Tunable Redox-Active Triazenyl-Carbene Platforms: A New Class of Anolytes for Non-Aqueous Organic Redox Flow Batteries

N-Heterocyclic Carbene-Derived Carbon Disulfide Radical Ligands for Palladium Diradicals

N-heterocyclic carbenes (NHCs) are recognized for their ability to stabilize various main group radicals; however, NHC-derived, sulfur-based radicals remain rare. In this study, we successfully synthesized and characterized a series of palladium diradical complexes that featured new sulfur-based radical ligands from NHC-carbon disulfide adducts. Spectroscopic and computational characterizations of the palladium complexes confirmed the open-shell singlet ground state, which resulted from the antiferromagnetic coupling of two unpaired electrons on each ligand. Proton nuclear magnetic resonance relaxometry was used to experimentally confirm the presence of these unpaired electrons. Moreover, the redox behavior of the complexes was localized on the ligand center, confirming the redox activity of the ligands. The discovery of this sulfur-based, redox-active radical ligand underscores the versatility and significance of NHC-derived radicals, thereby expanding the repertoire of radical ligands and opening new avenues for advanced material and catalytic systems.

Synthesis of sterically congested unsymmetrical 1,2-dicarbonyl radicals through a stepwise approach

A simplified and stepwise synthetic method for producing sterically congested unsymmetrical 1,2-dicarbonyl radicals was successfully demonstrated including detailed characterization of each radical cation. Using this approach, an aryl- and N-heterocyclic carbene-substituted 1,2-dicarbonyl radical in its neutral form is generated, revealing the stabilizing role of N-heterocyclic carbenes.

Development of Modular Nitrenium Bipolar Electrolytes for Possible Applications in Symmetric Redox Flow Batteries

Amid the escalating integration of renewable energy sources, the demand for grid energy storage solutions, including non-aqueous organic redox flow batteries (oRFBs), has become ever more pronounced. oRFBs face a primary challenge of irreversible capacity loss attributed to the crossover of redox-active materials between half-cells. A possible solution for the crossover challenge involves utilization of bipolar electrolytes that act as both the catholyte and anolyte. Identifying such molecules poses several challenges as it requires a delicate balance between the stability of both oxidation states and energy density, which is influenced by the separation between the two redox events. We report the development of a diaminotriazolium redox-active core capable of producing two electronically distinct persistent radical species with typically extreme reduction potentials (E1/2red < -2 V, E1/2ox > +1 V, vs Fc0/+) and up to 3.55 V separation between the two redox events. Structure-property optimization studies allowed us to identify factors responsible for fine-tuning of potentials for both redox events, as well as separation between them. Mechanistic studies revealed two primary decomposition pathways for the neutral radical charged species and one for the radical biscation. Additionally, statistical modeling provided evidence for the molecular descriptors to allow identification of the structural features responsible for stability of radical species and to propose more stable analogues.

Synthesis of Carbene-Stabilized PNPN Fragments and Their Carbene-Dependent Redox Properties

Herein, we report the synthesis of carbene-stabilized 1,3-diaza-2,4-diphosphabutenes CAACMePNPNCAACMe 4CAAC (CAACMe = 1-[2,6-bis(isopropyl)phenyl]-3,3,5,5-tetramethyl-2-pyrrolidinylidene) and IPrPNPNIPr 4NHC (IPr = 1,3-Bis(2,6-diisopropylphenyl)-imidazol-2-ylidene). The bonding in both systems is defined by a delocalized polar covalent π-system, with 4NHC exhibiting increased conjugation relative to 4CAAC. The nature of the stabilizing carbene also influences the redox properties of the compound, with 4CAAC undergoing potassium-mediated reduction to the closed-shell P-P bonded dimer K252, which upon treatment with Kryptofix-2,2,2 converts to the transient radical anion [Kcrypt][5], the formal one-electron reduction product of 4CAAC. In contrast, 4NHC undergoes reversible one-electron oxidation to the stable radical cation [6NHC][SbF6]. Computational and spectroscopic analyses of both radical species are suggestive of unevenly delocalized spin, with the bulk of the spin density residing on phosphorus in both cases.

