under conditions of non-negligible size dispersion, while small nanocubes (LNC = 5-10 nm) are preferred for realizing the Dicke state under ideal conditions.

Ligand Effects in Assembly of Cubic and Spherical Nanocrystals: Applications to Packing of Perovskite Nanocubes

We establish the formula representing cubic nanocrystals (NCs) as hard cubes taking into account the role of the ligands and describe how these results generalize to any other NC shapes. We derive the conditions under which the hard cube representation breaks down and provide explicit expressions for the effective size. We verify the results from the detailed potential of mean force calculations for two nanocubes in different orientations as well as with spherical nanocrystals. Our results explicitly demonstrate the relevance of certain ligand conformations, i.e., "vortices", and show that edges and corners provide natural sites for their emergence. We also provide both simulations and experimental results with single component cubic perovskite nanocrystals assembled into simple cubic superlattices, which further corroborate theoretical predictions. In this way, we extend the Orbifold Topological Model (OTM) accounting for the role of ligands beyond spherical nanocrystals and discuss its extension to arbitrary nanocrystal shapes. Our results provide detailed predictions for recent superlattices of perovskite nanocubes and spherical nanocrystals. Problems with existing united atom force fields are discussed.

Metal-Halide Perovskite Nanocrystal Superlattice: Self-Assembly and Optical Fingerprints

Self-assembly of nanocrystals into superlattices is a fascinating process that not only changes geometric morphology, but also creates unique properties that considerably enrich the material toolbox for new applications. Numerous studies have driven the blossoming of superlattices from various aspects. These include precise control of size and morphology, enhancement of properties, exploitation of functions, and integration of the material into miniature devices. The effective synthesis of metal-halide perovskite nanocrystals has advanced research on self-assembly of building blocks into micrometer-sized superlattices. More importantly, these materials exhibit abundant optical features, including highly coherent superfluorescence, amplified spontaneous laser emission, and adjustable spectral redshift, facilitating basic research and state-of-the-art applications. This review summarizes recent advances in the field of metal-halide perovskite superlattices. It begins with basic packing models and introduces various stacking configurations of superlattices. The potential of multiple capping ligands is also discussed and their crucial role in superlattice growth is highlighted, followed by detailed reviews of synthesis and characterization methods. How these optical features can be distinguished and present contemporary applications is then considered. This review concludes with a list of unanswered questions and an outlook on their potential use in quantum computing and quantum communications to stimulate further research in this area.

Preparation and Energy Storage Performance of Perovskite Luminescent Materials by an Electrochemiluminescence Method

In recent years, metal halide perovskites have become attractive photosensitive materials due to their excellent optoelectronic properties. Due to its good characteristics, perovskites are used in solar photovoltaic power generation, light-emitting diodes, photodetectors, photocatalysis, and sensors and many other fields. Considering the wide application of perovskites and the study of potential bifunctional devices, the application of perovskites in energy storage devices is relatively small, and a small number of studies focus on organic-inorganic hybrid lead-halide perovskites. However, the related energy storage research on all-inorganic lead-halide perovskites with better stability, which has also been widely concerned, is very scarce. And nontoxic all-inorganic nonperovskite has zero research in energy storage. Based on the above situation, this paper selects the lead-free perovskite Cs2AgSbCl6, and two lead halide perovskites with different dimensions, -0-dimensional Cs4PbBr6 and 3-dimensional CsPbBr3, these three all-inorganic perovskites. It was for electrochemical performance testing.

Oleic acid/oleylamine ligand pair: a versatile combination in the synthesis of colloidal nanoparticles

A variety of colloidal chemical approaches has been developed in the last few decades for the controlled synthesis of nanostructured materials in either water or organic solvents. Besides the precursors, the solvents, reducing agents, and the choice of surfactants are crucial for tuning the composition, morphology and other properties of the resulting nanoparticles. The ligands employed include thiols, amines, carboxylic acids, phosphines and phosphine oxides. Generally, adding a single ligand to the reaction mixture is not always adequate to yield the desired features. In this review, we discuss in detail the role of the oleic acid/oleylamine ligand pair in the chemical synthesis of nanoparticles. The combined use of these ligands belonging to two different categories of molecules aims to control the size and shape of nanoparticles and prevent their aggregation, not only during their synthesis but also after their dispersion in a carrier solvent. We show how the different binding strengths of these two molecules and their distinct binding modes on specific facets affect the reaction kinetics toward the production of nanostructures with tailored characteristics. Additional functions, such as the reducing function, are also noted, especially for oleylamine. Sometimes, the carboxylic acid will react with the alkylamine to form an acid-base complex, which may serve as a binary capping agent and reductant; however, its reducing capacity may range from lower to much lower than that of oleylamine. The types of nanoparticles synthesized in the simultaneous presence of oleic acid and oleylamine and discussed herein include metal oxides, metal chalcogenides, metals, bimetallic structures, perovskites, upconversion particles and rare earth-based materials. Diverse morphologies, ranging from spherical nanoparticles to anisotropic, core-shell and hetero-structured configurations are presented. Finally, the relation between tuning the resulting surface and volume nanoparticle properties and the relevant applications is highlighted.