Unveiling Three Interconvertible Redox States of Boraphenalene

Neutral 1-boraphenalene displays the isoelectronic structure of the phenalenyl carbocation and is expected to behave as an attractive organoboron multi-redox system. However, the isolation of new redox states have remained elusive even though the preparation of neutral boron(III)-containing phenalene compounds have been extensively studied. Herein, we have adopted an N-heterocyclic carbene ligand stabilization approach to achieve the first isolation of the stable and ambipolar 1-boraphenalenyl radical 1•. The 1-boraphenalenyl cation 1+ and anion 1- have also been electrochemically observed and chemically isolated, representing new redox forms of boraphenalene for the study of non-Kekulé polynuclear benzenoid molecules. Experimental and theoretical investigations suggest that the interconvertible three-redox-state species undergo reversible electronic structure modifications, which primarily take place on the polycyclic framework of the molecules, exhibiting atypical behavior compared to known donor-stabilized organoboron compounds. Initial reactivity studies, aromaticity evaluations, and photophysical studies show redox-state-dependent trends. While 1+ is luminescent in both the solution and solid states, 1• exhibits boron-centered reactivity and 1- undergoes substitution chemistry on the boraphenalenyl skeleton and serves as a single-electron transfer reductant.

Uncovering Nitrosyl Reactivity at N-Heterocyclic Carbene Center

N-heterocyclic carbenes (NHCs) have garnered much attention due to their unique properties, such as strong σ-donating and π-accepting abilities, as well as their transition-metal-like reactivity toward small molecules. In 2015, we discovered that NHCs can react with nitric oxide (NO) gas to form radical adducts that resemble transition metal nitrosyl complexes. To elucidate the analogy between NHC and transition metal NO adducts, here we have undertaken a systematic investigation of the electron- and proton-transfer chemistry of [NHC-NO]⋅ (N-heterocyclic carbene nitric oxide radical) compounds. We have accessed a suite of compounds, comprised of [NHC-NO]+ , [NHC-NO]- , [NHC-NOH]0 , and [NHC-NHOH]+ species. In particular, [NHC-NO]- was isolated as potassium and lithium ion adducts. Most interestingly, a monomeric potassium [NHC-NO]- compound was isolated with the assistance of 18-crown-6, which is the first instance of a monomeric alkali N-oxyl compound to the best of our knowledge. Our results demonstrate that [NHC-NO]⋅ exhibits redox behavior broadly similar to metal nitrosyl complexes, which opens up more possibilities for utilizing NHCs to build on the known reactivity of metal complexes.

Efficient AcFc-[FeIII (acac)3 ] Redox Couple for Non-aqueous Redox Flow Battery at Low Temperature

The temperature dependency of the electrochemical analysis of acetyl ferrocene (AcFc) and iron(III) acetylacetonate ([Fe(acac)₃ ]) has been investigated for non-aqueous redox flow batteries (NARFBs). AcFc and [Fe(acac)₃ ] were utilized as catholyte and anolyte species, respectively, in an electrochemical cell with a cell voltage of 1.41 V and Coulombic efficiencies >99% for up to 50 total cycles at room temperature (RT, 25 °C). Experiments with a rotating ring disk electrode (RRDE) indicate that the diffusion coefficient reduces with decreasing temperature from 25 °C to 0 °C, yet the overall storage capacity was higher than that of an aqueous redox flow battery (ARFBs). The electrochemical kinetic rate constant (k₀ ) of AcFc was found to be greater than that of [Fe(acac)₃ ]. However, the value of k₀ was not affected by the variable temperature. ¹ H NMR investigations reveal that temperature change during battery trials did not occur in any structural modification. The obtained result demonstrates the suitability of this battery at low temperatures.

Persistent Radicals Derived from N-Heterocyclic Carbenes for Material Applications

Persistent radicals are potential building blocks of novel materials in many fields. Recently, highly stable persistent radicals are considered to be within reach, thanks to several radical stabilization strategies such as spin delocalization and steric protection. N-Heterocyclic carbene (NHC)-derived substituents can be attached to a radical center for these purposes, as illustrated by numerous NHC-stabilized radicals reported in the last two decades.This Account describes our recent work on developing NHC-derived persistent radicals, as well as their prospective applications. Considering that NHCs not only stabilize radicals but also reversibly interact with gas molecules, in 2015 our group reported NHC-nitric oxide (NHC-NO) radicals produced by reversibly trapping nitric oxide (NO) radical gas in NHCs. The resultant compounds were loaded into biocompatible poly(ethylene glycol)-block-poly(caprolactone) (PEG-b-PCL) micelles and injected into tumor-bearing mice. Then, NO release was triggered by high-intensity focused ultrasound irradiation of the tumor tissue. Furthermore, the NHC-NO radicals could also serve as a platform to generate other organic radicals such as oxime ether or iminyl radicals. Apart from medicine-related applications, radicals stabilized by NHCs can be used as energy storage materials. In this context, the triazenyl radical containing two NHC units reported by our laboratory could be a cathode active material in batteries, as an organic alternative to LiCoO₂. The subsequently prepared unsymmetrical triazenyl radical derivatives were applied as anolytes in nonaqueous all-organic redox flow batteries. In addition, a ferrocene-based redox flow battery anolyte was obtained by introducing NHC-derived substituents that effectively stabilize the ferrocenate derivatives previously reported only at low temperatures. The batteries containing NHC-supported radicals exhibited high energy efficiency and insignificant radical decomposition over multiple cycles. Finally, toward developing air-persistent organic radicals for flexible devices and MRI contrasting agents, we also highlight our recent air- and physiologically stable organic radicals derived from NHCs. Coordination of tris(pentafluorophenyl)borane to the NHC-NO radical produced a new radical cation that is stable in an organic solvent under air for several months. The readily accessible 1,2-dicarbonyl radical cations generated by the reaction of NHCs with oxalyl chloride are remarkably persistent even in an aqueous solution for several months. They are also highly stable even under physiological conditions, making them particularly attractive potential candidates for organic MRI contrast agents. We hope that this Account will serve as a guide for the future development of stable NHC-derived organic radicals and draw the attention of the synthetic community to their potential applications in material science.

Versatile Redox-Active Organic Materials for Rechargeable Energy Storage

With the ever-increasing demand on energy storage systems and subsequent mass production, there is an urgent need for the development of batteries with not only improved electrochemical performance but also better sustainability-related features such as environmental friendliness and low production cost. To date, transition metals that are sparse have been centrally employed in energy storage devices ranging from portable lithium ion batteries (e.g., cobalt and nickel) to large-scale redox flow batteries (e.g., vanadium). Toward the sustainable battery chemistry, there are ongoing efforts to replace the transition metal-based electrode materials in these systems to redox-active organic materials (ROMs). Most ROMs are composed of the earth abundant elements (e.g., carbon, nitrogen, oxygen, sulfur), thus are less restrained by the resource, and their production does not require high-energy consuming processes. Furthermore, the structural diversity and chemical tunability of organic compounds make them more attractive for the versatile design of future energy storage systems. Accordingly, the timely development of high-performance ROM-based electrodes would expedite the shift from the current resource-limited battery chemistry to more sustainable energy solutions.In this Account, we provide an overview of the endeavors to employ and develop ROMs as high-performance active materials for various battery systems. Diverse approaches will be introduced starting from the new ROM design mimicking the energy carrying molecules in biological metabolism to the chemical modifications to tailor the properties for specific battery systems. The molecular redesign of ROM, for example, can be carried out by substituting heteroatoms in the redox center, which leads to the enhancement of the redox potential by the inductive effect. Or, tailoring the ROM molecule by removing redox-inactive functionals results in a reduced molecular weight, thereby an increased specific capacity. The intrinsic limitations of ROMs, such as the low electrical conductivity and the dissolving nature, have been under extensive scrutiny; however, they can be partly addressed through efforts including intermolecular fusion and/or nanoscale hybridization with a conducting scaffold. On the other hand, this problematic dissolving nature of ROMs makes them appealing for some new battery configurations such as redox flow batteries that employ the liquid-state active materials. The high solubility and the stability of the ROM were found to be beneficial in attaining the enhanced energy density and the cycle stability of flow batteries, which could be further optimized by the chemical modifications of ROMs. Besides the role of active materials, the redox activity of ROMs has also enabled their use as catalysts to promote the electrode reaction in metal-air batteries. The redox capability of the ROM was often proven to be effective in the solution-based redox mediation that facilitates both the charging and discharging reaction in metal-air batteries. Finally, we conclude this account by proposing the future research directions regarding the fundamental electrochemistry and the further practical development of ROMs for the sustainable rechargeable energy storage.