Self-Assembly and Regrowth of Metal Halide Perovskite Nanocrystals for Optoelectronic Applications

Over the past decade, the impressive development of metal halide perovskites (MHPs) has made them leading candidates for applications in photovoltaics (PVs), X-ray scintillators, and light-emitting diodes (LEDs). Constructing MHP nanocrystals (NCs) with promising optoelectronic properties using a low-cost approach is critical to realizing their commercial potential. Self-assembly and regrowth techniques provide a simple and powerful “bottom-up” platform for controlling the structure, shape, and dimensionality of MHP NCs. The soft ionic nature of MHP NCs, in conjunction with their low formation energy, rapid anion exchange, and ease of ion migration, enables the rearrangement of their overall appearance via self-assembly or regrowth. Because of their low formation energy and highly dynamic surface ligands, MHP NCs have a higher propensity to regrow than conventional hard-lattice NCs. Moreover, their self-assembly and regrowth can be achieved simultaneously. The self-assembly of NCs into close-packed, long-range-ordered mesostructures provides a platform for modulating their electronic properties (e.g., conductivity and carrier mobility). Moreover, assembled MHP NCs exhibit collective properties (e.g., superfluorescence, renormalized emission, longer phase coherence times, and long exciton diffusion lengths) that can translate into dramatic improvements in device performance. Further regrowth into fused MHP nanostructures with the removal of ligand barriers between NCs could facilitate charge carrier transport, eliminate surface point defects, and enhance stability against moisture, light, and electron-beam irradiation. However, the synthesis strategies, diversity and complexity of structures, and optoelectronic applications that emanate from the self-assembly and regrowth of MHPs have not yet received much attention. Consequently, a comprehensive understanding of the design principles of self-assembled and fused MHP nanostructures will fuel further advances in their optoelectronic applications.

In this Account, we review the latest developments in the self-assembly and regrowth of MHP NCs. We begin with a survey of the mechanisms, driving forces, and techniques for controlling MHP NC self-assembly. We then explore the phase transition of fused MHP nanostructures at the atomic level, delving into the mechanisms of facet-directed connections and the kinetics of their shape-modulation behavior, which have been elucidated with the aid of high-resolution transmission electron microscopy (HRTEM) and first-principles density functional theory calculations of surface energies. We further outline the applications of assembled and fused nanostructures. Finally, we conclude with a perspective on current challenges and future directions in the field of MHP NCs.

State of the Art and Prospects for Halide Perovskite Nanocrystals

Metal-halide perovskites have rapidly emerged as one of the most promising materials of the 21st century, with many exciting properties and great potential for a broad range of applications, from photovoltaics to optoelectronics and photocatalysis. The ease with which metal-halide perovskites can be synthesized in the form of brightly luminescent colloidal nanocrystals, as well as their tunable and intriguing optical and electronic properties, has attracted researchers from different disciplines of science and technology. In the last few years, there has been a significant progress in the shape-controlled synthesis of perovskite nanocrystals and understanding of their properties and applications. In this comprehensive review, researchers having expertise in different fields (chemistry, physics, and device engineering) of metal-halide perovskite nanocrystals have joined together to provide a state of the art overview and future prospects of metal-halide perovskite nanocrystal research.

Intermittency of CsPbBr3 Perovskite Quantum Dots Analyzed by an Unbiased Statistical Analysis

We analyze intermittency in intensity and fluorescence lifetime of CsPbBr3 perovskite quantum dots by applying unbiased Bayesian inference analysis methods. We apply change-point analysis (CPA) and a Bayesian state clustering algorithm to determine the timing of switching events and the number of states between which switching occurs in a statistically unbiased manner, which we have benchmarked particularly to apply to highly multistate emitters. We conclude that perovskite quantum dots display a plethora of gray states in which brightness, broadly speaking, correlates inversely with decay rate, confirming the multiple recombination centers model. We leverage the CPA partitioning analysis to examine aging and memory effects. We find that dots tend to return to the bright state before jumping to a dim state and that when choosing a dim state, they tend to explore the entire set of states available.

Metal Halide Perovskites for Optical Parametric Modulation

Metal halide perovskites (MHPs) have attracted considerable academic and industrial attention because of their remarkable optoelectronic properties. The development of optical parametric modulation is urgently needed because it plays an important role in display applications and optical communication. Perovskites can become the bridge between materials and optics. Through changing the composition and nanostructure of perovskites, we can modulate optical parameters, including optical intensity, frequency, polarization, and phase. This Perspective provides a brief introduction to this field and summarizes the methods of modulating optical parameters. It is instructive for building a relationship between perovskite nanostructures and optics, which is meaningful for display technologies and optical communication.

Aging of Self-Assembled Lead Halide Perovskite Nanocrystal Superlattices: Effects on Photoluminescence and Energy Transfer

Excitonic coupling, electronic coupling, and cooperative interactions in self-assembled lead halide perovskite nanocrystals were reported to give rise to a red-shifted collective emission peak with accelerated dynamics. Here we report that similar spectroscopic features could appear as a result of the nanocrystal reactivity within the self-assembled superlattices. This is demonstrated by studying CsPbBr₃ nanocrystal superlattices over time with room-temperature and cryogenic micro-photoluminescence spectroscopy, X-ray diffraction, and electron microscopy. It is shown that a gradual contraction of the superlattices and subsequent coalescence of the nanocrystals occurs over several days of keeping such structures under vacuum. As a result, a narrow, low-energy emission peak is observed at 4 K with a concomitant shortening of the photoluminescence lifetime due to the energy transfer between nanocrystals. When exposed to air, self-assembled CsPbBr₃ nanocrystals develop bulk-like CsPbBr₃ particles on top of the superlattices. At 4 K, these particles produce a distribution of narrow, low-energy emission peaks with short lifetimes and excitation fluence-dependent, oscillatory decays. Overall, the aging of CsPbBr₃ nanocrystal assemblies dramatically alters their emission properties and that should not be overlooked when studying collective optoelectronic phenomena nor confused with superfluorescence effects.